Commit 414f552a authored by Ladislav Michl's avatar Ladislav Michl Committed by Tony Lindgren

omap1: Use gen_nand

Since omapnand driver never find its way into mainline, switch to gen_nand instead.
Following patch is compile tested only, but it is based on code I wrote for
NetStar board and runtime tested it there.
Signed-off-by: default avatarLadislav Michl <ladis@linux-mips.org>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Kevin Hilman <kjh@hilman.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent e2b18e30
...@@ -31,7 +31,6 @@ ...@@ -31,7 +31,6 @@
#include <mach/gpio.h> #include <mach/gpio.h>
#include <plat/mux.h> #include <plat/mux.h>
#include <plat/fpga.h> #include <plat/fpga.h>
#include <plat/nand.h>
#include <plat/keypad.h> #include <plat/keypad.h>
#include <plat/common.h> #include <plat/common.h>
#include <plat/board.h> #include <plat/board.h>
...@@ -174,8 +173,40 @@ static struct platform_device nor_device = { ...@@ -174,8 +173,40 @@ static struct platform_device nor_device = {
.resource = &nor_resource, .resource = &nor_resource,
}; };
static struct omap_nand_platform_data nand_data = { static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
.options = NAND_SAMSUNG_LP_OPTIONS, {
struct nand_chip *this = mtd->priv;
unsigned long mask;
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define FSAMPLE_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
}
static const char *part_probes[] = { "cmdlinepart", NULL };
static struct platform_nand_data nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
}; };
static struct resource nand_resource = { static struct resource nand_resource = {
...@@ -185,7 +216,7 @@ static struct resource nand_resource = { ...@@ -185,7 +216,7 @@ static struct resource nand_resource = {
}; };
static struct platform_device nand_device = { static struct platform_device nand_device = {
.name = "omapnand", .name = "gen_nand",
.id = 0, .id = 0,
.dev = { .dev = {
.platform_data = &nand_data, .platform_data = &nand_data,
...@@ -243,13 +274,6 @@ static struct platform_device *devices[] __initdata = { ...@@ -243,13 +274,6 @@ static struct platform_device *devices[] __initdata = {
&lcd_device, &lcd_device,
}; };
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct omap_nand_platform_data *data)
{
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_lcd_config fsample_lcd_config __initdata = { static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal", .ctrl_name = "internal",
}; };
...@@ -260,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { ...@@ -260,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = {
static void __init omap_fsample_init(void) static void __init omap_fsample_init(void)
{ {
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG(); BUG();
nand_data.dev_ready = nand_dev_ready; gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
......
...@@ -41,7 +41,6 @@ ...@@ -41,7 +41,6 @@
#include <plat/mux.h> #include <plat/mux.h>
#include <plat/dma.h> #include <plat/dma.h>
#include <plat/tc.h> #include <plat/tc.h>
#include <plat/nand.h>
#include <plat/irda.h> #include <plat/irda.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/keypad.h> #include <plat/keypad.h>
...@@ -180,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { ...@@ -180,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = {
}, },
}; };
/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
static struct omap_nand_platform_data h2_nand_data = { {
.options = NAND_SAMSUNG_LP_OPTIONS, struct nand_chip *this = mtd->priv;
.parts = h2_nand_partitions, unsigned long mask;
.nr_parts = ARRAY_SIZE(h2_nand_partitions),
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}
static const char *h2_part_probes[] = { "cmdlinepart", NULL };
struct platform_nand_data h2_nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
.partitions = h2_nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = h2_part_probes,
},
.ctrl = {
.cmd_ctrl = h2_nand_cmd_ctl,
.dev_ready = h2_nand_dev_ready,
},
}; };
static struct resource h2_nand_resource = { static struct resource h2_nand_resource = {
...@@ -192,10 +223,10 @@ static struct resource h2_nand_resource = { ...@@ -192,10 +223,10 @@ static struct resource h2_nand_resource = {
}; };
static struct platform_device h2_nand_device = { static struct platform_device h2_nand_device = {
.name = "omapnand", .name = "gen_nand",
.id = 0, .id = 0,
.dev = { .dev = {
.platform_data = &h2_nand_data, .platform_data = &h2_nand_platdata,
}, },
.num_resources = 1, .num_resources = 1,
.resource = &h2_nand_resource, .resource = &h2_nand_resource,
...@@ -378,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { ...@@ -378,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config }, { OMAP_TAG_LCD, &h2_lcd_config },
}; };
#define H2_NAND_RB_GPIO_PIN 62
static void __init h2_init(void) static void __init h2_init(void)
{ {
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
......
...@@ -43,7 +43,6 @@ ...@@ -43,7 +43,6 @@
#include <mach/irqs.h> #include <mach/irqs.h>
#include <plat/mux.h> #include <plat/mux.h>
#include <plat/tc.h> #include <plat/tc.h>
#include <plat/nand.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/keypad.h> #include <plat/keypad.h>
#include <plat/dma.h> #include <plat/dma.h>
...@@ -182,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { ...@@ -182,11 +181,43 @@ static struct mtd_partition nand_partitions[] = {
}, },
}; };
/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
static struct omap_nand_platform_data nand_data = { {
.options = NAND_SAMSUNG_LP_OPTIONS, struct nand_chip *this = mtd->priv;
.parts = nand_partitions, unsigned long mask;
.nr_parts = ARRAY_SIZE(nand_partitions),
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(H3_NAND_RB_GPIO_PIN);
}
static const char *part_probes[] = { "cmdlinepart", NULL };
struct platform_nand_data nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(nand_partitions),
.partitions = nand_partitions,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
}; };
static struct resource nand_resource = { static struct resource nand_resource = {
...@@ -194,10 +225,10 @@ static struct resource nand_resource = { ...@@ -194,10 +225,10 @@ static struct resource nand_resource = {
}; };
static struct platform_device nand_device = { static struct platform_device nand_device = {
.name = "omapnand", .name = "gen_nand",
.id = 0, .id = 0,
.dev = { .dev = {
.platform_data = &nand_data, .platform_data = &nand_platdata,
}, },
.num_resources = 1, .num_resources = 1,
.resource = &nand_resource, .resource = &nand_resource,
...@@ -342,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { ...@@ -342,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
}, },
}; };
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data)
{
return gpio_get_value(H3_NAND_RB_GPIO_PIN);
}
static void __init h3_init(void) static void __init h3_init(void)
{ {
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
...@@ -366,7 +390,7 @@ static void __init h3_init(void) ...@@ -366,7 +390,7 @@ static void __init h3_init(void)
nand_resource.end += SZ_4K - 1; nand_resource.end += SZ_4K - 1;
if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG(); BUG();
nand_data.dev_ready = nand_dev_ready; gpio_direction_input(H3_NAND_RB_GPIO_PIN);
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */
......
...@@ -31,7 +31,6 @@ ...@@ -31,7 +31,6 @@
#include <mach/gpio.h> #include <mach/gpio.h>
#include <plat/mux.h> #include <plat/mux.h>
#include <plat/fpga.h> #include <plat/fpga.h>
#include <plat/nand.h>
#include <plat/keypad.h> #include <plat/keypad.h>
#include <plat/common.h> #include <plat/common.h>
#include <plat/board.h> #include <plat/board.h>
...@@ -141,8 +140,40 @@ static struct platform_device nor_device = { ...@@ -141,8 +140,40 @@ static struct platform_device nor_device = {
.resource = &nor_resource, .resource = &nor_resource,
}; };
static struct omap_nand_platform_data nand_data = { static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
.options = NAND_SAMSUNG_LP_OPTIONS, {
struct nand_chip *this = mtd->priv;
unsigned long mask;
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static const char *part_probes[] = { "cmdlinepart", NULL };
static struct platform_nand_data nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
}; };
static struct resource nand_resource = { static struct resource nand_resource = {
...@@ -152,7 +183,7 @@ static struct resource nand_resource = { ...@@ -152,7 +183,7 @@ static struct resource nand_resource = {
}; };
static struct platform_device nand_device = { static struct platform_device nand_device = {
.name = "omapnand", .name = "gen_nand",
.id = 0, .id = 0,
.dev = { .dev = {
.platform_data = &nand_data, .platform_data = &nand_data,
...@@ -211,13 +242,6 @@ static struct platform_device *devices[] __initdata = { ...@@ -211,13 +242,6 @@ static struct platform_device *devices[] __initdata = {
&lcd_device, &lcd_device,
}; };
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct omap_nand_platform_data *data)
{
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_lcd_config perseus2_lcd_config __initdata = { static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal", .ctrl_name = "internal",
}; };
...@@ -230,7 +254,7 @@ static void __init omap_perseus2_init(void) ...@@ -230,7 +254,7 @@ static void __init omap_perseus2_init(void)
{ {
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG(); BUG();
nand_data.dev_ready = nand_dev_ready; gpio_direction_input(P2_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment