Skip to content

L
linux
Commit 40c8bec3 authored by Jon Mason's avatar Jon Mason Committed by Stephen Boyd
Browse files
Options

clk: iproc: Separate status and control variables 

Some PLLs have separate registers for Status and Control.  The means the
pll_base needs to be split into 2 new variables, so that those PLLs can
specify device tree registers for those independently.  Also, add a new
driver flag to identify this presence of the split, and let the driver
know that additional registers need to be used.
Signed-off-by: default avatarJon Mason <jonmason@broadcom.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent f713c6bf
Show whitespace changes
Inline Side-by-side
Showing with 62 additions and 40 deletions
drivers/clk/bcm/clk-iproc-pll.c
View file @ 40c8bec3
......@@ -74,7 +74,8 @@ struct iproc_clk {
};
struct iproc_pll {
void __iomem *pll_base;
void __iomem *status_base;
void __iomem *control_base;
void __iomem *pwr_base;
void __iomem *asiu_base;
......@@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
for (i = 0; i < LOCK_DELAY; i++) {
u32 val = readl(pll->pll_base + ctrl->status.offset);
u32 val = readl(pll->status_base + ctrl->status.offset);
if (val & (1 << ctrl->status.shift))
return 0;
......@@ -145,7 +146,7 @@ static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
writel(val, base + offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
base == pll->pll_base))
(base == pll->status_base || base == pll->control_base)))
val = readl(base + offset);
}
......@@ -161,9 +162,9 @@ static void __pll_disable(struct iproc_pll *pll)
}
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
val = readl(pll->pll_base + ctrl->aon.offset);
val = readl(pll->control_base + ctrl->aon.offset);
val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
if (pll->pwr_base) {
......@@ -184,9 +185,9 @@ static int __pll_enable(struct iproc_pll *pll)
u32 val;
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
val = readl(pll->pll_base + ctrl->aon.offset);
val = readl(pll->control_base + ctrl->aon.offset);
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
if (pll->pwr_base) {
......@@ -213,9 +214,9 @@ static void __pll_put_in_reset(struct iproc_pll *pll)
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
val = readl(pll->pll_base + reset->offset);
val = readl(pll->control_base + reset->offset);
val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
......@@ -226,17 +227,17 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
val = readl(pll->pll_base + dig_filter->offset);
val = readl(pll->control_base + dig_filter->offset);
val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
ka << dig_filter->ka_shift;
iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
val = readl(pll->pll_base + reset->offset);
val = readl(pll->control_base + reset->offset);
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
......@@ -291,9 +292,9 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
/* put PLL in reset */
__pll_put_in_reset(pll);
iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.u_offset, 0);
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
if (rate >= VCO_LOW && rate < VCO_MID)
val |= (1 << PLL_VCO_LOW_SHIFT);
......@@ -303,29 +304,29 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
else
val |= (1 << PLL_VCO_HIGH_SHIFT);
iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.l_offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
/* program integer part of NDIV */
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
val = readl(pll->control_base + ctrl->ndiv_int.offset);
val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
val |= vco->ndiv_int << ctrl->ndiv_int.shift;
iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_int.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
/* program fractional part of NDIV */
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
ctrl->ndiv_frac.shift);
val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_frac.offset,
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
val);
}
/* program PDIV */
val = readl(pll->pll_base + ctrl->pdiv.offset);
val = readl(pll->control_base + ctrl->pdiv.offset);
val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
val |= vco->pdiv << ctrl->pdiv.shift;
iproc_pll_write(pll, pll->pll_base, ctrl->pdiv.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
__pll_bring_out_reset(pll, kp, ka, ki);
......@@ -372,7 +373,7 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
return 0;
/* PLL needs to be locked */
