iio: imu: bmi323: Add ACPI Match Table

Adds the ACPI match table for ASUS ROG ALLY to load the bmi323
driver with an ACPI match of "BOSC0200", and a comment about duplicate
ACPI identifiers between devices using the bmc150 and bmi323 chips.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216182308.27125-1-jlobue10@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/bmi323/bmi323_i2c.c

@@ -93,6 +93,26 @@ static int bmi323_i2c_probe(struct i2c_client *i2c)
 	return bmi323_core_probe(dev);
 }
 
+static const struct acpi_device_id bmi323_acpi_match[] = {
+	/*
+	 * The "BOSC0200" identifier used here is not unique to bmi323 devices.
+	 * The same "BOSC0200" identifier is found in the ACPI tables of devices
+	 * using the bmc150 chip. This creates a conflict with duplicate ACPI
+	 * identifiers which multiple drivers want to use. If a non-bmi323
+	 * device starts to load with this "BOSC0200" ACPI match here, then the
+	 * chip ID check portion should fail because the chip IDs received (via
+	 * i2c) are unique between bmc150 and bmi323 and the driver should
+	 * relinquish the device. If and when a different driver (such as
+	 * bmc150) starts to load with the "BOSC0200" ACPI match, a short reset
+	 * should ensure that the device is not in a bad state during that
+	 * driver initialization. This device reset does occur in both the
+	 * bmi323 and bmc150 init sequences.
+	 */
+	{ "BOSC0200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, bmi323_acpi_match);
+
 static const struct i2c_device_id bmi323_i2c_ids[] = {
 	{ "bmi323" },
 	{ }
@@ -109,6 +129,7 @@ static struct i2c_driver bmi323_i2c_driver = {
 	.driver = {
 		.name = "bmi323",
 		.of_match_table = bmi323_of_i2c_match,
+		.acpi_match_table = bmi323_acpi_match,
 	},
 	.probe = bmi323_i2c_probe,
 	.id_table = bmi323_i2c_ids,