Merge bk://bk.arm.linux.org.uk/linux-2.6-exp

into home.osdl.org:/home/torvalds/v2.5/linux

arch/arm/boot/compressed/Makefile

@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_INTEGRATOR),y)
-OBJS		+= head-integrator.o
-endif
-
 ifeq ($(CONFIG_ARCH_CAMELOT),y)
 OBJS		+= head-epxa10db.o
 endif

arch/arm/boot/compressed/head-integrator.S

-#include <asm/mach-types.h>
-
-		.section	".start", "ax"
-		mov	r7, #MACH_TYPE_INTEGRATOR

arch/arm/boot/compressed/head.S

@@ -503,12 +503,6 @@ proc_types:
 
 		@ Everything from here on will be the new ID system.
 
-		.word	0x41129200		@ ARM920T
-		.word	0xff00fff0
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
-
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
 		b	__armv4_cache_on
@@ -523,6 +517,12 @@ proc_types:
 
 		@ These match on the architecture ID
 
+		.word	0x00020000		@ ARMv4T
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
 		b	__armv4_cache_on

arch/arm/common/sa1111.c

@@ -34,6 +34,8 @@
 
 #include <asm/hardware/sa1111.h>
 
+extern void __init sa1110_mb_enable(void);
+
 /*
  * We keep the following data for the overall SA1111.  Note that the
  * struct device and struct resource are "fake"; they should be supplied
@@ -561,6 +563,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->res.name    = dev->dev.bus_id;
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
+	dev->skpcr_mask  = info->skpcr_mask;
+	memmove(dev->irq, info->irq, sizeof(dev->irq));
 
 	ret = request_resource(parent, &dev->res);
 	if (ret) {

arch/arm/configs/netwinder_defconfig

+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+CONFIG_ARCH_FOOTBRIDGE=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+
+#
+# Epxa10db
+#
+
+#
+# Footbridge Implementations
+#
+# CONFIG_ARCH_CATS is not set
+# CONFIG_ARCH_PERSONAL_SERVER is not set
+# CONFIG_ARCH_EBSA285_ADDIN is not set
+# CONFIG_ARCH_EBSA285_HOST is not set
+CONFIG_ARCH_NETWINDER=y
+
+#
+# IOP3xx Implementation Options
+#
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
+
+#
+# IOP3xx Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
+
+#
+# SA11x0 Implementations
+#
+CONFIG_FOOTBRIDGE=y
+CONFIG_FOOTBRIDGE_HOST=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA110=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+
+#
+# General setup
+#
+CONFIG_PCI=y
+CONFIG_ISA=y
+CONFIG_ISA_DMA=y
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+# CONFIG_HOTPLUG is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=0x301"
+CONFIG_LEDS=y
+# CONFIG_LEDS_TIMER is not set
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_CML1=y
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_ARC is not set
+# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_FTP=y
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_LIMIT is not set
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_MAC is not set
+# CONFIG_IP_NF_MATCH_PKTTYPE is not set
+# CONFIG_IP_NF_MATCH_MARK is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_LENGTH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_TCPMSS is not set
+# CONFIG_IP_NF_MATCH_HELPER is not set
+# CONFIG_IP_NF_MATCH_STATE is not set
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_NAT is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDEDMA_PCI_WIP is not set
+CONFIG_BLK_DEV_ADMA=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_TSLIBDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_DZ is not set
+# CONFIG_SERIAL_21285 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# I2C Algorithms
+#
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Mice
+#
+CONFIG_BUSMOUSE=y
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_WDT is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_21285_WATCHDOG is not set
+CONFIG_977_WATCHDOG=y
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_I810_TCO is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_SCx200_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_AMD7XX_TCO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_CPU5_WDT is not set
+CONFIG_DS1620=y
+CONFIG_NWBUTTON=y
+CONFIG_NWBUTTON_REBOOT=y
+CONFIG_NWFLASH=y
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SMB_NLS=y
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CYBER2000=y
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_SOUND_OSS=y
+CONFIG_SOUND_TRACEINIT=y
+CONFIG_SOUND_DMAP=y
+# CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_AD1889 is not set
+# CONFIG_SOUND_SGALAXY is not set
+# CONFIG_SOUND_ADLIB is not set
+# CONFIG_SOUND_ACI_MIXER is not set
+# CONFIG_SOUND_CS4232 is not set
+# CONFIG_SOUND_SSCAPE is not set
+# CONFIG_SOUND_GUS is not set
+# CONFIG_SOUND_VMIDI is not set
+# CONFIG_SOUND_TRIX is not set
+# CONFIG_SOUND_MSS is not set
+# CONFIG_SOUND_MPU401 is not set
+# CONFIG_SOUND_NM256 is not set
+# CONFIG_SOUND_MAD16 is not set
+# CONFIG_SOUND_PAS is not set
+# CONFIG_SOUND_PSS is not set
+# CONFIG_SOUND_SB is not set
+# CONFIG_SOUND_AWE32_SYNTH is not set
+# CONFIG_SOUND_MAUI is not set
+CONFIG_SOUND_YM3812=y
+# CONFIG_SOUND_OPL3SA1 is not set
+# CONFIG_SOUND_OPL3SA2 is not set
+# CONFIG_SOUND_YMFPCI is not set
+# CONFIG_SOUND_UART6850 is not set
+# CONFIG_SOUND_AEDSP16 is not set
+CONFIG_SOUND_WAVEARTIST=y
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y

arch/arm/configs/shark_defconfig

@@ -10,6 +10,10 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+# CONFIG_STANDALONE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
@@ -19,6 +23,14 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
 
 #
 # Loadable module support
@@ -35,7 +47,6 @@ CONFIG_KMOD=y
 #
 # CONFIG_ARCH_ADIFCC is not set
 # CONFIG_ARCH_ANAKIN is not set
-# CONFIG_ARCH_ARCA5K is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -44,20 +55,12 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_SHARK=y
 
-#
-# Archimedes/A5000 Implementations
-#
-
-#
-# Archimedes/A5000 Implementations (select only ONE)
-#
-
 #
 # CLPS711X/EP721X Implementations
 #
@@ -71,11 +74,13 @@ CONFIG_ARCH_SHARK=y
 #
 
 #
-# IOP310 Implementation Options
+# IOP3xx Implementation Options
 #
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_IOP321 is not set
 
 #
-# IOP310 Chipset Features
+# IOP3xx Chipset Features
 #
 
 #
@@ -92,6 +97,10 @@ CONFIG_ARCH_SHARK=y
 CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WB=y
 
 #
 # Processor Features
@@ -116,11 +125,13 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
 # CONFIG_PM is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_ARTHUR is not set
@@ -164,6 +175,7 @@ CONFIG_PARPORT_PC_CML1=y
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -185,7 +197,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 # CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -199,8 +210,11 @@ CONFIG_INET=y
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -209,9 +223,9 @@ CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_NET_DIVERT is not set
@@ -239,13 +253,13 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
@@ -294,8 +308,14 @@ CONFIG_CS89x0=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
@@ -306,10 +326,12 @@ CONFIG_CS89x0=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Token Ring devices
 #
+# CONFIG_TR is not set
 # CONFIG_NET_FC is not set
 # CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
@@ -319,48 +341,55 @@ CONFIG_CS89x0=y
 #
 # CONFIG_WAN is not set
 
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
 #
 # IrDA (infrared) support
 #
 # CONFIG_IRDA is not set
 
 #
-# Amateur Radio support
+# Bluetooth support
 #
-# CONFIG_HAMRADIO is not set
+# CONFIG_BT is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
-# CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_IDEDISK_STROKE is not set
 CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
 
 #
 # IDE chipset support/bugfixes
 #
 # CONFIG_BLK_DEV_IDEPCI is not set
 # CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -395,7 +424,6 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
@@ -407,15 +435,13 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PCI2000 is not set
 # CONFIG_SCSI_PCI2220I is not set
@@ -425,6 +451,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
@@ -486,6 +513,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
@@ -497,7 +525,9 @@ CONFIG_MOUSE_PS2=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -505,6 +535,7 @@ CONFIG_MOUSE_PS2=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -526,12 +557,17 @@ CONFIG_PRINTER=m
 # CONFIG_I2C is not set
 
 #
-# I2C Hardware Sensors Mainboard support
+# I2C Algorithms
+#
+
+#
+# I2C Hardware Bus support
 #
 
 #
 # I2C Hardware Sensors Chip support
 #
+# CONFIG_I2C_SENSOR is not set
 
 #
 # L3 serial bus support
@@ -566,13 +602,22 @@ CONFIG_RTC=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
 
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
 #
 # File systems
 #
@@ -581,6 +626,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -618,6 +664,8 @@ CONFIG_DEVFS_MOUNT=y
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS is not set
 # CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
 #
@@ -642,6 +690,7 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
@@ -739,10 +788,25 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
 
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
 #
 # Logo configuration
 #
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -769,7 +833,6 @@ CONFIG_SOUND_PRIME=m
 # CONFIG_SOUND_MAESTRO is not set
 # CONFIG_SOUND_MAESTRO3 is not set
 # CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
 # CONFIG_SOUND_SONICVIBES is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
@@ -779,6 +842,7 @@ CONFIG_SOUND_OSS=m
 # CONFIG_SOUND_TRACEINIT is not set
 # CONFIG_SOUND_DMAP is not set
 # CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_AD1889 is not set
 # CONFIG_SOUND_SGALAXY is not set
 CONFIG_SOUND_ADLIB=m
 # CONFIG_SOUND_ACI_MIXER is not set
@@ -803,6 +867,11 @@ CONFIG_SOUND_SB=m
 # CONFIG_SOUND_YMFPCI is not set
 # CONFIG_SOUND_UART6850 is not set
 # CONFIG_SOUND_AEDSP16 is not set
+# CONFIG_SOUND_KAHLUA is not set
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_AD1980 is not set
 
 #
 # Misc devices
@@ -822,11 +891,7 @@ CONFIG_SOUND_SB=m
 # USB support
 #
 # CONFIG_USB is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_USB_GADGET is not set
 
 #
 # Kernel hacking

arch/arm/kernel/armksyms.c

@@ -68,8 +68,8 @@ extern void __umoddi3(void);
 extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
+extern void __do_div64(void);
 extern void abort(void);
-extern void do_div64(void);
 
 extern void ret_from_exception(void);
 extern void fpundefinstr(void);
@@ -223,7 +223,7 @@ EXPORT_SYMBOL_NOVERS(__umoddi3);
 EXPORT_SYMBOL_NOVERS(__udivmoddi4);
 EXPORT_SYMBOL_NOVERS(__udivsi3);
 EXPORT_SYMBOL_NOVERS(__umodsi3);
-EXPORT_SYMBOL_NOVERS(do_div64);
+EXPORT_SYMBOL_NOVERS(__do_div64);
 
 	/* bitops */
 EXPORT_SYMBOL(_set_bit_le);

arch/arm/kernel/calls.S

@@ -271,6 +271,20 @@ __syscall_start:
 		.long	sys_ni_syscall	/* sys_set_thread_area */
 /* 255 */	.long	sys_ni_syscall	/* sys_get_thread_area */
  		.long	sys_ni_syscall	/* sys_set_tid_address */
+		.long	sys_timer_create
+		.long	sys_timer_settime
+		.long	sys_timer_gettime
+/* 260 */	.long	sys_timer_getoverrun
+		.long	sys_timer_delete
+		.long	sys_clock_settime
+		.long	sys_clock_gettime
+		.long	sys_clock_getres
+/* 265 */	.long	sys_clock_nanosleep
+		.long	sys_statfs64
+		.long	sys_fstatfs64
+		.long	sys_tgkill
+		.long	sys_utimes
+/* 270 */	.long	sys_fadvise64_64
 __syscall_end:
 
 		.rept	NR_syscalls - (__syscall_end - __syscall_start) / 4

arch/arm/lib/div64.S

+/*
+ *  linux/arch/arm/lib/div64.S
+ *
+ *  Optimized computation of 64-bit dividend / 32-bit divisor
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Oct 5, 2003
+ *  Copyright:	Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
 #include <linux/linkage.h>
 
-#ifndef __ARMEB__
-ql	.req	r0			@ quotient low
-qh	.req	r1			@ quotient high
-onl	.req	r0			@ original dividend low
-onh	.req	r1			@ original dividend high
-nl	.req	r4			@ dividend low
-nh	.req	r5			@ dividend high
-res	.req	r4			@ result
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
 #else
-ql	.req	r1
-qh	.req	r0
-onl	.req	r1
-onh	.req	r0
-nl	.req	r5
-nh	.req	r4
-res	.req	r5
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
 #endif
 
-dl	.req	r3			@ divisor low
-dh	.req	r2			@ divsor high
-
-
-ENTRY(do_div64)
-	stmfd	sp!, {r4, r5, lr}
-	mov	nl, onl
-	movs	nh, onh			@ if high bits are zero
-	movne	lr, #33
-	moveq	lr, #1			@ only divide low bits
-	moveq	nh, onl
-
-	tst	dh, #0x80000000
-	bne	2f
-1:	cmp	nh, dh
-	bls	2f
-	add	lr, lr, #1
-	movs	dh, dh, lsl #1		@ left justify disor
-	bpl	1b
-
-2:	movs	nh, onh
-	moveq	dl, dh
-	moveq	dh, #0
-	movne	dl, #0
-	mov	ql, #0
-	mov	qh, #0
-3:	subs	ip, nl, dl		@ trial subtraction
-	sbcs	ip, nh, dh
-	movcs	nh, ip			@ only update if successful
-	subcs	nl, nl, dl		@ (repeat the subtraction)
-	adcs	ql, ql, ql		@ C=1 if successful, shift into
-	adc	qh, qh, qh		@ quotient
-	movs	dh, dh, lsr #1		@ shift base high part right
-	mov	dl, dl, rrx		@ shift base low part right
-	subs	lr, lr, #1
-	bne	3b
-
-	mov	r2, res
-	ldmfd	sp!, {r4, r5, pc}
+/*
+ * __do_div64: perform a division with 64-bit dividend and 32-bit divisor.
+ *
+ * Note: Calling convention is totally non standard for optimal code.
+ *       This is meant to be used by do_div() from include/asm/div64.h only.
+ *
+ * Input parameters:
+ * 	xh-xl	= dividend (clobbered)
+ * 	r4	= divisor (preserved)
+ *
+ * Output values:
+ * 	yh-yl	= result
+ * 	xh	= remainder
+ *
+ * Clobbered regs: xl, ip
+ */
+
+ENTRY(__do_div64)
+
+	@ Test for easy paths first.
+	subs	ip, r4, #1
+	bls	9f			@ divisor is 0 or 1
+	tst	ip, r4
+	beq	8f			@ divisor is power of 2
+
+	@ See if we need to handle upper 32-bit result.
+	cmp	xh, r4
+	mov	yh, #0
+	blo	3f
+
+	@ Align divisor with upper part of dividend.
+	@ The aligned divisor is stored in yl preserving the original.
+	@ The bit position is stored in ip.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	yl, r4
+	clz	ip, xh
+	sub	yl, yl, ip
+	mov	ip, #1
+	mov	ip, ip, lsl yl
+	mov	yl, r4, lsl yl
+
+#else
+
+	mov	yl, r4
+	mov	ip, #1
+1:	cmp	yl, #0x80000000
+	cmpcc	yl, xh
+	movcc	yl, yl, lsl #1
+	movcc	ip, ip, lsl #1
+	bcc	1b
+
+#endif
+
+	@ The division loop for needed upper bit positions.
+ 	@ Break out early if dividend reaches 0.
+2:	cmp	xh, yl
+	orrcs	yh, yh, ip
+	subcss	xh, xh, yl
+	movnes	ip, ip, lsr #1
+	mov	yl, yl, lsr #1
+	bne	2b
+
+	@ See if we need to handle lower 32-bit result.
+3:	cmp	xh, #0
+	mov	yl, #0
+	cmpeq	xl, r4
+	movlo	xh, xl
+	movlo	pc, lr
+
+	@ The division loop for lower bit positions.
+	@ Here we shift remainer bits leftwards rather than moving the
+	@ divisor for comparisons, considering the carry-out bit as well.
+	mov	ip, #0x80000000
+4:	movs	xl, xl, lsl #1
+	adcs	xh, xh, xh
+	beq	6f
+	cmpcc	xh, r4
+5:	orrcs	yl, yl, ip
+	subcs	xh, xh, r4
+	movs	ip, ip, lsr #1
+	bne	4b
+	mov	pc, lr
+
+	@ The top part of remainder became zero.  If carry is set
+	@ (the 33th bit) this is a false positive so resume the loop.
+	@ Otherwise, if lower part is also null then we are done.
+6:	bcs	5b
+	cmp	xl, #0
+	moveq	pc, lr
+
+	@ We still have remainer bits in the low part.  Bring them up.
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	xh, xl			@ we know xh is zero here so...
+	add	xh, xh, #1
+	mov	xl, xl, lsl xh
+	mov	ip, ip, lsr xh
+
+#else
+
+7:	movs	xl, xl, lsl #1
+	mov	ip, ip, lsr #1
+	bcc	7b
+
+#endif
+
+	@ Current remainder is now 1.  It is worthless to compare with
+	@ divisor at this point since divisor can not be smaller than 3 here.
+	@ If possible, branch for another shift in the division loop.
+	@ If no bit position left then we are done.
+	movs	ip, ip, lsr #1
+	mov	xh, #1
+	bne	4b
+	mov	pc, lr
+
+8:	@ Division by a power of 2: determine what that divisor order is
+	@ then simply shift values around
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+	clz	ip, r4
+	rsb	ip, ip, #31
+
+#else
+
+	mov	yl, r4
+	cmp	r4, #(1 << 16)
+	mov	ip, #0
+	movhs	yl, yl, lsr #16
+	movhs	ip, #16
+
+	cmp	yl, #(1 << 8)
+	movhs	yl, yl, lsr #8
+	addhs	ip, ip, #8
+
+	cmp	yl, #(1 << 4)
+	movhs	yl, yl, lsr #4
+	addhs	ip, ip, #4
+
+	cmp	yl, #(1 << 2)
+	addhi	ip, ip, #3
+	addls	ip, ip, yl, lsr #1
+
+#endif
+
+	mov	yh, xh, lsr ip
+	mov	yl, xl, lsr ip
+	rsb	ip, ip, #32
+	orr	yl, yl, xh, lsl ip
+	mov	xh, xl, lsl ip
+	mov	xh, xh, lsr ip
+	mov	pc, lr
+
+	@ eq -> division by 1: obvious enough...
+9:	moveq	yl, xl
+	moveq	yh, xh
+	moveq	xh, #0
+	moveq	pc, lr
+
+	@ Division by 0:
+	str	lr, [sp, #-4]!
+	bl	__div0
+
+	@ as wrong as it could be...
+	mov	yl, #0
+	mov	yh, #0
+	mov	xh, #0
+	ldr	pc, [sp], #4
+

arch/arm/mach-clps711x/time.c

@@ -40,6 +40,7 @@ static unsigned long clps711x_gettimeoffset(void)
 
 void __init clps711x_setup_timer(void)
 {
+	struct timespec tv;
 	unsigned int syscon;
 
 	gettimeoffset = clps711x_gettimeoffset;
@@ -50,5 +51,7 @@ void __init clps711x_setup_timer(void)
 
 	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
 
-	xtime.tv_sec = clps_readl(RTCDR);
+	tv.tv_nsec = 0;
+	tv.tv_sec = clps_readl(RTCDR);
+	do_settimeofday(&tv);
 }

arch/arm/mach-integrator/integrator_ap.c

@@ -126,7 +126,7 @@ static void __init ap_init_irq(void)
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
 	for (i = 0; i < NR_IRQS; i++) {
-		if (((1 << i) && INTEGRATOR_SC_VALID_INT) != 0) {
+		if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) {
 			set_irq_chip(i, &sc_chip);
 			set_irq_handler(i, do_level_IRQ);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);

arch/arm/mm/cache-v3.S

@@ -32,14 +32,14 @@ ENTRY(v3_flush_kern_cache_all)
 	/* FALLTHROUGH */
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (may not be aligned)
  *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v3_flush_user_cache_range)
 	mov	ip, #0

arch/arm/mm/cache-v4.S

@@ -34,14 +34,14 @@ ENTRY(v4_flush_kern_cache_all)
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vma)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (may not be aligned)
  *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4_flush_user_cache_range)
 	mov	ip, #0

arch/arm/mm/cache-v4wb.S

@@ -72,14 +72,14 @@ __flush_whole_cache:
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (inclusive, page aligned)
  *	- end	- end address (exclusive, page aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4wb_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size

arch/arm/mm/cache-v4wt.S

@@ -64,14 +64,14 @@ __flush_whole_cache:
 	mov	pc, lr
 
 /*
- *	flush_user_cache_range(start, end, vm_flags)
+ *	flush_user_cache_range(start, end, flags)
  *
  *	Clean and invalidate a range of cache entries in the specified
  *	address space.
  *
  *	- start - start address (inclusive, page aligned)
  *	- end	- end address (exclusive, page aligned)
- *	- vma	- vma_area_struct describing address space
+ *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4wt_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size

drivers/acorn/char/i2c.c

@@ -280,13 +280,15 @@ static int ioc_client_reg(struct i2c_client *client)
 	    client->addr == 0x50) {
 		struct rtc_tm rtctm;
 		unsigned int year;
+		struct timespec tv;
 
 		rtc_client = client;
 		get_rtc_time(&rtctm, &year);
 
-		xtime.tv_nsec = rtctm.cs * 10000000;
-		xtime.tv_sec  = mktime(year, rtctm.mon, rtctm.mday,
+		tv.tv_nsec = rtctm.cs * 10000000;
+		tv.tv_sec  = mktime(year, rtctm.mon, rtctm.mday,
 				    rtctm.hours, rtctm.mins, rtctm.secs);
+		do_settimeofday(&tv);
 		set_rtc = k_set_rtc_time;
 	}
 

include/asm-arm/arch-ebsa285/time.h

@@ -243,6 +243,7 @@ void __init time_init(void)
 
 		if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
 		    CMOS_READ(RTC_REG_B) == reg_b) {
+			struct timespec tv;
 
 			/*
 			 * We have a RTC.  Check the battery
@@ -250,7 +251,9 @@ void __init time_init(void)
 			if ((reg_d & 0x80) == 0)
 				printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
 
-			xtime.tv_sec = get_isa_cmos_time();
+			tv.tv_nsec = 0;
+			tv.tv_sec = get_isa_cmos_time();
+			do_settimeofday(&tv);
 			set_rtc = set_isa_cmos_time;
 		} else
 			rtc_base = 0;

include/asm-arm/arch-pxa/time.h

@@ -33,7 +33,7 @@ static int pxa_set_rtc(void)
 /* IRQs are disabled before entering here from do_gettimeofday() */
 static unsigned long pxa_gettimeoffset (void)
 {
-	unsigned long ticks_to_match, elapsed, usec;
+	long ticks_to_match, elapsed, usec;
 
 	/* Get ticks before next timer match */
 	ticks_to_match = OSMR0 - OSCR;
@@ -41,6 +41,10 @@ static unsigned long pxa_gettimeoffset (void)
 	/* We need elapsed ticks since last match */
 	elapsed = LATCH - ticks_to_match;
 
+	/* don't get fooled by the workaround in pxa_timer_interrupt() */
+	if (elapsed <= 0)
+		return 0;
+
 	/* Now convert them to usec */
 	usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
 
@@ -59,6 +63,15 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 * IRQs are disabled inside the loop to ensure coherence between
 	 * lost_ticks (updated in do_timer()) and the match reg value, so we
 	 * can use do_gettimeofday() from interrupt handlers.
+	 *
+	 * HACK ALERT: it seems that the PXA timer regs aren't updated right
+	 * away in all cases when a write occurs.  We therefore compare with
+	 * 8 instead of 0 in the while() condition below to avoid missing a
+	 * match if OSCR has already reached the next OSMR value.
+	 * Experience has shown that up to 6 ticks are needed to work around
+	 * this problem, but let's use 8 to be conservative.  Note that this
+	 * affect things only when the timer IRQ has been delayed by nearly
+	 * exactly one tick period which should be a pretty rare event.
 	 */
 	do {
 		do_leds();
@@ -66,16 +79,22 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		do_timer(regs);
 		OSSR = OSSR_M0;  /* Clear match on timer 0 */
 		next_match = (OSMR0 += LATCH);
-	} while( (signed long)(next_match - OSCR) <= 0 );
+	} while( (signed long)(next_match - OSCR) <= 8 );
 
 	return IRQ_HANDLED;
 }
 
 void __init time_init(void)
 {
+	struct timespec tv;
+
 	gettimeoffset = pxa_gettimeoffset;
 	set_rtc = pxa_set_rtc;
-	xtime.tv_sec = pxa_get_rtc_time();
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = pxa_get_rtc_time();
+	do_settimeofday(&tv);
+
 	timer_irq.handler = pxa_timer_interrupt;
 	OSMR0 = 0;		/* set initial match at 0 */
 	OSSR = 0xf;		/* clear status on all timers */

include/asm-arm/arch-sa1100/time.h

@@ -92,9 +92,15 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 void __init time_init(void)
 {
+	struct timespec tv;
+
 	gettimeoffset = sa1100_gettimeoffset;
 	set_rtc = sa1100_set_rtc;
-	xtime.tv_sec = sa1100_get_rtc_time();
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = sa1100_get_rtc_time();
+	do_settimeofday(&tv);
+
 	timer_irq.handler = sa1100_timer_interrupt;
 	OSMR0 = 0;		/* set initial match at 0 */
 	OSSR = 0xf;		/* clear status on all timers */

include/asm-arm/arch-shark/time.h

@@ -34,8 +34,6 @@ void __init time_init(void)
 	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
 	outb(HZ_TIME >> 8, 0x40);
 
-	xtime.tv_sec = 0;
-
 	timer_irq.handler = timer_interrupt;
 	setup_irq(IRQ_TIMER, &timer_irq);
 }

include/asm-arm/div64.h

 #ifndef __ASM_ARM_DIV64
 #define __ASM_ARM_DIV64
 
-/* We're not 64-bit, but... */
+/*
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * In other words, a 64-bit dividend with a 32-bit divisor producing
+ * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
+ * we call a special __do_div64 helper with completely non standard
+ * calling convention for arguments and results (beware).
+ */
+
+#ifdef __ARMEB__
+#define __xh "r0"
+#define __xl "r1"
+#else
+#define __xl "r0"
+#define __xh "r1"
+#endif
+
 #define do_div(n,base)						\
 ({								\
-	register int __res asm("r2") = base;			\
+	register unsigned int __base      asm("r4") = base;	\
 	register unsigned long long __n   asm("r0") = n;	\
-	asm("bl do_div64"					\
-		: "=r" (__n), "=r" (__res)			\
-		: "0" (__n), "1" (__res)			\
-		: "r3", "ip", "lr", "cc");			\
-	n = __n;						\
-	__res;							\
+	register unsigned long long __res asm("r2");		\
+	register unsigned int __rem       asm(__xh);		\
+	asm("bl	__do_div64"					\
+		: "=r" (__rem), "=r" (__res)			\
+		: "r" (__n), "r" (__base)			\
+		: "ip", "lr", "cc");				\
+	n = __res;						\
+	__rem;							\
 })
 
 #endif
-

include/asm-arm/kmap_types.h

@@ -5,8 +5,21 @@
  * This is the "bare minimum".  AIO seems to require this.
  */
 enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_PTE2,
 	KM_IRQ0,
-	KM_USER1
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
 };
 
 #endif

include/asm-arm/unaligned.h

@@ -159,7 +159,7 @@ static inline void __put_unaligned_8_be(const unsigned long long __v, register _
 		(void) 0;					\
 	})
 
-#define put_unaligned_be(val,ptr)					\
+#define __put_unaligned_be(val,ptr)					\
 	({							\
 		switch (sizeof(*(ptr))) {			\
 		case 1:						\

include/asm-arm/unistd.h

@@ -282,6 +282,20 @@
 					/* 254 for set_thread_area */
 					/* 255 for get_thread_area */
 					/* 256 for set_tid_address */
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_fadvise64_64		(__NR_SYSCALL_BASE+270)
 
 /*
  * The following SWIs are ARM private.

sound/oss/vidc.c

@@ -41,6 +41,7 @@
 #endif
 
 #define VIDC_SOUND_CLOCK	(250000)
+#define VIDC_SOUND_CLOCK_EXT	(176400)
 
 /*
  * When using SERIAL SOUND mode (external DAC), the number of physical
@@ -81,17 +82,9 @@ static unsigned char	vidc_level_r[SOUND_MIXER_NRDEVICES] = {
 static unsigned int	vidc_audio_volume_l;	/* left PCM vol, 0 - 65536 */
 static unsigned int	vidc_audio_volume_r;	/* right PCM vol, 0 - 65536 */
 
-static void	(*old_mksound)(unsigned int hz, unsigned int ticks);
-extern void	(*kd_mksound)(unsigned int hz, unsigned int ticks);
 extern void	vidc_update_filler(int bits, int channels);
 extern int	softoss_dev;
 
-static void
-vidc_mksound(unsigned int hz, unsigned int ticks)
-{
-//	printk("BEEP - %d %d!\n", hz, ticks);
-}
-
 static void
 vidc_mixer_set(int mdev, unsigned int level)
 {
@@ -193,28 +186,50 @@ static unsigned int vidc_audio_set_format(int dev, unsigned int fmt)
 	return vidc_audio_format;
 }
 
+#define my_abs(i) ((i)<0 ? -(i) : (i))
+
 static int vidc_audio_set_speed(int dev, int rate)
 {
 	if (rate) {
-		unsigned int hwctrl, hwrate;
+		unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext;
+		unsigned int diff_int, diff_ext;
 		unsigned int newsize, new2size;
 
-		/*
-		 * If we have selected 44.1kHz, use the DAC clock.
-		 */
-		if (0 && rate == 44100) {
-			hwctrl = 0x00000002;
-			hwrate = 3;
-		} else {
 		hwctrl = 0x00000003;
 
+		/* Using internal clock */
 		hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1;
 		if (hwrate < 3)
 			hwrate = 3;
 		if (hwrate > 255)
 			hwrate = 255;
 
-			rate = VIDC_SOUND_CLOCK / hwrate;
+		/* Using exernal clock */
+		hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1;
+		if (hwrate_ext < 3)
+			hwrate_ext = 3;
+		if (hwrate_ext > 255)
+			hwrate_ext = 255;
+
+		rate_int = VIDC_SOUND_CLOCK / hwrate;
+		rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext;
+
+		/* Chose between external and internal clock */
+		diff_int = my_abs(rate_ext-rate);
+		diff_ext = my_abs(rate_int-rate);
+		if (diff_ext < diff_int) {
+			/*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/
+			hwrate=hwrate_ext;
+			hwctrl=0x00000002;
+			/* Allow roughly 0.4% tolerance */
+			if (diff_ext > (rate/256))
+				rate=rate_ext;
+		} else {
+			/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
+			hwctrl=0x00000003;
+			/* Allow rougly 0.4% tolerance */
+			if (diff_int > (rate/256))
+				rate=rate_int;
 		}
 
 		vidc_writel(0xb0000000 | (hwrate - 2));
@@ -233,6 +248,7 @@ static int vidc_audio_set_speed(int dev, int rate)
 				newsize, new2size);
 			new2size = 4096;
 		}
+		/*printk("VIDC: dma size %d\n", new2size);*/
 		dma_bufsize = new2size;
 		vidc_audio_rate = rate;
 	}
@@ -471,8 +487,6 @@ static void __init attach_vidc(struct address_info *hw_config)
 		printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq);
 		goto irq_failed;
 	}
-	old_mksound = kd_mksound;
-	kd_mksound = vidc_mksound;
 	vidc_adev = adev;
 	vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
 
@@ -510,9 +524,6 @@ static void __exit unload_vidc(struct address_info *hw_config)
 
 	vidc_adev = -1;
 
-	if (old_mksound)
-		kd_mksound = old_mksound;
-
 	free_irq(hw_config->irq, &dma_start);
 	sound_free_dma(hw_config->dma);