val = readl(pll->pll_base + ctrl->status.offset);
val = readl(pll->status_base + ctrl->status.offset);
if ((val & (1 << ctrl->status.shift)) == 0) {
clk->rate = 0;
return 0;
......@@ -383,13 +384,13 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
*
* ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
*/
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
val = readl(pll->control_base + ctrl->ndiv_int.offset);
ndiv_int = (val >> ctrl->ndiv_int.shift) &
bit_mask(ctrl->ndiv_int.width);
ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
bit_mask(ctrl->ndiv_frac.width);
......@@ -398,7 +399,7 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
ndiv_frac;
}
val = readl(pll->pll_base + ctrl->pdiv.offset);
val = readl(pll->control_base + ctrl->pdiv.offset);
pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
......@@ -463,14 +464,14 @@ static int iproc_clk_enable(struct clk_hw *hw)
u32 val;
/* channel enable is active low */
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.enable_shift);
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
/* also make sure channel is not held */
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.hold_shift);
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
return 0;
}
......@@ -485,9 +486,9 @@ static void iproc_clk_disable(struct clk_hw *hw)
if (ctrl->flags & IPROC_CLK_AON)
return;
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val |= 1 << ctrl->enable.enable_shift;
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
}
static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
......@@ -502,7 +503,7 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
if (parent_rate == 0)
return 0;
val = readl(pll->pll_base + ctrl->mdiv.offset);
val = readl(pll->control_base + ctrl->mdiv.offset);
mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
if (mdiv == 0)
mdiv = 256;
......@@ -549,14 +550,14 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
if (div > 256)
return -EINVAL;
val = readl(pll->pll_base + ctrl->mdiv.offset);
val = readl(pll->control_base + ctrl->mdiv.offset);
if (div == 256) {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
} else {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
val |= div << ctrl->mdiv.shift;
}
iproc_pll_write(pll, pll->pll_base, ctrl->mdiv.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
clk->rate = parent_rate / div;
return 0;
......@@ -581,9 +582,10 @@ static void iproc_pll_sw_cfg(struct iproc_pll *pll)
if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
u32 val;
val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
val = readl(pll->control_base + ctrl->sw_ctrl.offset);
val |= BIT(ctrl->sw_ctrl.shift);
iproc_pll_write(pll, pll->pll_base, ctrl->sw_ctrl.offset, val);
iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
val);
}
}
......@@ -618,8 +620,8 @@ void __init iproc_pll_clk_setup(struct device_node *node,
if (WARN_ON(!pll->clks))
goto err_clks;
pll->pll_base = of_iomap(node, 0);
if (WARN_ON(!pll->pll_base))
pll->control_base = of_iomap(node, 0);
if (WARN_ON(!pll->control_base))
goto err_pll_iomap;
/* Some SoCs do not require the pwr_base, thus failing is not fatal */
......@@ -632,6 +634,16 @@ void __init iproc_pll_clk_setup(struct device_node *node,
goto err_asiu_iomap;
}
if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
/* Some SoCs have a split status/control. If this does not
* exist, assume they are unified.
*/
pll->status_base = of_iomap(node, 2);
if (!pll->status_base)
goto err_status_iomap;
} else
pll->status_base = pll->control_base;
/* initialize and register the PLL itself */
pll->ctrl = pll_ctrl;
......@@ -702,6 +714,10 @@ void __init iproc_pll_clk_setup(struct device_node *node,
clk_unregister(pll->clk_data.clks[i]);
err_pll_register:
if (pll->status_base != pll->control_base)
iounmap(pll->status_base);
err_status_iomap:
if (pll->asiu_base)
iounmap(pll->asiu_base);
......@@ -709,7 +725,7 @@ void __init iproc_pll_clk_setup(struct device_node *node,
if (pll->pwr_base)
iounmap(pll->pwr_base);
iounmap(pll->pll_base);
iounmap(pll->control_base);
err_pll_iomap:
kfree(pll->clks);
......
drivers/clk/bcm/clk-iproc.h
View file @ 40c8bec3
......@@ -54,6 +54,12 @@
*/
#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
/*
* Some PLLs have separate registers for Status and Control. Identify this to
* let the driver know if additional registers need to be used
*/
#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
/*
* Parameters for VCO frequency configuration
*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7