Merge remote-tracking branches 'spi/fix/pax2xx' and 'spi/fix/rockchip' into spi-linus

drivers/spi/spi-pxa2xx.c

@@ -585,7 +585,14 @@ static void reset_sccr1(struct driver_data *drv_data)
 	u32 sccr1_reg;
 
 	sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1;
+	switch (drv_data->ssp_type) {
+	case QUARK_X1000_SSP:
+		sccr1_reg &= ~QUARK_X1000_SSCR1_RFT;
+		break;
+	default:
 		sccr1_reg &= ~SSCR1_RFT;
+		break;
+	}
 	sccr1_reg |= chip->threshold;
 	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
 }

drivers/spi/spi-rockchip.c

@@ -142,6 +142,12 @@
 /* sclk_out: spi master internal logic in rk3x can support 50Mhz */
 #define MAX_SCLK_OUT		50000000
 
+/*
+ * SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However,
+ * the controller seems to hang when given 0x10000, so stick with this for now.
+ */
+#define ROCKCHIP_SPI_MAX_TRANLEN		0xffff
+
 enum rockchip_ssi_type {
 	SSI_MOTO_SPI = 0,
 	SSI_TI_SSP,
@@ -573,6 +579,11 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
 	dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
 }
 
+static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
+{
+	return ROCKCHIP_SPI_MAX_TRANLEN;
+}
+
 static int rockchip_spi_transfer_one(
 		struct spi_master *master,
 		struct spi_device *spi,
@@ -589,6 +600,11 @@ static int rockchip_spi_transfer_one(
 		return -EINVAL;
 	}
 
+	if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) {
+		dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len);
+		return -EINVAL;
+	}
+
 	rs->speed = xfer->speed_hz;
 	rs->bpw = xfer->bits_per_word;
 	rs->n_bytes = rs->bpw >> 3;
@@ -730,6 +746,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	master->prepare_message = rockchip_spi_prepare_message;
 	master->unprepare_message = rockchip_spi_unprepare_message;
 	master->transfer_one = rockchip_spi_transfer_one;
+	master->max_transfer_size = rockchip_spi_max_transfer_size;
 	master->handle_err = rockchip_spi_handle_err;
 
 	rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");