Commit 3ed768ea authored by Todd Poynor's avatar Todd Poynor Committed by Greg Kroah-Hartman

staging: gasket: apex: convert to standard logging

Drop gasket logging calls in favor of standard logging.
Signed-off-by: default avatarTodd Poynor <toddpoynor@google.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0f647805
......@@ -7,11 +7,13 @@
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/printk.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
......@@ -19,7 +21,6 @@
#include "gasket_core.h"
#include "gasket_interrupt.h"
#include "gasket_logging.h"
#include "gasket_page_table.h"
#include "gasket_sysfs.h"
......@@ -362,11 +363,9 @@ static int apex_add_dev_cb(struct gasket_dev *gasket_dev)
if (retries == APEX_RESET_RETRY) {
if (!page_table_ready)
gasket_log_error(
gasket_dev, "Page table init timed out.");
dev_err(gasket_dev->dev, "Page table init timed out\n");
if (!msix_table_ready)
gasket_log_error(
gasket_dev, "MSI-X table init timed out.");
dev_err(gasket_dev->dev, "MSI-X table init timed out\n");
return -ETIMEDOUT;
}
......@@ -420,12 +419,9 @@ static int apex_device_cleanup(struct gasket_dev *gasket_dev)
gasket_dev, APEX_BAR_INDEX,
APEX_BAR2_REG_SCALAR_CORE_ERROR_STATUS);
gasket_log_debug(
gasket_dev,
"%s 0x%p hib_error 0x%llx scalar_error "
"0x%llx.",
__func__,
gasket_dev, hib_error, scalar_error);
dev_dbg(gasket_dev->dev,
"%s 0x%p hib_error 0x%llx scalar_error 0x%llx\n",
__func__, gasket_dev, hib_error, scalar_error);
if (allow_power_save)
ret = apex_enter_reset(gasket_dev, APEX_CHIP_REINIT_RESET);
......@@ -452,7 +448,7 @@ static int apex_reset(struct gasket_dev *gasket_dev, uint type)
/* We are not in reset - toggle the reset bit so as to force
* re-init of custom block
*/
gasket_log_debug(gasket_dev, "%s: toggle reset.", __func__);
dev_dbg(gasket_dev->dev, "%s: toggle reset\n", __func__);
ret = apex_enter_reset(gasket_dev, type);
if (ret)
......@@ -489,8 +485,8 @@ static int apex_enter_reset(struct gasket_dev *gasket_dev, uint type)
if (gasket_wait_with_reschedule(gasket_dev, APEX_BAR_INDEX,
APEX_BAR2_REG_USER_HIB_DMA_PAUSED, 1, 1,
APEX_RESET_DELAY, APEX_RESET_RETRY)) {
gasket_log_error(gasket_dev,
"DMAs did not quiesce within timeout (%d ms)",
dev_err(gasket_dev->dev,
"DMAs did not quiesce within timeout (%d ms)\n",
APEX_RESET_RETRY * APEX_RESET_DELAY);
return -ETIMEDOUT;
}
......@@ -511,9 +507,8 @@ static int apex_enter_reset(struct gasket_dev *gasket_dev, uint type)
if (gasket_wait_with_reschedule(gasket_dev, APEX_BAR_INDEX,
APEX_BAR2_REG_SCU_3, 1 << 6, 1 << 6,
APEX_RESET_DELAY, APEX_RESET_RETRY)) {
gasket_log_error(
gasket_dev,
"RAM did not shut down within timeout (%d ms)",
dev_err(gasket_dev->dev,
"RAM did not shut down within timeout (%d ms)\n",
APEX_RESET_RETRY * APEX_RESET_DELAY);
return -ETIMEDOUT;
}
......@@ -560,9 +555,8 @@ static int apex_quit_reset(struct gasket_dev *gasket_dev, uint type)
if (gasket_wait_with_reschedule(gasket_dev, APEX_BAR_INDEX,
APEX_BAR2_REG_SCU_3, 1 << 6, 0,
APEX_RESET_DELAY, APEX_RESET_RETRY)) {
gasket_log_error(
gasket_dev,
"RAM did not enable within timeout (%d ms)",
dev_err(gasket_dev->dev,
"RAM did not enable within timeout (%d ms)\n",
APEX_RESET_RETRY * APEX_RESET_DELAY);
return -ETIMEDOUT;
}
......@@ -572,9 +566,8 @@ static int apex_quit_reset(struct gasket_dev *gasket_dev, uint type)
APEX_BAR2_REG_SCU_3,
SCU3_CUR_RST_GCB_BIT_MASK, 0,
APEX_RESET_DELAY, APEX_RESET_RETRY)) {
gasket_log_error(
gasket_dev,
"GCB did not leave reset within timeout (%d ms)",
dev_err(gasket_dev->dev,
"GCB did not leave reset within timeout (%d ms)\n",
APEX_RESET_RETRY * APEX_RESET_DELAY);
return -ETIMEDOUT;
}
......@@ -589,9 +582,8 @@ static int apex_quit_reset(struct gasket_dev *gasket_dev, uint type)
SCU3_RG_PWR_STATE_OVR_BIT_OFFSET);
val1 = gasket_dev_read_32(
gasket_dev, APEX_BAR_INDEX, APEX_BAR2_REG_SCU_3);
gasket_log_debug(
gasket_dev, "Disallow HW clock gating 0x%x -> 0x%x",
val0, val1);
dev_dbg(gasket_dev->dev,
"Disallow HW clock gating 0x%x -> 0x%x\n", val0, val1);
} else {
val0 = gasket_dev_read_32(
gasket_dev, APEX_BAR_INDEX, APEX_BAR2_REG_SCU_3);
......@@ -602,9 +594,8 @@ static int apex_quit_reset(struct gasket_dev *gasket_dev, uint type)
SCU3_RG_PWR_STATE_OVR_BIT_OFFSET);
val1 = gasket_dev_read_32(
gasket_dev, APEX_BAR_INDEX, APEX_BAR2_REG_SCU_3);
gasket_log_debug(
gasket_dev, "Allow HW clock gating 0x%x -> 0x%x", val0,
val1);
dev_dbg(gasket_dev->dev, "Allow HW clock gating 0x%x -> 0x%x\n",
val0, val1);
}
return 0;
......@@ -668,7 +659,7 @@ static long apex_clock_gating(struct gasket_dev *gasket_dev,
if (copy_from_user(&ibuf, argp, sizeof(ibuf)))
return -EFAULT;
gasket_log_debug(gasket_dev, "%s %llu", __func__, ibuf.enable);
dev_dbg(gasket_dev->dev, "%s %llu\n", __func__, ibuf.enable);
if (ibuf.enable) {
/* Quiesce AXI, gate GCB clock. */
......@@ -709,13 +700,13 @@ static ssize_t sysfs_show(
gasket_dev = gasket_sysfs_get_device_data(device);
if (!gasket_dev) {
gasket_nodev_error("No Apex device sysfs mapping found");
dev_err(device, "No Apex device sysfs mapping found\n");
return -ENODEV;
}
gasket_attr = gasket_sysfs_get_attr(device, attr);
if (!gasket_attr) {
gasket_nodev_error("No Apex device sysfs attr data found");
dev_err(device, "No Apex device sysfs attr data found\n");
gasket_sysfs_put_device_data(device, gasket_dev);
return -ENODEV;
}
......@@ -738,8 +729,8 @@ static ssize_t sysfs_show(
gasket_dev->page_table[0]));
break;
default:
gasket_log_debug(
gasket_dev, "Unknown attribute: %s", attr->attr.name);
dev_dbg(gasket_dev->dev, "Unknown attribute: %s\n",
attr->attr.name);
ret = 0;
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment