mmc: dw_mmc: Add external dma interface support

DesignWare MMC Controller can supports two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to support these platforms. I've tested it on RK31xx
platform with edmac mode and RK3288 platform with idmac mode.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/Kconfig

@@ -615,15 +615,7 @@ config MMC_DW
 	help
 	  This selects support for the Synopsys DesignWare Mobile Storage IP
 	  block, this provides host support for SD and MMC interfaces, in both
-	  PIO and external DMA modes.
-
-config MMC_DW_IDMAC
-	bool "Internal DMAC interface"
-	depends on MMC_DW
-	help
-	  This selects support for the internal DMAC block within the Synopsys
-	  Designware Mobile Storage IP block. This disables the external DMA
-	  interface.
+	  PIO, internal DMA mode and external DMA mode.
 
 config MMC_DW_PLTFM
 	tristate "Synopsys Designware MCI Support as platform device"
@@ -652,7 +644,6 @@ config MMC_DW_K3
 	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
 	depends on MMC_DW
 	select MMC_DW_PLTFM
-	select MMC_DW_IDMAC
 	help
 	  This selects support for Hisilicon K3 SoC specific extensions to the
 	  Synopsys DesignWare Memory Card Interface driver. Select this option

drivers/mmc/host/dw_mmc-pltfm.c

@@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
 	host->pdata = pdev->dev.platform_data;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	/* Get registers' physical base address */
+	host->phy_regs = (void *)(regs->start);
 	host->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(host->regs))
 		return PTR_ERR(host->regs);

drivers/mmc/host/dw_mmc.h

@@ -148,6 +148,12 @@
 #define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
 					 ((r) & 0xFFF) << 16 | \
 					 ((t) & 0xFFF))
+/* HCON register defines */
+#define DMA_INTERFACE_IDMA		(0x0)
+#define DMA_INTERFACE_DWDMA		(0x1)
+#define DMA_INTERFACE_GDMA		(0x2)
+#define DMA_INTERFACE_NODMA		(0x3)
+#define SDMMC_GET_TRANS_MODE(x)		(((x)>>16) & 0x3)
 /* Internal DMAC interrupt defines */
 #define SDMMC_IDMAC_INT_AI		BIT(9)
 #define SDMMC_IDMAC_INT_NI		BIT(8)

include/linux/mmc/dw_mmc.h

@@ -16,6 +16,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/mmc/core.h>
+#include <linux/dmaengine.h>
 
 #define MAX_MCI_SLOTS	2
 
@@ -40,6 +41,17 @@ enum {
 
 struct mmc_data;
 
+enum {
+	TRANS_MODE_PIO = 0,
+	TRANS_MODE_IDMAC,
+	TRANS_MODE_EDMAC
+};
+
+struct dw_mci_dma_slave {
+	struct dma_chan *ch;
+	enum dma_transfer_direction direction;
+};
+
 /**
  * struct dw_mci - MMC controller state shared between all slots
  * @lock: Spinlock protecting the queue and associated data.
@@ -154,7 +166,14 @@ struct dw_mci {
 	dma_addr_t		sg_dma;
 	void			*sg_cpu;
 	const struct dw_mci_dma_ops	*dma_ops;
+	/* For idmac */
 	unsigned int		ring_size;
+
+	/* For edmac */
+	struct dw_mci_dma_slave *dms;
+	/* Registers's physical base address */
+	void                    *phy_regs;
+
 	u32			cmd_status;
 	u32			data_status;
 	u32			stop_cmdr;
@@ -208,8 +227,8 @@ struct dw_mci {
 struct dw_mci_dma_ops {
 	/* DMA Ops */
 	int (*init)(struct dw_mci *host);
-	void (*start)(struct dw_mci *host, unsigned int sg_len);
-	void (*complete)(struct dw_mci *host);
+	int (*start)(struct dw_mci *host, unsigned int sg_len);
+	void (*complete)(void *host);
 	void (*stop)(struct dw_mci *host);
 	void (*cleanup)(struct dw_mci *host);
 	void (*exit)(struct dw_mci *host);