Commit 41a9aca6 authored by Srikanth Jampala's avatar Srikanth Jampala Committed by Herbert Xu

crypto: cavium/nitrox - Added support for SR-IOV configuration.

Added support to configure SR-IOV using sysfs interface.
Supported VF modes are 16, 32, 64 and 128. Grouped the
hardware configuration functions to "nitrox_hal.h" file.
Changed driver version to "1.1".
Signed-off-by: default avatarSrikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: default avatarGadam Sreerama <sgadam@cavium.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent a7888481
......@@ -7,3 +7,5 @@ n5pf-objs := nitrox_main.o \
nitrox_hal.o \
nitrox_reqmgr.o \
nitrox_algs.o
n5pf-$(CONFIG_PCI_IOV) += nitrox_sriov.o
......@@ -25,19 +25,5 @@ int nitrox_process_se_request(struct nitrox_device *ndev,
struct skcipher_request *skreq);
void backlog_qflush_work(struct work_struct *work);
void nitrox_config_emu_unit(struct nitrox_device *ndev);
void nitrox_config_pkt_input_rings(struct nitrox_device *ndev);
void nitrox_config_pkt_solicit_ports(struct nitrox_device *ndev);
void nitrox_config_vfmode(struct nitrox_device *ndev, int mode);
void nitrox_config_nps_unit(struct nitrox_device *ndev);
void nitrox_config_pom_unit(struct nitrox_device *ndev);
void nitrox_config_rand_unit(struct nitrox_device *ndev);
void nitrox_config_efl_unit(struct nitrox_device *ndev);
void nitrox_config_bmi_unit(struct nitrox_device *ndev);
void nitrox_config_bmo_unit(struct nitrox_device *ndev);
void nitrox_config_lbc_unit(struct nitrox_device *ndev);
void invalidate_lbc(struct nitrox_device *ndev);
void enable_pkt_input_ring(struct nitrox_device *ndev, int ring);
void enable_pkt_solicit_port(struct nitrox_device *ndev, int port);
#endif /* __NITROX_COMMON_H */
......@@ -88,9 +88,25 @@ struct nitrox_bh {
struct bh_data *slc;
};
/* NITROX-V driver state */
#define NITROX_UCODE_LOADED 0
#define NITROX_READY 1
/*
* NITROX Device states
*/
enum ndev_state {
__NDEV_NOT_READY,
__NDEV_READY,
__NDEV_IN_RESET,
};
/* NITROX support modes for VF(s) */
enum vf_mode {
__NDEV_MODE_PF,
__NDEV_MODE_VF16,
__NDEV_MODE_VF32,
__NDEV_MODE_VF64,
__NDEV_MODE_VF128,
};
#define __NDEV_SRIOV_BIT 0
/* command queue size */
#define DEFAULT_CMD_QLEN 2048
......@@ -98,7 +114,6 @@ struct nitrox_bh {
#define CMD_TIMEOUT 2000
#define DEV(ndev) ((struct device *)(&(ndev)->pdev->dev))
#define PF_MODE 0
#define NITROX_CSR_ADDR(ndev, offset) \
((ndev)->bar_addr + (offset))
......@@ -108,13 +123,15 @@ struct nitrox_bh {
* @list: pointer to linked list of devices
* @bar_addr: iomap address
* @pdev: PCI device information
* @status: NITROX status
* @state: NITROX device state
* @flags: flags to indicate device the features
* @timeout: Request timeout in jiffies
* @refcnt: Device usage count
* @idx: device index (0..N)
* @node: NUMA node id attached
* @qlen: Command queue length
* @nr_queues: Number of command queues
* @mode: Device mode PF/VF
* @ctx_pool: DMA pool for crypto context
* @pkt_cmdqs: SE Command queues
* @msix: MSI-X information
......@@ -128,7 +145,8 @@ struct nitrox_device {
u8 __iomem *bar_addr;
struct pci_dev *pdev;
unsigned long status;
atomic_t state;
unsigned long flags;
unsigned long timeout;
refcount_t refcnt;
......@@ -136,6 +154,8 @@ struct nitrox_device {
int node;
u16 qlen;
u16 nr_queues;
int num_vfs;
enum vf_mode mode;
struct dma_pool *ctx_pool;
struct nitrox_cmdq *pkt_cmdqs;
......@@ -173,9 +193,9 @@ static inline void nitrox_write_csr(struct nitrox_device *ndev, u64 offset,
writeq(value, (ndev->bar_addr + offset));
}
static inline int nitrox_ready(struct nitrox_device *ndev)
static inline bool nitrox_ready(struct nitrox_device *ndev)
{
return test_bit(NITROX_READY, &ndev->status);
return atomic_read(&ndev->state) == __NDEV_READY;
}
#endif /* __NITROX_DEV_H */
......@@ -256,7 +256,7 @@ void nitrox_config_nps_unit(struct nitrox_device *ndev)
/* disable ILK interface */
core_gbl_vfcfg.value = 0;
core_gbl_vfcfg.s.ilk_disable = 1;
core_gbl_vfcfg.s.cfg = PF_MODE;
core_gbl_vfcfg.s.cfg = __NDEV_MODE_PF;
nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, core_gbl_vfcfg.value);
/* config input and solicit ports */
nitrox_config_pkt_input_rings(ndev);
......@@ -400,3 +400,13 @@ void nitrox_config_lbc_unit(struct nitrox_device *ndev)
offset = LBC_ELM_VF65_128_INT_ENA_W1S;
nitrox_write_csr(ndev, offset, (~0ULL));
}
void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode)
{
union nps_core_gbl_vfcfg vfcfg;
vfcfg.value = nitrox_read_csr(ndev, NPS_CORE_GBL_VFCFG);
vfcfg.s.cfg = mode & 0x7;
nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, vfcfg.value);
}
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __NITROX_HAL_H
#define __NITROX_HAL_H
#include "nitrox_dev.h"
void nitrox_config_emu_unit(struct nitrox_device *ndev);
void nitrox_config_pkt_input_rings(struct nitrox_device *ndev);
void nitrox_config_pkt_solicit_ports(struct nitrox_device *ndev);
void nitrox_config_nps_unit(struct nitrox_device *ndev);
void nitrox_config_pom_unit(struct nitrox_device *ndev);
void nitrox_config_rand_unit(struct nitrox_device *ndev);
void nitrox_config_efl_unit(struct nitrox_device *ndev);
void nitrox_config_bmi_unit(struct nitrox_device *ndev);
void nitrox_config_bmo_unit(struct nitrox_device *ndev);
void nitrox_config_lbc_unit(struct nitrox_device *ndev);
void invalidate_lbc(struct nitrox_device *ndev);
void enable_pkt_input_ring(struct nitrox_device *ndev, int ring);
void enable_pkt_solicit_port(struct nitrox_device *ndev, int port);
void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode);
#endif /* __NITROX_HAL_H */
......@@ -6,6 +6,7 @@
#include "nitrox_dev.h"
#include "nitrox_csr.h"
#include "nitrox_common.h"
#include "nitrox_hal.h"
#define NR_RING_VECTORS 3
#define NPS_CORE_INT_ACTIVE_ENTRY 192
......
......@@ -11,13 +11,14 @@
#include "nitrox_dev.h"
#include "nitrox_common.h"
#include "nitrox_csr.h"
#include "nitrox_hal.h"
#define CNN55XX_DEV_ID 0x12
#define MAX_PF_QUEUES 64
#define UCODE_HLEN 48
#define SE_GROUP 0
#define DRIVER_VERSION "1.0"
#define DRIVER_VERSION "1.1"
#define FW_DIR "cavium/"
/* SE microcode */
#define SE_FW FW_DIR "cnn55xx_se.fw"
......@@ -42,6 +43,15 @@ static unsigned int qlen = DEFAULT_CMD_QLEN;
module_param(qlen, uint, 0644);
MODULE_PARM_DESC(qlen, "Command queue length - default 2048");
#ifdef CONFIG_PCI_IOV
int nitrox_sriov_configure(struct pci_dev *pdev, int num_vfs);
#else
int nitrox_sriov_configure(struct pci_dev *pdev, int num_vfs)
{
return 0;
}
#endif
/**
* struct ucode - Firmware Header
* @id: microcode ID
......@@ -136,9 +146,6 @@ static int nitrox_load_fw(struct nitrox_device *ndev, const char *fw_name)
write_to_ucd_unit(ndev, ucode);
release_firmware(fw);
set_bit(NITROX_UCODE_LOADED, &ndev->status);
/* barrier to sync with other cpus */
smp_mb__after_atomic();
return 0;
}
......@@ -555,7 +562,7 @@ static int nitrox_probe(struct pci_dev *pdev,
if (err)
goto pf_hw_fail;
set_bit(NITROX_READY, &ndev->status);
atomic_set(&ndev->state, __NDEV_READY);
/* barrier to sync with other cpus */
smp_mb__after_atomic();
......@@ -567,7 +574,7 @@ static int nitrox_probe(struct pci_dev *pdev,
crypto_fail:
nitrox_debugfs_exit(ndev);
clear_bit(NITROX_READY, &ndev->status);
atomic_set(&ndev->state, __NDEV_NOT_READY);
/* barrier to sync with other cpus */
smp_mb__after_atomic();
pf_hw_fail:
......@@ -602,11 +609,16 @@ static void nitrox_remove(struct pci_dev *pdev)
dev_info(DEV(ndev), "Removing Device %x:%x\n",
ndev->hw.vendor_id, ndev->hw.device_id);
clear_bit(NITROX_READY, &ndev->status);
atomic_set(&ndev->state, __NDEV_NOT_READY);
/* barrier to sync with other cpus */
smp_mb__after_atomic();
nitrox_remove_from_devlist(ndev);
#ifdef CONFIG_PCI_IOV
/* disable SR-IOV */
nitrox_sriov_configure(pdev, 0);
#endif
nitrox_crypto_unregister();
nitrox_debugfs_exit(ndev);
nitrox_pf_sw_cleanup(ndev);
......@@ -632,6 +644,9 @@ static struct pci_driver nitrox_driver = {
.probe = nitrox_probe,
.remove = nitrox_remove,
.shutdown = nitrox_shutdown,
#ifdef CONFIG_PCI_IOV
.sriov_configure = nitrox_sriov_configure,
#endif
};
module_pci_driver(nitrox_driver);
......
// SPDX-License-Identifier: GPL-2.0
#include <linux/pci.h>
#include <linux/delay.h>
#include "nitrox_dev.h"
#include "nitrox_hal.h"
#include "nitrox_common.h"
static inline bool num_vfs_valid(int num_vfs)
{
bool valid = false;
switch (num_vfs) {
case 16:
case 32:
case 64:
case 128:
valid = true;
break;
}
return valid;
}
static inline enum vf_mode num_vfs_to_mode(int num_vfs)
{
enum vf_mode mode = 0;
switch (num_vfs) {
case 0:
mode = __NDEV_MODE_PF;
break;
case 16:
mode = __NDEV_MODE_VF16;
break;
case 32:
mode = __NDEV_MODE_VF32;
break;
case 64:
mode = __NDEV_MODE_VF64;
break;
case 128:
mode = __NDEV_MODE_VF128;
break;
}
return mode;
}
static void pf_sriov_cleanup(struct nitrox_device *ndev)
{
/* PF has no queues in SR-IOV mode */
atomic_set(&ndev->state, __NDEV_NOT_READY);
/* unregister crypto algorithms */
nitrox_crypto_unregister();
/* cleanup PF resources */
nitrox_pf_cleanup_isr(ndev);
nitrox_common_sw_cleanup(ndev);
}
static int pf_sriov_init(struct nitrox_device *ndev)
{
int err;
/* allocate resources for PF */
err = nitrox_common_sw_init(ndev);
if (err)
return err;
err = nitrox_pf_init_isr(ndev);
if (err) {
nitrox_common_sw_cleanup(ndev);
return err;
}
/* configure the packet queues */
nitrox_config_pkt_input_rings(ndev);
nitrox_config_pkt_solicit_ports(ndev);
/* set device to ready state */
atomic_set(&ndev->state, __NDEV_READY);
/* register crypto algorithms */
return nitrox_crypto_register();
}
static int nitrox_sriov_enable(struct pci_dev *pdev, int num_vfs)
{
struct nitrox_device *ndev = pci_get_drvdata(pdev);
int err;
if (!num_vfs_valid(num_vfs)) {
dev_err(DEV(ndev), "Invalid num_vfs %d\n", num_vfs);
return -EINVAL;
}
if (pci_num_vf(pdev) == num_vfs)
return num_vfs;
err = pci_enable_sriov(pdev, num_vfs);
if (err) {
dev_err(DEV(ndev), "failed to enable PCI sriov %d\n", err);
return err;
}
dev_info(DEV(ndev), "Enabled VF(s) %d\n", num_vfs);
ndev->num_vfs = num_vfs;
ndev->mode = num_vfs_to_mode(num_vfs);
/* set bit in flags */
set_bit(__NDEV_SRIOV_BIT, &ndev->flags);
/* cleanup PF resources */
pf_sriov_cleanup(ndev);
config_nps_core_vfcfg_mode(ndev, ndev->mode);
return num_vfs;
}
static int nitrox_sriov_disable(struct pci_dev *pdev)
{
struct nitrox_device *ndev = pci_get_drvdata(pdev);
if (!test_bit(__NDEV_SRIOV_BIT, &ndev->flags))
return 0;
if (pci_vfs_assigned(pdev)) {
dev_warn(DEV(ndev), "VFs are attached to VM. Can't disable SR-IOV\n");
return -EPERM;
}
pci_disable_sriov(pdev);
/* clear bit in flags */
clear_bit(__NDEV_SRIOV_BIT, &ndev->flags);
ndev->num_vfs = 0;
ndev->mode = __NDEV_MODE_PF;
config_nps_core_vfcfg_mode(ndev, ndev->mode);
return pf_sriov_init(ndev);
}
int nitrox_sriov_configure(struct pci_dev *pdev, int num_vfs)
{
if (!num_vfs)
return nitrox_sriov_disable(pdev);
return nitrox_sriov_enable(pdev, num_vfs);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment