Merge tag 'arc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:
 "Sorry for the late pull request.  Current stuff was ready for a while
  but I was hoping to squeeze in support for almost ready ARC SDP
  platform (and avoid a 2nd pull request), however it seems there are
  still some loose ends which warrant more time.

   - Platform code reduction/moving-up (TB10X no longer needs any
     callbacks)
   - updated boot printing
   - kgdb update for arc gdb 7.5
   - bug fixes (some marked for stable)
   - more code refactoring/consolidation"

* tag 'arc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: boot: cpu feature print enhancements
  ARC: boot: consolidate cross-checking of h/w and s/w
  ARC: unbork FPU save/restore
  ARC: remove extraneous __KERNEL__ guards
  ARC: Update order of registers in KGDB to match GDB 7.5
  ARC: Remove unneeded Kconfig entry NO_DMA
  ARC: BUG() dumps stack after @msg (@msg now same as in generic BUG))
  ARC: refactoring: reduce the scope of some local vars
  ARC: remove gcc mpy heuristics
  ARC: RIP @running_on_hw
  ARC: Update comments about uncached address space
  ARC: rename kconfig option for unaligned emulation
  ARC: [nsimosci] Allow "headless" models to boot
  ARC: [arcfpga] Get rid of ARC_BOARD_ANGEL4 and ARC_BOARD_ML509
  ARC: [arcfpga] Remove more dead code
  ARC: [plat*] move code out of .init_machine into common
  ARC: [arcfpga] consolidate machine description, DT
  ARC: Allow SMP kernel to build/boot on UP-only infrastructure

arch/arc/Kconfig

@@ -9,6 +9,7 @@
 config ARC
 	def_bool y
 	select BUILDTIME_EXTABLE_SORT
+	select COMMON_CLK
 	select CLONE_BACKWARDS
 	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
 	select DEVTMPFS if !INITRAMFS_SOURCE=""
@@ -73,9 +74,6 @@ config STACKTRACE_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config NO_DMA
-	def_bool n
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
@@ -354,7 +352,7 @@ config ARC_CURR_IN_REG
 	  kernel mode. This saves memory access for each such access
 
 
-config ARC_MISALIGN_ACCESS
+config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW

arch/arc/Makefile

@@ -25,7 +25,6 @@ ifdef CONFIG_ARC_CURR_IN_REG
 LINUXINCLUDE	+=  -include ${src}/arch/arc/include/asm/current.h
 endif
 
-upto_gcc42    :=  $(call cc-ifversion, -le, 0402, y)
 upto_gcc44    :=  $(call cc-ifversion, -le, 0404, y)
 atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
 atleast_gcc48 :=  $(call cc-ifversion, -ge, 0408, y)
@@ -60,25 +59,11 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-ARC_LIBGCC				:= -mA7
-cflags-$(CONFIG_ARC_HAS_HW_MPY)		+= -multcost=16
-
 ifndef CONFIG_ARC_HAS_HW_MPY
 	cflags-y	+= -mno-mpy
-
-# newlib for ARC700 assumes MPY to be always present, which is generally true
-# However, if someone really doesn't want MPY, we need to use the 600 ver
-# which coupled with -mno-mpy will use mpy emulation
-# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments,
-# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted
-
-	ifeq ($(upto_gcc42),y)
-		ARC_LIBGCC	:= -marc600
-		cflags-y	+= -multcost=30
-	endif
 endif
 
-LIBGCC	:= $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name)
+LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel
 KBUILD_CFLAGS_MODULE	+= -mlong-calls

arch/arc/boot/dts/angel4.dts

@@ -24,11 +24,6 @@ aliases {
 		serial0 = &arcuart0;
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	/* 256M */
-	};
-
 	fpga {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arc/boot/dts/nsimosci.dts

@@ -20,18 +20,13 @@ chosen {
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
 	};
 
 	aliases {
 		serial0 = &uart0;
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256M */
-	};
-
 	fpga {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arc/configs/fpga_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
 # CONFIG_ARC_HAS_RTSC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
 CONFIG_PREEMPT=y

arch/arc/configs/fpga_noramfs_defconfig

@@ -20,7 +20,6 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
 # CONFIG_ARC_HAS_RTSC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
 CONFIG_PREEMPT=y

arch/arc/configs/nsimosci_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
 # CONFIG_ARC_IDE is not set
 # CONFIG_ARCTANGENT_EMAC is not set
 # CONFIG_ARC_HAS_RTSC is not set

arch/arc/include/asm/arcregs.h

@@ -9,19 +9,16 @@
 #ifndef _ASM_ARC_ARCREGS_H
 #define _ASM_ARC_ARCREGS_H
 
-#ifdef __KERNEL__
-
 /* Build Configuration Registers */
 #define ARC_REG_DCCMBASE_BCR	0x61	/* DCCM Base Addr */
 #define ARC_REG_CRC_BCR		0x62
-#define ARC_REG_DVFB_BCR	0x64
-#define ARC_REG_EXTARITH_BCR	0x65
 #define ARC_REG_VECBASE_BCR	0x68
 #define ARC_REG_PERIBASE_BCR	0x69
-#define ARC_REG_FP_BCR		0x6B	/* Single-Precision FPU */
-#define ARC_REG_DPFP_BCR	0x6C	/* Dbl Precision FPU */
+#define ARC_REG_FP_BCR		0x6B	/* ARCompact: Single-Precision FPU */
+#define ARC_REG_DPFP_BCR	0x6C	/* ARCompact: Dbl Precision FPU */
 #define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
 #define ARC_REG_TIMERS_BCR	0x75
+#define ARC_REG_AP_BCR		0x76
 #define ARC_REG_ICCM_BCR	0x78
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
@@ -31,6 +28,9 @@
 #define ARC_REG_MIXMAX_BCR	0x7e
 #define ARC_REG_BARREL_BCR	0x7f
 #define ARC_REG_D_UNCACH_BCR	0x6A
+#define ARC_REG_BPU_BCR		0xc0
+#define ARC_REG_ISA_CFG_BCR	0xc1
+#define ARC_REG_SMART_BCR	0xFF
 
 /* status32 Bits Positions */
 #define STATUS_AE_BIT		5	/* Exception active */
@@ -191,14 +191,6 @@
 #define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
 #define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
 
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-/* These DPFP regs need to be saved/restored across ctx-sw */
-struct arc_fpu {
-	struct {
-		unsigned int l, h;
-	} aux_dpfp[2];
-};
-#endif
 
 /*
  ***************************************************************
@@ -212,27 +204,19 @@ struct bcr_identity {
 #endif
 };
 
-#define EXTN_SWAP_VALID     0x1
-#define EXTN_NORM_VALID     0x2
-#define EXTN_MINMAX_VALID   0x2
-#define EXTN_BARREL_VALID   0x2
-
-struct bcr_extn {
+struct bcr_isa {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:20, crc:1, ext_arith:2, mul:2, barrel:2, minmax:2,
-		     norm:2, swap:1;
+	unsigned int pad1:23, atomic1:1, ver:8;
 #else
-	unsigned int swap:1, norm:2, minmax:2, barrel:2, mul:2, ext_arith:2,
-		     crc:1, pad:20;
+	unsigned int ver:8, atomic1:1, pad1:23;
 #endif
 };
 
-/* DSP Options Ref Manual */
-struct bcr_extn_mac_mul {
+struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:16, type:8, ver:8;
+	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
 #else
-	unsigned int ver:8, type:8, pad:16;
+	unsigned int ver:8, type:2, cycles:2, dsp:4, x1616:8, pad:8;
 #endif
 };
 
@@ -251,6 +235,7 @@ struct bcr_perip {
 	unsigned int pad:8, sz:8, pad2:8, start:8;
 #endif
 };
+
 struct bcr_iccm {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
@@ -277,8 +262,8 @@ struct bcr_dccm {
 #endif
 };
 
-/* Both SP and DP FPU BCRs have same format */
-struct bcr_fp {
+/* ARCompact: Both SP and DP FPU BCRs have same format */
+struct bcr_fp_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int fast:1, ver:8;
 #else
@@ -286,6 +271,30 @@ struct bcr_fp {
 #endif
 };
 
+struct bcr_timer {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:15, rtsc:1, pad1:6, t1:1, t0:1, ver:8;
+#else
+	unsigned int ver:8, t0:1, t1:1, pad1:6, rtsc:1, pad2:15;
+#endif
+};
+
+struct bcr_bpu_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:19, fam:1, pad:2, ent:2, ver:8;
+#else
+	unsigned int ver:8, ent:2, pad:2, fam:1, pad2:19;
+#endif
+};
+
+struct bcr_generic {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:24, ver:8;
+#else
+	unsigned int ver:8, pad:24;
+#endif
+};
+
 /*
  *******************************************************************
  * Generic structures to hold build configuration used at runtime
@@ -299,6 +308,10 @@ struct cpuinfo_arc_cache {
 	unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6;
 };
 
+struct cpuinfo_arc_bpu {
+	unsigned int ver, full, num_cache, num_pred;
+};
+
 struct cpuinfo_arc_ccm {
 	unsigned int base_addr, sz;
 };
@@ -306,21 +319,25 @@ struct cpuinfo_arc_ccm {
 struct cpuinfo_arc {
 	struct cpuinfo_arc_cache icache, dcache;
 	struct cpuinfo_arc_mmu mmu;
+	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
-	unsigned int timers;
+	struct bcr_isa isa;
+	struct bcr_timer timers;
 	unsigned int vec_base;
 	unsigned int uncached_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
-	struct bcr_extn extn;
+	struct {
+		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
+			     fpu_sp:1, fpu_dp:1, pad2:6,
+			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
+			     pad4:8;
+	} extn;
+	struct bcr_mpy extn_mpy;
 	struct bcr_extn_xymem extn_xymem;
-	struct bcr_extn_mac_mul extn_mac_mul;
-	struct bcr_fp fp, dpfp;
 };
 
 extern struct cpuinfo_arc cpuinfo_arc700[];
 
 #endif /* __ASEMBLY__ */
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_ARC_ARCREGS_H */

arch/arc/include/asm/atomic.h

@@ -9,8 +9,6 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
@@ -170,5 +168,3 @@ ATOMIC_OP(and, &=, and)
 #endif
 
 #endif
-
-#endif

arch/arc/include/asm/bitops.h

@@ -13,8 +13,6 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
@@ -508,6 +506,4 @@ static inline __attribute__ ((const)) int __ffs(unsigned long word)
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
-
 #endif

arch/arc/include/asm/bug.h

@@ -22,9 +22,8 @@ void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #define BUG()	do {								\
+	pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
 	dump_stack();								\
-	pr_warn("Kernel BUG in %s: %s: %d!\n",	\
-		__FILE__, __func__,  __LINE__);	\
 } while (0)
 
 #define HAVE_ARCH_BUG

arch/arc/include/asm/cache.h

@@ -20,7 +20,7 @@
 #define CACHE_LINE_MASK		(~(L1_CACHE_BYTES - 1))
 
 /*
- * ARC700 doesn't cache any access in top 256M.
+ * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF)
  * Ideal for wiring memory mapped peripherals as we don't need to do
  * explicit uncached accesses (LD.di/ST.di) hence more portable drivers
  */

arch/arc/include/asm/current.h

@@ -12,8 +12,6 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
@@ -27,6 +25,4 @@ register struct task_struct *curr_arc asm("r25");
 
 #endif /* ! __ASSEMBLY__ */
 
-#endif	/* __KERNEL__ */
-
 #endif /* _ASM_ARC_CURRENT_H */

arch/arc/include/asm/irqflags.h

@@ -15,8 +15,6 @@
  *  -Conditionally disable interrupts (if they are not enabled, don't disable)
 */
 
-#ifdef __KERNEL__
-
 #include <asm/arcregs.h>
 
 /* status32 Reg bits related to Interrupt Handling */
@@ -169,6 +167,4 @@ static inline int arch_irqs_disabled(void)
 
 #endif	/* __ASSEMBLY__ */
 
-#endif	/* KERNEL */
-
 #endif

arch/arc/include/asm/kgdb.h

@@ -19,7 +19,7 @@
  * register API yet */
 #undef DBG_MAX_REG_NUM
 
-#define GDB_MAX_REGS		39
+#define GDB_MAX_REGS		87
 
 #define BREAK_INSTR_SIZE	2
 #define CACHE_FLUSH_IS_SAFE	1
@@ -33,23 +33,27 @@ static inline void arch_kgdb_breakpoint(void)
 
 extern void kgdb_trap(struct pt_regs *regs);
 
-enum arc700_linux_regnums {
+/* This is the numbering of registers according to the GDB. See GDB's
+ * arc-tdep.h for details.
+ *
+ * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */
+enum arc_linux_regnums {
 	_R0		= 0,
 	_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,
 	_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,
 	_R25, _R26,
-	_BTA		= 27,
-	_LP_START	= 28,
-	_LP_END		= 29,
-	_LP_COUNT	= 30,
-	_STATUS32	= 31,
-	_BLINK		= 32,
-	_FP		= 33,
-	__SP		= 34,
-	_EFA		= 35,
-	_RET		= 36,
-	_ORIG_R8	= 37,
-	_STOP_PC	= 38
+	_FP		= 27,
+	__SP		= 28,
+	_R30		= 30,
+	_BLINK		= 31,
+	_LP_COUNT	= 60,
+	_STOP_PC	= 64,
+	_RET		= 64,
+	_LP_START	= 65,
+	_LP_END		= 66,
+	_STATUS32	= 67,
+	_ECR		= 76,
+	_BTA		= 82,
 };
 
 #else

arch/arc/include/asm/processor.h

@@ -14,12 +14,19 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #include <asm/ptrace.h>
 
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+	struct {
+		unsigned int l, h;
+	} aux_dpfp[2];
+};
+#endif
+
 /* Arch specific stuff which needs to be saved per task.
  * However these items are not so important so as to earn a place in
  * struct thread_info
@@ -128,6 +135,4 @@ extern unsigned int get_wchan(struct task_struct *p);
  */
 #define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASM_ARC_PROCESSOR_H */

arch/arc/include/asm/setup.h

@@ -29,7 +29,6 @@ struct cpuinfo_data {
 };
 
 extern int root_mountflags, end_mem;
-extern int running_on_hw;
 
 void setup_processor(void);
 void __init setup_arch_memory(void);

arch/arc/include/asm/smp.h

@@ -59,7 +59,15 @@ struct plat_smp_ops {
 /* TBD: stop exporting it for direct population by platform */
 extern struct plat_smp_ops  plat_smp_ops;
 
-#endif  /* CONFIG_SMP */
+#else /* CONFIG_SMP */
+
+static inline void smp_init_cpus(void) {}
+static inline const char *arc_platform_smp_cpuinfo(void)
+{
+	return "";
+}
+
+#endif  /* !CONFIG_SMP */
 
 /*
  * ARC700 doesn't support atomic Read-Modify-Write ops.

arch/arc/include/asm/string.h

@@ -17,8 +17,6 @@
 
 #include <linux/types.h>
 
-#ifdef __KERNEL__
-
 #define __HAVE_ARCH_MEMSET
 #define __HAVE_ARCH_MEMCPY
 #define __HAVE_ARCH_MEMCMP
@@ -36,5 +34,4 @@ extern char *strcpy(char *dest, const char *src);
 extern int strcmp(const char *cs, const char *ct);
 extern __kernel_size_t strlen(const char *);
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_ARC_STRING_H */

arch/arc/include/asm/syscalls.h

@@ -9,8 +9,6 @@
 #ifndef _ASM_ARC_SYSCALLS_H
 #define _ASM_ARC_SYSCALLS_H  1
 
-#ifdef __KERNEL__
-
 #include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <linux/types.h>
@@ -22,6 +20,4 @@ int sys_arc_gettls(void);
 
