net: dsa: sja1105: add support for the SJA1110 switch family
The SJA1110 is basically an SJA1105 with more ports, some integrated PHYs (100base-T1 and 100base-TX) and an embedded microcontroller which can be disabled, and the switch core can be controlled by a host running Linux, over SPI. This patch contains: - the static and dynamic config packing functions, for the tables that are common with SJA1105 - one more static config tables which is "unique" to the SJA1110 (actually it is a rehash of stuff that was placed somewhere else in SJA1105): the PCP Remapping Table - a reset and clock configuration procedure for the SJA1110 switch. This resets just the switch subsystem, and gates off the clock which powers on the embedded microcontroller. - an RGMII delay configuration procedure for SJA1110, which is very similar to SJA1105, but different enough for us to be unable to reuse it (this is a pattern that repeats itself) - some adaptations to dynamic config table entries which are no longer programmed in the same way. For example, to delete a VLAN, you used to write an entry through the dynamic reconfiguration interface with the desired VLAN ID, and with the VALIDENT bit set to false. Now, the VLAN table entries contain a TYPE_ENTRY field, which must be set to zero (in a backwards-incompatible way) in order for the entry to be deleted, or to some other entry for the VLAN to match "inner tagged" or "outer tagged" packets. - a similar thing for the static config: the xMII Mode Parameters Table encoding for SGMII and MII (the latter just when attached to a 100base-TX PHY) just isn't what it used to be in SJA1105. They are identical, except there is an extra "special" bit which needs to be set. Set it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment