net: atlantic: add defines for 10M and EEE 100M link mode

This patch adds defines for 10M and EEE 100M link modes, which are
supported by A2.

10M support is added in this patch series.
EEE is out of scope, but will be added in a follow-up series.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/aquantia/atlantic/aq_common.h

@@ -50,16 +50,18 @@
 #define AQ_HWREV_1	1
 #define AQ_HWREV_2	2
 
-#define AQ_NIC_RATE_10G        BIT(0)
-#define AQ_NIC_RATE_5G         BIT(1)
-#define AQ_NIC_RATE_5GSR       BIT(2)
-#define AQ_NIC_RATE_2GS        BIT(3)
-#define AQ_NIC_RATE_1G         BIT(4)
-#define AQ_NIC_RATE_100M       BIT(5)
+#define AQ_NIC_RATE_10G		BIT(0)
+#define AQ_NIC_RATE_5G		BIT(1)
+#define AQ_NIC_RATE_5GSR	BIT(2)
+#define AQ_NIC_RATE_2GS		BIT(3)
+#define AQ_NIC_RATE_1G		BIT(4)
+#define AQ_NIC_RATE_100M	BIT(5)
+#define AQ_NIC_RATE_10M		BIT(6)
 
-#define AQ_NIC_RATE_EEE_10G	BIT(6)
-#define AQ_NIC_RATE_EEE_5G	BIT(7)
-#define AQ_NIC_RATE_EEE_2GS	BIT(8)
-#define AQ_NIC_RATE_EEE_1G	BIT(9)
+#define AQ_NIC_RATE_EEE_10G	BIT(7)
+#define AQ_NIC_RATE_EEE_5G	BIT(8)
+#define AQ_NIC_RATE_EEE_2GS	BIT(9)
+#define AQ_NIC_RATE_EEE_1G	BIT(10)
+#define AQ_NIC_RATE_EEE_100M	BIT(11)
 
 #endif /* AQ_COMMON_H */

drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c

@@ -611,6 +611,9 @@ static enum hw_atl_fw2x_rate eee_mask_to_ethtool_mask(u32 speed)
 	if (speed & AQ_NIC_RATE_EEE_1G)
 		rate |= SUPPORTED_1000baseT_Full;
 
+	if (speed & AQ_NIC_RATE_EEE_100M)
+		rate |= SUPPORTED_100baseT_Full;
+
 	return rate;
 }
 

drivers/net/ethernet/aquantia/atlantic/aq_nic.c

@@ -885,6 +885,10 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self,
 		ethtool_link_ksettings_add_link_mode(cmd, supported,
 						     100baseT_Full);
 
+	if (self->aq_nic_cfg.aq_hw_caps->link_speed_msk & AQ_NIC_RATE_10M)
+		ethtool_link_ksettings_add_link_mode(cmd, supported,
+						     10baseT_Full);
+
 	if (self->aq_nic_cfg.aq_hw_caps->flow_control) {
 		ethtool_link_ksettings_add_link_mode(cmd, supported,
 						     Pause);
@@ -924,6 +928,10 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self,
 		ethtool_link_ksettings_add_link_mode(cmd, advertising,
 						     100baseT_Full);
 
+	if (self->aq_nic_cfg.link_speed_msk  & AQ_NIC_RATE_10M)
+		ethtool_link_ksettings_add_link_mode(cmd, advertising,
+						     10baseT_Full);
+
 	if (self->aq_nic_cfg.fc.cur & AQ_NIC_FC_RX)
 		ethtool_link_ksettings_add_link_mode(cmd, advertising,
 						     Pause);
@@ -954,6 +962,10 @@ int aq_nic_set_link_ksettings(struct aq_nic_s *self,
 		speed = cmd->base.speed;
 
 		switch (speed) {
+		case SPEED_10:
+			rate = AQ_NIC_RATE_10M;
+			break;
+
 		case SPEED_100:
 			rate = AQ_NIC_RATE_100M;
 			break;