Commit 3d751eb0 authored by Andrew F. Davis's avatar Andrew F. Davis Committed by Rob Herring

Documentation: dt-bindings: Fix interrupt documentation file path

Fix the incorrect interrupt documentation file path in binding docs.
Signed-off-by: default avatarAndrew F. Davis <afd@ti.com>
Acked-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 1ec21837
...@@ -24,7 +24,7 @@ controller. ...@@ -24,7 +24,7 @@ controller.
- #interrupt-cells : Specifies the number of cells needed to encode an - #interrupt-cells : Specifies the number of cells needed to encode an
interrupt. Shall be set to 2. The first cell defines the interrupt number, interrupt. Shall be set to 2. The first cell defines the interrupt number,
the second encodes the triger flags encoded as described in the second encodes the triger flags encoded as described in
Documentation/devicetree/bindings/interrupts.txt Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupt-parent : The parent interrupt controller. - interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt to the parent controller raised when GPIOs - interrupts : The interrupt to the parent controller raised when GPIOs
generate the interrupts. generate the interrupts.
......
...@@ -24,7 +24,7 @@ Required properties: ...@@ -24,7 +24,7 @@ Required properties:
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number. The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupts.txt Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- gpio-controller : Indicates this device is a GPIO controller. - gpio-controller : Indicates this device is a GPIO controller.
- #gpio-cells : Must be 2. The first cell is the pin number and the - #gpio-cells : Must be 2. The first cell is the pin number and the
......
...@@ -24,7 +24,7 @@ and also the generic series names ...@@ -24,7 +24,7 @@ and also the generic series names
- #interrupt-cells : should be set to 2 for IRQ number and flags - #interrupt-cells : should be set to 2 for IRQ number and flags
The first cell is the IRQ number. The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupts.txt Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupt-parent : The parent interrupt controller. - interrupt-parent : The parent interrupt controller.
Optional properties: Optional properties:
......
...@@ -30,7 +30,7 @@ Optional properties: ...@@ -30,7 +30,7 @@ Optional properties:
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number. The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupts.txt Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- clocks : A list of up to two phandle and clock specifier pairs - clocks : A list of up to two phandle and clock specifier pairs
- clock-names : A list of clock names sorted in the same order as clocks. - clock-names : A list of clock names sorted in the same order as clocks.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment