Commit 3cdfcbfd authored by Paul Mackerras's avatar Paul Mackerras Committed by Michael Ellerman

powerpc: Change analyse_instr so it doesn't modify *regs

The analyse_instr function currently doesn't just work out what an
instruction does, it also executes those instructions whose effect
is only to update CPU registers that are stored in struct pt_regs.
This is undesirable because optprobes uses analyse_instr to work out
if an instruction could be successfully emulated in future.

This changes analyse_instr so it doesn't modify *regs; instead it
stores information in the instruction_op structure to indicate what
registers (GPRs, CR, XER, LR) would be set and what value they would
be set to.  A companion function called emulate_update_regs() can
then use that information to update a pt_regs struct appropriately.

As a minor cleanup, this replaces inline asm using the cntlzw and
cntlzd instructions with calls to __builtin_clz() and __builtin_clzl().
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 93b2d3cf
......@@ -23,9 +23,6 @@ struct pt_regs;
#define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024)
#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064)
/* Emulate instructions that cause a transfer of control. */
extern int emulate_step(struct pt_regs *regs, unsigned int instr);
enum instruction_type {
COMPUTE, /* arith/logical/CR op, etc. */
LOAD,
......@@ -55,11 +52,29 @@ enum instruction_type {
#define INSTR_TYPE_MASK 0x1f
/* Compute flags, ORed in with type */
#define SETREG 0x20
#define SETCC 0x40
#define SETXER 0x80
/* Branch flags, ORed in with type */
#define SETLK 0x20
#define BRTAKEN 0x40
#define DECCTR 0x80
/* Load/store flags, ORed in with type */
#define SIGNEXT 0x20
#define UPDATE 0x40 /* matches bit in opcode 31 instructions */
#define BYTEREV 0x80
/* Barrier type field, ORed in with type */
#define BARRIER_MASK 0xe0
#define BARRIER_SYNC 0x00
#define BARRIER_ISYNC 0x20
#define BARRIER_EIEIO 0x40
#define BARRIER_LWSYNC 0x60
#define BARRIER_PTESYNC 0x80
/* Cacheop values, ORed in with type */
#define CACHEOP_MASK 0x700
#define DCBST 0
......@@ -83,7 +98,36 @@ struct instruction_op {
int update_reg;
/* For MFSPR */
int spr;
u32 ccval;
u32 xerval;
};
extern int analyse_instr(struct instruction_op *op, struct pt_regs *regs,
/*
* Decode an instruction, and return information about it in *op
* without changing *regs.
*
* Return value is 1 if the instruction can be emulated just by
* updating *regs with the information in *op, -1 if we need the
* GPRs but *regs doesn't contain the full register set, or 0
* otherwise.
*/
extern int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
unsigned int instr);
/*
* Emulate an instruction that can be executed just by updating
* fields in *regs.
*/
void emulate_update_regs(struct pt_regs *reg, struct instruction_op *op);
/*
* Emulate instructions that cause a transfer of control,
* arithmetic/logical instructions, loads and stores,
* cache operations and barriers.
*
* Returns 1 if the instruction was emulated successfully,
* 0 if it could not be emulated, or -1 for an instruction that
* should not be emulated (rfid, mtmsrd clearing MSR_RI, etc.).
*/
extern int emulate_step(struct pt_regs *regs, unsigned int instr);
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment