Commit 433bcf67 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

 - switch xtensa arch to the generic noncoherent direct mapping
   operations

 - add support for DMA_ATTR_NO_KERNEL_MAPPING attribute

 - clean up users of platform/hardware.h in generic Xtensa code

 - fix assembly cache maintenance code for long cache lines

 - rework noMMU cache attributes initialization

 - add big-endian HiFi2 test_kc705_be CPU variant

* tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add test_kc705_be variant
  xtensa: clean up boot-elf/bootstrap.S
  xtensa: make bootparam parsing optional
  xtensa: drop variant IRQ support
  xtensa: drop unneeded platform/hardware.h headers
  xtensa: move PLATFORM_NR_IRQS to Kconfig
  xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START
  xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE
  xtensa: rework noMMU cache attributes initialization
  xtensa: increase ranges in ___invalidate_{i,d}cache_all
  xtensa: limit offsets in __loop_cache_{all,page}
  xtensa: platform-specific handling of coherent memory
  xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute
  xtensa: use generic dma_noncoherent_ops
parents b3721153 35d231db
...@@ -4,12 +4,15 @@ config ZONE_DMA ...@@ -4,12 +4,15 @@ config ZONE_DMA
config XTENSA config XTENSA
def_bool y def_bool y
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_NO_COHERENT_DMA_MMAP if !MMU select ARCH_NO_COHERENT_DMA_MMAP if !MMU
select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IPC_PARSE_VERSION
select BUILDTIME_EXTABLE_SORT select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS select CLONE_BACKWARDS
select COMMON_CLK select COMMON_CLK
select DMA_NONCOHERENT_OPS
select GENERIC_ATOMIC64 select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW
...@@ -72,9 +75,6 @@ config TRACE_IRQFLAGS_SUPPORT ...@@ -72,9 +75,6 @@ config TRACE_IRQFLAGS_SUPPORT
config MMU config MMU
def_bool n def_bool n
config VARIANT_IRQ_SWITCH
def_bool n
config HAVE_XTENSA_GPIO32 config HAVE_XTENSA_GPIO32
def_bool n def_bool n
...@@ -244,6 +244,23 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX ...@@ -244,6 +244,23 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
If in doubt, say Y. If in doubt, say Y.
config MEMMAP_CACHEATTR
hex "Cache attributes for the memory address space"
depends on !MMU
default 0x22222222
help
These cache attributes are set up for noMMU systems. Each hex digit
specifies cache attributes for the corresponding 512MB memory
region: bits 0..3 -- for addresses 0x00000000..0x1fffffff,
bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on.
Cache attribute values are specific for the MMU type, so e.g.
for region protection MMUs: 2 is cache bypass, 4 is WB cached,
1 is WT cached, f is illegal. For ful MMU: bit 0 makes it executable,
bit 1 makes it writable, bits 2..3 meaning is 0: cache bypass,
1: WB cache, 2: WT cache, 3: special (c and e are illegal, f is
reserved).
config KSEG_PADDR config KSEG_PADDR
hex "Physical address of the KSEG mapping" hex "Physical address of the KSEG mapping"
depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
...@@ -413,6 +430,10 @@ config XTENSA_PLATFORM_XTFPGA ...@@ -413,6 +430,10 @@ config XTENSA_PLATFORM_XTFPGA
endchoice endchoice
config PLATFORM_NR_IRQS
int
default 3 if XTENSA_PLATFORM_XT2000
default 0
config XTENSA_CPU_CLOCK config XTENSA_CPU_CLOCK
int "CPU clock rate [MHz]" int "CPU clock rate [MHz]"
...@@ -450,6 +471,15 @@ config BUILTIN_DTB ...@@ -450,6 +471,15 @@ config BUILTIN_DTB
string "DTB to build into the kernel image" string "DTB to build into the kernel image"
depends on OF depends on OF
config PARSE_BOOTPARAM
bool "Parse bootparam block"
default y
help
Parse parameters passed to the kernel from the bootloader. It may
be disabled if the kernel is known to run without the bootloader.
If unsure, say Y.
config BLK_DEV_SIMDISK config BLK_DEV_SIMDISK
tristate "Host file-based simulated block device support" tristate "Host file-based simulated block device support"
default n default n
...@@ -506,25 +536,13 @@ config PLATFORM_WANT_DEFAULT_MEM ...@@ -506,25 +536,13 @@ config PLATFORM_WANT_DEFAULT_MEM
def_bool n def_bool n
config DEFAULT_MEM_START config DEFAULT_MEM_START
hex "Physical address of the default memory area start" hex
depends on PLATFORM_WANT_DEFAULT_MEM prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM
default 0x00000000 if MMU default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM
default 0x60000000 if !MMU default 0x00000000
help
This is the base address of the default memory area.
Default memory area has platform-specific meaning, it may be used
for e.g. early cache initialization.
If unsure, leave the default value here.
config DEFAULT_MEM_SIZE
hex "Maximal size of the default memory area"
depends on PLATFORM_WANT_DEFAULT_MEM
default 0x04000000
help help
This is the size of the default memory area. This is the base address used for both PAGE_OFFSET and PHYS_OFFSET
Default memory area has platform-specific meaning, it may be used in noMMU configurations.
for e.g. early cache initialization.
If unsure, leave the default value here. If unsure, leave the default value here.
......
...@@ -15,10 +15,6 @@ ...@@ -15,10 +15,6 @@
*/ */
#include <asm/bootparam.h> #include <asm/bootparam.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/cacheasm.h>
#include <asm/initialize_mmu.h> #include <asm/initialize_mmu.h>
#include <asm/vectors.h> #include <asm/vectors.h>
#include <linux/linkage.h> #include <linux/linkage.h>
...@@ -33,16 +29,18 @@ _ResetVector: ...@@ -33,16 +29,18 @@ _ResetVector:
.begin no-absolute-literals .begin no-absolute-literals
.literal_position .literal_position
.align 4
RomInitAddr:
#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \ #if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
.word CONFIG_KERNEL_LOAD_ADDRESS .literal RomInitAddr, CONFIG_KERNEL_LOAD_ADDRESS
#else #else
.word KERNELOFFSET .literal RomInitAddr, KERNELOFFSET
#endif #endif
RomBootParam: #ifndef CONFIG_PARSE_BOOTPARAM
.word _bootparam .literal RomBootParam, 0
#else
.literal RomBootParam, _bootparam
.align 4
_bootparam: _bootparam:
.short BP_TAG_FIRST .short BP_TAG_FIRST
.short 4 .short 4
...@@ -50,6 +48,7 @@ _bootparam: ...@@ -50,6 +48,7 @@ _bootparam:
.short BP_TAG_LAST .short BP_TAG_LAST
.short 0 .short 0
.long 0 .long 0
#endif
.align 4 .align 4
_SetupMMU: _SetupMMU:
......
...@@ -33,13 +33,13 @@ CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212" ...@@ -33,13 +33,13 @@ CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
# CONFIG_XTENSA_VARIANT_MMU is not set # CONFIG_XTENSA_VARIANT_MMU is not set
CONFIG_XTENSA_UNALIGNED_USER=y CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_PREEMPT=y CONFIG_PREEMPT=y
CONFIG_MEMMAP_CACHEATTR=0xfff2442f
# CONFIG_PCI is not set # CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y CONFIG_XTENSA_PLATFORM_XTFPGA=y
CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000" CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
CONFIG_USE_OF=y CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB="kc705_nommu" CONFIG_BUILTIN_DTB="kc705_nommu"
CONFIG_DEFAULT_MEM_SIZE=0x10000000
CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_FLAT=y
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
......
...@@ -3,6 +3,7 @@ generic-y += compat.h ...@@ -3,6 +3,7 @@ generic-y += compat.h
generic-y += device.h generic-y += device.h
generic-y += div64.h generic-y += div64.h
generic-y += dma-contiguous.h generic-y += dma-contiguous.h
generic-y += dma-mapping.h
generic-y += emergency-restart.h generic-y += emergency-restart.h
generic-y += exec.h generic-y += exec.h
generic-y += extable.h generic-y += extable.h
......
...@@ -31,16 +31,32 @@ ...@@ -31,16 +31,32 @@
* *
*/ */
.macro __loop_cache_all ar at insn size line_width
movi \ar, 0 .macro __loop_cache_unroll ar at insn size line_width max_immed
.if (1 << (\line_width)) > (\max_immed)
.set _reps, 1
.elseif (2 << (\line_width)) > (\max_immed)
.set _reps, 2
.else
.set _reps, 4
.endif
__loopi \ar, \at, \size, (_reps << (\line_width))
.set _index, 0
.rep _reps
\insn \ar, _index << (\line_width)
.set _index, _index + 1
.endr
__endla \ar, \at, _reps << (\line_width)
.endm
__loopi \ar, \at, \size, (4 << (\line_width)) .macro __loop_cache_all ar at insn size line_width max_immed
\insn \ar, 0 << (\line_width)
\insn \ar, 1 << (\line_width) movi \ar, 0
\insn \ar, 2 << (\line_width) __loop_cache_unroll \ar, \at, \insn, \size, \line_width, \max_immed
\insn \ar, 3 << (\line_width)
__endla \ar, \at, 4 << (\line_width)
.endm .endm
...@@ -57,14 +73,9 @@ ...@@ -57,14 +73,9 @@
.endm .endm
.macro __loop_cache_page ar at insn line_width .macro __loop_cache_page ar at insn line_width max_immed
__loopi \ar, \at, PAGE_SIZE, 4 << (\line_width) __loop_cache_unroll \ar, \at, \insn, PAGE_SIZE, \line_width, \max_immed
\insn \ar, 0 << (\line_width)
\insn \ar, 1 << (\line_width)
\insn \ar, 2 << (\line_width)
\insn \ar, 3 << (\line_width)
__endla \ar, \at, 4 << (\line_width)
.endm .endm
...@@ -72,7 +83,8 @@ ...@@ -72,7 +83,8 @@
.macro ___unlock_dcache_all ar at .macro ___unlock_dcache_all ar at
#if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE \
XCHAL_DCACHE_LINEWIDTH 240
#endif #endif
.endm .endm
...@@ -81,7 +93,8 @@ ...@@ -81,7 +93,8 @@
.macro ___unlock_icache_all ar at .macro ___unlock_icache_all ar at
#if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE #if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE
__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH __loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE \
XCHAL_ICACHE_LINEWIDTH 240
#endif #endif
.endm .endm
...@@ -90,7 +103,8 @@ ...@@ -90,7 +103,8 @@
.macro ___flush_invalidate_dcache_all ar at .macro ___flush_invalidate_dcache_all ar at
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE \
XCHAL_DCACHE_LINEWIDTH 240
#endif #endif
.endm .endm
...@@ -99,7 +113,8 @@ ...@@ -99,7 +113,8 @@
.macro ___flush_dcache_all ar at .macro ___flush_dcache_all ar at
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE \
XCHAL_DCACHE_LINEWIDTH 240
#endif #endif
.endm .endm
...@@ -108,8 +123,8 @@ ...@@ -108,8 +123,8 @@
.macro ___invalidate_dcache_all ar at .macro ___invalidate_dcache_all ar at
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ __loop_cache_all \ar \at dii XCHAL_DCACHE_SIZE \
XCHAL_DCACHE_LINEWIDTH XCHAL_DCACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
...@@ -118,8 +133,8 @@ ...@@ -118,8 +133,8 @@
.macro ___invalidate_icache_all ar at .macro ___invalidate_icache_all ar at
#if XCHAL_ICACHE_SIZE #if XCHAL_ICACHE_SIZE
__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ __loop_cache_all \ar \at iii XCHAL_ICACHE_SIZE \
XCHAL_ICACHE_LINEWIDTH XCHAL_ICACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
...@@ -166,7 +181,7 @@ ...@@ -166,7 +181,7 @@
.macro ___flush_invalidate_dcache_page ar as .macro ___flush_invalidate_dcache_page ar as
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
...@@ -175,7 +190,7 @@ ...@@ -175,7 +190,7 @@
.macro ___flush_dcache_page ar as .macro ___flush_dcache_page ar as
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
...@@ -184,7 +199,7 @@ ...@@ -184,7 +199,7 @@
.macro ___invalidate_dcache_page ar as .macro ___invalidate_dcache_page ar as
#if XCHAL_DCACHE_SIZE #if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
...@@ -193,7 +208,7 @@ ...@@ -193,7 +208,7 @@
.macro ___invalidate_icache_page ar as .macro ___invalidate_icache_page ar as
#if XCHAL_ICACHE_SIZE #if XCHAL_ICACHE_SIZE
__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH 1020
#endif #endif
.endm .endm
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 - 2005 Tensilica Inc.
* Copyright (C) 2015 Cadence Design Systems Inc.
*/
#ifndef _XTENSA_DMA_MAPPING_H
#define _XTENSA_DMA_MAPPING_H
#include <asm/cache.h>
#include <asm/io.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
extern const struct dma_map_ops xtensa_dma_map_ops;
static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
{
return &xtensa_dma_map_ops;
}
#endif /* _XTENSA_DMA_MAPPING_H */
...@@ -177,36 +177,36 @@ ...@@ -177,36 +177,36 @@
#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
XCHAL_HAVE_SPANNING_WAY */ XCHAL_HAVE_SPANNING_WAY */
#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \ .endm
(XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
/* Enable data and instruction cache in the DEFAULT_MEMORY region .macro initialize_cacheattr
* if the processor has DTLB and ITLB.
*/
movi a5, PLATFORM_DEFAULT_MEM_START | XCHAL_SPANNING_WAY #if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
#if CONFIG_MEMMAP_CACHEATTR == 0x22222222 && XCHAL_HAVE_PTP_MMU
#error Default MEMMAP_CACHEATTR of 0x22222222 does not work with full MMU.
#endif
movi a5, XCHAL_SPANNING_WAY
movi a6, ~_PAGE_ATTRIB_MASK movi a6, ~_PAGE_ATTRIB_MASK
movi a7, CA_WRITEBACK movi a4, CONFIG_MEMMAP_CACHEATTR
movi a8, 0x20000000 movi a8, 0x20000000
movi a9, PLATFORM_DEFAULT_MEM_SIZE
j 2f
1: 1:
sub a9, a9, a8
2:
#if XCHAL_DCACHE_SIZE
rdtlb1 a3, a5 rdtlb1 a3, a5
xor a3, a3, a4
and a3, a3, a6 and a3, a3, a6
or a3, a3, a7 xor a3, a3, a4
wdtlb a3, a5 wdtlb a3, a5
#endif ritlb1 a3, a5
#if XCHAL_ICACHE_SIZE xor a3, a3, a4
ritlb1 a4, a5 and a3, a3, a6
and a4, a4, a6 xor a3, a3, a4
or a4, a4, a7 witlb a3, a5
witlb a4, a5
#endif
add a5, a5, a8 add a5, a5, a8
bltu a8, a9, 1b srli a4, a4, 4
bgeu a5, a8, 1b
isync
#endif #endif
.endm .endm
......
...@@ -12,32 +12,17 @@ ...@@ -12,32 +12,17 @@
#define _XTENSA_IRQ_H #define _XTENSA_IRQ_H
#include <linux/init.h> #include <linux/init.h>
#include <platform/hardware.h>
#include <variant/core.h> #include <variant/core.h>
#ifdef CONFIG_VARIANT_IRQ_SWITCH #ifdef CONFIG_PLATFORM_NR_IRQS
#include <variant/irq.h> # define PLATFORM_NR_IRQS CONFIG_PLATFORM_NR_IRQS
#else #else
static inline void variant_irq_enable(unsigned int irq) { }
static inline void variant_irq_disable(unsigned int irq) { }
#endif
#ifndef VARIANT_NR_IRQS
# define VARIANT_NR_IRQS 0
#endif
#ifndef PLATFORM_NR_IRQS
# define PLATFORM_NR_IRQS 0 # define PLATFORM_NR_IRQS 0
#endif #endif
#define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS + 1) #define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS + 1)
#define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1) #define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1)
#if VARIANT_NR_IRQS == 0
static inline void variant_init_irq(void) { }
#else
void variant_init_irq(void) __init;
#endif
static __inline__ int irq_canonicalize(int irq) static __inline__ int irq_canonicalize(int irq)
{ {
return (irq); return (irq);
......
...@@ -63,12 +63,6 @@ ...@@ -63,12 +63,6 @@
#error XCHAL_KSEG_PADDR is not properly aligned to XCHAL_KSEG_ALIGNMENT #error XCHAL_KSEG_PADDR is not properly aligned to XCHAL_KSEG_ALIGNMENT
#endif #endif
#else
#define XCHAL_KSEG_CACHED_VADDR __XTENSA_UL_CONST(0xd0000000)
#define XCHAL_KSEG_BYPASS_VADDR __XTENSA_UL_CONST(0xd8000000)
#define XCHAL_KSEG_SIZE __XTENSA_UL_CONST(0x08000000)
#endif #endif
#ifndef CONFIG_KASAN #ifndef CONFIG_KASAN
......
...@@ -14,7 +14,6 @@ ...@@ -14,7 +14,6 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/types.h> #include <asm/types.h>
#include <asm/cache.h> #include <asm/cache.h>
#include <platform/hardware.h>
#include <asm/kmem_layout.h> #include <asm/kmem_layout.h>
/* /*
...@@ -31,8 +30,8 @@ ...@@ -31,8 +30,8 @@
#define MAX_LOW_PFN (PHYS_PFN(XCHAL_KSEG_PADDR) + \ #define MAX_LOW_PFN (PHYS_PFN(XCHAL_KSEG_PADDR) + \
PHYS_PFN(XCHAL_KSEG_SIZE)) PHYS_PFN(XCHAL_KSEG_SIZE))
#else #else
#define PAGE_OFFSET PLATFORM_DEFAULT_MEM_START #define PAGE_OFFSET _AC(CONFIG_DEFAULT_MEM_START, UL)
#define PHYS_OFFSET PLATFORM_DEFAULT_MEM_START #define PHYS_OFFSET _AC(CONFIG_DEFAULT_MEM_START, UL)
#define MAX_LOW_PFN PHYS_PFN(0xfffffffful) #define MAX_LOW_PFN PHYS_PFN(0xfffffffful)
#endif #endif
......
...@@ -66,6 +66,7 @@ ...@@ -66,6 +66,7 @@
#define FIRST_USER_ADDRESS 0UL #define FIRST_USER_ADDRESS 0UL
#define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) #define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT)
#ifdef CONFIG_MMU
/* /*
* Virtual memory area. We keep a distance to other memory regions to be * Virtual memory area. We keep a distance to other memory regions to be
* on the safe side. We also use this area for cache aliasing. * on the safe side. We also use this area for cache aliasing.
...@@ -80,6 +81,13 @@ ...@@ -80,6 +81,13 @@
#define TLBTEMP_SIZE ICACHE_WAY_SIZE #define TLBTEMP_SIZE ICACHE_WAY_SIZE
#endif #endif
#else
#define VMALLOC_START __XTENSA_UL_CONST(0)
#define VMALLOC_END __XTENSA_UL_CONST(0xffffffff)
#endif
/* /*
* For the Xtensa architecture, the PTE layout is as follows: * For the Xtensa architecture, the PTE layout is as follows:
* *
......
...@@ -75,4 +75,31 @@ extern void platform_calibrate_ccount (void); ...@@ -75,4 +75,31 @@ extern void platform_calibrate_ccount (void);
*/ */
void cpu_reset(void) __attribute__((noreturn)); void cpu_reset(void) __attribute__((noreturn));
/*
* Memory caching is platform-dependent in noMMU xtensa configurations.
* The following set of functions should be implemented in platform code
* in order to enable coherent DMA memory operations when CONFIG_MMU is not
* enabled. Default implementations do nothing and issue a warning.
*/
/*
* Check whether p points to a cached memory.
*/
bool platform_vaddr_cached(const void *p);
/*
* Check whether p points to an uncached memory.
*/
bool platform_vaddr_uncached(const void *p);
/*
* Return pointer to an uncached view of the cached sddress p.
*/
void *platform_vaddr_to_uncached(void *p);
/*
* Return pointer to a cached view of the uncached sddress p.
*/
void *platform_vaddr_to_cached(void *p);
#endif /* _XTENSA_PLATFORM_H */ #endif /* _XTENSA_PLATFORM_H */
...@@ -11,7 +11,6 @@ ...@@ -11,7 +11,6 @@
#define _XTENSA_PROCESSOR_H #define _XTENSA_PROCESSOR_H
#include <variant/core.h> #include <variant/core.h>
#include <platform/hardware.h>
#include <linux/compiler.h> #include <linux/compiler.h>
#include <asm/ptrace.h> #include <asm/ptrace.h>
......
...@@ -19,7 +19,6 @@ ...@@ -19,7 +19,6 @@
#define _XTENSA_VECTORS_H #define _XTENSA_VECTORS_H
#include <variant/core.h> #include <variant/core.h>
#include <platform/hardware.h>
#include <asm/kmem_layout.h> #include <asm/kmem_layout.h>
#if XCHAL_HAVE_PTP_MMU #if XCHAL_HAVE_PTP_MMU
......
...@@ -181,6 +181,8 @@ ENTRY(_startup) ...@@ -181,6 +181,8 @@ ENTRY(_startup)
isync isync
initialize_cacheattr
#ifdef CONFIG_HAVE_SMP #ifdef CONFIG_HAVE_SMP
movi a2, CCON # MX External Register to Configure Cache movi a2, CCON # MX External Register to Configure Cache
movi a3, 1 movi a3, 1
......
...@@ -158,7 +158,6 @@ void __init init_IRQ(void) ...@@ -158,7 +158,6 @@ void __init init_IRQ(void)
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
ipi_init(); ipi_init();
#endif #endif
variant_init_irq();
} }
#ifdef CONFIG_HOTPLUG_CPU #ifdef CONFIG_HOTPLUG_CPU
......
...@@ -16,26 +16,25 @@ ...@@ -16,26 +16,25 @@
*/ */
#include <linux/dma-contiguous.h> #include <linux/dma-contiguous.h>
#include <linux/dma-noncoherent.h>
#include <linux/dma-direct.h> #include <linux/dma-direct.h>
#include <linux/gfp.h> #include <linux/gfp.h>
#include <linux/highmem.h> #include <linux/highmem.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/types.h> #include <linux/types.h>
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/platform.h>
static void do_cache_op(dma_addr_t dma_handle, size_t size, static void do_cache_op(phys_addr_t paddr, size_t size,
void (*fn)(unsigned long, unsigned long)) void (*fn)(unsigned long, unsigned long))
{ {
unsigned long off = dma_handle & (PAGE_SIZE - 1); unsigned long off = paddr & (PAGE_SIZE - 1);
unsigned long pfn = PFN_DOWN(dma_handle); unsigned long pfn = PFN_DOWN(paddr);
struct page *page = pfn_to_page(pfn); struct page *page = pfn_to_page(pfn);
if (!PageHighMem(page)) if (!PageHighMem(page))
fn((unsigned long)bus_to_virt(dma_handle), size); fn((unsigned long)phys_to_virt(paddr), size);
else else
while (size > 0) { while (size > 0) {
size_t sz = min_t(size_t, size, PAGE_SIZE - off); size_t sz = min_t(size_t, size, PAGE_SIZE - off);
...@@ -49,14 +48,13 @@ static void do_cache_op(dma_addr_t dma_handle, size_t size, ...@@ -49,14 +48,13 @@ static void do_cache_op(dma_addr_t dma_handle, size_t size,
} }
} }
static void xtensa_sync_single_for_cpu(struct device *dev, void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
dma_addr_t dma_handle, size_t size, size_t size, enum dma_data_direction dir)
enum dma_data_direction dir)
{ {
switch (dir) { switch (dir) {
case DMA_BIDIRECTIONAL: case DMA_BIDIRECTIONAL:
case DMA_FROM_DEVICE: case DMA_FROM_DEVICE:
do_cache_op(dma_handle, size, __invalidate_dcache_range); do_cache_op(paddr, size, __invalidate_dcache_range);
break; break;
case DMA_NONE: case DMA_NONE:
...@@ -68,15 +66,14 @@ static void xtensa_sync_single_for_cpu(struct device *dev, ...@@ -68,15 +66,14 @@ static void xtensa_sync_single_for_cpu(struct device *dev,
} }
} }
static void xtensa_sync_single_for_device(struct device *dev, void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
dma_addr_t dma_handle, size_t size, size_t size, enum dma_data_direction dir)
enum dma_data_direction dir)
{ {
switch (dir) { switch (dir) {
case DMA_BIDIRECTIONAL: case DMA_BIDIRECTIONAL:
case DMA_TO_DEVICE: case DMA_TO_DEVICE:
if (XCHAL_DCACHE_IS_WRITEBACK) if (XCHAL_DCACHE_IS_WRITEBACK)
do_cache_op(dma_handle, size, __flush_dcache_range); do_cache_op(paddr, size, __flush_dcache_range);
break; break;
case DMA_NONE: case DMA_NONE:
...@@ -88,43 +85,66 @@ static void xtensa_sync_single_for_device(struct device *dev, ...@@ -88,43 +85,66 @@ static void xtensa_sync_single_for_device(struct device *dev,
} }
} }
static void xtensa_sync_sg_for_cpu(struct device *dev, #ifdef CONFIG_MMU
struct scatterlist *sg, int nents, bool platform_vaddr_cached(const void *p)
enum dma_data_direction dir)
{ {
struct scatterlist *s; unsigned long addr = (unsigned long)p;
int i;
for_each_sg(sg, s, nents, i) { return addr >= XCHAL_KSEG_CACHED_VADDR &&
xtensa_sync_single_for_cpu(dev, sg_dma_address(s), addr - XCHAL_KSEG_CACHED_VADDR < XCHAL_KSEG_SIZE;
sg_dma_len(s), dir);
}
} }
static void xtensa_sync_sg_for_device(struct device *dev, bool platform_vaddr_uncached(const void *p)
struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{ {
struct scatterlist *s; unsigned long addr = (unsigned long)p;
int i;
for_each_sg(sg, s, nents, i) { return addr >= XCHAL_KSEG_BYPASS_VADDR &&
xtensa_sync_single_for_device(dev, sg_dma_address(s), addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE;
sg_dma_len(s), dir); }
}
void *platform_vaddr_to_uncached(void *p)
{
return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
}
void *platform_vaddr_to_cached(void *p)
{
return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
}
#else
bool __attribute__((weak)) platform_vaddr_cached(const void *p)
{
WARN_ONCE(1, "Default %s implementation is used\n", __func__);
return true;
}
bool __attribute__((weak)) platform_vaddr_uncached(const void *p)
{
WARN_ONCE(1, "Default %s implementation is used\n", __func__);
return false;
}
void __attribute__((weak)) *platform_vaddr_to_uncached(void *p)
{
WARN_ONCE(1, "Default %s implementation is used\n", __func__);
return p;
}
void __attribute__((weak)) *platform_vaddr_to_cached(void *p)
{
WARN_ONCE(1, "Default %s implementation is used\n", __func__);
return p;
} }
#endif
/* /*
* Note: We assume that the full memory space is always mapped to 'kseg' * Note: We assume that the full memory space is always mapped to 'kseg'
* Otherwise we have to use page attributes (not implemented). * Otherwise we have to use page attributes (not implemented).
