Commit 429b9db8 authored by Yongqiang Sun's avatar Yongqiang Sun Committed by Alex Deucher

drm/amd/display: Remove nv12 work around

[Why]
dal side nv12 wa has a lot of side effects.
KMD side wa is used, so this should be remove.

[How]
Removed wa from dal side.
Signed-off-by: default avatarYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 4d693953
......@@ -47,9 +47,6 @@ int dc_setup_system_context(struct dc *dc, struct dc_phy_addr_space_config *pa_c
*/
memcpy(&dc->vm_pa_config, pa_config, sizeof(struct dc_phy_addr_space_config));
dc->vm_pa_config.valid = true;
if (pa_config->is_hvm_enabled == 0)
dc->debug.nv12_iflip_vm_wa = false;
}
return num_vmids;
......
......@@ -471,7 +471,6 @@ struct dc_debug_options {
bool cm_in_bypass;
int force_clock_mode;/*every mode change.*/
bool nv12_iflip_vm_wa;
bool disable_dram_clock_change_vactive_support;
bool validate_dml_output;
bool enable_dmcub_surface_flip;
......
......@@ -1435,9 +1435,6 @@ static void dcn20_update_dchubp_dpp(
hubp->power_gated = false;
}
if (hubp->funcs->apply_PLAT_54186_wa && viewport_changed)
hubp->funcs->apply_PLAT_54186_wa(hubp, &plane_state->address);
if (pipe_ctx->update_flags.bits.enable || plane_state->update_flags.bits.addr_update)
hws->funcs.update_plane_addr(dc, pipe_ctx);
......
......@@ -225,116 +225,6 @@ void hubp21_set_viewport(
SEC_VIEWPORT_Y_START_C, viewport_c->y);
}
static void hubp21_apply_PLAT_54186_wa(
struct hubp *hubp,
const struct dc_plane_address *address)
{
struct dcn21_hubp *hubp21 = TO_DCN21_HUBP(hubp);
struct dc_debug_options *debug = &hubp->ctx->dc->debug;
unsigned int chroma_bpe = 2;
unsigned int luma_addr_high_part = 0;
unsigned int row_height = 0;
unsigned int chroma_pitch = 0;
unsigned int viewport_c_height = 0;
unsigned int viewport_c_width = 0;
unsigned int patched_viewport_height = 0;
unsigned int patched_viewport_width = 0;
unsigned int rotation_angle = 0;
unsigned int pix_format = 0;
unsigned int h_mirror_en = 0;
unsigned int tile_blk_size = 64 * 1024; /* 64KB for 64KB SW, 4KB for 4KB SW */
if (!debug->nv12_iflip_vm_wa)
return;
REG_GET(DCHUBP_REQ_SIZE_CONFIG_C,
PTE_ROW_HEIGHT_LINEAR_C, &row_height);
REG_GET_2(DCSURF_PRI_VIEWPORT_DIMENSION_C,
PRI_VIEWPORT_WIDTH_C, &viewport_c_width,
PRI_VIEWPORT_HEIGHT_C, &viewport_c_height);
REG_GET(DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C,
PRIMARY_SURFACE_ADDRESS_HIGH_C, &luma_addr_high_part);
REG_GET(DCSURF_SURFACE_PITCH_C,
PITCH_C, &chroma_pitch);
chroma_pitch += 1;
REG_GET_3(DCSURF_SURFACE_CONFIG,
SURFACE_PIXEL_FORMAT, &pix_format,
ROTATION_ANGLE, &rotation_angle,
H_MIRROR_EN, &h_mirror_en);
/* reset persistent cached data */
hubp21->PLAT_54186_wa_chroma_addr_offset = 0;
/* apply wa only for NV12 surface with scatter gather enabled with viewport > 512 along
* the vertical direction*/
if (address->type != PLN_ADDR_TYPE_VIDEO_PROGRESSIVE ||
address->video_progressive.luma_addr.high_part == 0xf4)
return;
if ((rotation_angle == ROTATION_ANGLE_0 || rotation_angle == ROTATION_ANGLE_180)
&& viewport_c_height <= 512)
return;
if ((rotation_angle == ROTATION_ANGLE_90 || rotation_angle == ROTATION_ANGLE_270)
&& viewport_c_width <= 512)
return;
switch (rotation_angle) {
case ROTATION_ANGLE_0: /* 0 degree rotation */
row_height = 128;
patched_viewport_height = (viewport_c_height / row_height + 1) * row_height + 1;
patched_viewport_width = viewport_c_width;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0;
break;
case ROTATION_ANGLE_180: /* 180 degree rotation */
row_height = 128;
patched_viewport_height = viewport_c_height + row_height;
patched_viewport_width = viewport_c_width;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0 - chroma_pitch * row_height * chroma_bpe;
break;
case ROTATION_ANGLE_90: /* 90 degree rotation */
row_height = 256;
if (h_mirror_en) {
patched_viewport_height = viewport_c_height;
patched_viewport_width = viewport_c_width + row_height;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0;
} else {
patched_viewport_height = viewport_c_height;
patched_viewport_width = viewport_c_width + row_height;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0 - tile_blk_size;
}
break;
case ROTATION_ANGLE_270: /* 270 degree rotation */
row_height = 256;
if (h_mirror_en) {
patched_viewport_height = viewport_c_height;
patched_viewport_width = viewport_c_width + row_height;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0 - tile_blk_size;
} else {
patched_viewport_height = viewport_c_height;
patched_viewport_width = viewport_c_width + row_height;
hubp21->PLAT_54186_wa_chroma_addr_offset = 0;
}
break;
default:
ASSERT(0);
break;
}
/* catch cases where viewport keep growing */
ASSERT(patched_viewport_height && patched_viewport_height < 5000);
ASSERT(patched_viewport_width && patched_viewport_width < 5000);
REG_UPDATE_2(DCSURF_PRI_VIEWPORT_DIMENSION_C,
PRI_VIEWPORT_WIDTH_C, patched_viewport_width,
PRI_VIEWPORT_HEIGHT_C, patched_viewport_height);
}
void hubp21_set_vm_system_aperture_settings(struct hubp *hubp,
struct vm_system_aperture_param *apt)
{
......@@ -812,8 +702,6 @@ bool hubp21_program_surface_flip_and_addr(
const struct dc_plane_address *address,
bool flip_immediate)
{
struct dc_debug_options *debug = &hubp->ctx->dc->debug;
struct dcn21_hubp *hubp21 = TO_DCN21_HUBP(hubp);
struct surface_flip_registers flip_regs = { 0 };
flip_regs.vmid = address->vmid;
......@@ -859,10 +747,6 @@ bool hubp21_program_surface_flip_and_addr(
flip_regs.DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH =
address->video_progressive.luma_addr.high_part;
if (debug->nv12_iflip_vm_wa) {
flip_regs.DCSURF_PRIMARY_SURFACE_ADDRESS_C =
address->video_progressive.chroma_addr.low_part + hubp21->PLAT_54186_wa_chroma_addr_offset;
} else
flip_regs.DCSURF_PRIMARY_SURFACE_ADDRESS_C =
address->video_progressive.chroma_addr.low_part;
......@@ -942,7 +826,6 @@ static struct hubp_funcs dcn21_hubp_funcs = {
.set_blank = hubp1_set_blank,
.dcc_control = hubp1_dcc_control,
.mem_program_viewport = hubp21_set_viewport,
.apply_PLAT_54186_wa = hubp21_apply_PLAT_54186_wa,
.set_cursor_attributes = hubp2_cursor_set_attributes,
.set_cursor_position = hubp1_cursor_set_position,
.hubp_clk_cntl = hubp1_clk_cntl,
......
......@@ -878,7 +878,6 @@ static const struct dc_debug_options debug_defaults_drv = {
.scl_reset_length10 = true,
.sanity_checks = true,
.disable_48mhz_pwrdwn = false,
.nv12_iflip_vm_wa = true,
.usbc_combo_phy_reset_wa = true
};
......
......@@ -104,9 +104,6 @@ struct hubp_funcs {
const struct rect *viewport,
const struct rect *viewport_c);
void (*apply_PLAT_54186_wa)(struct hubp *hubp,
const struct dc_plane_address *address);
bool (*hubp_program_surface_flip_and_addr)(
struct hubp *hubp,
const struct dc_plane_address *address,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment