tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy

To avoid code duplication between the old tpm_tis and the new and future
native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked,
so that all common logic is extracted and can be reused from all drivers.

The core methods can also be used from other TIS like drivers.

itpm workaround is now managed with a specific tis flag
TPM_TIS_ITPM_POSSIBLE.

This commit is based on the initial work by Peter Huewe.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

drivers/char/tpm/Kconfig

@@ -24,9 +24,16 @@ menuconfig TCG_TPM
 
 if TCG_TPM
 
+config TCG_TIS_CORE
+	tristate
+	---help---
+	TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
+	into the TPM kernel APIs. Physical layers will register against it.
+
 config TCG_TIS
 	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
 	depends on X86
+	select TCG_TIS_CORE
 	---help---
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO

drivers/char/tpm/Makefile

@@ -12,6 +12,7 @@ ifdef CONFIG_TCG_IBMVTPM
 	tpm-y += tpm_eventlog.o tpm_of.o
 endif
 endif
+obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
 obj-$(CONFIG_TCG_TIS) += tpm_tis.o
 obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o
 obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o

drivers/char/tpm/tpm_tis_core.h

@@ -25,11 +25,70 @@
 
 #include "tpm.h"
 
+enum tis_access {
+	TPM_ACCESS_VALID = 0x80,
+	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+	TPM_ACCESS_REQUEST_PENDING = 0x04,
+	TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+	TPM_STS_VALID = 0x80,
+	TPM_STS_COMMAND_READY = 0x40,
+	TPM_STS_GO = 0x20,
+	TPM_STS_DATA_AVAIL = 0x10,
+	TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum tis_int_flags {
+	TPM_GLOBAL_INT_ENABLE = 0x80000000,
+	TPM_INTF_BURST_COUNT_STATIC = 0x100,
+	TPM_INTF_CMD_READY_INT = 0x080,
+	TPM_INTF_INT_EDGE_FALLING = 0x040,
+	TPM_INTF_INT_EDGE_RISING = 0x020,
+	TPM_INTF_INT_LEVEL_LOW = 0x010,
+	TPM_INTF_INT_LEVEL_HIGH = 0x008,
+	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+	TPM_INTF_STS_VALID_INT = 0x002,
+	TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+	TIS_MEM_LEN = 0x5000,
+	TIS_SHORT_TIMEOUT = 750,	/* ms */
+	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
+};
+
+/* Some timeout values are needed before it is known whether the chip is
+ * TPM 1.0 or TPM 2.0.
+ */
+#define TIS_TIMEOUT_A_MAX	max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
+#define TIS_TIMEOUT_B_MAX	max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
+#define TIS_TIMEOUT_C_MAX	max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
+#define TIS_TIMEOUT_D_MAX	max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
+
+#define	TPM_ACCESS(l)			(0x0000 | ((l) << 12))
+#define	TPM_INT_ENABLE(l)		(0x0008 | ((l) << 12))
+#define	TPM_INT_VECTOR(l)		(0x000C | ((l) << 12))
+#define	TPM_INT_STATUS(l)		(0x0010 | ((l) << 12))
+#define	TPM_INTF_CAPS(l)		(0x0014 | ((l) << 12))
+#define	TPM_STS(l)			(0x0018 | ((l) << 12))
+#define	TPM_STS3(l)			(0x001b | ((l) << 12))
+#define	TPM_DATA_FIFO(l)		(0x0024 | ((l) << 12))
+
+#define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
+#define	TPM_RID(l)			(0x0F04 | ((l) << 12))
+
+enum tpm_tis_flags {
+	TPM_TIS_ITPM_POSSIBLE		= BIT(0),
+};
+
 struct tpm_tis_data {
 	u16 manufacturer_id;
 	int locality;
 	int irq;
 	bool irq_tested;
+	unsigned int flags;
 	wait_queue_head_t int_queue;
 	wait_queue_head_t read_queue;
 	const struct tpm_tis_phy_ops *phy_ops;
@@ -85,4 +144,13 @@ static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr,
 	return data->phy_ops->write32(data, addr, value);
 }
 
+void tpm_tis_remove(struct tpm_chip *chip);
+int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
+		      const struct tpm_tis_phy_ops *phy_ops,
+		      acpi_handle acpi_dev_handle);
+
+#ifdef CONFIG_PM_SLEEP
+int tpm_tis_resume(struct device *dev);
+#endif
+
 #endif