wil6210: TSO implementation

Driver report supported TSO (v4 & v6) and IP checksum offload
in addition to previously supported features. In data path
skbs are checked for non-zero gso_size, and when detected sent
to additional function for processing TSO SKBs. Since HW does not
fully support TSO, additional effort is required from the driver.
Driver partitions the data into mss sized descriptors which are
then DMAed to the HW.
Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/wil6210/netdev.c

@@ -173,7 +173,9 @@ void *wil_if_alloc(struct device *dev)
 	wil_set_ethtoolops(ndev);
 	ndev->ieee80211_ptr = wdev;
 	ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-			    NETIF_F_SG | NETIF_F_GRO;
+			    NETIF_F_SG | NETIF_F_GRO |
+			    NETIF_F_TSO | NETIF_F_TSO6;
+
 	ndev->features |= ndev->hw_features;
 	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
 	wdev->netdev = ndev;

drivers/net/wireless/ath/wil6210/txrx.h

@@ -291,6 +291,14 @@ struct vring_tx_dma {
 	__le16 length;
 } __packed;
 
+/* TSO type used in dma descriptor d0 bits 11-12 */
+enum {
+	wil_tso_type_hdr = 0,
+	wil_tso_type_first = 1,
+	wil_tso_type_mid  = 2,
+	wil_tso_type_lst  = 3,
+};
+
 /* Rx descriptor - MAC part
  * [dword 0]
  * bit  0.. 3 : tid:4 The QoS (b3-0) TID Field