Merge tag 'fixes-non-critical-for-linus' of...

Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "Here's a small collection of fixes accrued during the last release
  that weren't considered severe enough to merge during the -rc series.

  A few of these are around resurrecting TI81xx support that's been
  broken for quite a while, the rest are smaller fixes -- most for PXA
  but a few across the board.

  There are also some updates to MAINTAINERS here, in particular for
  Broadcom platforms"

* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  MAINTAINERS: fix git repositories for Broadcom SoCs
  ARM: pxa: fix broken isa interrupts for zeus and viper
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
  ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken
  ARM: AM43xx: hwmod: set DSS submodule parent hwmods
  ARM: OMAP2+: hwmod: print error if wait_target_ready() failed
  MAINTAINERS: add maintainer for OMAP hwmod data
  ARM: OMAP2+: Disable omap3 PM init for ti81xx
  ARM: OMAP2+: Fix reboot for 81xx
  ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init
  ARM: OMAP2+: Fix ti81xx class type
  ARM: OMAP2+: Fix ti81xx devtype
  ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks
  MAINTAINERS: add a git entry for BMIPS-based BCM7xxx SoCs
  MAINTAINERS: add a git entry for BCM7xxx ARM-based SoCs
  MAINTAINERS: update Broadcom Cygnus SoC git tree
  MAINTAINERS: move BCM63xx ARM-based SoCs git tree
  hx4700: regulator: declare full constraints
  ARM: pxa: add regulator_has_full_constraints to spitz board file
  ARM: pxa: add regulator_has_full_constraints to poodle board file
  ...

MAINTAINERS

@@ -2144,7 +2144,7 @@ F:	arch/arm/boot/dts/bcm470*
 BROADCOM BCM63XX ARM ARCHITECTURE
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org
-T:	git git://git.github.com/brcm/linux.git
+T:	git git://github.com/broadcom/arm-bcm63xx.git
 S:	Maintained
 F:	arch/arm/mach-bcm/bcm63xx.c
 F:	arch/arm/include/debug/bcm63xx.S
@@ -2161,6 +2161,7 @@ M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
 F:	arch/arm/boot/dts/bcm7*.dts*
@@ -2170,6 +2171,7 @@ BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	linux-mips@linux-mips.org
+T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/mips/bmips/*
 F:	arch/mips/include/asm/mach-bmips/*
@@ -2212,7 +2214,7 @@ M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	bcm-kernel-feedback-list@broadcom.com
-T:	git git://git.github.com/brcm/linux.git
+T:	git git://github.com/broadcom/cygnus-linux.git
 S:	Maintained
 N:	iproc
 N:	cygnus
@@ -7044,6 +7046,12 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod.*
 
+OMAP HWMOD DATA
+M:	Paul Walmsley <paul@pwsan.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/mach-omap2/omap_hwmod*data*
+
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <bcousson@baylibre.com>
 L:	linux-omap@vger.kernel.org

arch/arm/mach-omap2/Makefile

@@ -58,6 +58,7 @@ AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
+obj-$(CONFIG_SOC_TI81XX)		+= ti81xx-restart.o
 obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_SOC_AM43XX)		+= omap4-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o

arch/arm/mach-omap2/clock.c

@@ -620,6 +620,9 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
 
 	for (i = 0; i < num_clocks; i++) {
 		init_clk = clk_get(NULL, clk_names[i]);
+		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+				clk_names[i]))
+			continue;
 		clk_prepare_enable(init_clk);
 	}
 }

arch/arm/mach-omap2/common.h

@@ -118,7 +118,8 @@ void omap3630_init_early(void);
 void omap3_init_early(void);	/* Do not use this one */
 void am33xx_init_early(void);
 void am35xx_init_early(void);
-void ti81xx_init_early(void);
+void ti814x_init_early(void);
+void ti816x_init_early(void);
 void am33xx_init_early(void);
 void am43xx_init_early(void);
 void am43xx_init_late(void);
@@ -171,6 +172,14 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
 }
 #endif
 
+#ifdef CONFIG_SOC_TI81XX
+void ti81xx_restart(enum reboot_mode mode, const char *cmd);
+#else
+static inline void ti81xx_restart(enum reboot_mode mode, const char *cmd)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
 	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_restart(enum reboot_mode mode, const char *cmd);

arch/arm/mach-omap2/control.h

@@ -53,6 +53,7 @@
 #define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
 
 /* TI81XX spefic control submodules */
+#define TI81XX_CONTROL_DEVBOOT		0x040
 #define TI81XX_CONTROL_DEVCONF		0x600
 
 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
@@ -246,6 +247,9 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
+/* TI81XX CONTROL_DEVBOOT register offsets */
+#define TI81XX_CONTROL_STATUS		(TI81XX_CONTROL_DEVBOOT + 0x000)
+
 /* TI81XX CONTROL_DEVCONF register offsets */
 #define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 

arch/arm/mach-omap2/id.c

@@ -56,6 +56,8 @@ int omap_type(void)
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	} else if (cpu_is_ti81xx()) {
+		val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
 	} else if (soc_is_am33xx() || soc_is_am43xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {

arch/arm/mach-omap2/io.c

@@ -492,9 +492,28 @@ void __init am35xx_init_early(void)
 		omap_clk_soc_init = am35xx_dt_clk_init;
 }
 
-void __init ti81xx_init_early(void)
+void __init ti814x_init_early(void)
 {
-	omap2_set_globals_tap(OMAP343X_CLASS,
+	omap2_set_globals_tap(TI814X_CLASS,
+			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
+	omap3xxx_check_revision();
+	ti81xx_check_features();
+	omap3xxx_voltagedomains_init();
+	omap3xxx_powerdomains_init();
+	omap3xxx_clockdomains_init();
+	omap3xxx_hwmod_init();
+	omap_hwmod_init_postsetup();
+	if (of_have_populated_dt())
+		omap_clk_soc_init = ti81xx_dt_clk_init;
+}
+
+void __init ti816x_init_early(void)
+{
+	omap2_set_globals_tap(TI816X_CLASS,
 			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
 				  NULL);
@@ -509,8 +528,6 @@ void __init ti81xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	if (of_have_populated_dt())
 		omap_clk_soc_init = ti81xx_dt_clk_init;
-	else
-		omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -551,7 +568,6 @@ void __init am35xx_init_late(void)
 void __init ti81xx_init_late(void)
 {
 	omap_common_late_init();
-	omap3_pm_init();
 	omap2_clk_enable_autoidle_all();
 }
 #endif

arch/arm/mach-omap2/omap_hwmod.c

@@ -2155,7 +2155,7 @@ static int _enable(struct omap_hwmod *oh)
 		if (soc_ops.disable_module)
 			soc_ops.disable_module(oh);
 		_disable_clocks(oh);
-		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
+		pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n",
 		       oh->name, r);
 
 		if (oh->clkdm)

arch/arm/mach-omap2/omap_hwmod_43xx_data.c

@@ -498,6 +498,7 @@ static struct omap_hwmod am43xx_dss_dispc_hwmod = {
 		},
 	},
 	.dev_attr	= &am43xx_dss_dispc_dev_attr,
+	.parent_hwmod	= &am43xx_dss_core_hwmod,
 };
 
 /* rfbi */
@@ -512,6 +513,7 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
 			.clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
 		},
 	},
+	.parent_hwmod	= &am43xx_dss_core_hwmod,
 };
 
 /* Interfaces */

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -819,7 +819,8 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &dra7xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3main1_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+			   HWMOD_SWSUP_SIDLE),
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {
@@ -2017,7 +2018,7 @@ static struct omap_hwmod dra7xx_uart3_hwmod = {
 	.class		= &dra7xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
 	.main_clk	= "uart3_gfclk_mux",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,

arch/arm/mach-omap2/powerdomains3xxx_data.c

@@ -464,7 +464,7 @@ void __init omap3xxx_powerdomains_init(void)
 {
 	unsigned int rev;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !cpu_is_ti81xx())
 		return;
 
 	pwrdm_register_platform_funcs(&omap3_pwrdm_operations);

arch/arm/mach-omap2/prm_common.c

@@ -581,6 +581,10 @@ static const struct of_device_id omap_prcm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm" },
 	{ .compatible = "ti,am4-prcm" },
 	{ .compatible = "ti,am4-scrm" },
+	{ .compatible = "ti,dm814-prcm" },
+	{ .compatible = "ti,dm814-scrm" },
+	{ .compatible = "ti,dm816-prcm" },
+	{ .compatible = "ti,dm816-scrm" },
 	{ .compatible = "ti,omap2-prcm" },
 	{ .compatible = "ti,omap2-scrm" },
 	{ .compatible = "ti,omap3-prm" },

arch/arm/mach-omap2/soc.h

@@ -423,13 +423,13 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
 #define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
 
-#define TI816X_CLASS		0x81600034
+#define TI816X_CLASS		0x81600081
 #define TI8168_REV_ES1_0	TI816X_CLASS
 #define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
 #define TI8168_REV_ES2_0	(TI816X_CLASS | (0x2 << 8))
 #define TI8168_REV_ES2_1	(TI816X_CLASS | (0x3 << 8))
 
-#define TI814X_CLASS		0x81400034
+#define TI814X_CLASS		0x81400081
 #define TI8148_REV_ES1_0	TI814X_CLASS
 #define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
 #define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))

arch/arm/mach-omap2/ti81xx-restart.c

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "control.h"
+#include "prm3xxx.h"
+
+#define TI81XX_PRM_DEVICE_RSTCTRL	0x00a0
+#define TI81XX_GLOBAL_RST_COLD		BIT(1)
+
+/**
+ * ti81xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC.  For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c.  No return value.
+ *
+ * NOTE: Warm reset does not seem to work, may require resetting
+ * clocks to bypass mode.
+ */
+void ti81xx_restart(enum reboot_mode mode, const char *cmd)
+{
+	omap2_prm_set_mod_reg_bits(TI81XX_GLOBAL_RST_COLD, 0,
+				   TI81XX_PRM_DEVICE_RSTCTRL);
+	while (1);
+}

arch/arm/mach-omap2/timer.c

@@ -147,6 +147,8 @@ static const struct of_device_id omap_timer_match[] __initconst = {
 	{ .compatible = "ti,omap3430-timer", },
 	{ .compatible = "ti,omap4430-timer", },
 	{ .compatible = "ti,omap5430-timer", },
+	{ .compatible = "ti,dm814-timer", },
+	{ .compatible = "ti,dm816-timer", },
 	{ .compatible = "ti,am335x-timer", },
 	{ .compatible = "ti,am335x-timer-1ms", },
 	{ }

arch/arm/mach-pxa/Kconfig

@@ -6,7 +6,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA27X_DT
 	bool "Support PXA27x platforms from device tree"
-	select CPU_PXA27x
 	select POWER_SUPPLY
 	select PXA27x
 	select USE_OF
@@ -84,14 +83,12 @@ config ARCH_VIPER
 	select I2C_GPIO if I2C=y
 	select ISA
 	select PXA25x
-	select PXA_HAVE_ISA_IRQS
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
 	select ARCOM_PCMCIA
 	select ISA
 	select PXA27x
-	select PXA_HAVE_ISA_IRQS
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
@@ -691,9 +688,6 @@ config SHARPSL_PM_MAX1111
 	select SPI
 	select SPI_MASTER
 
-config PXA_HAVE_ISA_IRQS
-	bool
-
 config PXA310_ULPI
 	bool
 

arch/arm/mach-pxa/corgi.c

@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -752,6 +753,8 @@ static void __init corgi_init(void)
 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_corgi(struct tag *tags, char **cmdline)

arch/arm/mach-pxa/hx4700.c

@@ -893,6 +893,8 @@ static void __init hx4700_init(void)
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
 	mdelay(10);
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")

arch/arm/mach-pxa/include/mach/irqs.h

@@ -12,14 +12,10 @@
 #ifndef __ASM_MACH_IRQS_H
 #define __ASM_MACH_IRQS_H
 
-#ifdef CONFIG_PXA_HAVE_ISA_IRQS
-#define PXA_ISA_IRQ(x)	(x)
-#define PXA_ISA_IRQ_NUM	(16)
-#else
-#define PXA_ISA_IRQ_NUM	(0)
-#endif
+#include <asm/irq.h>
 
-#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
+#define PXA_ISA_IRQ(x)	(x)
+#define PXA_IRQ(x)	(NR_IRQS_LEGACY + (x))
 
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
 #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */

arch/arm/mach-pxa/poodle.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -455,6 +456,7 @@ static void __init poodle_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_poodle(struct tag *tags, char **cmdline)

arch/arm/mach-pxa/spitz.c

@@ -979,6 +979,8 @@ static void __init spitz_init(void)
 	spitz_nand_init();
 	spitz_i2c_init();
 	spitz_audio_init();
+
+	regulator_has_full_constraints();
 }
 
 static void __init spitz_fixup(struct tag *tags, char **cmdline)