Commit 41b4d581 authored by Johan Hovold's avatar Johan Hovold Committed by Greg Kroah-Hartman

tty: ircomm: remove dead and broken ioctl code

Remove three ifdefed and broken implementations of TIOCSSERIAL and
TIOCGICOUNT, and parity handling in set_termios which had suffered
severe bit rot.
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 48a7bd11
......@@ -97,33 +97,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
}
tty_port_set_check_carrier(&self->port, ~cflag & CLOCAL);
#if 0
/*
* Set up parity check flag
*/
if (I_INPCK(self->tty))
driver->read_status_mask |= LSR_FE | LSR_PE;
if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty))
driver->read_status_mask |= LSR_BI;
/*
* Characters to ignore
*/
driver->ignore_status_mask = 0;
if (I_IGNPAR(driver->tty))
driver->ignore_status_mask |= LSR_PE | LSR_FE;
if (I_IGNBRK(self->tty)) {
self->ignore_status_mask |= LSR_BI;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(self->tty))
self->ignore_status_mask |= LSR_OE;
}
#endif
self->settings.data_format = cval;
ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
......@@ -271,67 +245,6 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self,
struct serial_struct __user *new_info)
{
#if 0
struct serial_struct new_serial;
struct ircomm_tty_cb old_state, *state;
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
state = self
old_state = *self;
if (!capable(CAP_SYS_ADMIN)) {
if ((new_serial.baud_base != state->settings.data_rate) ||
(new_serial.close_delay != state->close_delay) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(self->flags & ~ASYNC_USR_MASK)))
return -EPERM;
state->flags = ((state->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
self->flags = ((self->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
/* self->custom_divisor = new_serial.custom_divisor; */
goto check_and_exit;
}
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
if (self->settings.data_rate != new_serial.baud_base) {
self->settings.data_rate = new_serial.baud_base;
ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE);
}
self->close_delay = new_serial.close_delay * HZ/100;
self->closing_wait = new_serial.closing_wait * HZ/100;
/* self->custom_divisor = new_serial.custom_divisor; */
self->flags = ((self->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
if (tty_port_initialized(self)) {
if (((old_state.flags & ASYNC_SPD_MASK) !=
(self->flags & ASYNC_SPD_MASK)) ||
(old_driver.custom_divisor != driver->custom_divisor)) {
if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
driver->tty->alt_speed = 57600;
if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
driver->tty->alt_speed = 115200;
if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
driver->tty->alt_speed = 230400;
if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
driver->tty->alt_speed = 460800;
ircomm_tty_change_speed(driver);
}
}
#endif
return 0;
}
......@@ -367,24 +280,6 @@ int ircomm_tty_ioctl(struct tty_struct *tty,
case TIOCGICOUNT:
pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__);
#if 0
save_flags(flags); cli();
cnow = driver->icount;
restore_flags(flags);
p_cuser = (struct serial_icounter_struct __user *) arg;
if (put_user(cnow.cts, &p_cuser->cts) ||
put_user(cnow.dsr, &p_cuser->dsr) ||
put_user(cnow.rng, &p_cuser->rng) ||
put_user(cnow.dcd, &p_cuser->dcd) ||
put_user(cnow.rx, &p_cuser->rx) ||
put_user(cnow.tx, &p_cuser->tx) ||
put_user(cnow.frame, &p_cuser->frame) ||
put_user(cnow.overrun, &p_cuser->overrun) ||
put_user(cnow.parity, &p_cuser->parity) ||
put_user(cnow.brk, &p_cuser->brk) ||
put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
return -EFAULT;
#endif
return 0;
default:
ret = -ENOIOCTLCMD; /* ioctls which we must ignore */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment