Merge branch 'mlxsw-Add-support-for-Q-in-VNI'

Ido Schimmel says:

====================
mlxsw: Add support for Q-in-VNI

This patch set adds support for Q-in-VNI over Spectrum-{2,3} ASICs.
Q-in-VNI is like regular VxLAN encapsulation with the sole difference
that overlay packets can contain a VLAN tag. In Linux, this is achieved
by adding the VxLAN device to a 802.1ad bridge instead of a 802.1q
bridge.

From mlxsw perspective, Q-in-VNI support entails two main changes:

1. An outer VLAN tag should always be pushed to the overlay packet
during decapsulation

2. The EtherType used during decapsulation should be 802.1ad (0x88a8)
instead of the default 802.1q (0x8100)

Patch set overview:

Patches #1-#3 add required device registers and fields

Patch #4 performs small refactoring to allow code re-use

Patches #5-#7 make the EtherType used during decapsulation a property of
the tunnel port (i.e., VxLAN). This leads to the driver vetoing
configurations in which VxLAN devices are member in both 802.1ad and
802.1q/802.1d bridges. Will be handled in the future by determining the
overlay EtherType on the egress port instead

Patch #8 adds support for Q-in-VNI for Spectrum-2 and newer ASICs

Patches #9-#10 veto Q-in-VNI for Spectrum-1 ASICs due to some hardware
limitations. Can be worked around, but decided not to support it for now

Patch #11 adjusts mlxsw to stop vetoing addition of VXLAN devices to
802.1ad bridges

Patch #12 adds a generic forwarding test that can be used with both veth
pairs and physical ports with a loopback

Patch #13 adds a test to make sure mlxsw vetoes unsupported Q-in-VNI
configurations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -581,6 +581,13 @@ mlxsw_reg_sfd_uc_tunnel_pack(char *payload, int rec_index,
 	mlxsw_reg_sfd_uc_tunnel_protocol_set(payload, rec_index, proto);
 }
 
+enum mlxsw_reg_tunnel_port {
+	MLXSW_REG_TUNNEL_PORT_NVE,
+	MLXSW_REG_TUNNEL_PORT_VPLS,
+	MLXSW_REG_TUNNEL_PORT_FLEX_TUNNEL0,
+	MLXSW_REG_TUNNEL_PORT_FLEX_TUNNEL1,
+};
+
 /* SFN - Switch FDB Notification Register
  * -------------------------------------------
  * The switch provides notifications on newly learned FDB entries and
@@ -738,13 +745,6 @@ MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_protocol, MLXSW_REG_SFN_BASE_LEN, 27,
 MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_uip_lsb, MLXSW_REG_SFN_BASE_LEN, 0,
 		     24, MLXSW_REG_SFN_REC_LEN, 0x0C, false);
 
-enum mlxsw_reg_sfn_tunnel_port {
-	MLXSW_REG_SFN_TUNNEL_PORT_NVE,
-	MLXSW_REG_SFN_TUNNEL_PORT_VPLS,
-	MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_sfn_uc_tunnel_port
  * Tunnel port.
  * Reserved on Spectrum.
@@ -821,8 +821,16 @@ static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid,
 
 MLXSW_REG_DEFINE(spvid, MLXSW_REG_SPVID_ID, MLXSW_REG_SPVID_LEN);
 
+/* reg_spvid_tport
+ * Port is tunnel port.
+ * Reserved when SwitchX/-2 or Spectrum-1.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spvid, tport, 0x00, 24, 1);
+
 /* reg_spvid_local_port
- * Local port number.
+ * When tport = 0: Local port number. Not supported for CPU port.
+ * When tport = 1: Tunnel port.
  * Access: Index
  */
 MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
@@ -1693,6 +1701,109 @@ static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
 	mlxsw_reg_svfa_vid_set(payload, vid);
 }
 
+/*  SPVTR - Switch Port VLAN Stacking Register
+ *  ------------------------------------------
+ *  The Switch Port VLAN Stacking register configures the VLAN mode of the port
+ *  to enable VLAN stacking.
+ */
+#define MLXSW_REG_SPVTR_ID 0x201D
+#define MLXSW_REG_SPVTR_LEN 0x10
+
+MLXSW_REG_DEFINE(spvtr, MLXSW_REG_SPVTR_ID, MLXSW_REG_SPVTR_LEN);
+
+/* reg_spvtr_tport
+ * Port is tunnel port.
+ * Access: Index
+ *
+ * Note: Reserved when SwitchX/-2 or Spectrum-1.
+ */
+MLXSW_ITEM32(reg, spvtr, tport, 0x00, 24, 1);
+
+/* reg_spvtr_local_port
+ * When tport = 0: local port number (Not supported from/to CPU).
+ * When tport = 1: tunnel port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spvtr, local_port, 0x00, 16, 8);
+
+/* reg_spvtr_ippe
+ * Ingress Port Prio Mode Update Enable.
+ * When set, the Port Prio Mode is updated with the provided ipprio_mode field.
+ * Reserved on Get operations.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, ippe, 0x04, 31, 1);
+
+/* reg_spvtr_ipve
+ * Ingress Port VID Mode Update Enable.
+ * When set, the Ingress Port VID Mode is updated with the provided ipvid_mode
+ * field.
+ * Reserved on Get operations.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, ipve, 0x04, 30, 1);
+
+/* reg_spvtr_epve
+ * Egress Port VID Mode Update Enable.
+ * When set, the Egress Port VID Mode is updated with the provided epvid_mode
+ * field.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, epve, 0x04, 29, 1);
+
+/* reg_spvtr_ipprio_mode
+ * Ingress Port Priority Mode.
+ * This controls the PCP and DEI of the new outer VLAN
+ * Note: for SwitchX/-2 the DEI is not affected.
+ * 0: use port default PCP and DEI (configured by QPDPC).
+ * 1: use C-VLAN PCP and DEI.
+ * Has no effect when ipvid_mode = 0.
+ * Reserved when tport = 1.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvtr, ipprio_mode, 0x04, 20, 4);
+
+enum mlxsw_reg_spvtr_ipvid_mode {
+	/* IEEE Compliant PVID (default) */
+	MLXSW_REG_SPVTR_IPVID_MODE_IEEE_COMPLIANT_PVID,
+	/* Push VLAN (for VLAN stacking, except prio tagged packets) */
+	MLXSW_REG_SPVTR_IPVID_MODE_PUSH_VLAN_FOR_UNTAGGED_PACKET,
+	/* Always push VLAN (also for prio tagged packets) */
+	MLXSW_REG_SPVTR_IPVID_MODE_ALWAYS_PUSH_VLAN,
+};
+
+/* reg_spvtr_ipvid_mode
+ * Ingress Port VLAN-ID Mode.
+ * For Spectrum family, this affects the values of SPVM.i
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvtr, ipvid_mode, 0x04, 16, 4);
+
+enum mlxsw_reg_spvtr_epvid_mode {
+	/* IEEE Compliant VLAN membership */
+	MLXSW_REG_SPVTR_EPVID_MODE_IEEE_COMPLIANT_VLAN_MEMBERSHIP,
+	/* Pop VLAN (for VLAN stacking) */
+	MLXSW_REG_SPVTR_EPVID_MODE_POP_VLAN,
+};
+
+/* reg_spvtr_epvid_mode
+ * Egress Port VLAN-ID Mode.
+ * For Spectrum family, this affects the values of SPVM.e,u,pt.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, spvtr, epvid_mode, 0x04, 0, 4);
+
+static inline void mlxsw_reg_spvtr_pack(char *payload, bool tport,
+					u8 local_port,
+					enum mlxsw_reg_spvtr_ipvid_mode ipvid_mode)
+{
+	MLXSW_REG_ZERO(spvtr, payload);
+	mlxsw_reg_spvtr_tport_set(payload, tport);
+	mlxsw_reg_spvtr_local_port_set(payload, local_port);
+	mlxsw_reg_spvtr_ipvid_mode_set(payload, ipvid_mode);
+	mlxsw_reg_spvtr_ipve_set(payload, true);
+}
+
 /* SVPE - Switch Virtual-Port Enabling Register
  * --------------------------------------------
  * Enables port virtualization.
@@ -10507,13 +10618,6 @@ enum mlxsw_reg_tnumt_record_type {
  */
 MLXSW_ITEM32(reg, tnumt, record_type, 0x00, 28, 4);
 
