Commit 3ce8866c authored by Saurav Kashyap's avatar Saurav Kashyap Committed by James Bottomley

[SCSI] qla2xxx: Basic infrastructure for dynamic logging.

This patch adds the dynamic logging framework to the qla2xxx driver.
The user will be able to change the logging levels on the fly i.e.
without load/unload of the driver. This also enables logging to be
enabled for a particular section of the driver such as initialization,
device discovery etc.
Signed-off-by: default avatarSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: default avatarGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 573e5913
......@@ -4,10 +4,36 @@
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
/*
* Table for showing the current message id in use for particular level
* Change this table for addition of log/debug messages.
* -----------------------------------------------------
* | Level | Last Value Used |
* -----------------------------------------------------
* | Module Init and Probe | 0x0109 |
* | Mailbox commands | 0x1120 |
* | Device Discovery | 0x207d |
* | Queue Command and IO tracing | 0x304f |
* | DPC Thread | 0x401c |
* | Async Events | 0x5058 |
* | Timer Routines | 0x600d |
* | User Space Interactions | 0x70a1 |
* | Task Management | 0x8032 |
* | AER/EEH | 0x9010 |
* | Virtual Port | 0xa007 |
* | ISP82XX Specific | 0xb028 |
* | MultiQ | 0xc00b |
* | Misc | 0xd00b |
* -----------------------------------------------------
*/
#include "qla_def.h"
#include <linux/delay.h>
static uint32_t ql_dbg_offset = 0x800;
static inline void
qla2xxx_prep_dump(struct qla_hw_data *ha, struct qla2xxx_fw_dump *fw_dump)
{
......@@ -1722,3 +1748,255 @@ qla2x00_dump_buffer_zipped(uint8_t *b, uint32_t size)
printk(KERN_DEBUG "\n");
}
}
/*
* This function is for formatting and logging debug information.
* It is to be used when vha is available. It formats the message
* and logs it to the messages file.
* parameters:
* level: The level of the debug messages to be printed.
* If ql2xextended_error_logging value is correctly set,
* this message will appear in the messages file.
* vha: Pointer to the scsi_qla_host_t.
* id: This is a unique identifier for the level. It identifies the
* part of the code from where the message originated.
* msg: The message to be displayed.
*/
void
ql_dbg(uint32_t level, scsi_qla_host_t *vha, int32_t id, char *msg, ...) {
char pbuf[QL_DBG_BUF_LEN];
va_list ap;
uint32_t len;
struct pci_dev *pdev = NULL;
memset(pbuf, 0, QL_DBG_BUF_LEN);
va_start(ap, msg);
if ((level & ql2xextended_error_logging) == level) {
if (vha != NULL) {
pdev = vha->hw->pdev;
/* <module-name> <pci-name> <msg-id>:<host> Message */
sprintf(pbuf, "%s [%s]-%04x:%ld: ", QL_MSGHDR,
dev_name(&(pdev->dev)), id + ql_dbg_offset,
vha->host_no);
} else
sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
"0000:00:00.0", id + ql_dbg_offset);
len = strlen(pbuf);
vsprintf(pbuf+len, msg, ap);
pr_warning("%s", pbuf);
}
va_end(ap);
}
/*
* This function is for formatting and logging debug information.
* It is to be used when vha is not available and pci is availble,
* i.e., before host allocation. It formats the message and logs it
* to the messages file.
* parameters:
* level: The level of the debug messages to be printed.
* If ql2xextended_error_logging value is correctly set,
* this message will appear in the messages file.
* pdev: Pointer to the struct pci_dev.
* id: This is a unique id for the level. It identifies the part
* of the code from where the message originated.
* msg: The message to be displayed.
*/
void
ql_dbg_pci(uint32_t level, struct pci_dev *pdev, int32_t id, char *msg, ...) {
char pbuf[QL_DBG_BUF_LEN];
va_list ap;
uint32_t len;
if (pdev == NULL)
return;
memset(pbuf, 0, QL_DBG_BUF_LEN);
va_start(ap, msg);
if ((level & ql2xextended_error_logging) == level) {
/* <module-name> <dev-name>:<msg-id> Message */
sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
dev_name(&(pdev->dev)), id + ql_dbg_offset);
len = strlen(pbuf);
vsprintf(pbuf+len, msg, ap);
pr_warning("%s", pbuf);
}
va_end(ap);
}
/*
* This function is for formatting and logging log messages.
* It is to be used when vha is available. It formats the message
* and logs it to the messages file. All the messages will be logged
* irrespective of value of ql2xextended_error_logging.
* parameters:
* level: The level of the log messages to be printed in the
* messages file.
* vha: Pointer to the scsi_qla_host_t
* id: This is a unique id for the level. It identifies the
* part of the code from where the message originated.
* msg: The message to be displayed.
*/
void
ql_log(uint32_t level, scsi_qla_host_t *vha, int32_t id, char *msg, ...) {
char pbuf[QL_DBG_BUF_LEN];
va_list ap;
uint32_t len;
struct pci_dev *pdev = NULL;
memset(pbuf, 0, QL_DBG_BUF_LEN);
va_start(ap, msg);
if (level <= ql_errlev) {
if (vha != NULL) {
pdev = vha->hw->pdev;
/* <module-name> <msg-id>:<host> Message */
sprintf(pbuf, "%s [%s]-%04x:%ld: ", QL_MSGHDR,
dev_name(&(pdev->dev)), id, vha->host_no);
} else
sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
"0000:00:00.0", id);
len = strlen(pbuf);
vsprintf(pbuf+len, msg, ap);
switch (level) {
case 0: /* FATAL LOG */
pr_crit("%s", pbuf);
break;
case 1:
pr_err("%s", pbuf);
break;
case 2:
pr_warn("%s", pbuf);
break;
default:
pr_info("%s", pbuf);
break;
}
}
va_end(ap);
}
/*
* This function is for formatting and logging log messages.
* It is to be used when vha is not available and pci is availble,
* i.e., before host allocation. It formats the message and logs
* it to the messages file. All the messages are logged irrespective
* of the value of ql2xextended_error_logging.
* parameters:
* level: The level of the log messages to be printed in the
* messages file.
* pdev: Pointer to the struct pci_dev.
* id: This is a unique id for the level. It identifies the
* part of the code from where the message originated.
* msg: The message to be displayed.
*/
void
ql_log_pci(uint32_t level, struct pci_dev *pdev, int32_t id, char *msg, ...) {
char pbuf[QL_DBG_BUF_LEN];
va_list ap;
uint32_t len;
if (pdev == NULL)
return;
memset(pbuf, 0, QL_DBG_BUF_LEN);
va_start(ap, msg);
if (level <= ql_errlev) {
/* <module-name> <dev-name>:<msg-id> Message */
sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
dev_name(&(pdev->dev)), id);
len = strlen(pbuf);
vsprintf(pbuf+len, msg, ap);
switch (level) {
case 0: /* FATAL LOG */
pr_crit("%s", pbuf);
break;
case 1:
pr_err("%s", pbuf);
break;
case 2:
pr_warn("%s", pbuf);
break;
default:
pr_info("%s", pbuf);
break;
}
}
va_end(ap);
}
void
ql_dump_regs(uint32_t level, scsi_qla_host_t *vha, int32_t id)
{
int i;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
uint16_t __iomem *mbx_reg;
if ((level & ql2xextended_error_logging) == level) {
if (IS_QLA82XX(ha))
mbx_reg = &reg82->mailbox_in[0];
else if (IS_FWI2_CAPABLE(ha))
mbx_reg = &reg24->mailbox0;
else
mbx_reg = MAILBOX_REG(ha, reg, 0);
ql_dbg(level, vha, id, "Mailbox registers:\n");
for (i = 0; i < 6; i++)
ql_dbg(level, vha, id,
"mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
}
}
void
ql_dump_buffer(uint32_t level, scsi_qla_host_t *vha, int32_t id,
uint8_t *b, uint32_t size)
{
uint32_t cnt;
uint8_t c;
if ((level & ql2xextended_error_logging) == level) {
ql_dbg(level, vha, id, " 0 1 2 3 4 5 6 7 8 "
"9 Ah Bh Ch Dh Eh Fh\n");
ql_dbg(level, vha, id, "----------------------------------"
"----------------------------\n");
ql_dbg(level, vha, id, "");
for (cnt = 0; cnt < size;) {
c = *b++;
printk("%02x", (uint32_t) c);
cnt++;
if (!(cnt % 16))
printk("\n");
else
printk(" ");
}
if (cnt % 16)
ql_dbg(level, vha, id, "\n");
}
}
......@@ -370,3 +370,50 @@ struct qla2xxx_fw_dump {
struct qla81xx_fw_dump isp81;
} isp;
};
#define QL_MSGHDR "qla2xxx"
#define ql_log_fatal 0 /* display fatal errors */
#define ql_log_warn 1 /* display critical errors */
#define ql_log_info 2 /* display all recovered errors */
#define ql_log_all 3 /* This value is only used by ql_errlev.
* No messages will use this value.
* This should be always highest value
* as compared to other log levels.
*/
extern int ql_errlev;
void
ql_dbg(uint32_t, scsi_qla_host_t *vha, int32_t, char *, ...);
void
ql_dbg_pci(uint32_t, struct pci_dev *pdev, int32_t, char *, ...);
void
ql_log(uint32_t, scsi_qla_host_t *vha, int32_t, char *, ...);
void
ql_log_pci(uint32_t, struct pci_dev *pdev, int32_t, char *, ...);
/* Debug Levels */
/* The 0x40000000 is the max value any debug level can have
* as ql2xextended_error_logging is of type signed int
*/
#define ql_dbg_init 0x40000000 /* Init Debug */
#define ql_dbg_mbx 0x20000000 /* MBX Debug */
#define ql_dbg_disc 0x10000000 /* Device Discovery Debug */
#define ql_dbg_io 0x08000000 /* IO Tracing Debug */
#define ql_dbg_dpc 0x04000000 /* DPC Thead Debug */
#define ql_dbg_async 0x02000000 /* Async events Debug */
#define ql_dbg_timer 0x01000000 /* Timer Debug */
#define ql_dbg_user 0x00800000 /* User Space Interations Debug */
#define ql_dbg_taskm 0x00400000 /* Task Management Debug */
#define ql_dbg_aer 0x00200000 /* AER/EEH Debug */
#define ql_dbg_multiq 0x00100000 /* MultiQ Debug */
#define ql_dbg_p3p 0x00080000 /* P3P specific Debug */
#define ql_dbg_vport 0x00040000 /* Virtual Port Debug */
#define ql_dbg_buffer 0x00020000 /* For dumping the buffer/regs */
#define ql_dbg_misc 0x00010000 /* For dumping everything that is not
* not covered by upper categories
*/
#define QL_DBG_BUF_LEN 512
......@@ -439,6 +439,9 @@ extern void qla81xx_fw_dump(scsi_qla_host_t *, int);
extern void qla2x00_dump_regs(scsi_qla_host_t *);
extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
extern void qla2x00_dump_buffer_zipped(uint8_t *, uint32_t);
extern void ql_dump_regs(uint32_t, scsi_qla_host_t *, int32_t);
extern void ql_dump_buffer(uint32_t, scsi_qla_host_t *, int32_t,
uint8_t *, uint32_t);
/*
* Global Function Prototypes in qla_gs.c source file.
......
......@@ -2382,8 +2382,13 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
/*
* Set host adapter parameters.
*/
/*
* BIT_7 in the host-parameters section allows for modification to
* internal driver logging.
*/
if (nv->host_p[0] & BIT_7)
ql2xextended_error_logging = 1;
ql2xextended_error_logging = 0x7fffffff;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
......
......@@ -35,6 +35,10 @@ static struct kmem_cache *srb_cachep;
* CT6 CTX allocation cache
*/
static struct kmem_cache *ctx_cachep;
/*
* error level for logging
*/
int ql_errlev = ql_log_all;
int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO);
......@@ -69,8 +73,17 @@ MODULE_PARM_DESC(ql2xallocfwdump,
int ql2xextended_error_logging;
module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging. 1 - log errors.");
"Option to enable extended error logging,\n"
"\t\tDefault is 0 - no logging. 0x40000000 - Module Init & Probe.\n"
"\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n"
"\t\t0x08000000 - IO tracing. 0x04000000 - DPC Thread.\n"
"\t\t0x02000000 - Async events. 0x01000000 - Timer routines.\n"
"\t\t0x00800000 - User space. 0x00400000 - Task Management.\n"
"\t\t0x00200000 - AER/EEH. 0x00100000 - Multi Q.\n"
"\t\t0x00080000 - P3P Specific. 0x00040000 - Virtual Port.\n"
"\t\t0x00020000 - Buffer Dump. 0x00010000 - Misc.\n"
"\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
"\t\tDo LOGICAL OR of the value to enable more than one level");
int ql2xshiftctondsd = 6;
module_param(ql2xshiftctondsd, int, S_IRUGO);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment