Commit 3ef52f2a authored by Will Deacon's avatar Will Deacon

ARM: mm: fix numerous hideous errors in proc-arm740.S

The setup code in proc-arm740.S is completely broken and, as far as I
can tell, always has been. I was >this< close to ripping it out, when a
740t core-tile materialised in the office, so I've had a crack at fixing
things up:

	- Fix the ram/flash area calculations so that we actually set
	  the condition flags before testing them...
	- Fix the proc_info structure so that __cpu_io_mmu_flags are
	  defined as 0, placing the __cpu_flush pointer at the correct
	  offset
	- Re-number the registers used during __arm740_setup so that
	  we don't clobber the machine ID et al
	- Advertise Thumb support via the hwcaps, since 740T is the only
	  740 implementation.
Acked-by: default avatarHyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
parent 82d9b0d0
......@@ -77,24 +77,27 @@ __arm740_setup:
mcr p15, 0, r0, c6, c0 @ set area 0, default
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
cmp r3, #0
moveq r0, #0
beq 2f
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
mov r0, #0x06
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
......@@ -137,10 +140,11 @@ __arm740_proc_info:
.long 0x41807400
.long 0xfffffff0
.long 0
.long 0
b __arm740_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT
.long cpu_arm740_name
.long arm740_processor_functions
.long 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment