MIPS: RB532: Use physical addresses for gpio and device controller registers

This patch fixes the misuse of virtual addresses for the GPIO and third
device controller which would lead to problems while accessing ioremap'd
registers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/rb532/gpio.c

@@ -47,8 +47,8 @@ struct mpmc_device dev3;
 static struct resource rb532_gpio_reg0_res[] = {
 	{
 		.name 	= "gpio_reg0",
-		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
-		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.start 	= REGBASE + GPIOBASE,
+		.end 	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
 		.flags 	= IORESOURCE_MEM,
 	}
 };
@@ -56,8 +56,8 @@ static struct resource rb532_gpio_reg0_res[] = {
 static struct resource rb532_dev3_ctl_res[] = {
 	{
 		.name	= "dev3_ctl",
-		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
-		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.start	= REGBASE + DEV3BASE,
+		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
 		.flags	= IORESOURCE_MEM,
 	}
 };

include/asm-mips/mach-rc32434/rb.h

@@ -17,7 +17,8 @@
 
 #include <linux/genhd.h>
 
-#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(0x18000000))
+#define REGBASE		0x18000000
+#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
 #define DEV0BASE	0x010000
 #define DEV0MASK	0x010004
 #define DEV0C		0x010008