-enum mlxsw_reg_tnumt_tunnel_port {
-	MLXSW_REG_TNUMT_TUNNEL_PORT_NVE,
-	MLXSW_REG_TNUMT_TUNNEL_PORT_VPLS,
-	MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_tnumt_tunnel_port
  * Tunnel port.
  * Access: RW
@@ -10561,7 +10665,7 @@ MLXSW_ITEM32_INDEXED(reg, tnumt, udip_ptr, 0x0C, 0, 24, 0x04, 0x00, false);
 
 static inline void mlxsw_reg_tnumt_pack(char *payload,
 					enum mlxsw_reg_tnumt_record_type type,
-					enum mlxsw_reg_tnumt_tunnel_port tport,
+					enum mlxsw_reg_tunnel_port tport,
 					u32 underlay_mc_ptr, bool vnext,
 					u32 next_underlay_mc_ptr,
 					u8 record_size)
@@ -10725,13 +10829,6 @@ static inline void mlxsw_reg_tndem_pack(char *payload, u8 underlay_ecn,
 
 MLXSW_REG_DEFINE(tnpc, MLXSW_REG_TNPC_ID, MLXSW_REG_TNPC_LEN);
 
-enum mlxsw_reg_tnpc_tunnel_port {
-	MLXSW_REG_TNPC_TUNNEL_PORT_NVE,
-	MLXSW_REG_TNPC_TUNNEL_PORT_VPLS,
-	MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_tnpc_tunnel_port
  * Tunnel port.
  * Access: Index
@@ -10751,7 +10848,7 @@ MLXSW_ITEM32(reg, tnpc, learn_enable_v6, 0x04, 1, 1);
 MLXSW_ITEM32(reg, tnpc, learn_enable_v4, 0x04, 0, 1);
 
 static inline void mlxsw_reg_tnpc_pack(char *payload,
-				       enum mlxsw_reg_tnpc_tunnel_port tport,
+				       enum mlxsw_reg_tunnel_port tport,
 				       bool learn_enable)
 {
 	MLXSW_REG_ZERO(tnpc, payload);
@@ -11320,6 +11417,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(slcor),
 	MLXSW_REG(spmlr),
 	MLXSW_REG(svfa),
+	MLXSW_REG(spvtr),
 	MLXSW_REG(svpe),
 	MLXSW_REG(sfmr),
 	MLXSW_REG(spvmlr),

drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -384,7 +384,7 @@ int mlxsw_sp_port_vid_learning_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 	return err;
 }
 
-static int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type)
+int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type)
 {
 	switch (ethtype) {
 	case ETH_P_8021Q:

drivers/net/ethernet/mellanox/mlxsw/spectrum.h

@@ -584,6 +584,7 @@ int mlxsw_sp_port_vid_stp_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 int mlxsw_sp_port_vp_mode_set(struct mlxsw_sp_port *mlxsw_sp_port, bool enable);
 int mlxsw_sp_port_vid_learning_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 				   bool learn_enable);
+int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type);
 int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 			   u16 ethtype);
 struct mlxsw_sp_port_vlan *
@@ -1202,6 +1203,7 @@ struct mlxsw_sp_nve_params {
 	enum mlxsw_sp_nve_type type;
 	__be32 vni;
 	const struct net_device *dev;
+	u16 ethertype;
 };
 
 extern const struct mlxsw_sp_nve_ops *mlxsw_sp1_nve_ops_arr[];

drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c

@@ -368,7 +368,7 @@ mlxsw_sp_nve_mc_record_refresh(struct mlxsw_sp_nve_mc_record *mc_record)
 		next_valid = true;
 	}
 
-	mlxsw_reg_tnumt_pack(tnumt_pl, type, MLXSW_REG_TNUMT_TUNNEL_PORT_NVE,
+	mlxsw_reg_tnumt_pack(tnumt_pl, type, MLXSW_REG_TUNNEL_PORT_NVE,
 			     mc_record->kvdl_index, next_valid,
 			     next_kvdl_index, mc_record->num_entries);
 
@@ -798,11 +798,11 @@ int mlxsw_sp_nve_fid_enable(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fid *fid,
 
 	ops = nve->nve_ops_arr[params->type];
 
-	if (!ops->can_offload(nve, params->dev, extack))
+	if (!ops->can_offload(nve, params, extack))
 		return -EINVAL;
 
 	memset(&config, 0, sizeof(config));
-	ops->nve_config(nve, params->dev, &config);
+	ops->nve_config(nve, params, &config);
 	if (nve->num_nve_tunnels &&
 	    memcmp(&config, &nve->config, sizeof(config))) {
 		NL_SET_ERR_MSG_MOD(extack, "Conflicting NVE tunnels configuration");

drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h

@@ -18,6 +18,7 @@ struct mlxsw_sp_nve_config {
 	u32 ul_tb_id;
 	enum mlxsw_sp_l3proto ul_proto;
 	union mlxsw_sp_l3addr ul_sip;
+	u16 ethertype;
 };
 
 struct mlxsw_sp_nve {
@@ -35,10 +36,10 @@ struct mlxsw_sp_nve {
 struct mlxsw_sp_nve_ops {
 	enum mlxsw_sp_nve_type type;
 	bool (*can_offload)(const struct mlxsw_sp_nve *nve,
-			    const struct net_device *dev,
+			    const struct mlxsw_sp_nve_params *params,
 			    struct netlink_ext_ack *extack);
 	void (*nve_config)(const struct mlxsw_sp_nve *nve,
-			   const struct net_device *dev,
+			   const struct mlxsw_sp_nve_params *params,
 			   struct mlxsw_sp_nve_config *config);
 	int (*init)(struct mlxsw_sp_nve *nve,
 		    const struct mlxsw_sp_nve_config *config);

drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c

@@ -22,10 +22,10 @@
 						 VXLAN_F_LEARN)
 
 static bool mlxsw_sp_nve_vxlan_can_offload(const struct mlxsw_sp_nve *nve,
-					   const struct net_device *dev,
+					   const struct mlxsw_sp_nve_params *params,
 					   struct netlink_ext_ack *extack)
 {
-	struct vxlan_dev *vxlan = netdev_priv(dev);
+	struct vxlan_dev *vxlan = netdev_priv(params->dev);
 	struct vxlan_config *cfg = &vxlan->cfg;
 
 	if (cfg->saddr.sa.sa_family != AF_INET) {
@@ -86,11 +86,23 @@ static bool mlxsw_sp_nve_vxlan_can_offload(const struct mlxsw_sp_nve *nve,
 	return true;
 }
 
+static bool mlxsw_sp1_nve_vxlan_can_offload(const struct mlxsw_sp_nve *nve,
+					    const struct mlxsw_sp_nve_params *params,
+					    struct netlink_ext_ack *extack)
+{
+	if (params->ethertype == ETH_P_8021AD) {
+		NL_SET_ERR_MSG_MOD(extack, "VxLAN: 802.1ad bridge is not supported with VxLAN");
+		return false;
+	}
+
+	return mlxsw_sp_nve_vxlan_can_offload(nve, params, extack);
+}
+
 static void mlxsw_sp_nve_vxlan_config(const struct mlxsw_sp_nve *nve,
-				      const struct net_device *dev,
+				      const struct mlxsw_sp_nve_params *params,
 				      struct mlxsw_sp_nve_config *config)
 {
-	struct vxlan_dev *vxlan = netdev_priv(dev);
+	struct vxlan_dev *vxlan = netdev_priv(params->dev);
 	struct vxlan_config *cfg = &vxlan->cfg;
 
 	config->type = MLXSW_SP_NVE_TYPE_VXLAN;
@@ -101,6 +113,7 @@ static void mlxsw_sp_nve_vxlan_config(const struct mlxsw_sp_nve *nve,
 	config->ul_proto = MLXSW_SP_L3_PROTO_IPV4;
 	config->ul_sip.addr4 = cfg->saddr.sin.sin_addr.s_addr;
 	config->udp_dport = cfg->dst_port;
+	config->ethertype = params->ethertype;
 }
 
 static int __mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp,
@@ -286,7 +299,7 @@ mlxsw_sp_nve_vxlan_clear_offload(const struct net_device *nve_dev, __be32 vni)
 
 const struct mlxsw_sp_nve_ops mlxsw_sp1_nve_vxlan_ops = {
 	.type		= MLXSW_SP_NVE_TYPE_VXLAN,
-	.can_offload	= mlxsw_sp_nve_vxlan_can_offload,
+	.can_offload	= mlxsw_sp1_nve_vxlan_can_offload,
 	.nve_config	= mlxsw_sp_nve_vxlan_config,
 	.init		= mlxsw_sp1_nve_vxlan_init,
 	.fini		= mlxsw_sp1_nve_vxlan_fini,
@@ -299,16 +312,35 @@ static bool mlxsw_sp2_nve_vxlan_learning_set(struct mlxsw_sp *mlxsw_sp,
 {
 	char tnpc_pl[MLXSW_REG_TNPC_LEN];
 
-	mlxsw_reg_tnpc_pack(tnpc_pl, MLXSW_REG_TNPC_TUNNEL_PORT_NVE,
+	mlxsw_reg_tnpc_pack(tnpc_pl, MLXSW_REG_TUNNEL_PORT_NVE,
 			    learning_en);
 	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tnpc), tnpc_pl);
 }
 
+static int
+mlxsw_sp2_nve_decap_ethertype_set(struct mlxsw_sp *mlxsw_sp, u16 ethertype)
+{
+	char spvid_pl[MLXSW_REG_SPVID_LEN] = {};
+	u8 sver_type;
+	int err;
+
+	mlxsw_reg_spvid_tport_set(spvid_pl, true);
+	mlxsw_reg_spvid_local_port_set(spvid_pl,
+				       MLXSW_REG_TUNNEL_PORT_NVE);
+	err = mlxsw_sp_ethtype_to_sver_type(ethertype, &sver_type);
+	if (err)
+		return err;
+
+	mlxsw_reg_spvid_et_vlan_set(spvid_pl, sver_type);
+	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvid), spvid_pl);
+}
+
 static int
 mlxsw_sp2_nve_vxlan_config_set(struct mlxsw_sp *mlxsw_sp,
 			       const struct mlxsw_sp_nve_config *config)
 {
 	char tngcr_pl[MLXSW_REG_TNGCR_LEN];
+	char spvtr_pl[MLXSW_REG_SPVTR_LEN];
 	u16 ul_rif_index;
 	int err;
 
@@ -329,8 +361,25 @@ mlxsw_sp2_nve_vxlan_config_set(struct mlxsw_sp *mlxsw_sp,
 	if (err)
 		goto err_tngcr_write;
 
+	mlxsw_reg_spvtr_pack(spvtr_pl, true, MLXSW_REG_TUNNEL_PORT_NVE,
+			     MLXSW_REG_SPVTR_IPVID_MODE_ALWAYS_PUSH_VLAN);
+	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvtr), spvtr_pl);
+	if (err)
+		goto err_spvtr_write;
+
+	err = mlxsw_sp2_nve_decap_ethertype_set(mlxsw_sp, config->ethertype);
+	if (err)
+		goto err_decap_ethertype_set;
+
 	return 0;
 
+err_decap_ethertype_set:
+	mlxsw_reg_spvtr_pack(spvtr_pl, true, MLXSW_REG_TUNNEL_PORT_NVE,
+			     MLXSW_REG_SPVTR_IPVID_MODE_IEEE_COMPLIANT_PVID);
+	mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvtr), spvtr_pl);
+err_spvtr_write:
+	mlxsw_reg_tngcr_pack(tngcr_pl, MLXSW_REG_TNGCR_TYPE_VXLAN, false, 0);
+	mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tngcr), tngcr_pl);
 err_tngcr_write:
 	mlxsw_sp2_nve_vxlan_learning_set(mlxsw_sp, false);
 err_vxlan_learning_set:
@@ -340,8 +389,14 @@ mlxsw_sp2_nve_vxlan_config_set(struct mlxsw_sp *mlxsw_sp,
 
 static void mlxsw_sp2_nve_vxlan_config_clear(struct mlxsw_sp *mlxsw_sp)
 {
+	char spvtr_pl[MLXSW_REG_SPVTR_LEN];
 	char tngcr_pl[MLXSW_REG_TNGCR_LEN];
 
+	/* Set default EtherType */
+	mlxsw_sp2_nve_decap_ethertype_set(mlxsw_sp, ETH_P_8021Q);
+	mlxsw_reg_spvtr_pack(spvtr_pl, true, MLXSW_REG_TUNNEL_PORT_NVE,
+			     MLXSW_REG_SPVTR_IPVID_MODE_IEEE_COMPLIANT_PVID);
+	mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(spvtr), spvtr_pl);
 	mlxsw_reg_tngcr_pack(tngcr_pl, MLXSW_REG_TNGCR_TYPE_VXLAN, false, 0);
 	mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tngcr), tngcr_pl);
 	mlxsw_sp2_nve_vxlan_learning_set(mlxsw_sp, false);

drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

@@ -2053,9 +2053,10 @@ mlxsw_sp_bridge_8021q_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 }
 
 static int
-mlxsw_sp_bridge_8021q_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
-				 const struct net_device *vxlan_dev, u16 vid,
-				 struct netlink_ext_ack *extack)
+mlxsw_sp_bridge_vlan_aware_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
+				      const struct net_device *vxlan_dev,
+				      u16 vid, u16 ethertype,
+				      struct netlink_ext_ack *extack)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
 	struct vxlan_dev *vxlan = netdev_priv(vxlan_dev);
@@ -2063,6 +2064,7 @@ mlxsw_sp_bridge_8021q_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
 		.type = MLXSW_SP_NVE_TYPE_VXLAN,
 		.vni = vxlan->cfg.vni,
 		.dev = vxlan_dev,
+		.ethertype = ethertype,
 	};
 	struct mlxsw_sp_fid *fid;
 	int err;
@@ -2101,6 +2103,15 @@ mlxsw_sp_bridge_8021q_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
 	return err;
 }
 
+static int
+mlxsw_sp_bridge_8021q_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
+				 const struct net_device *vxlan_dev, u16 vid,
+				 struct netlink_ext_ack *extack)
+{
+	return mlxsw_sp_bridge_vlan_aware_vxlan_join(bridge_device, vxlan_dev,
+						     vid, ETH_P_8021Q, extack);
+}
+
 static struct net_device *
 mlxsw_sp_bridge_8021q_vxlan_dev_find(struct net_device *br_dev, u16 vid)
 {
@@ -2231,6 +2242,7 @@ mlxsw_sp_bridge_8021d_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
 		.type = MLXSW_SP_NVE_TYPE_VXLAN,
 		.vni = vxlan->cfg.vni,
 		.dev = vxlan_dev,
+		.ethertype = ETH_P_8021Q,
 	};
 	struct mlxsw_sp_fid *fid;
 	int err;
@@ -2335,8 +2347,8 @@ mlxsw_sp_bridge_8021ad_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
 				  const struct net_device *vxlan_dev, u16 vid,
 				  struct netlink_ext_ack *extack)
 {
-	NL_SET_ERR_MSG_MOD(extack, "VXLAN is not supported with 802.1ad");
-	return -EOPNOTSUPP;
+	return mlxsw_sp_bridge_vlan_aware_vxlan_join(bridge_device, vxlan_dev,
+						     vid, ETH_P_8021AD, extack);
 }
 
 static const struct mlxsw_sp_bridge_ops mlxsw_sp_bridge_8021ad_ops = {
@@ -3308,8 +3320,8 @@ mlxsw_sp_switchdev_vxlan_vlan_add(struct mlxsw_sp *mlxsw_sp,
 	if (!fid) {
 		if (!flag_untagged || !flag_pvid)
 			return 0;
-		return mlxsw_sp_bridge_8021q_vxlan_join(bridge_device,
-							vxlan_dev, vid, extack);
+		return bridge_device->ops->vxlan_join(bridge_device, vxlan_dev,
+						      vid, extack);
 	}
 
 	/* Second case: FID is associated with the VNI and the VLAN associated
@@ -3348,16 +3360,14 @@ mlxsw_sp_switchdev_vxlan_vlan_add(struct mlxsw_sp *mlxsw_sp,
 	if (!flag_untagged)
 		return 0;
 
-	err = mlxsw_sp_bridge_8021q_vxlan_join(bridge_device, vxlan_dev, vid,
-					       extack);
+	err = bridge_device->ops->vxlan_join(bridge_device, vxlan_dev, vid, extack);
 	if (err)
 		goto err_vxlan_join;
 
 	return 0;
 
 err_vxlan_join:
-	mlxsw_sp_bridge_8021q_vxlan_join(bridge_device, vxlan_dev, old_vid,
-					 NULL);
+	bridge_device->ops->vxlan_join(bridge_device, vxlan_dev, old_vid, NULL);
 	return err;
 }
 

tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+VXPORT=4789
+
+ALL_TESTS="
+	create_dot1d_and_dot1ad_vxlans
+"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+
+setup_prepare()
+{
+	swp1=${NETIFS[p1]}
+	swp2=${NETIFS[p2]}
+
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+}
+
+create_dot1d_and_dot1ad_vxlans()
+{
+	RET=0
+
+	ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0 mcast_snooping 0
+	ip link set dev br0 up
+
+	ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \
+		"$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev vx100 master br0
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link add dev br1 type bridge vlan_filtering 0 mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link add name vx200 type vxlan id 2000 local 192.0.2.17 dstport \
+		"$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx200 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev vx200 master br1 2>/dev/null
+	check_fail $? "802.1d and 802.1ad VxLANs at the same time not rejected"
+
+	ip link set dev vx200 master br1 2>&1 >/dev/null \
+		| grep -q mlxsw_spectrum
+	check_err $? "802.1d and 802.1ad VxLANs at the same time rejected without extack"
+
+	log_test "create 802.1d and 802.1ad VxLANs"
+
+	ip link del dev vx200
+	ip link del dev br1
+	ip link del dev vx100
+	ip link del dev br0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS

tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+VXPORT=4789
+
+ALL_TESTS="
+	create_vxlan_on_top_of_8021ad_bridge
+"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+
+setup_prepare()
+{
+	swp1=${NETIFS[p1]}
+	swp2=${NETIFS[p2]}
+
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+}
+
+create_vxlan_on_top_of_8021ad_bridge()
+{
+	RET=0
+
+	ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0 mcast_snooping 0
+	ip link set dev br0 up
+
+	ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \
+		"$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev vx100 master br0
+
+	bridge vlan add vid 100 dev vx100 pvid untagged 2>/dev/null
+	check_fail $? "802.1ad bridge with VxLAN in Spectrum-1 not rejected"
+
+	bridge vlan add vid 100 dev vx100 pvid untagged 2>&1 >/dev/null \
+		| grep -q mlxsw_spectrum
+	check_err $? "802.1ad bridge with VxLAN in Spectrum-1 rejected without extack"
+
+	log_test "create VxLAN on top of 802.1ad bridge"
+
+	ip link del dev vx100
+	ip link del dev br0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS

tools/testing/selftests/net/forwarding/q_in_vni.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1ad)            + $swp2           | |
+# | |    vid 100 pvid untagged                              vid 100 pvid    | |
+# | |                                                           untagged    | |
+# | |  + vx100 (vxlan)                                                      | |
+# | |    local 192.0.2.17                                                   | |
+# | |    remote 192.0.2.34 192.0.2.50                                       | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | |    vid 100 pvid untagged                                              | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                 BR2 (802.1ad) | |   | |                 BR2 (802.1ad) | |
+# | |  + vx100 (vxlan)              | |   | |  + vx100 (vxlan)              | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |    vid 100 pvid untagged      | |   | |    vid 100 pvid untagged      | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 100 pvid untagged      | |   | |  | vid 100 pvid untagged      | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |  |\                           | |   | |  |\                           | |
+# | |  | + w2.10                    | |   | |  | + w2.10                    | |
+# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.20                      | |   | |  + w2.20                      | |
+# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+	vlan_create $h1 20 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx100 type vxlan id 1000		\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev vx100 master br1
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 100 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 100 dev $swp2 pvid untagged
+
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge vlan del vid 100 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 100 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx100 nomaster
+	ip link set dev vx100 down
+	ip link del dev vx100
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+	bridge vlan add vid 100 dev w1 pvid untagged
+
+	ip link add name vx100 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx100 up
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx100 master br2
+	tc qdisc add dev vx100 clsact
+
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/28
+        vlan_create w2 20 vw2 $host_addr2/24
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 \
+			     192.0.2.3 198.51.100.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 \
+			     192.0.2.4 198.51.100.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2 ": local->local"
+	ping_test $h1 192.0.2.3 ": local->remote 1"
+	ping_test $h1 192.0.2.4 ": local->remote 2"
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS