MXC: iomux-v3: correct NO_PAD_CTRL definition

iomux-v3.c uses NO_PAD_CTRL as a 32 bit value
so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41)

Previously, anything requesting NO_PAD_CTRL would get
their pad control register set to 0.

Since it is a pad control mask, place it with the other mask values.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t;
 #define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
 #define MUX_PAD_CTRL_SHIFT	41
 #define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define NO_PAD_CTRL		((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
 #define MUX_SEL_INPUT_SHIFT	58
 #define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
 
@@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t;
  * Use to set PAD control
  */
 
+#define NO_PAD_CTRL			(1 << 16)
 #define PAD_CTL_DVS			(1 << 13)
 #define PAD_CTL_HYS			(1 << 8)