Merge bk://kernel.bkbits.net/jgarzik/via-crypto-2.5

into ppc970.osdl.org:/home/torvalds/v2.5/linux

drivers/net/hp100.c

@@ -2862,7 +2862,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 	SET_MODULE_OWNER(dev);
 	SET_NETDEV_DEV(dev, &edev->dev);
 
-	err = hp100_probe1(dev, edev->base_addr, HP100_BUS_EISA, NULL);
+	err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
 	if (err)
 		goto out1;
 

drivers/net/pcnet32.c

@@ -1452,11 +1452,12 @@ pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev)
     status = 0x8300;
     entry = (lp->cur_tx - lp->dirty_tx) & TX_RING_MOD_MASK;
     if ((lp->ltint) &&
-	((entry == TX_RING_SIZE/2) ||
+	((entry == TX_RING_SIZE/3) ||
+	 (entry == (TX_RING_SIZE*2)/3) ||
 	 (entry >= TX_RING_SIZE-2)))
     {
 	/* Enable Successful-TxDone interrupt if we have
-	 * 1/2 of, or nearly all of, our ring buffer Tx'd
+	 * 1/3, 2/3 or nearly all of, our ring buffer Tx'd
 	 * but not yet cleaned up.  Thus, most of the time,
 	 * we will not enable Successful-TxDone interrupts.
 	 */

drivers/scsi/ata_piix.c

@@ -28,12 +28,13 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"1.00"
+#define DRV_VERSION	"1.01"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
 	ICH5_PCS		= 0x92,	/* port control and status */
 
+	PIIX_FLAG_CHECKINTR	= (1 << 29), /* make sure PCI INTx enabled */
 	PIIX_FLAG_COMBINED	= (1 << 30), /* combined mode possible */
 
 	PIIX_COMB_PRI		= (1 << 0), /* combined mode, PATA primary */
@@ -163,7 +164,8 @@ static struct ata_port_info piix_port_info[] = {
 	/* ich5_pata */
 	{
 		.sht		= &piix_sht,
-		.host_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.host_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
+				  PIIX_FLAG_CHECKINTR,
 		.pio_mask	= 0x03,	/* pio3-4 */
 		.udma_mask	= ATA_UDMA_MASK_40C, /* FIXME: cbl det */
 		.port_ops	= &piix_pata_ops,
@@ -172,8 +174,8 @@ static struct ata_port_info piix_port_info[] = {
 	/* ich5_sata */
 	{
 		.sht		= &piix_sht,
-		.host_flags	= ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
-				  ATA_FLAG_SRST,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_SRST |
+				  PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
 		.pio_mask	= 0x03,	/* pio3-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 ; FIXME */
 		.port_ops	= &piix_sata_ops,
@@ -518,6 +520,18 @@ static void piix_probe_combined (struct pci_dev *pdev, unsigned int *mask)
 		*mask |= PIIX_COMB_PRI;
 }
 
+/* move to PCI layer, integrate w/ MSI stuff */
+static void pci_enable_intx(struct pci_dev *pdev)
+{
+	u16 pci_command;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+	if (pci_command & PCI_COMMAND_INTX_DISABLE) {
+		pci_command &= ~PCI_COMMAND_INTX_DISABLE;
+		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
+	}
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -552,6 +566,15 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (port_info[0]->host_flags & PIIX_FLAG_COMBINED)
 		piix_probe_combined(pdev, &combined);
 
+	/* On ICH5, some BIOSen disable the interrupt using the
+	 * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
+	 * On ICH6, this bit has the same effect, but only when
+	 * MSI is disabled (and it is disabled, as we don't use
+	 * message-signalled interrupts currently).
+	 */
+	if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
+		pci_enable_intx(pdev);
+
 	if (combined & PIIX_COMB_PRI)
 		sata_comb = 1;
 	else if (combined & PIIX_COMB_SEC)

drivers/scsi/libata-core.c

@@ -34,6 +34,7 @@
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/interrupt.h>
+#include <linux/suspend.h>
 #include <scsi/scsi.h>
 #include "scsi.h"
 #include "hosts.h"
@@ -2600,6 +2601,10 @@ static int ata_thread (void *data)
 
                 if (signal_pending (current))
                         flush_signals(current);
+                        
+                if (current->flags & PF_FREEZE)
+			refrigerator(PF_IOTHREAD);
+                                                        
 
                 if ((timeout < 0) || (ap->time_to_die))
                         break;

drivers/scsi/sata_promise.c

@@ -35,7 +35,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"0.90"
+#define DRV_VERSION	"0.91"
 
 
 enum {
@@ -1014,6 +1014,14 @@ static void pdc_eng_timeout(struct ata_port *ap)
 		goto out;
 	}
 
+	/* hack alert!  We cannot use the supplied completion
+	 * function from inside the ->eh_strategy_handler() thread.
+	 * libata is the only user of ->eh_strategy_handler() in
+	 * any kernel, so the default scsi_done() assumes it is
+	 * not being called from the SCSI EH.
+	 */
+	qc->scsidone = scsi_finish_command;
+
 	switch (qc->tf.protocol) {
 	case ATA_PROT_DMA_READ:
 	case ATA_PROT_DMA_WRITE: