Commit 3f526696 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Sekhar Nori

ARM: DTS: da850-evm: Enable audio via simple-card

The audio on the board is using McASP <-> tlv320aic3106 codec and we have
LineIn and LineOut jacks.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent 204a87ed
...@@ -52,6 +52,7 @@ tps: tps@48 { ...@@ -52,6 +52,7 @@ tps: tps@48 {
reg = <0x48>; reg = <0x48>;
}; };
tlv320aic3106: tlv320aic3106@18 { tlv320aic3106: tlv320aic3106@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106"; compatible = "ti,tlv320aic3106";
reg = <0x18>; reg = <0x18>;
status = "okay"; status = "okay";
...@@ -142,6 +143,33 @@ vbat: fixedregulator@0 { ...@@ -142,6 +143,33 @@ vbat: fixedregulator@0 {
regulator-max-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
regulator-boot-on; regulator-boot-on;
}; };
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 EVM";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
simple-audio-card,routing =
"LINE1L", "Line In",
"LINE1R", "Line In",
"Line Out", "LLOUT",
"Line Out", "RLOUT";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&link0_codec>;
simple-audio-card,frame-master = <&link0_codec>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp0>;
system-clock-frequency = <24576000>;
};
link0_codec: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <24576000>;
};
};
}; };
/include/ "tps6507x.dtsi" /include/ "tps6507x.dtsi"
...@@ -197,6 +225,7 @@ ldo2_reg: regulator@4 { ...@@ -197,6 +225,7 @@ ldo2_reg: regulator@4 {
}; };
&mcasp0 { &mcasp0 {
#sound-dai-cells = <0>;
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mcasp0_pins>; pinctrl-0 = <&mcasp0_pins>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment