Commit 3f0d1c67 authored by Mark Brown's avatar Mark Brown Committed by Greg Kroah-Hartman

usb: misc: usb3503: Support operation with no I2C control

Refactor so that register writes for configuration are only performed if
the device has a regmap provided and also register as a platform driver.
This allows the driver to be used to manage GPIO based control of the
device.
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: default avatarDongjin Kim <tobetter@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e5162d40
......@@ -2,9 +2,10 @@ SMSC USB3503 High-Speed Hub Controller
Required properties:
- compatible: Should be "smsc,usb3503" or "smsc,usb3503a".
- reg: Specifies the i2c slave address, it should be 0x08.
Optional properties:
- reg: Specifies the i2c slave address, it is required and should be 0x08
if I2C is used.
- connect-gpios: Should specify GPIO for connect.
- disabled-ports: Should specify the ports unused.
'1' or '2' or '3' are availe for this property to describe the port
......
......@@ -78,22 +78,21 @@ static int usb3503_reset(struct usb3503 *hub, int state)
return 0;
}
static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
static int usb3503_connect(struct usb3503 *hub)
{
struct device *dev = hub->dev;
int err = 0;
int err;
switch (mode) {
case USB3503_MODE_HUB:
usb3503_reset(hub, 1);
usb3503_reset(hub, 1);
if (hub->regmap) {
/* SP_ILOCK: set connect_n, config_n for config */
err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
(USB3503_SPILOCK_CONNECT
(USB3503_SPILOCK_CONNECT
| USB3503_SPILOCK_CONFIG));
if (err < 0) {
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
goto err_hubmode;
return err;
}
/* PDS : Disable For Self Powered Operation */
......@@ -103,7 +102,7 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
hub->port_off_mask);
if (err < 0) {
dev_err(dev, "PDS failed (%d)\n", err);
goto err_hubmode;
return err;
}
}
......@@ -113,7 +112,7 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
USB3503_SELF_BUS_PWR);
if (err < 0) {
dev_err(dev, "CFG1 failed (%d)\n", err);
goto err_hubmode;
return err;
}
/* SP_LOCK: clear connect_n, config_n for hub connect */
......@@ -122,14 +121,27 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
| USB3503_SPILOCK_CONFIG), 0);
if (err < 0) {
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
goto err_hubmode;
return err;
}
}
if (gpio_is_valid(hub->gpio_connect))
gpio_set_value_cansleep(hub->gpio_connect, 1);
if (gpio_is_valid(hub->gpio_connect))
gpio_set_value_cansleep(hub->gpio_connect, 1);
hub->mode = mode;
dev_info(dev, "switched to HUB mode\n");
hub->mode = USB3503_MODE_HUB;
dev_info(dev, "switched to HUB mode\n");
return 0;
}
static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
{
struct device *dev = hub->dev;
int err = 0;
switch (mode) {
case USB3503_MODE_HUB:
err = usb3503_connect(hub);
break;
case USB3503_MODE_STANDBY:
......@@ -145,7 +157,6 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
break;
}
err_hubmode:
return err;
}
......@@ -198,6 +209,9 @@ static int usb3503_probe(struct usb3503 *hub)
hub->mode = mode;
}
if (hub->port_off_mask && !hub->regmap)
dev_err(dev, "Ports disabled with no control interface\n");
if (gpio_is_valid(hub->gpio_intn)) {
err = devm_gpio_request_one(dev, hub->gpio_intn,
GPIOF_OUT_INIT_HIGH, "usb3503 intn");
......@@ -263,6 +277,20 @@ static int usb3503_i2c_probe(struct i2c_client *i2c,
return usb3503_probe(hub);
}
static int usb3503_platform_probe(struct platform_device *pdev)
{
struct usb3503 *hub;
hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
if (!hub) {
dev_err(&pdev->dev, "private data alloc fail\n");
return -ENOMEM;
}
hub->dev = &pdev->dev;
return usb3503_probe(hub);
}
static const struct i2c_device_id usb3503_id[] = {
{ USB3503_I2C_NAME, 0 },
{ }
......@@ -278,7 +306,7 @@ static const struct of_device_id usb3503_of_match[] = {
MODULE_DEVICE_TABLE(of, usb3503_of_match);
#endif
static struct i2c_driver usb3503_driver = {
static struct i2c_driver usb3503_i2c_driver = {
.driver = {
.name = USB3503_I2C_NAME,
.of_match_table = of_match_ptr(usb3503_of_match),
......@@ -287,7 +315,38 @@ static struct i2c_driver usb3503_driver = {
.id_table = usb3503_id,
};
module_i2c_driver(usb3503_driver);
static struct platform_driver usb3503_platform_driver = {
.driver = {
.name = USB3503_I2C_NAME,
.of_match_table = of_match_ptr(usb3503_of_match),
.owner = THIS_MODULE,
},
.probe = usb3503_platform_probe,
};
static int __init usb3503_init(void)
{
int err;
err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
if (err != 0)
pr_err("usb3503: Failed to register I2C driver: %d\n", err);
err = platform_driver_register(&usb3503_platform_driver);
if (err != 0)
pr_err("usb3503: Failed to register platform driver: %d\n",
err);
return 0;
}
module_init(usb3503_init);
static void __exit usb3503_exit(void)
{
platform_driver_unregister(&usb3503_platform_driver);
i2c_del_driver(&usb3503_i2c_driver);
}
module_exit(usb3503_exit);
MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
MODULE_DESCRIPTION("USB3503 USB HUB driver");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment