arm64: dts: zynqmp: Wire arasan nand controller

Add missing arasan controller with clocks. Disable it by default. Every
board can enable it with specifying others properties.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/05cc1ce7973ac5200aeca428c137b422c827c5e8.1611224800.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi

@@ -116,6 +116,10 @@ &lpd_dma_chan8 {
 	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
 };
 
+&nand0 {
+	clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
 &gem0 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
 		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -462,6 +462,18 @@ mc: memory-controller@fd070000 {
 			interrupts = <0 112 4>;
 		};
 
+		nand0: nand-controller@ff100000 {
+			compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+			status = "disabled";
+			reg = <0x0 0xff100000 0x0 0x1000>;
+			clock-names = "controller", "bus";
+			interrupt-parent = <&gic>;
+			interrupts = <0 14 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_NAND>;
+		};
+
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,zynqmp-gem", "cdns,gem";
 			status = "disabled";