Commit 3f62b46b authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Kumar Gala

ARM: dts: qcom: apq8064 - add i2c3 node for panel.

This patch adds i2c3 node which is used for panel control on IFC6410.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
parent bc0d3076
...@@ -87,6 +87,16 @@ pm8921_l23: l23 { ...@@ -87,6 +87,16 @@ pm8921_l23: l23 {
}; };
}; };
gsbi3: gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c3: i2c@16280000 {
status = "okay";
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
};
};
gsbi@12440000 { gsbi@12440000 {
status = "okay"; status = "okay";
qcom,mode = <GSBI_PROT_I2C>; qcom,mode = <GSBI_PROT_I2C>;
......
...@@ -120,6 +120,13 @@ mux { ...@@ -120,6 +120,13 @@ mux {
function = "gsbi1"; function = "gsbi1";
}; };
}; };
i2c3_pins: i2c3 {
mux {
pins = "gpio8", "gpio9";
function = "gsbi3";
};
};
}; };
intc: interrupt-controller@2000000 { intc: interrupt-controller@2000000 {
...@@ -233,6 +240,26 @@ i2c2: i2c@124a0000 { ...@@ -233,6 +240,26 @@ i2c2: i2c@124a0000 {
}; };
}; };
gsbi3: gsbi@16200000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
reg = <0x16200000 0x100>;
clocks = <&gcc GSBI3_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI3_QUP_CLK>,
<&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
};
};
gsbi7: gsbi@16600000 { gsbi7: gsbi@16600000 {
status = "disabled"; status = "disabled";
compatible = "qcom,gsbi-v1.0.0"; compatible = "qcom,gsbi-v1.0.0";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment