V4L/DVB (3396): Add DVB-T support for the LifeView DVB Trio PCI card

This patch adds DVB-T support, no DVB-S yet
Signed-off-by: Nico Sabbi <nsabbi@tiscali.it>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/saa7134/saa7134-cards.c

@@ -2624,6 +2624,7 @@ struct saa7134_board saa7134_boards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
 		.gpiomask	= 0x00200000,
+		.mpeg           = SAA7134_MPEG_DVB,	/* FIXME: DVB not implemented yet */
 		.inputs         = {{
 			.name = name_tv,	/* Analog broadcast/cable TV */
 			.vmux = 1,
@@ -3547,6 +3548,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		i2c_transfer(&dev->i2c_adap, &msg, 1);
 		}
 		break;
+	case SAA7134_BOARD_FLYDVB_TRIO:
 	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
 		/* make the tda10046 find its eeprom */
 		{

drivers/media/video/saa7134/saa7134-dvb.c

@@ -852,6 +852,39 @@ static struct tda1004x_config philips_tiger_config = {
 
 /* ------------------------------------------------------------------ */
 
+static int lifeview_trio_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	int ret;
+
+	ret = philips_tda827xa_pll_set(0x60, fe, params);
+	return ret;
+}
+
+static int lifeview_trio_dvb_mode(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static void lifeview_trio_analog_mode(struct dvb_frontend *fe)
+{
+	philips_tda827xa_pll_sleep(0x60, fe);
+}
+
+static struct tda1004x_config lifeview_trio_config = {
+	.demod_address = 0x09,
+	.invert        = 1,
+	.invert_oclk   = 0,
+	.xtal_freq     = TDA10046_XTAL_16M,
+	.agc_config    = TDA10046_AGC_TDA827X_GPL,
+	.if_freq       = TDA10046_FREQ_045,
+	.pll_init      = lifeview_trio_dvb_mode,
+	.pll_set       = lifeview_trio_pll_set,
+	.pll_sleep     = lifeview_trio_analog_mode,
+	.request_firmware = NULL,
+};
+
+/* ------------------------------------------------------------------ */
+
 static int ads_duo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
 	int ret;
@@ -1019,6 +1052,10 @@ static int dvb_init(struct saa7134_dev *dev)
 		dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
 						    &dev->i2c_adap);
 		break;
+	case SAA7134_BOARD_FLYDVB_TRIO:
+		dev->dvb.frontend = tda10046_attach(&lifeview_trio_config,
+						    &dev->i2c_adap);
+		break;
 	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
 		dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config,
 						    &dev->i2c_adap);