Commit 3ff427f0 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard

ARM: dts: sun7i: Enable USB DRC on orangepi-mini

Enable the otg/drc usb controller on the orangepi-mini.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 5b3abbee
...@@ -156,7 +156,18 @@ &mmc3 { ...@@ -156,7 +156,18 @@ &mmc3 {
status = "okay"; status = "okay";
}; };
&otg_sram {
status = "okay";
};
&pio { &pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10"; allwinner,pins = "PH10";
allwinner,function = "gpio_in"; allwinner,function = "gpio_in";
...@@ -225,6 +236,10 @@ &reg_ldo2 { ...@@ -225,6 +236,10 @@ &reg_ldo2 {
regulator-name = "avcc"; regulator-name = "avcc";
}; };
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus { &reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>; pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
...@@ -243,7 +258,21 @@ &uart0 { ...@@ -243,7 +258,21 @@ &uart0 {
status = "okay"; status = "okay";
}; };
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy { &usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>; usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>; usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay"; status = "okay";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment