Commit 42d4ebb4 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog update from Wim Van Sebroeck:

 - New driver for Broadcom 7038 Set-Top Box
 - imx2_wdt: Use register definition in regmap_write()
 - intel-mid: add Magic Closure flag
 - watchdog framework improvements:
      - Use device tree alias for naming watchdogs
      - propagate ping error code to the user space
      - Always evaluate new timeout against min_timeout
      - Use single variable name for struct watchdog_device
 - include clean-ups

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: include: add units for timeout values in kerneldoc
  watchdog: include: fix some typos
  watchdog: core: propagate ping error code to the user space
  watchdog: watchdog_dev: Use single variable name for struct watchdog_device
  watchdog: Always evaluate new timeout against min_timeout
  watchdog: intel-mid: add Magic Closure flag
  watchdog: imx2_wdt: Use register definition in regmap_write()
  watchdog: watchdog_dev: Use device tree alias for naming watchdogs
  watchdog: Watchdog driver for Broadcom Set-Top Box
  watchdog: bcm7038: add device tree binding documentation
parents 6aabef68 760d2800
BCM7038 Watchdog timer
Required properties:
- compatible : should be "brcm,bcm7038-wdt"
- reg : Specifies base physical address and size of the registers.
Optional properties:
- clocks: The clock running the watchdog. If no clock is found the
driver will default to 27000000 Hz.
Example:
watchdog@f040a7e8 {
compatible = "brcm,bcm7038-wdt";
clocks = <&upg_fixed>;
reg = <0xf040a7e8 0x16>;
};
......@@ -1313,6 +1313,14 @@ config BCM_KONA_WDT_DEBUG
If in doubt, say 'N'.
config BCM7038_WDT
tristate "BCM7038 Watchdog"
select WATCHDOG_CORE
help
Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
Say 'Y or 'M' here to enable the driver.
config IMGPDC_WDT
tristate "Imagination Technologies PDC Watchdog Timer"
depends on HAS_IOMEM
......
......@@ -68,6 +68,7 @@ obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
......
/*
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/watchdog.h>
#define WDT_START_1 0xff00
#define WDT_START_2 0x00ff
#define WDT_STOP_1 0xee00
#define WDT_STOP_2 0x00ee
#define WDT_TIMEOUT_REG 0x0
#define WDT_CMD_REG 0x4
#define WDT_MIN_TIMEOUT 1 /* seconds */
#define WDT_DEFAULT_TIMEOUT 30 /* seconds */
#define WDT_DEFAULT_RATE 27000000
struct bcm7038_watchdog {
void __iomem *base;
struct watchdog_device wdd;
u32 rate;
struct clk *clk;
};
static bool nowayout = WATCHDOG_NOWAYOUT;
static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
{
struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
u32 timeout;
timeout = wdt->rate * wdog->timeout;
writel(timeout, wdt->base + WDT_TIMEOUT_REG);
}
static int bcm7038_wdt_ping(struct watchdog_device *wdog)
{
struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
writel(WDT_START_1, wdt->base + WDT_CMD_REG);
writel(WDT_START_2, wdt->base + WDT_CMD_REG);
return 0;
}
static int bcm7038_wdt_start(struct watchdog_device *wdog)
{
bcm7038_wdt_set_timeout_reg(wdog);
bcm7038_wdt_ping(wdog);
return 0;
}
static int bcm7038_wdt_stop(struct watchdog_device *wdog)
{
struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
return 0;
}
static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
unsigned int t)
{
/* Can't modify timeout value if watchdog timer is running */
bcm7038_wdt_stop(wdog);
wdog->timeout = t;
bcm7038_wdt_start(wdog);
return 0;
}
static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
{
struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
u32 time_left;
time_left = readl(wdt->base + WDT_CMD_REG);
return time_left / wdt->rate;
}
static struct watchdog_info bcm7038_wdt_info = {
.identity = "Broadcom BCM7038 Watchdog Timer",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE
};
static struct watchdog_ops bcm7038_wdt_ops = {
.owner = THIS_MODULE,
.start = bcm7038_wdt_start,
.stop = bcm7038_wdt_stop,
.set_timeout = bcm7038_wdt_set_timeout,
.get_timeleft = bcm7038_wdt_get_timeleft,
};
static int bcm7038_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bcm7038_watchdog *wdt;
struct resource *res;
int err;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
platform_set_drvdata(pdev, wdt);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt->base = devm_ioremap_resource(dev, res);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
wdt->clk = devm_clk_get(dev, NULL);
/* If unable to get clock, use default frequency */
if (!IS_ERR(wdt->clk)) {
clk_prepare_enable(wdt->clk);
wdt->rate = clk_get_rate(wdt->clk);
/* Prevent divide-by-zero exception */
if (!wdt->rate)
wdt->rate = WDT_DEFAULT_RATE;
} else {
wdt->rate = WDT_DEFAULT_RATE;
wdt->clk = NULL;
}
wdt->wdd.info = &bcm7038_wdt_info;
wdt->wdd.ops = &bcm7038_wdt_ops;
wdt->wdd.min_timeout = WDT_MIN_TIMEOUT;
wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
wdt->wdd.max_timeout = 0xffffffff / wdt->rate;
wdt->wdd.parent = dev;
watchdog_set_drvdata(&wdt->wdd, wdt);
err = watchdog_register_device(&wdt->wdd);
if (err) {
dev_err(dev, "Failed to register watchdog device\n");
clk_disable_unprepare(wdt->clk);
return err;
}
dev_info(dev, "Registered BCM7038 Watchdog\n");
return 0;
}
static int bcm7038_wdt_remove(struct platform_device *pdev)
{
struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
if (!nowayout)
bcm7038_wdt_stop(&wdt->wdd);
watchdog_unregister_device(&wdt->wdd);
clk_disable_unprepare(wdt->clk);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int bcm7038_wdt_suspend(struct device *dev)
{
struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
if (watchdog_active(&wdt->wdd))
return bcm7038_wdt_stop(&wdt->wdd);
return 0;
}
static int bcm7038_wdt_resume(struct device *dev)
{
struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
if (watchdog_active(&wdt->wdd))
return bcm7038_wdt_start(&wdt->wdd);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
bcm7038_wdt_resume);
static void bcm7038_wdt_shutdown(struct platform_device *pdev)
{
struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
if (watchdog_active(&wdt->wdd))
bcm7038_wdt_stop(&wdt->wdd);
}
static const struct of_device_id bcm7038_wdt_match[] = {
{ .compatible = "brcm,bcm7038-wdt" },
{},
};
static struct platform_driver bcm7038_wdt_driver = {
.probe = bcm7038_wdt_probe,
.remove = bcm7038_wdt_remove,
.shutdown = bcm7038_wdt_shutdown,
.driver = {
.name = "bcm7038-wdt",
.of_match_table = bcm7038_wdt_match,
.pm = &bcm7038_wdt_pm_ops,
}
};
module_platform_driver(bcm7038_wdt_driver);
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
MODULE_AUTHOR("Justin Chen");
......@@ -91,7 +91,7 @@ static int imx2_restart_handler(struct notifier_block *this, unsigned long mode,
struct imx2_wdt_device,
restart_handler);
/* Assert SRS signal */
regmap_write(wdev->regmap, 0, wcr_enable);
regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
/*
* Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
* written twice), we add another two writes to ensure there must be at
......@@ -99,8 +99,8 @@ static int imx2_restart_handler(struct notifier_block *this, unsigned long mode,
* the target check here, since the writes shouldn't be a huge burden
* for other platforms.
*/
regmap_write(wdev->regmap, 0, wcr_enable);
regmap_write(wdev->regmap, 0, wcr_enable);
regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
/* wait for reset to assert... */
mdelay(500);
......
......@@ -101,7 +101,7 @@ static irqreturn_t mid_wdt_irq(int irq, void *dev_id)
static const struct watchdog_info mid_wdt_info = {
.identity = "Intel MID SCU watchdog",
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
};
static const struct watchdog_ops mid_wdt_ops = {
......
......@@ -139,7 +139,7 @@ EXPORT_SYMBOL_GPL(watchdog_init_timeout);
static int __watchdog_register_device(struct watchdog_device *wdd)
{
int ret, id, devno;
int ret, id = -1, devno;
if (wdd == NULL || wdd->info == NULL || wdd->ops == NULL)
return -EINVAL;
......@@ -157,7 +157,18 @@ static int __watchdog_register_device(struct watchdog_device *wdd)
*/
mutex_init(&wdd->lock);
id = ida_simple_get(&watchdog_ida, 0, MAX_DOGS, GFP_KERNEL);
/* Use alias for watchdog id if possible */
if (wdd->parent) {
ret = of_alias_get_id(wdd->parent->of_node, "watchdog");
if (ret >= 0)
id = ida_simple_get(&watchdog_ida, ret,
ret + 1, GFP_KERNEL);
}
if (id < 0)
id = ida_simple_get(&watchdog_ida, 0, MAX_DOGS, GFP_KERNEL);
if (id < 0)
return id;
wdd->id = id;
......
......@@ -51,7 +51,7 @@ static struct watchdog_device *old_wdd;
/*
* watchdog_ping: ping the watchdog.
* @wddev: the watchdog device to ping
* @wdd: the watchdog device to ping
*
* If the watchdog has no own ping operation then it needs to be
* restarted via the start operation. This wrapper function does
......@@ -59,65 +59,65 @@ static struct watchdog_device *old_wdd;
* We only ping when the watchdog device is running.
*/
static int watchdog_ping(struct watchdog_device *wddev)
static int watchdog_ping(struct watchdog_device *wdd)
{
int err = 0;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_ping;
}
if (!watchdog_active(wddev))
if (!watchdog_active(wdd))
goto out_ping;
if (wddev->ops->ping)
err = wddev->ops->ping(wddev); /* ping the watchdog */
if (wdd->ops->ping)
err = wdd->ops->ping(wdd); /* ping the watchdog */
else
err = wddev->ops->start(wddev); /* restart watchdog */
err = wdd->ops->start(wdd); /* restart watchdog */
out_ping:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_start: wrapper to start the watchdog.
* @wddev: the watchdog device to start
* @wdd: the watchdog device to start
*
* Start the watchdog if it is not active and mark it active.
* This function returns zero on success or a negative errno code for
* failure.
*/
static int watchdog_start(struct watchdog_device *wddev)
static int watchdog_start(struct watchdog_device *wdd)
{
int err = 0;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_start;
}
if (watchdog_active(wddev))
if (watchdog_active(wdd))
goto out_start;
err = wddev->ops->start(wddev);
err = wdd->ops->start(wdd);
if (err == 0)
set_bit(WDOG_ACTIVE, &wddev->status);
set_bit(WDOG_ACTIVE, &wdd->status);
out_start:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_stop: wrapper to stop the watchdog.
* @wddev: the watchdog device to stop
* @wdd: the watchdog device to stop
*
* Stop the watchdog if it is still active and unmark it active.
* This function returns zero on success or a negative errno code for
......@@ -125,155 +125,154 @@ static int watchdog_start(struct watchdog_device *wddev)
* If the 'nowayout' feature was set, the watchdog cannot be stopped.
*/
static int watchdog_stop(struct watchdog_device *wddev)
static int watchdog_stop(struct watchdog_device *wdd)
{
int err = 0;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_stop;
}
if (!watchdog_active(wddev))
if (!watchdog_active(wdd))
goto out_stop;
if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) {
dev_info(wddev->dev, "nowayout prevents watchdog being stopped!\n");
if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
dev_info(wdd->dev, "nowayout prevents watchdog being stopped!\n");
err = -EBUSY;
goto out_stop;
}
err = wddev->ops->stop(wddev);
err = wdd->ops->stop(wdd);
if (err == 0)
clear_bit(WDOG_ACTIVE, &wddev->status);
clear_bit(WDOG_ACTIVE, &wdd->status);
out_stop:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_get_status: wrapper to get the watchdog status
* @wddev: the watchdog device to get the status from
* @wdd: the watchdog device to get the status from
* @status: the status of the watchdog device
*
* Get the watchdog's status flags.
*/
static int watchdog_get_status(struct watchdog_device *wddev,
static int watchdog_get_status(struct watchdog_device *wdd,
unsigned int *status)
{
int err = 0;
*status = 0;
if (!wddev->ops->status)
if (!wdd->ops->status)
return -EOPNOTSUPP;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_status;
}
*status = wddev->ops->status(wddev);
*status = wdd->ops->status(wdd);
out_status:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_set_timeout: set the watchdog timer timeout
* @wddev: the watchdog device to set the timeout for
* @wdd: the watchdog device to set the timeout for
* @timeout: timeout to set in seconds
*/
static int watchdog_set_timeout(struct watchdog_device *wddev,
static int watchdog_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
int err;
if ((wddev->ops->set_timeout == NULL) ||
!(wddev->info->options & WDIOF_SETTIMEOUT))
if (!wdd->ops->set_timeout || !(wdd->info->options & WDIOF_SETTIMEOUT))
return -EOPNOTSUPP;
if (watchdog_timeout_invalid(wddev, timeout))
if (watchdog_timeout_invalid(wdd, timeout))
return -EINVAL;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_timeout;
}
err = wddev->ops->set_timeout(wddev, timeout);
err = wdd->ops->set_timeout(wdd, timeout);
out_timeout:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_get_timeleft: wrapper to get the time left before a reboot
* @wddev: the watchdog device to get the remaining time from
* @wdd: the watchdog device to get the remaining time from
* @timeleft: the time that's left
*
* Get the time before a watchdog will reboot (if not pinged).
*/
static int watchdog_get_timeleft(struct watchdog_device *wddev,
static int watchdog_get_timeleft(struct watchdog_device *wdd,
unsigned int *timeleft)
{
int err = 0;
*timeleft = 0;
if (!wddev->ops->get_timeleft)
if (!wdd->ops->get_timeleft)
return -EOPNOTSUPP;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_timeleft;
}
*timeleft = wddev->ops->get_timeleft(wddev);
*timeleft = wdd->ops->get_timeleft(wdd);
out_timeleft:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
/*
* watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
* @wddev: the watchdog device to do the ioctl on
* @wdd: the watchdog device to do the ioctl on
* @cmd: watchdog command
* @arg: argument pointer
*/
static int watchdog_ioctl_op(struct watchdog_device *wddev, unsigned int cmd,
static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
unsigned long arg)
{
int err;
if (!wddev->ops->ioctl)
if (!wdd->ops->ioctl)
return -ENOIOCTLCMD;
mutex_lock(&wddev->lock);
mutex_lock(&wdd->lock);
if (test_bit(WDOG_UNREGISTERED, &wddev->status)) {
if (test_bit(WDOG_UNREGISTERED, &wdd->status)) {
err = -ENODEV;
goto out_ioctl;
}
err = wddev->ops->ioctl(wddev, cmd, arg);
err = wdd->ops->ioctl(wdd, cmd, arg);
out_ioctl:
mutex_unlock(&wddev->lock);
mutex_unlock(&wdd->lock);
return err;
}
......@@ -295,6 +294,7 @@ static ssize_t watchdog_write(struct file *file, const char __user *data,
struct watchdog_device *wdd = file->private_data;
size_t i;
char c;
int err;
if (len == 0)
return 0;
......@@ -314,7 +314,9 @@ static ssize_t watchdog_write(struct file *file, const char __user *data,
}
/* someone wrote to us, so we send the watchdog a keepalive ping */
watchdog_ping(wdd);
err = watchdog_ping(wdd);
if (err < 0)
return err;
return len;
}
......@@ -370,8 +372,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd,
case WDIOC_KEEPALIVE:
if (!(wdd->info->options & WDIOF_KEEPALIVEPING))
return -EOPNOTSUPP;
watchdog_ping(wdd);
return 0;
return watchdog_ping(wdd);
case WDIOC_SETTIMEOUT:
if (get_user(val, p))
return -EFAULT;
......@@ -381,7 +382,9 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd,
/* If the watchdog is active then we send a keepalive ping
* to make sure that the watchdog keep's running (and if
* possible that it takes the new timeout) */
watchdog_ping(wdd);
err = watchdog_ping(wdd);
if (err < 0)
return err;
/* Fall */
case WDIOC_GETTIMEOUT:
/* timeout == 0 means that we don't know the timeout */
......@@ -513,43 +516,43 @@ static struct miscdevice watchdog_miscdev = {
/*
* watchdog_dev_register: register a watchdog device
* @watchdog: watchdog device
* @wdd: watchdog device
*
* Register a watchdog device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
int watchdog_dev_register(struct watchdog_device *watchdog)
int watchdog_dev_register(struct watchdog_device *wdd)
{
int err, devno;
if (watchdog->id == 0) {
old_wdd = watchdog;
watchdog_miscdev.parent = watchdog->parent;
if (wdd->id == 0) {
old_wdd = wdd;
watchdog_miscdev.parent = wdd->parent;
err = misc_register(&watchdog_miscdev);
if (err != 0) {
pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
watchdog->info->identity, WATCHDOG_MINOR, err);
wdd->info->identity, WATCHDOG_MINOR, err);
if (err == -EBUSY)
pr_err("%s: a legacy watchdog module is probably present.\n",
watchdog->info->identity);
wdd->info->identity);
old_wdd = NULL;
return err;
}
}
/* Fill in the data structures */
devno = MKDEV(MAJOR(watchdog_devt), watchdog->id);
cdev_init(&watchdog->cdev, &watchdog_fops);
watchdog->cdev.owner = watchdog->ops->owner;
devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
cdev_init(&wdd->cdev, &watchdog_fops);
wdd->cdev.owner = wdd->ops->owner;
/* Add the device */
err = cdev_add(&watchdog->cdev, devno, 1);
err = cdev_add(&wdd->cdev, devno, 1);
if (err) {
pr_err("watchdog%d unable to add device %d:%d\n",
watchdog->id, MAJOR(watchdog_devt), watchdog->id);
if (watchdog->id == 0) {
wdd->id, MAJOR(watchdog_devt), wdd->id);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wdd = NULL;
}
......@@ -564,14 +567,14 @@ int watchdog_dev_register(struct watchdog_device *watchdog)
* Unregister the watchdog and if needed the legacy /dev/watchdog device.
*/
int watchdog_dev_unregister(struct watchdog_device *watchdog)
int watchdog_dev_unregister(struct watchdog_device *wdd)
{
mutex_lock(&watchdog->lock);
set_bit(WDOG_UNREGISTERED, &watchdog->status);
mutex_unlock(&watchdog->lock);
mutex_lock(&wdd->lock);
set_bit(WDOG_UNREGISTERED, &wdd->status);
mutex_unlock(&wdd->lock);
cdev_del(&watchdog->cdev);
if (watchdog->id == 0) {
cdev_del(&wdd->cdev);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wdd = NULL;
}
......
......@@ -24,8 +24,8 @@ struct watchdog_device;
* @stop: The routine for stopping the watchdog device.
* @ping: The routine that sends a keepalive ping to the watchdog device.
* @status: The routine that shows the status of the watchdog device.
* @set_timeout:The routine for setting the watchdog devices timeout value.
* @get_timeleft:The routine that get's the time that's left before a reset.
* @set_timeout:The routine for setting the watchdog devices timeout value (in seconds).
* @get_timeleft:The routine that gets the time left before a reset (in seconds).
* @ref: The ref operation for dyn. allocated watchdog_device structs
* @unref: The unref operation for dyn. allocated watchdog_device structs
* @ioctl: The routines that handles extra ioctl calls.
......@@ -33,7 +33,7 @@ struct watchdog_device;
* The watchdog_ops structure contains a list of low-level operations
* that control a watchdog device. It also contains the module that owns
* these operations. The start and stop function are mandatory, all other
* functions are optonal.
* functions are optional.
*/
struct watchdog_ops {
struct module *owner;
......@@ -59,9 +59,9 @@ struct watchdog_ops {
* @info: Pointer to a watchdog_info structure.
* @ops: Pointer to the list of watchdog operations.
* @bootstatus: Status of the watchdog device at boot.
* @timeout: The watchdog devices timeout value.
* @min_timeout:The watchdog devices minimum timeout value.
* @max_timeout:The watchdog devices maximum timeout value.
* @timeout: The watchdog devices timeout value (in seconds).
* @min_timeout:The watchdog devices minimum timeout value (in seconds).
* @max_timeout:The watchdog devices maximum timeout value (in seconds).
* @driver-data:Pointer to the drivers private data.
* @lock: Lock for watchdog core internal use only.
* @status: Field that contains the devices internal status bits.
......@@ -119,8 +119,15 @@ static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool noway
/* Use the following function to check if a timeout value is invalid */
static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigned int t)
{
return ((wdd->max_timeout != 0) &&
(t < wdd->min_timeout || t > wdd->max_timeout));
/*
* The timeout is invalid if
* - the requested value is smaller than the configured minimum timeout,
* or
* - a maximum timeout is configured, and the requested value is larger
* than the maximum timeout.
*/
return t < wdd->min_timeout ||
(wdd->max_timeout && t > wdd->max_timeout);
}
/* Use the following functions to manipulate watchdog driver specific data */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment