Commit 4132a778 authored by Nícolas F. R. A. Prado's avatar Nícolas F. R. A. Prado Committed by Mark Brown

ASoC: mediatek: mt8186: Allow setting shared clocks from machine driver

Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: default avatarNícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-9-nfraprado@collabora.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent b3821f78
......@@ -189,6 +189,9 @@ unsigned int mt8186_rate_transform(struct device *dev,
unsigned int mt8186_tdm_relatch_rate_transform(struct device *dev,
unsigned int rate);
int mt8186_dai_i2s_set_share(struct mtk_base_afe *afe, const char *main_i2s_name,
const char *secondary_i2s_name);
int mt8186_dai_set_priv(struct mtk_base_afe *afe, int id,
int priv_size, const void *priv_data);
......
......@@ -1184,6 +1184,32 @@ static int mt8186_dai_i2s_get_share(struct mtk_base_afe *afe)
return 0;
}
/**
* mt8186_dai_i2s_set_share() - Set up I2S ports to share a single clock.
* @afe: Pointer to &struct mtk_base_afe
* @main_i2s_name: The name of the I2S port that will provide the clock
* @secondary_i2s_name: The name of the I2S port that will use this clock
*/
int mt8186_dai_i2s_set_share(struct mtk_base_afe *afe, const char *main_i2s_name,
const char *secondary_i2s_name)
{
struct mtk_afe_i2s_priv *secondary_i2s_priv;
int main_i2s_id;
secondary_i2s_priv = get_i2s_priv_by_name(afe, secondary_i2s_name);
if (!secondary_i2s_priv)
return -EINVAL;
main_i2s_id = get_i2s_id_by_name(afe, main_i2s_name);
if (main_i2s_id < 0)
return main_i2s_id;
secondary_i2s_priv->share_i2s_id = main_i2s_id;
return 0;
}
EXPORT_SYMBOL_GPL(mt8186_dai_i2s_set_share);
static int mt8186_dai_i2s_set_priv(struct mtk_base_afe *afe)
{
int i;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment