Commit 42fefc86 authored by Allen Hubbe's avatar Allen Hubbe Committed by Jon Mason

NTB: Add parameters for Intel SNB B2B addresses

Add module parameters for the addresses to be used in B2B topology.
Signed-off-by: default avatarAllen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: default avatarJon Mason <jdmason@kudzu.us>
parent 2849b5d7
......@@ -56,3 +56,13 @@ Module Parameters:
* b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
the memory window is large enough, still allow the client to use the
second half of the memory window for address translation to the peer.
* snb\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use this
64 bit address on the bus between the NTB devices for the window at
BAR2, on the upstream side of the link.
* snb\_b2b\_usd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_usd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_usd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_dsd\_bar2\_addr64 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_dsd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_dsd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
* snb\_b2b\_dsd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.
......@@ -72,20 +72,6 @@ MODULE_AUTHOR("Intel Corporation");
#define bar0_off(base, bar) ((base) + ((bar) << 2))
#define bar2_off(base, bar) bar0_off(base, (bar) - 2)
static int b2b_mw_idx = -1;
module_param(b2b_mw_idx, int, 0644);
MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb. A "
"value of zero or positive starts from first mw idx, and a "
"negative value starts from last mw idx. Both sides MUST "
"set the same value here!");
static unsigned int b2b_mw_share;
module_param(b2b_mw_share, uint, 0644);
MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
"ntb so that the peer ntb only occupies the first half of "
"the mw, so the second half can still be used as a mw. Both "
"sides MUST set the same value here!");
static const struct intel_ntb_reg bwd_reg;
static const struct intel_ntb_alt_reg bwd_pri_reg;
static const struct intel_ntb_alt_reg bwd_sec_reg;
......@@ -98,14 +84,67 @@ static const struct intel_ntb_alt_reg snb_sec_reg;
static const struct intel_ntb_alt_reg snb_b2b_reg;
static const struct intel_ntb_xlat_reg snb_pri_xlat;
static const struct intel_ntb_xlat_reg snb_sec_xlat;
static const struct intel_b2b_addr snb_b2b_usd_addr;
static const struct intel_b2b_addr snb_b2b_dsd_addr;
static struct intel_b2b_addr snb_b2b_usd_addr;
static struct intel_b2b_addr snb_b2b_dsd_addr;
static const struct ntb_dev_ops intel_ntb_ops;
static const struct file_operations intel_ntb_debugfs_info;
static struct dentry *debugfs_dir;
static int b2b_mw_idx = -1;
module_param(b2b_mw_idx, int, 0644);
MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb. A "
"value of zero or positive starts from first mw idx, and a "
"negative value starts from last mw idx. Both sides MUST "
"set the same value here!");
static unsigned int b2b_mw_share;
module_param(b2b_mw_share, uint, 0644);
MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
"ntb so that the peer ntb only occupies the first half of "
"the mw, so the second half can still be used as a mw. Both "
"sides MUST set the same value here!");
module_param_named(snb_b2b_usd_bar2_addr64,
snb_b2b_usd_addr.bar2_addr64, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
"SNB B2B USD BAR 2 64-bit address");
module_param_named(snb_b2b_usd_bar4_addr64,
snb_b2b_usd_addr.bar4_addr64, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
"SNB B2B USD BAR 4 64-bit address");
module_param_named(snb_b2b_usd_bar4_addr32,
snb_b2b_usd_addr.bar4_addr32, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
"SNB B2B USD split-BAR 4 32-bit address");
module_param_named(snb_b2b_usd_bar5_addr32,
snb_b2b_usd_addr.bar5_addr32, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
"SNB B2B USD split-BAR 5 32-bit address");
module_param_named(snb_b2b_dsd_bar2_addr64,
snb_b2b_dsd_addr.bar2_addr64, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
"SNB B2B DSD BAR 2 64-bit address");
module_param_named(snb_b2b_dsd_bar4_addr64,
snb_b2b_dsd_addr.bar4_addr64, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
"SNB B2B DSD BAR 4 64-bit address");
module_param_named(snb_b2b_dsd_bar4_addr32,
snb_b2b_dsd_addr.bar4_addr32, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
"SNB B2B DSD split-BAR 4 32-bit address");
module_param_named(snb_b2b_dsd_bar5_addr32,
snb_b2b_dsd_addr.bar5_addr32, ullong, 0644);
MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
"SNB B2B DSD split-BAR 5 32-bit address");
#ifndef ioread64
#ifdef readq
#define ioread64 readq
......@@ -2073,14 +2112,14 @@ static const struct intel_ntb_xlat_reg snb_sec_xlat = {
.bar2_xlat = SNB_SBAR23XLAT_OFFSET,
};
static const struct intel_b2b_addr snb_b2b_usd_addr = {
static struct intel_b2b_addr snb_b2b_usd_addr = {
.bar2_addr64 = SNB_B2B_BAR2_USD_ADDR64,
.bar4_addr64 = SNB_B2B_BAR4_USD_ADDR64,
.bar4_addr32 = SNB_B2B_BAR4_USD_ADDR32,
.bar5_addr32 = SNB_B2B_BAR5_USD_ADDR32,
};
static const struct intel_b2b_addr snb_b2b_dsd_addr = {
static struct intel_b2b_addr snb_b2b_dsd_addr = {
.bar2_addr64 = SNB_B2B_BAR2_DSD_ADDR64,
.bar4_addr64 = SNB_B2B_BAR4_DSD_ADDR64,
.bar4_addr32 = SNB_B2B_BAR4_DSD_ADDR32,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment