Skip to content

L
linux
Commit 42c1faa2 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://bk.arm.linux.org.uk/linux-2.6-exp 

into home.osdl.org:/home/torvalds/v2.5/linux
parents 0b170e19 f23e0372
Show whitespace changes
Inline Side-by-side
Showing with 1453 additions and 176 deletions
arch/arm/boot/compressed/Makefile
View file @ 42c1faa2
......@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_INTEGRATOR),y)
OBJS += head-integrator.o
endif
ifeq ($(CONFIG_ARCH_CAMELOT),y)
OBJS += head-epxa10db.o
endif
......
arch/arm/boot/compressed/head-integrator.S deleted 100644 → 0
View file @ 0b170e19
#include <asm/mach-types.h>
.section ".start", "ax"
mov r7, #MACH_TYPE_INTEGRATOR
arch/arm/boot/compressed/head.S
View file @ 42c1faa2
......@@ -503,12 +503,6 @@ proc_types:
@ Everything from here on will be the new ID system.
.word 0x41129200 @ ARM920T
.word 0xff00fff0
b __armv4_cache_on
b __armv4_cache_off
b __armv4_cache_flush
.word 0x4401a100 @ sa110 / sa1100
.word 0xffffffe0
b __armv4_cache_on
......@@ -523,6 +517,12 @@ proc_types:
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
.word 0x000f0000
b __armv4_cache_on
b __armv4_cache_off
b __armv4_cache_flush
.word 0x00050000 @ ARMv5TE
.word 0x000f0000
b __armv4_cache_on
......
arch/arm/common/sa1111.c
View file @ 42c1faa2
......@@ -34,6 +34,8 @@
#include <asm/hardware/sa1111.h>
extern void __init sa1110_mb_enable(void);
/*
* We keep the following data for the overall SA1111. Note that the
* struct device and struct resource are "fake"; they should be supplied
......@@ -561,6 +563,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
dev->res.name = dev->dev.bus_id;
dev->res.flags = IORESOURCE_MEM;
dev->mapbase = sachip->base + info->offset;
dev->skpcr_mask = info->skpcr_mask;
memmove(dev->irq, info->irq, sizeof(dev->irq));
ret = request_resource(parent, &dev->res);
if (ret) {
......
arch/arm/configs/netwinder_defconfig 0 → 100644
View file @ 42c1faa2
#
# Automatically generated make config: don't edit
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# System Type
#
# CONFIG_ARCH_ADIFCC is not set
# CONFIG_ARCH_ANAKIN is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
CONFIG_ARCH_FOOTBRIDGE=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
#
# CLPS711X/EP721X Implementations
#
#
# Epxa10db
#
#
# Footbridge Implementations
#
# CONFIG_ARCH_CATS is not set
# CONFIG_ARCH_PERSONAL_SERVER is not set
# CONFIG_ARCH_EBSA285_ADDIN is not set
# CONFIG_ARCH_EBSA285_HOST is not set
CONFIG_ARCH_NETWINDER=y
#
# IOP3xx Implementation Options
#
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_IOP321 is not set
#
# IOP3xx Chipset Features
#
#
# Intel PXA250/210 Implementations
#
#
# SA11x0 Implementations
#
CONFIG_FOOTBRIDGE=y
CONFIG_FOOTBRIDGE_HOST=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_SA110=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WB=y
#
# Processor Features
#
#
# General setup
#
CONFIG_PCI=y
CONFIG_ISA=y
CONFIG_ISA_DMA=y
# CONFIG_ZBOOT_ROM is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set
#
# At least one math emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
#
# Generic Driver Options
#
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=0x301"
CONFIG_LEDS=y
# CONFIG_LEDS_TIMER is not set
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
# CONFIG_HOSTAP is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_TSLIBDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_DZ is not set
# CONFIG_SERIAL_21285 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# L3 serial bus support
#
# CONFIG_L3 is not set
#
# Mice
#
CONFIG_BUSMOUSE=y
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_21285_WATCHDOG is not set
CONFIG_977_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_DS1620=y
CONFIG_NWBUTTON=y
CONFIG_NWBUTTON_REBOOT=y
CONFIG_NWFLASH=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CYBER2000=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_MAUI is not set
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_SOUND_WAVEARTIST=y
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
#
# Console Switches
#
# CONFIG_SWITCHES is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Kernel hacking
#
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=y
arch/arm/configs/shark_defconfig
View file @ 42c1faa2
......@@ -10,6 +10,10 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
......@@ -19,6 +23,14 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
......@@ -35,7 +47,6 @@ CONFIG_KMOD=y
#
# CONFIG_ARCH_ADIFCC is not set
# CONFIG_ARCH_ANAKIN is not set
# CONFIG_ARCH_ARCA5K is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
......@@ -44,20 +55,12 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_SHARK=y
#
# Archimedes/A5000 Implementations
#
#
# Archimedes/A5000 Implementations (select only ONE)
#
#
# CLPS711X/EP721X Implementations
#
......@@ -71,11 +74,13 @@ CONFIG_ARCH_SHARK=y
#
#
# IOP310 Implementation Options
# IOP3xx Implementation Options
#
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_IOP321 is not set
#
# IOP310 Chipset Features
# IOP3xx Chipset Features
#
#
......@@ -92,6 +97,10 @@ CONFIG_ARCH_SHARK=y
CONFIG_CPU_32=y
CONFIG_CPU_SA110=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WB=y
#
# Processor Features
......@@ -116,11 +125,13 @@ CONFIG_PCI_LEGACY_PROC=y
#
# CONFIG_FPE_NWFPE is not set
CONFIG_FPE_FASTFPE=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Generic Driver Options
#
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_ARTHUR is not set
......@@ -164,6 +175,7 @@ CONFIG_PARPORT_PC_CML1=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
......@@ -185,7 +197,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
......@@ -199,8 +210,11 @@ CONFIG_INET=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
......@@ -209,9 +223,9 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
......@@ -239,13 +253,13 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_SMC91X is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
......@@ -294,8 +308,14 @@ CONFIG_CS89x0=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
......@@ -306,10 +326,12 @@ CONFIG_CS89x0=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
# CONFIG_HOSTAP is not set
#
# Token Ring devices (depends on LLC=y)
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
......@@ -319,48 +341,55 @@ CONFIG_CS89x0=y
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Amateur Radio support
# Bluetooth support
#
# CONFIG_HAMRADIO is not set
# CONFIG_BT is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
......@@ -395,7 +424,6 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
......@@ -407,15 +435,13 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
......@@ -425,6 +451,7 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
......@@ -486,6 +513,7 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
......@@ -497,7 +525,9 @@ CONFIG_MOUSE_PS2=y
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -505,6 +535,7 @@ CONFIG_MOUSE_PS2=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -526,12 +557,17 @@ CONFIG_PRINTER=m
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# L3 serial bus support
......@@ -566,13 +602,22 @@ CONFIG_RTC=y
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
......@@ -581,6 +626,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
......@@ -618,6 +664,8 @@ CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
......@@ -642,6 +690,7 @@ CONFIG_RAMFS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
......@@ -739,10 +788,25 @@ CONFIG_FB_CYBER2000=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
......@@ -769,7 +833,6 @@ CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
......@@ -779,6 +842,7 @@ CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
# CONFIG_SOUND_SGALAXY is not set
CONFIG_SOUND_ADLIB=m
# CONFIG_SOUND_ACI_MIXER is not set
......@@ -803,6 +867,11 @@ CONFIG_SOUND_SB=m
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# Misc devices
......@@ -822,11 +891,7 @@ CONFIG_SOUND_SB=m
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_USB_GADGET is not set
#
# Kernel hacking
......
arch/arm/kernel/armksyms.c
View file @ 42c1faa2
......@@ -68,8 +68,8 @@ extern void __umoddi3(void);
extern void __udivmoddi4(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
extern void abort(void);
extern void do_div64(void);
extern void ret_from_exception(void);
extern void fpundefinstr(void);
......@@ -223,7 +223,7 @@ EXPORT_SYMBOL_NOVERS(__umoddi3);
EXPORT_SYMBOL_NOVERS(__udivmoddi4);
EXPORT_SYMBOL_NOVERS(__udivsi3);
EXPORT_SYMBOL_NOVERS(__umodsi3);
EXPORT_SYMBOL_NOVERS(do_div64);
EXPORT_SYMBOL_NOVERS(__do_div64);
/* bitops */
EXPORT_SYMBOL(_set_bit_le);
......
arch/arm/kernel/calls.S
View file @ 42c1faa2
......@@ -271,6 +271,20 @@ __syscall_start:
.long sys_ni_syscall /* sys_set_thread_area */
/* 255 */ .long sys_ni_syscall /* sys_get_thread_area */
.long sys_ni_syscall /* sys_set_tid_address */
.long sys_timer_create
.long sys_timer_settime
.long sys_timer_gettime
/* 260 */ .long sys_timer_getoverrun
.long sys_timer_delete
.long sys_clock_settime
.long sys_clock_gettime
.long sys_clock_getres
/* 265 */ .long sys_clock_nanosleep
.long sys_statfs64
.long sys_fstatfs64
.long sys_tgkill
.long sys_utimes
/* 270 */ .long sys_fadvise64_64
__syscall_end:
.rept NR_syscalls - (__syscall_end - __syscall_start) / 4
......
arch/arm/lib/div64.S
View file @ 42c1faa2
/*
* linux/arch/arm/lib/div64.S
*
* Optimized computation of 64-bit dividend / 32-bit divisor
*
* Author: Nicolas Pitre
* Created: Oct 5, 2003
* Copyright: Monta Vista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#ifndef __ARMEB__
ql .req r0 @ quotient low
qh .req r1 @ quotient high
onl .req r0 @ original dividend low
onh .req r1 @ original dividend high
nl .req r4 @ dividend low
nh .req r5 @ dividend high
res .req r4 @ result
#ifdef __ARMEB__
#define xh r0
#define xl r1
#define yh r2
#define yl r3
#else
ql .req r1
qh .req r0
onl .req r1
onh .req r0
nl .req r5
nh .req r4
res .req r5
#define xl r0
#define xh r1
#define yl r2
#define yh r3
#endif
dl .req r3 @ divisor low
dh .req r2 @ divsor high
ENTRY(do_div64)
stmfd sp!, {r4, r5, lr}
mov nl, onl
movs nh, onh @ if high bits are zero
movne lr, #33
moveq lr, #1 @ only divide low bits
moveq nh, onl
tst dh, #0x80000000
bne 2f
1: cmp nh, dh
bls 2f
add lr, lr, #1
movs dh, dh, lsl #1 @ left justify disor
bpl 1b
2: movs nh, onh
moveq dl, dh
moveq dh, #0
movne dl, #0
mov ql, #0
mov qh, #0
3: subs ip, nl, dl @ trial subtraction
sbcs ip, nh, dh
movcs nh, ip @ only update if successful
subcs nl, nl, dl @ (repeat the subtraction)
adcs ql, ql, ql @ C=1 if successful, shift into
adc qh, qh, qh @ quotient
movs dh, dh, lsr #1 @ shift base high part right
mov dl, dl, rrx @ shift base low part right
subs lr, lr, #1
bne 3b
mov r2, res
ldmfd sp!, {r4, r5, pc}
/*
* __do_div64: perform a division with 64-bit dividend and 32-bit divisor.
*
* Note: Calling convention is totally non standard for optimal code.
* This is meant to be used by do_div() from include/asm/div64.h only.
*
* Input parameters:
* xh-xl = dividend (clobbered)
* r4 = divisor (preserved)
*
* Output values:
* yh-yl = result
* xh = remainder
*
* Clobbered regs: xl, ip
*/
ENTRY(__do_div64)
@ Test for easy paths first.
subs ip, r4, #1
bls 9f @ divisor is 0 or 1
tst ip, r4
beq 8f @ divisor is power of 2
@ See if we need to handle upper 32-bit result.
cmp xh, r4
mov yh, #0
blo 3f
@ Align divisor with upper part of dividend.
@ The aligned divisor is stored in yl preserving the original.
@ The bit position is stored in ip.
#if __LINUX_ARM_ARCH__ >= 5
clz yl, r4
clz ip, xh
sub yl, yl, ip
mov ip, #1
mov ip, ip, lsl yl
mov yl, r4, lsl yl
#else
mov yl, r4
mov ip, #1
1: cmp yl, #0x80000000
cmpcc yl, xh
movcc yl, yl, lsl #1
movcc ip, ip, lsl #1
bcc 1b
#endif
@ The division loop for needed upper bit positions.
@ Break out early if dividend reaches 0.
2: cmp xh, yl
orrcs yh, yh, ip
subcss xh, xh, yl
movnes ip, ip, lsr #1
mov yl, yl, lsr #1
bne 2b
@ See if we need to handle lower 32-bit result.
3: cmp xh, #0
mov yl, #0
cmpeq xl, r4
movlo xh, xl
movlo pc, lr
@ The division loop for lower bit positions.
@ Here we shift remainer bits leftwards rather than moving the
@ divisor for comparisons, considering the carry-out bit as well.
mov ip, #0x80000000
4: movs xl, xl, lsl #1
adcs xh, xh, xh
beq 6f
cmpcc xh, r4
5: orrcs yl, yl, ip
subcs xh, xh, r4
movs ip, ip, lsr #1
bne 4b
mov pc, lr
@ The top part of remainder became zero. If carry is set
@ (the 33th bit) this is a false positive so resume the loop.
@ Otherwise, if lower part is also null then we are done.
6: bcs 5b
cmp xl, #0
moveq pc, lr
@ We still have remainer bits in the low part. Bring them up.
#if __LINUX_ARM_ARCH__ >= 5
clz xh, xl @ we know xh is zero here so...
add xh, xh, #1
mov xl, xl, lsl xh
mov ip, ip, lsr xh
#else
7: movs xl, xl, lsl #1
mov ip, ip, lsr #1
bcc 7b
#endif
@ Current remainder is now 1. It is worthless to compare with
@ divisor at this point since divisor can not be smaller than 3 here.
@ If possible, branch for another shift in the division loop.
@ If no bit position left then we are done.
movs ip, ip, lsr #1
mov xh, #1
bne 4b
mov pc, lr
8: @ Division by a power of 2: determine what that divisor order is
@ then simply shift values around
#if __LINUX_ARM_ARCH__ >= 5
clz ip, r4
rsb ip, ip, #31
#else
mov yl, r4
cmp r4, #(1 << 16)
mov ip, #0
movhs yl, yl, lsr #16
movhs ip, #16
cmp yl, #(1 << 8)
movhs yl, yl, lsr #8
addhs ip, ip, #8
cmp yl, #(1 << 4)
movhs yl, yl, lsr #4
addhs ip, ip, #4
cmp yl, #(1 << 2)
addhi ip, ip, #3
addls ip, ip, yl, lsr #1
#endif
mov yh, xh, lsr ip
mov yl, xl, lsr ip
rsb ip, ip, #32
orr yl, yl, xh, lsl ip
mov xh, xl, lsl ip
mov xh, xh, lsr ip
mov pc, lr
@ eq -> division by 1: obvious enough...
9: moveq yl, xl
moveq yh, xh
moveq xh, #0
moveq pc, lr
@ Division by 0:
str lr, [sp, #-4]!
bl __div0
@ as wrong as it could be...
mov yl, #0
mov yh, #0
mov xh, #0
ldr pc, [sp], #4
arch/arm/mach-clps711x/time.c
View file @ 42c1faa2
......@@ -40,6 +40,7 @@ static unsigned long clps711x_gettimeoffset(void)
void __init clps711x_setup_timer(void)
{
struct timespec tv;
unsigned int syscon;
gettimeoffset = clps711x_gettimeoffset;
......@@ -50,5 +51,7 @@ void __init clps711x_setup_timer(void)
clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
xtime.tv_sec = clps_readl(RTCDR);
tv.tv_nsec = 0;
tv.tv_sec = clps_readl(RTCDR);
do_settimeofday(&tv);
}
arch/arm/mach-integrator/integrator_ap.c
View file @ 42c1faa2
......@@ -126,7 +126,7 @@ static void __init ap_init_irq(void)
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
for (i = 0; i < NR_IRQS; i++) {
if (((1 << i) && INTEGRATOR_SC_VALID_INT) != 0) {
if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) {
set_irq_chip(i, &sc_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
......
arch/arm/mm/cache-v3.S
View file @ 42c1faa2
......@@ -32,14 +32,14 @@ ENTRY(v3_flush_kern_cache_all)
/* FALLTHROUGH */
/*
* flush_user_cache_range(start, end, vm_flags)
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (may not be aligned)
* - end - end address (exclusive, may not be aligned)
* - vma - vma_area_struct describing address space
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v3_flush_user_cache_range)
mov ip, #0
......
arch/arm/mm/cache-v4.S
View file @ 42c1faa2
......@@ -34,14 +34,14 @@ ENTRY(v4_flush_kern_cache_all)
mov pc, lr
/*
* flush_user_cache_range(start, end, vma)
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (may not be aligned)
* - end - end address (exclusive, may not be aligned)
* - vma - vma_area_struct describing address space
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4_flush_user_cache_range)
mov ip, #0
......
arch/arm/mm/cache-v4wb.S
View file @ 42c1faa2
......@@ -72,14 +72,14 @@ __flush_whole_cache:
mov pc, lr
/*
* flush_user_cache_range(start, end, vm_flags)
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (inclusive, page aligned)
* - end - end address (exclusive, page aligned)
* - vma - vma_area_struct describing address space
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4wb_flush_user_cache_range)
sub r3, r1, r0 @ calculate total size
......
arch/arm/mm/cache-v4wt.S
View file @ 42c1faa2
......@@ -64,14 +64,14 @@ __flush_whole_cache:
mov pc, lr
/*
* flush_user_cache_range(start, end, vm_flags)
* flush_user_cache_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (inclusive, page aligned)
* - end - end address (exclusive, page aligned)
* - vma - vma_area_struct describing address space
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4wt_flush_user_cache_range)
sub r3, r1, r0 @ calculate total size
......
drivers/acorn/char/i2c.c
View file @ 42c1faa2
......@@ -280,13 +280,15 @@ static int ioc_client_reg(struct i2c_client *client)
client->addr == 0x50) {
struct rtc_tm rtctm;
unsigned int year;
struct timespec tv;
rtc_client = client;
get_rtc_time(&rtctm, &year);
xtime.tv_nsec = rtctm.cs * 10000000;
xtime.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
tv.tv_nsec = rtctm.cs * 10000000;
tv.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
rtctm.hours, rtctm.mins, rtctm.secs);
do_settimeofday(&tv);
set_rtc = k_set_rtc_time;
}
......
include/asm-arm/arch-ebsa285/time.h
View file @ 42c1faa2
......@@ -243,6 +243,7 @@ void __init time_init(void)
if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
CMOS_READ(RTC_REG_B) == reg_b) {
struct timespec tv;
/*
* We have a RTC. Check the battery
......@@ -250,7 +251,9 @@ void __init time_init(void)
if ((reg_d & 0x80) == 0)
printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
xtime.tv_sec = get_isa_cmos_time();
tv.tv_nsec = 0;
tv.tv_sec = get_isa_cmos_time();
do_settimeofday(&tv);
set_rtc = set_isa_cmos_time;
} else
rtc_base = 0;
......
include/asm-arm/arch-pxa/time.h
View file @ 42c1faa2
......@@ -33,7 +33,7 @@ static int pxa_set_rtc(void)
/* IRQs are disabled before entering here from do_gettimeofday() */
static unsigned long pxa_gettimeoffset (void)
{
unsigned long ticks_to_match, elapsed, usec;
long ticks_to_match, elapsed, usec;
/* Get ticks before next timer match */
ticks_to_match = OSMR0 - OSCR;
......@@ -41,6 +41,10 @@ static unsigned long pxa_gettimeoffset (void)
/* We need elapsed ticks since last match */
elapsed = LATCH - ticks_to_match;
/* don't get fooled by the workaround in pxa_timer_interrupt() */
if (elapsed <= 0)
return 0;
/* Now convert them to usec */
usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
......@@ -59,6 +63,15 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
* IRQs are disabled inside the loop to ensure coherence between
* lost_ticks (updated in do_timer()) and the match reg value, so we
* can use do_gettimeofday() from interrupt handlers.
*
* HACK ALERT: it seems that the PXA timer regs aren't updated right
* away in all cases when a write occurs. We therefore compare with
* 8 instead of 0 in the while() condition below to avoid missing a
* match if OSCR has already reached the next OSMR value.
* Experience has shown that up to 6 ticks are needed to work around
* this problem, but let's use 8 to be conservative. Note that this
* affect things only when the timer IRQ has been delayed by nearly
* exactly one tick period which should be a pretty rare event.
*/
do {
do_leds();
......@@ -66,16 +79,22 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
do_timer(regs);
OSSR = OSSR_M0; /* Clear match on timer 0 */
next_match = (OSMR0 += LATCH);
} while( (signed long)(next_match - OSCR) <= 0 );
} while( (signed long)(next_match - OSCR) <= 8 );
return IRQ_HANDLED;
}
void __init time_init(void)
{
struct timespec tv;
gettimeoffset = pxa_gettimeoffset;
set_rtc = pxa_set_rtc;
xtime.tv_sec = pxa_get_rtc_time();
tv.tv_nsec = 0;
tv.tv_sec = pxa_get_rtc_time();
do_settimeofday(&tv);
timer_irq.handler = pxa_timer_interrupt;
OSMR0 = 0; /* set initial match at 0 */
OSSR = 0xf; /* clear status on all timers */
......
include/asm-arm/arch-sa1100/time.h
View file @ 42c1faa2
......@@ -92,9 +92,15 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
void __init time_init(void)
{
struct timespec tv;
gettimeoffset = sa1100_gettimeoffset;
set_rtc = sa1100_set_rtc;
xtime.tv_sec = sa1100_get_rtc_time();
tv.tv_nsec = 0;
tv.tv_sec = sa1100_get_rtc_time();
do_settimeofday(&tv);
timer_irq.handler = sa1100_timer_interrupt;
OSMR0 = 0; /* set initial match at 0 */
OSSR = 0xf; /* clear status on all timers */
......
include/asm-arm/arch-shark/time.h
View file @ 42c1faa2
......@@ -34,8 +34,6 @@ void __init time_init(void)
outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
outb(HZ_TIME >> 8, 0x40);
xtime.tv_sec = 0;
timer_irq.handler = timer_interrupt;
setup_irq(IRQ_TIMER, &timer_irq);
}
include/asm-arm/div64.h
View file @ 42c1faa2
#ifndef __ASM_ARM_DIV64
#define __ASM_ARM_DIV64
/* We're not 64-bit, but... */
/*
* The semantics of do_div() are:
*
* uint32_t do_div(uint64_t *n, uint32_t base)
* {
* uint32_t remainder = *n % base;
* *n = *n / base;
* return remainder;
* }
*
* In other words, a 64-bit dividend with a 32-bit divisor producing
* a 64-bit result and a 32-bit remainder. To accomplish this optimally
* we call a special __do_div64 helper with completely non standard
* calling convention for arguments and results (beware).
*/
#ifdef __ARMEB__
#define __xh "r0"
#define __xl "r1"
#else
#define __xl "r0"
#define __xh "r1"
#endif
#define do_div(n,base) \
({ \
register int __res asm("r2") = base; \
register unsigned int __base asm("r4") = base; \
register unsigned long long __n asm("r0") = n; \
asm("bl do_div64" \
: "=r" (__n), "=r" (__res) \
: "0" (__n), "1" (__res) \
: "r3", "ip", "lr", "cc"); \
n = __n; \
__res; \
register unsigned long long __res asm("r2"); \
register unsigned int __rem asm(__xh); \
asm("bl __do_div64" \
: "=r" (__rem), "=r" (__res) \
: "r" (__n), "r" (__base) \
: "ip", "lr", "cc"); \
n = __res; \
__rem; \
})
#endif
include/asm-arm/kmap_types.h
View file @ 42c1faa2
......@@ -5,8 +5,21 @@
* This is the "bare minimum". AIO seems to require this.
*/
enum km_type {
KM_BOUNCE_READ,
KM_SKB_SUNRPC_DATA,
KM_SKB_DATA_SOFTIRQ,
KM_USER0,
KM_USER1,
KM_BIO_SRC_IRQ,
KM_BIO_DST_IRQ,
KM_PTE0,
KM_PTE1,
KM_PTE2,
KM_IRQ0,
KM_USER1
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
KM_TYPE_NR
};
#endif
include/asm-arm/unaligned.h
View file @ 42c1faa2
......@@ -159,7 +159,7 @@ static inline void __put_unaligned_8_be(const unsigned long long __v, register _
(void) 0; \
})
#define put_unaligned_be(val,ptr) \
#define __put_unaligned_be(val,ptr) \
({ \
switch (sizeof(*(ptr))) { \
case 1: \
......
include/asm-arm/unistd.h
View file @ 42c1faa2
......@@ -282,6 +282,20 @@
/* 254 for set_thread_area */
/* 255 for get_thread_area */
/* 256 for set_tid_address */
#define __NR_timer_create (__NR_SYSCALL_BASE+257)
#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
#define __NR_tgkill (__NR_SYSCALL_BASE+268)
#define __NR_utimes (__NR_SYSCALL_BASE+269)
#define __NR_fadvise64_64 (__NR_SYSCALL_BASE+270)
/*
* The following SWIs are ARM private.
......
sound/oss/vidc.c
View file @ 42c1faa2
......@@ -41,6 +41,7 @@
#endif
#define VIDC_SOUND_CLOCK (250000)
#define VIDC_SOUND_CLOCK_EXT (176400)
/*
* When using SERIAL SOUND mode (external DAC), the number of physical
......@@ -81,17 +82,9 @@ static unsigned char vidc_level_r[SOUND_MIXER_NRDEVICES] = {
static unsigned int vidc_audio_volume_l; /* left PCM vol, 0 - 65536 */
static unsigned int vidc_audio_volume_r; /* right PCM vol, 0 - 65536 */
static void (*old_mksound)(unsigned int hz, unsigned int ticks);
extern void (*kd_mksound)(unsigned int hz, unsigned int ticks);
extern void vidc_update_filler(int bits, int channels);
extern int softoss_dev;
static void
vidc_mksound(unsigned int hz, unsigned int ticks)
{
// printk("BEEP - %d %d!\n", hz, ticks);
}
static void
vidc_mixer_set(int mdev, unsigned int level)
{
......@@ -193,28 +186,50 @@ static unsigned int vidc_audio_set_format(int dev, unsigned int fmt)
return vidc_audio_format;
}
#define my_abs(i) ((i)<0 ? -(i) : (i))
static int vidc_audio_set_speed(int dev, int rate)
{
if (rate) {
unsigned int hwctrl, hwrate;
unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext;
unsigned int diff_int, diff_ext;
unsigned int newsize, new2size;
/*
* If we have selected 44.1kHz, use the DAC clock.
*/
if (0 && rate == 44100) {
hwctrl = 0x00000002;
hwrate = 3;
} else {
hwctrl = 0x00000003;
/* Using internal clock */
hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1;
if (hwrate < 3)
hwrate = 3;
if (hwrate > 255)
hwrate = 255;
rate = VIDC_SOUND_CLOCK / hwrate;
/* Using exernal clock */
hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1;
if (hwrate_ext < 3)
hwrate_ext = 3;
if (hwrate_ext > 255)
hwrate_ext = 255;
rate_int = VIDC_SOUND_CLOCK / hwrate;
rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext;
/* Chose between external and internal clock */
diff_int = my_abs(rate_ext-rate);
diff_ext = my_abs(rate_int-rate);
if (diff_ext < diff_int) {
/*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/
hwrate=hwrate_ext;
hwctrl=0x00000002;
/* Allow roughly 0.4% tolerance */
if (diff_ext > (rate/256))
rate=rate_ext;
} else {
/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
hwctrl=0x00000003;
/* Allow rougly 0.4% tolerance */
if (diff_int > (rate/256))
rate=rate_int;
}
vidc_writel(0xb0000000 | (hwrate - 2));
......@@ -233,6 +248,7 @@ static int vidc_audio_set_speed(int dev, int rate)
newsize, new2size);
new2size = 4096;
}
/*printk("VIDC: dma size %d\n", new2size);*/
dma_bufsize = new2size;
vidc_audio_rate = rate;
}
......@@ -471,8 +487,6 @@ static void __init attach_vidc(struct address_info *hw_config)
printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq);
goto irq_failed;
}
old_mksound = kd_mksound;
kd_mksound = vidc_mksound;
vidc_adev = adev;
vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
......@@ -510,9 +524,6 @@ static void __exit unload_vidc(struct address_info *hw_config)
vidc_adev = -1;
if (old_mksound)
kd_mksound = old_mksound;
free_irq(hw_config->irq, &dma_start);
sound_free_dma(hw_config->dma);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7