 #include <asm-generic/syscalls.h>
 
-#endif	/* __KERNEL__ */
-
 #endif

arch/arc/include/asm/thread_info.h

@@ -16,8 +16,6 @@
 #ifndef _ASM_THREAD_INFO_H
 #define _ASM_THREAD_INFO_H
 
-#ifdef __KERNEL__
-
 #include <asm/page.h>
 
 #ifdef CONFIG_16KSTACKS
@@ -114,6 +112,4 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
  * syscall, so all that reamins to be tested is _TIF_WORK_MASK
  */
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_THREAD_INFO_H */

arch/arc/include/asm/unaligned.h

@@ -14,7 +14,7 @@
 #include <asm-generic/unaligned.h>
 #include <asm/ptrace.h>
 
-#ifdef CONFIG_ARC_MISALIGN_ACCESS
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
 int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		     struct callee_regs *cregs);
 #else

arch/arc/kernel/Makefile

@@ -16,7 +16,7 @@ obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
 obj-$(CONFIG_SMP) 			+= smp.o
 obj-$(CONFIG_ARC_DW2_UNWIND)		+= unwind.o
 obj-$(CONFIG_KPROBES)      		+= kprobes.o
-obj-$(CONFIG_ARC_MISALIGN_ACCESS) 	+= unaligned.o
+obj-$(CONFIG_ARC_EMUL_UNALIGNED) 	+= unaligned.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_ARC_METAWARE_HLINK)	+= arc_hostlink.o
 obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o

arch/arc/kernel/disasm.c

@@ -15,7 +15,7 @@
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
 
-#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
+#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_EMUL_UNALIGNED) || \
 	defined(CONFIG_KPROBES)
 
 /* disasm_instr: Analyses instruction at addr, stores
@@ -535,4 +535,4 @@ int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
 	return instr.is_branch;
 }
 
-#endif /* CONFIG_KGDB || CONFIG_ARC_MISALIGN_ACCESS || CONFIG_KPROBES */
+#endif /* CONFIG_KGDB || CONFIG_ARC_EMUL_UNALIGNED || CONFIG_KPROBES */

arch/arc/kernel/head.S

@@ -91,16 +91,6 @@ stext:
 	st	r0, [@uboot_tag]
 	st	r2, [@uboot_arg]
 
-	; Identify if running on ISS vs Silicon
-	; 	IDENTITY Reg [ 3  2  1  0 ]
-	;	(chip-id)      ^^^^^		==> 0xffff for ISS
-	lr	r0, [identity]
-	lsr	r3, r0, 16
-	cmp	r3, 0xffff
-	mov.z	r4, 0
-	mov.nz	r4, 1
-	st	r4, [@running_on_hw]
-
 	; setup "current" tsk and optionally cache it in dedicated r25
 	mov	r9, @init_task
 	SET_CURR_TASK_ON_CPU  r9, r0	; r9 = tsk, r0 = scratch

arch/arc/kernel/perf_event.c

@@ -244,25 +244,23 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		pr_err("This core does not have performance counters!\n");
 		return -ENODEV;
 	}
+	BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS);
 
-	arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu),
-			       GFP_KERNEL);
+	READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
+	if (!cc_bcr.v) {
+		pr_err("Performance counters exist, but no countable conditions?\n");
+		return -ENODEV;
+	}
+
+	arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
 	if (!arc_pmu)
 		return -ENOMEM;
 
 	arc_pmu->n_counters = pct_bcr.c;
-	BUG_ON(arc_pmu->n_counters > ARC_PMU_MAX_HWEVENTS);
-
 	arc_pmu->counter_size = 32 + (pct_bcr.s << 4);
-	pr_info("ARC PMU found with %d counters of size %d bits\n",
-		arc_pmu->n_counters, arc_pmu->counter_size);
-
-	READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
-
-	if (!cc_bcr.v)
-		pr_err("Strange! Performance counters exist, but no countable conditions?\n");
 
-	pr_info("ARC PMU has %d countable conditions\n", cc_bcr.c);
+	pr_info("ARC perf\t: %d counters (%d bits), %d countable conditions\n",
+		arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c);
 
 	cc_name.str[8] = 0;
 	for (i = 0; i < PERF_COUNT_HW_MAX; i++)

arch/arc/kernel/smp.c

@@ -101,7 +101,7 @@ void __weak arc_platform_smp_wait_to_boot(int cpu)
 
 const char *arc_platform_smp_cpuinfo(void)
 {
-	return plat_smp_ops.info;
+	return plat_smp_ops.info ? : "";
 }
 
 /*

arch/arc/mm/cache_arc700.c

@@ -530,16 +530,9 @@ EXPORT_SYMBOL(dma_cache_wback);
  */
 void flush_icache_range(unsigned long kstart, unsigned long kend)
 {
-	unsigned int tot_sz, off, sz;
-	unsigned long phy, pfn;
-
-	/* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */
+	unsigned int tot_sz;
 
-	/* This is not the right API for user virtual address */
-	if (kstart < TASK_SIZE) {
-		BUG_ON("Flush icache range for user virtual addr space");
-		return;
-	}
+	WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
 
 	/* Shortcut for bigger flush ranges.
 	 * Here we don't care if this was kernel virtual or phy addr
@@ -572,6 +565,9 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
 	 *     straddles across 2 virtual pages and hence need for loop
 	 */
 	while (tot_sz > 0) {
+		unsigned int off, sz;
+		unsigned long phy, pfn;
+
 		off = kstart % PAGE_SIZE;
 		pfn = vmalloc_to_pfn((void *)kstart);
 		phy = (pfn << PAGE_SHIFT) + off;

arch/arc/mm/tlb.c

@@ -609,14 +609,12 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 	int n = 0;
 	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
 
-	n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ",
-		       p_mmu->ver, TO_KB(p_mmu->pg_sz));
-
 	n += scnprintf(buf + n, len - n,
-		       "J-TLB %d (%dx%d), uDTLB %d, uITLB %d, %s\n",
+		      "MMU [v%x]\t: %dk PAGE, JTLB %d (%dx%d), uDTLB %d, uITLB %d %s\n",
+		       p_mmu->ver, TO_KB(p_mmu->pg_sz),
 		       p_mmu->num_tlb, p_mmu->sets, p_mmu->ways,
 		       p_mmu->u_dtlb, p_mmu->u_itlb,
-		       IS_ENABLED(CONFIG_ARC_MMU_SASID) ? "SASID" : "");
+		       IS_ENABLED(CONFIG_ARC_MMU_SASID) ? ",SASID" : "");
 
 	return buf;
 }

arch/arc/plat-arcfpga/Kconfig

@@ -8,7 +8,7 @@
 
 menuconfig ARC_PLAT_FPGA_LEGACY
 	bool "\"Legacy\" ARC FPGA dev Boards"
-	select ISS_SMP_EXTN if SMP
+	select ARC_HAS_COH_CACHES if SMP
 	help
 	  Support for ARC development boards, provided by Synopsys.
 	  These are based on FPGA or ISS. e.g.
@@ -18,17 +18,6 @@ menuconfig ARC_PLAT_FPGA_LEGACY
 
 if ARC_PLAT_FPGA_LEGACY
 
-config ARC_BOARD_ANGEL4
-	bool "ARC Angel4"
-	default y
-	help
-	  ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based)
-
-config ARC_BOARD_ML509
-	bool "ML509"
-	help
-	  ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based)
-
 config ISS_SMP_EXTN
 	bool "ARC SMP Extensions (ISS Models only)"
 	default n

arch/arc/plat-arcfpga/include/plat/irq.h

-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: Feb 2009
- *  -For AA4 board, IRQ assignments to peripherals
- */
-
-#ifndef __PLAT_IRQ_H
-#define __PLAT_IRQ_H
-
-#define UART0_IRQ	5
-#define UART1_IRQ	10
-#define UART2_IRQ	11
-
-#define IDE_IRQ		13
-#define PCI_IRQ		14
-#define PS2_IRQ		15
-
-#ifdef CONFIG_SMP
-#define IDU_INTERRUPT_0 16
-#endif
-
-#endif

arch/arc/plat-arcfpga/include/plat/memmap.h

-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: Feb 2009
- *  -For AA4 board, System Memory Map for Peripherals etc
- */
-
-#ifndef __PLAT_MEMMAP_H
-#define __PLAT_MEMMAP_H
-
-#define UART0_BASE              0xC0FC1000
-#define UART1_BASE              0xC0FC1100
-
-#define IDE_CONTROLLER_BASE     0xC0FC9000
-
-#define AHB_PCI_HOST_BRG_BASE   0xC0FD0000
-
-#define PGU_BASEADDR            0xC0FC8000
-#define VLCK_ADDR               0xC0FCF028
-
-#define BVCI_LAT_UNIT_BASE      0xC0FED000
-
-#define PS2_BASE_ADDR		0xC0FCC000
-
-#endif

arch/arc/plat-arcfpga/platform.c

@@ -8,37 +8,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
 #include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/console.h>
-#include <linux/of_platform.h>
-#include <asm/setup.h>
-#include <asm/clk.h>
 #include <asm/mach_desc.h>
-#include <plat/memmap.h>
 #include <plat/smp.h>
-#include <plat/irq.h>
-
-static void __init plat_fpga_early_init(void)
-{
-	pr_info("[plat-arcfpga]: registering early dev resources\n");
-
-#ifdef CONFIG_ISS_SMP_EXTN
-	iss_model_init_early_smp();
-#endif
-}
-
-static void __init plat_fpga_populate_dev(void)
-{
-	/*
-	 * Traverses flattened DeviceTree - registering platform devices
-	 * (if any) complete with their resources
-	 */
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 /*----------------------- Machine Descriptions ------------------------------
  *
@@ -48,41 +20,26 @@ static void __init plat_fpga_populate_dev(void)
  * callback set, by matching the DT compatible name.
  */
 
-static const char *aa4_compat[] __initconst = {
+static const char *legacy_fpga_compat[] __initconst = {
 	"snps,arc-angel4",
-	NULL,
-};
-
-MACHINE_START(ANGEL4, "angel4")
-	.dt_compat	= aa4_compat,
-	.init_early	= plat_fpga_early_init,
-	.init_machine	= plat_fpga_populate_dev,
-#ifdef CONFIG_ISS_SMP_EXTN
-	.init_smp	= iss_model_init_smp,
-#endif
-MACHINE_END
-
-static const char *ml509_compat[] __initconst = {
 	"snps,arc-ml509",
 	NULL,
 };
 
-MACHINE_START(ML509, "ml509")
-	.dt_compat	= ml509_compat,
-	.init_early	= plat_fpga_early_init,
-	.init_machine	= plat_fpga_populate_dev,
-#ifdef CONFIG_SMP
+MACHINE_START(LEGACY_FPGA, "legacy_fpga")
+	.dt_compat	= legacy_fpga_compat,
+#ifdef CONFIG_ISS_SMP_EXTN
+	.init_early	= iss_model_init_early_smp,
 	.init_smp	= iss_model_init_smp,
 #endif
 MACHINE_END
 
-static const char *nsimosci_compat[] __initconst = {
+static const char *simulation_compat[] __initconst = {
+	"snps,nsim",
 	"snps,nsimosci",
 	NULL,
 };
 
-MACHINE_START(NSIMOSCI, "nsimosci")
-	.dt_compat	= nsimosci_compat,
-	.init_early	= NULL,
-	.init_machine	= plat_fpga_populate_dev,
+MACHINE_START(SIMULATION, "simulation")
+	.dt_compat	= simulation_compat,
 MACHINE_END

arch/arc/plat-arcfpga/smp.c

@@ -13,9 +13,10 @@
 
 #include <linux/smp.h>
 #include <linux/irq.h>
-#include <plat/irq.h>
 #include <plat/smp.h>
 
+#define IDU_INTERRUPT_0 16
+
 static char smp_cpuinfo_buf[128];
 
 /*

arch/arc/plat-tb10x/Kconfig

@@ -18,7 +18,6 @@
 
 menuconfig ARC_PLAT_TB10X
 	bool "Abilis TB10x"
-	select COMMON_CLK
 	select PINCTRL
 	select PINCTRL_TB10X
 	select PINMUX

arch/arc/plat-tb10x/tb10x.c

@@ -19,21 +19,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-
 #include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <linux/pinctrl/consumer.h>
-
 #include <asm/mach_desc.h>
 
-
-static void __init tb10x_platform_init(void)
-{
-	of_clk_init(NULL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *tb10x_compat[] __initdata = {
 	"abilis,arc-tb10x",
 	NULL,
@@ -41,5 +29,4 @@ static const char *tb10x_compat[] __initdata = {
 
 MACHINE_START(TB10x, "tb10x")
 	.dt_compat	= tb10x_compat,
-	.init_machine	= tb10x_platform_init,
 MACHINE_END