*/ */
static void *xtensa_dma_alloc(struct device *dev, size_t size, void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
dma_addr_t *handle, gfp_t flag, gfp_t flag, unsigned long attrs)
unsigned long attrs)
{ {
unsigned long ret;
unsigned long uncached;
unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
struct page *page = NULL; struct page *page = NULL;
...@@ -147,6 +167,10 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size, ...@@ -147,6 +167,10 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
*handle = phys_to_dma(dev, page_to_phys(page)); *handle = phys_to_dma(dev, page_to_phys(page));
if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
return page;
}
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
if (PageHighMem(page)) { if (PageHighMem(page)) {
void *p; void *p;
...@@ -161,27 +185,21 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size, ...@@ -161,27 +185,21 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
return p; return p;
} }
#endif #endif
ret = (unsigned long)page_address(page); BUG_ON(!platform_vaddr_cached(page_address(page)));
BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR || __invalidate_dcache_range((unsigned long)page_address(page), size);
ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1); return platform_vaddr_to_uncached(page_address(page));
uncached = ret + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
__invalidate_dcache_range(ret, size);
return (void *)uncached;
} }
static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr, void arch_dma_free(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle, unsigned long attrs) dma_addr_t dma_handle, unsigned long attrs)
{ {
unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
unsigned long addr = (unsigned long)vaddr;
struct page *page; struct page *page;
if (addr >= XCHAL_KSEG_BYPASS_VADDR && if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE) { page = vaddr;
addr += XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR; } else if (platform_vaddr_uncached(vaddr)) {
page = virt_to_page(addr); page = virt_to_page(platform_vaddr_to_cached(vaddr));
} else { } else {
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
dma_common_free_remap(vaddr, size, VM_MAP); dma_common_free_remap(vaddr, size, VM_MAP);
...@@ -192,72 +210,3 @@ static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr, ...@@ -192,72 +210,3 @@ static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr,
if (!dma_release_from_contiguous(dev, page, count)) if (!dma_release_from_contiguous(dev, page, count))
__free_pages(page, get_order(size)); __free_pages(page, get_order(size));
} }
static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
unsigned long attrs)
{
dma_addr_t dma_handle = page_to_phys(page) + offset;
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
xtensa_sync_single_for_device(dev, dma_handle, size, dir);
return dma_handle;
}
static void xtensa_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir,
unsigned long attrs)
{
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
xtensa_sync_single_for_cpu(dev, dma_handle, size, dir);
}
static int xtensa_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir,
unsigned long attrs)
{
struct scatterlist *s;
int i;
for_each_sg(sg, s, nents, i) {
s->dma_address = xtensa_map_page(dev, sg_page(s), s->offset,
s->length, dir, attrs);
}
return nents;
}
static void xtensa_unmap_sg(struct device *dev,
struct scatterlist *sg, int nents,
enum dma_data_direction dir,
unsigned long attrs)
{
struct scatterlist *s;
int i;
for_each_sg(sg, s, nents, i) {
xtensa_unmap_page(dev, sg_dma_address(s),
sg_dma_len(s), dir, attrs);
}
}
int xtensa_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return 0;
}
const struct dma_map_ops xtensa_dma_map_ops = {
.alloc = xtensa_dma_alloc,
.free = xtensa_dma_free,
.map_page = xtensa_map_page,
.unmap_page = xtensa_unmap_page,
.map_sg = xtensa_map_sg,
.unmap_sg = xtensa_unmap_sg,
.sync_single_for_cpu = xtensa_sync_single_for_cpu,
.sync_single_for_device = xtensa_sync_single_for_device,
.sync_sg_for_cpu = xtensa_sync_sg_for_cpu,
.sync_sg_for_device = xtensa_sync_sg_for_device,
.mapping_error = xtensa_dma_mapping_error,
};
EXPORT_SYMBOL(xtensa_dma_map_ops);
...@@ -47,8 +47,6 @@ ...@@ -47,8 +47,6 @@
#include <asm/smp.h> #include <asm/smp.h>
#include <asm/sysmem.h> #include <asm/sysmem.h>
#include <platform/hardware.h>
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { struct screen_info screen_info = {
.orig_x = 0, .orig_x = 0,
...@@ -81,6 +79,7 @@ static char __initdata command_line[COMMAND_LINE_SIZE]; ...@@ -81,6 +79,7 @@ static char __initdata command_line[COMMAND_LINE_SIZE];
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
#endif #endif
#ifdef CONFIG_PARSE_BOOTPARAM
/* /*
* Boot parameter parsing. * Boot parameter parsing.
* *
...@@ -178,6 +177,13 @@ static int __init parse_bootparam(const bp_tag_t* tag) ...@@ -178,6 +177,13 @@ static int __init parse_bootparam(const bp_tag_t* tag)
return 0; return 0;
} }
#else
static int __init parse_bootparam(const bp_tag_t *tag)
{
pr_info("Ignoring boot parameters at %p\n", tag);
return 0;
}
#endif
#ifdef CONFIG_OF #ifdef CONFIG_OF
......
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
#include <asm/vectors.h> #include <asm/vectors.h>
#include <variant/core.h> #include <variant/core.h>
#include <platform/hardware.h>
OUTPUT_ARCH(xtensa) OUTPUT_ARCH(xtensa)
ENTRY(_start) ENTRY(_start)
......
/*
* include/asm-xtensa/platform-iss/hardware.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 Tensilica Inc.
*/
/*
* This file contains the default configuration of ISS.
*/
#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H
#define _XTENSA_PLATFORM_ISS_HARDWARE_H
/*
* Memory configuration.
*/
#define PLATFORM_DEFAULT_MEM_START 0x00000000
#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
/*
* Interrupt configuration.
*/
#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */
...@@ -17,17 +17,6 @@ ...@@ -17,17 +17,6 @@
#include <variant/core.h> #include <variant/core.h>
/*
* Memory configuration.
*/
#define PLATFORM_DEFAULT_MEM_START 0x00000000
#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
/*
* Number of platform IRQs
*/
#define PLATFORM_NR_IRQS 3
/* /*
* On-board components. * On-board components.
*/ */
......
...@@ -17,15 +17,6 @@ ...@@ -17,15 +17,6 @@
#ifndef __XTENSA_XTAVNET_HARDWARE_H #ifndef __XTENSA_XTAVNET_HARDWARE_H
#define __XTENSA_XTAVNET_HARDWARE_H #define __XTENSA_XTAVNET_HARDWARE_H
/* Memory configuration. */
#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
#define PLATFORM_DEFAULT_MEM_SIZE __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
/* Interrupt configuration. */
#define PLATFORM_NR_IRQS 0
/* Default assignment of LX60 devices to external interrupts. */ /* Default assignment of LX60 devices to external interrupts. */
#ifdef CONFIG_XTENSA_MX #ifdef CONFIG_XTENSA_MX
......
/*
* xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
* processor CORE configuration
*
* See <xtensa/config/core.h>, which includes this file, for more details.
*/
/* Xtensa processor core configuration information.
Copyright (c) 1999-2015 Tensilica Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XTENSA_CORE_CONFIGURATION_H
#define _XTENSA_CORE_CONFIGURATION_H
/****************************************************************************
Parameters Useful for Any Code, USER or PRIVILEGED
****************************************************************************/
/*
* Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
* configured, and a value of 0 otherwise. These macros are always defined.
*/
/*----------------------------------------------------------------------
ISA
----------------------------------------------------------------------*/
#define XCHAL_HAVE_BE 1 /* big-endian byte ordering */
#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */
#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */
#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */
#define XCHAL_HAVE_DEBUG 1 /* debug option */
#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */
#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */
#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */
#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */
#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */
#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */
#define XCHAL_HAVE_MUL32 1 /* MULL instruction */
#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */
#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */
#define XCHAL_HAVE_L32R 1 /* L32R instruction */
#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */
#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
#define XCHAL_HAVE_ABS 1 /* ABS instruction */
/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */
#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */
#define XCHAL_HAVE_SPECULATION 0 /* speculation */
#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */
#define XCHAL_NUM_CONTEXTS 1 /* */
#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */
#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
#define XCHAL_HAVE_PRID 1 /* processor ID register */
#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */
#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */
#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */
#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */
#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */
#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */
#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */
#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */
#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */
#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */
#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */
#define XCHAL_HAVE_MAC16 1 /* MAC16 package */
#define XCHAL_HAVE_FUSION 0 /* Fusion*/
#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */
#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */
#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */
#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */
#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */
#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */
#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */
#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */
#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */
#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */
#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */
#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */
#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */
#define XCHAL_HAVE_HIFI2 1 /* HiFi2 Audio Engine pkg */
#define XCHAL_HAVE_HIFI2_MUL32X24 1 /* HiFi2 and 32x24 MACs */
#define XCHAL_HAVE_HIFI2EP 1 /* HiFi2EP */
#define XCHAL_HAVE_HIFI_MINI 0
#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */
#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */
#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */
#define XCHAL_HAVE_FP 0 /* single prec floating point */
#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */
#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */
#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */
#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */
#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */
#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */
#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/
#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */
#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/
#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */
#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */
#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */
#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */
#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
#define XCHAL_HAVE_PDX4 0 /* PDX4 */
#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */
#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */
#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */
#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */
#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */
#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */
#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */
#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */
#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */
#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */
#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */
#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */
#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */
#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */
#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */
#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */
/*----------------------------------------------------------------------
MISC
----------------------------------------------------------------------*/
#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */
#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */
#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */
#define XCHAL_DATA_WIDTH 8 /* data width in bytes */
#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay
(1 = 5-stage, 2 = 7-stage) */
#define XCHAL_CLOCK_GATING_GLOBAL 0 /* global clock gating */
#define XCHAL_CLOCK_GATING_FUNCUNIT 0 /* funct. unit clock gating */
/* In T1050, applies to selected core load and store instructions (see ISA): */
#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */
#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/
#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */
#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/
#define XCHAL_SW_VERSION 1100002 /* sw version of this header */
#define XCHAL_CORE_ID "test_kc705_be" /* alphanum core name
(CoreID) set in the Xtensa
Processor Generator */
#define XCHAL_BUILD_UNIQUE_ID 0x00058D8C /* 22-bit sw build ID */
/*
* These definitions describe the hardware targeted by this software.
*/
#define XCHAL_HW_CONFIGID0 0xC1B3FFFF /* ConfigID hi 32 bits*/
#define XCHAL_HW_CONFIGID1 0x1C858D8C /* ConfigID lo 32 bits*/
#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */
#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */
#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */
#define XCHAL_HW_VERSION 260002 /* major*100+minor */
#define XCHAL_HW_REL_LX6 1
#define XCHAL_HW_REL_LX6_0 1
#define XCHAL_HW_REL_LX6_0_2 1
#define XCHAL_HW_CONFIGID_RELIABLE 1
/* If software targets a *range* of hardware versions, these are the bounds: */
#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */
#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */
#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */
#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */
#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */
#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */
/*----------------------------------------------------------------------
CACHE
----------------------------------------------------------------------*/
#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */
#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */
#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */
#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */
#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */
#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */
#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */
#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */
#define XCHAL_HAVE_PREFETCH 1 /* PREFCTL register */
#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */
#define XCHAL_PREFETCH_CASTOUT_LINES 1 /* dcache pref. castout bufsz */
#define XCHAL_PREFETCH_ENTRIES 8 /* cache prefetch entries */
#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */
#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */
#define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */
#define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */
#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */
#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */
/****************************************************************************
Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
****************************************************************************/
#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
/*----------------------------------------------------------------------
CACHE
----------------------------------------------------------------------*/
#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */
/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
/* Number of cache sets in log2(lines per way): */
#define XCHAL_ICACHE_SETWIDTH 7
#define XCHAL_DCACHE_SETWIDTH 7
/* Cache set associativity (number of ways): */
#define XCHAL_ICACHE_WAYS 4
#define XCHAL_DCACHE_WAYS 4
/* Cache features: */
#define XCHAL_ICACHE_LINE_LOCKABLE 1
#define XCHAL_DCACHE_LINE_LOCKABLE 1
#define XCHAL_ICACHE_ECC_PARITY 0
#define XCHAL_DCACHE_ECC_PARITY 0
/* Cache access size in bytes (affects operation of SICW instruction): */
#define XCHAL_ICACHE_ACCESS_SIZE 8
#define XCHAL_DCACHE_ACCESS_SIZE 8
#define XCHAL_DCACHE_BANKS 1 /* number of banks */
/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
#define XCHAL_CA_BITS 4
/* Whether MEMCTL register has anything useful */
#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \
XCHAL_DCACHE_IS_COHERENT || \
XCHAL_HAVE_ICACHE_DYN_WAYS || \
XCHAL_HAVE_DCACHE_DYN_WAYS) && \
(XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
/*----------------------------------------------------------------------
INTERNAL I/D RAM/ROMs and XLMI
----------------------------------------------------------------------*/
#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */
#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */
#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */
#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/
/*----------------------------------------------------------------------
INTERRUPTS and TIMERS
----------------------------------------------------------------------*/
#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */
#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */
#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
#define XCHAL_NUM_EXTINTERRUPTS 16 /* num of external interrupts */
#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels
(not including level zero) */
#define XCHAL_EXCM_LEVEL 4 /* level masked by PS.EXCM */
/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
/* Masks of interrupts at each interrupt level: */
#define XCHAL_INTLEVEL1_MASK 0x001F00BF
#define XCHAL_INTLEVEL2_MASK 0x00000140
#define XCHAL_INTLEVEL3_MASK 0x00200E00
#define XCHAL_INTLEVEL4_MASK 0x00008000
#define XCHAL_INTLEVEL5_MASK 0x00003000
#define XCHAL_INTLEVEL6_MASK 0x00000000
#define XCHAL_INTLEVEL7_MASK 0x00004000
/* Masks of interrupts at each range 1..n of interrupt levels: */
#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F00BF
#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F01FF
#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F0FFF
#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F8FFF
#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF
#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF
#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF
/* Level of each interrupt: */
#define XCHAL_INT0_LEVEL 1
#define XCHAL_INT1_LEVEL 1
#define XCHAL_INT2_LEVEL 1
#define XCHAL_INT3_LEVEL 1
#define XCHAL_INT4_LEVEL 1
#define XCHAL_INT5_LEVEL 1
#define XCHAL_INT6_LEVEL 2
#define XCHAL_INT7_LEVEL 1
#define XCHAL_INT8_LEVEL 2
#define XCHAL_INT9_LEVEL 3
#define XCHAL_INT10_LEVEL 3
#define XCHAL_INT11_LEVEL 3
#define XCHAL_INT12_LEVEL 5
#define XCHAL_INT13_LEVEL 5
#define XCHAL_INT14_LEVEL 7
#define XCHAL_INT15_LEVEL 4
#define XCHAL_INT16_LEVEL 1
#define XCHAL_INT17_LEVEL 1
#define XCHAL_INT18_LEVEL 1
#define XCHAL_INT19_LEVEL 1
#define XCHAL_INT20_LEVEL 1
#define XCHAL_INT21_LEVEL 3
#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */
#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */
#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with
EXCSAVE/EPS/EPC_n, RFI n) */
/* Type of each interrupt: */
#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER
#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER
#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER
#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI
#define XCHAL_INT15_TYPE XTHAL_INTTYPE_PROFILING
#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE
#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE
#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE
#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE
#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE
#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE
/* Masks of interrupts for each type of interrupt: */
#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000
#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880
#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F0000
#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F
#define XCHAL_INTTYPE_MASK_TIMER 0x00002440
#define XCHAL_INTTYPE_MASK_NMI 0x00004000
#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
#define XCHAL_INTTYPE_MASK_PROFILING 0x00008000
/* Interrupt numbers assigned to specific interrupt sources: */
#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */
#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */
#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */
#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */
#define XCHAL_PROFILING_INTERRUPT 15 /* profiling interrupt */
/* Interrupt numbers for levels at which only one interrupt is configured: */
#define XCHAL_INTLEVEL4_NUM 15
#define XCHAL_INTLEVEL7_NUM 14
/* (There are many interrupts each at level(s) 1, 2, 3, 5.) */
/*
* External interrupt mapping.
* These macros describe how Xtensa processor interrupt numbers
* (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
* map to external BInterrupt<n> pins, for those interrupts
* configured as external (level-triggered, edge-triggered, or NMI).
* See the Xtensa processor databook for more details.
*/
/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */
#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */
#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */
#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */
#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */
#define XCHAL_EXTINT8_NUM 12 /* (intlevel 5) */
#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */
#define XCHAL_EXTINT10_NUM 16 /* (intlevel 1) */
#define XCHAL_EXTINT11_NUM 17 /* (intlevel 1) */
#define XCHAL_EXTINT12_NUM 18 /* (intlevel 1) */
#define XCHAL_EXTINT13_NUM 19 /* (intlevel 1) */
#define XCHAL_EXTINT14_NUM 20 /* (intlevel 1) */
#define XCHAL_EXTINT15_NUM 21 /* (intlevel 3) */
/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */
#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */
#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */
#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */
#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */
#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */
#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */
#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */
#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */
#define XCHAL_INT12_EXTNUM 8 /* (intlevel 5) */
#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */
#define XCHAL_INT16_EXTNUM 10 /* (intlevel 1) */
#define XCHAL_INT17_EXTNUM 11 /* (intlevel 1) */
#define XCHAL_INT18_EXTNUM 12 /* (intlevel 1) */
#define XCHAL_INT19_EXTNUM 13 /* (intlevel 1) */
#define XCHAL_INT20_EXTNUM 14 /* (intlevel 1) */
#define XCHAL_INT21_EXTNUM 15 /* (intlevel 3) */
/*----------------------------------------------------------------------
EXCEPTIONS and VECTORS
----------------------------------------------------------------------*/
#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
number: 1 == XEA1 (old)
2 == XEA2 (new)
0 == XEAX (extern) or TX */
#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
#define XCHAL_HAVE_HALT 0 /* halt architecture option */
#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */
#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */
#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */
#define XCHAL_VECBASE_RESET_VADDR 0x00002000 /* VECBASE reset value */
#define XCHAL_VECBASE_RESET_PADDR 0x00002000
#define XCHAL_RESET_VECBASE_OVERLAP 0
#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000
#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000
#define XCHAL_RESET_VECTOR1_VADDR 0x00001000
#define XCHAL_RESET_VECTOR1_PADDR 0x00001000
#define XCHAL_RESET_VECTOR_VADDR 0xFE000000
#define XCHAL_RESET_VECTOR_PADDR 0xFE000000
#define XCHAL_USER_VECOFS 0x00000340
#define XCHAL_USER_VECTOR_VADDR 0x00002340
#define XCHAL_USER_VECTOR_PADDR 0x00002340
#define XCHAL_KERNEL_VECOFS 0x00000300
#define XCHAL_KERNEL_VECTOR_VADDR 0x00002300
#define XCHAL_KERNEL_VECTOR_PADDR 0x00002300
#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0
#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000023C0
#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000023C0
#define XCHAL_WINDOW_OF4_VECOFS 0x00000000
#define XCHAL_WINDOW_UF4_VECOFS 0x00000040
#define XCHAL_WINDOW_OF8_VECOFS 0x00000080
#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0
#define XCHAL_WINDOW_OF12_VECOFS 0x00000100
#define XCHAL_WINDOW_UF12_VECOFS 0x00000140
#define XCHAL_WINDOW_VECTORS_VADDR 0x00002000
#define XCHAL_WINDOW_VECTORS_PADDR 0x00002000
#define XCHAL_INTLEVEL2_VECOFS 0x00000180
#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00002180
#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00002180
#define XCHAL_INTLEVEL3_VECOFS 0x000001C0
#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x000021C0
#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000021C0
#define XCHAL_INTLEVEL4_VECOFS 0x00000200
#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x00002200
#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00002200
#define XCHAL_INTLEVEL5_VECOFS 0x00000240
#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x00002240
#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00002240
#define XCHAL_INTLEVEL6_VECOFS 0x00000280
#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00002280
#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00002280
#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS
#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR
#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR
#define XCHAL_NMI_VECOFS 0x000002C0
#define XCHAL_NMI_VECTOR_VADDR 0x000022C0
#define XCHAL_NMI_VECTOR_PADDR 0x000022C0
#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS
#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR
#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR
/*----------------------------------------------------------------------
DEBUG MODULE
----------------------------------------------------------------------*/
/* Misc */
#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */
#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */
#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */
/* On-Chip Debug (OCD) */
#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */
#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */
/* TRAX (in core) */
#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */
#define XCHAL_TRAX_MEM_SIZE 262144 /* TRAX memory size in bytes */
#define XCHAL_TRAX_MEM_SHAREABLE 1 /* start/end regs; ready sig. */
#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */
#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */
/* Perf counters */
#define XCHAL_NUM_PERF_COUNTERS 8 /* performance counters */
/*----------------------------------------------------------------------
MMU
----------------------------------------------------------------------*/
/* See core-matmap.h header file for more details. */
#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */
#define XCHAL_SPANNING_WAY 6 /* TLB spanning way number */
#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */
#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */
#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table
[autorefill] and protection)
usable for an MMU-based OS */
/* If none of the above last 4 are set, it's a custom TLB configuration. */
#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */
#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */
#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */
#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
#endif /* _XTENSA_CORE_CONFIGURATION_H */
/*
* tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
*
* NOTE: This header file is not meant to be included directly.
*/
/* This header file contains assembly-language definitions (assembly
macros, etc.) for this specific Xtensa processor's TIE extensions
and options. It is customized to this Xtensa processor configuration.
Copyright (c) 1999-2015 Cadence Design Systems Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XTENSA_CORE_TIE_ASM_H
#define _XTENSA_CORE_TIE_ASM_H
/* Selection parameter values for save-area save/restore macros: */
/* Option vs. TIE: */
#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
/* Whether used automatically by compiler: */
#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
/* ABI handling across function calls: */
#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
/* Misc */
#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
| ((ccuse) & XTHAL_SAS_ANYCC) \
| ((abi) & XTHAL_SAS_ANYABI) )
/*
* Macro to store all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger store sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to store. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to store, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any store.
*/
.macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional global registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
xchal_sa_align \ptr, 0, 1020, 4, 4
rur.THREADPTR \at1 // threadptr option
s32i \at1, \ptr, .Lxchal_ofs_+0
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1020, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
rsr.ACCLO \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr.ACCHI \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1000, 4, 4
rsr.BR \at1 // boolean option
s32i \at1, \ptr, .Lxchal_ofs_+0
rsr.SCOMPARE1 \at1 // conditional store option
s32i \at1, \ptr, .Lxchal_ofs_+4
rsr.M0 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+8
rsr.M1 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+12
rsr.M2 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+16
rsr.M3 \at1 // MAC16 option
s32i \at1, \ptr, .Lxchal_ofs_+20
.set .Lxchal_ofs_, .Lxchal_ofs_ + 24
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1000, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 24
.endif
.endm // xchal_ncp_store
/*
* Macro to load all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 4 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters:
* continue If macro invoked as part of a larger load sequence, set to 1
* if this is not the first in the sequence. Defaults to 0.
* ofs Offset from start of larger sequence (from value of first ptr
* in sequence) at which to load. Defaults to next available space
* (or 0 if <continue> is 0).
* select Select what category(ies) of registers to load, as a bitmask
* (see XTHAL_SAS_xxx constants). Defaults to all registers.
* alloc Select what category(ies) of registers to allocate; if any
* category is selected here that is not in <select>, space for
* the corresponding registers is skipped without doing any load.
*/
.macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Optional global registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
xchal_sa_align \ptr, 0, 1020, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wur.THREADPTR \at1 // threadptr option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1020, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
// Optional caller-saved registers used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1016, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr.ACCLO \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr.ACCHI \at1 // MAC16 option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1016, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 8
.endif
// Optional caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 1000, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_+0
wsr.BR \at1 // boolean option
l32i \at1, \ptr, .Lxchal_ofs_+4
wsr.SCOMPARE1 \at1 // conditional store option
l32i \at1, \ptr, .Lxchal_ofs_+8
wsr.M0 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+12
wsr.M1 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+16
wsr.M2 \at1 // MAC16 option
l32i \at1, \ptr, .Lxchal_ofs_+20
wsr.M3 \at1 // MAC16 option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 24
.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 1000, 4, 4
.set .Lxchal_ofs_, .Lxchal_ofs_ + 24
.endif
.endm // xchal_ncp_load
#define XCHAL_NCP_NUM_ATMPS 1
/*
* Macro to store the state of TIE coprocessor AudioEngineLX.
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 8 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters are the same as for xchal_ncp_store.
*/
#define xchal_cp_AudioEngineLX_store xchal_cp1_store
.macro xchal_cp1_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Custom caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 0, 8, 8
rur.AE_OVF_SAR \at1 // ureg 240
s32i \at1, \ptr, .Lxchal_ofs_+0
rur.AE_BITHEAD \at1 // ureg 241
s32i \at1, \ptr, .Lxchal_ofs_+4
rur.AE_TS_FTS_BU_BP \at1 // ureg 242
s32i \at1, \ptr, .Lxchal_ofs_+8
rur.AE_SD_NO \at1 // ureg 243
s32i \at1, \ptr, .Lxchal_ofs_+12
rur.AE_CBEGIN0 \at1 // ureg 246
s32i \at1, \ptr, .Lxchal_ofs_+16
rur.AE_CEND0 \at1 // ureg 247
s32i \at1, \ptr, .Lxchal_ofs_+20
ae_sp24x2s.i aep0, \ptr, .Lxchal_ofs_+24
ae_sp24x2s.i aep1, \ptr, .Lxchal_ofs_+32
ae_sp24x2s.i aep2, \ptr, .Lxchal_ofs_+40
ae_sp24x2s.i aep3, \ptr, .Lxchal_ofs_+48
ae_sp24x2s.i aep4, \ptr, .Lxchal_ofs_+56
addi \ptr, \ptr, 64
ae_sp24x2s.i aep5, \ptr, .Lxchal_ofs_+0
ae_sp24x2s.i aep6, \ptr, .Lxchal_ofs_+8
ae_sp24x2s.i aep7, \ptr, .Lxchal_ofs_+16
ae_sq56s.i aeq0, \ptr, .Lxchal_ofs_+24
ae_sq56s.i aeq1, \ptr, .Lxchal_ofs_+32
ae_sq56s.i aeq2, \ptr, .Lxchal_ofs_+40
ae_sq56s.i aeq3, \ptr, .Lxchal_ofs_+48
.set .Lxchal_pofs_, .Lxchal_pofs_ + 64
.set .Lxchal_ofs_, .Lxchal_ofs_ + 56
.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 0, 8, 8
.set .Lxchal_ofs_, .Lxchal_ofs_ + 120
.endif
.endm // xchal_cp1_store
/*
* Macro to load the state of TIE coprocessor AudioEngineLX.
* Required parameters:
* ptr Save area pointer address register (clobbered)
* (register must contain a 8 byte aligned address).
* at1..at4 Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
* registers are clobbered, the remaining are unused).
* Optional parameters are the same as for xchal_ncp_load.
*/
#define xchal_cp_AudioEngineLX_load xchal_cp1_load
.macro xchal_cp1_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
xchal_sa_start \continue, \ofs
// Custom caller-saved registers not used by default by the compiler:
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
xchal_sa_align \ptr, 0, 0, 8, 8
l32i \at1, \ptr, .Lxchal_ofs_+0
wur.AE_OVF_SAR \at1 // ureg 240
l32i \at1, \ptr, .Lxchal_ofs_+4
wur.AE_BITHEAD \at1 // ureg 241
l32i \at1, \ptr, .Lxchal_ofs_+8
wur.AE_TS_FTS_BU_BP \at1 // ureg 242
l32i \at1, \ptr, .Lxchal_ofs_+12
wur.AE_SD_NO \at1 // ureg 243
l32i \at1, \ptr, .Lxchal_ofs_+16
wur.AE_CBEGIN0 \at1 // ureg 246
l32i \at1, \ptr, .Lxchal_ofs_+20
wur.AE_CEND0 \at1 // ureg 247
ae_lp24x2.i aep0, \ptr, .Lxchal_ofs_+24
ae_lp24x2.i aep1, \ptr, .Lxchal_ofs_+32
ae_lp24x2.i aep2, \ptr, .Lxchal_ofs_+40
ae_lp24x2.i aep3, \ptr, .Lxchal_ofs_+48
ae_lp24x2.i aep4, \ptr, .Lxchal_ofs_+56
addi \ptr, \ptr, 64
ae_lp24x2.i aep5, \ptr, .Lxchal_ofs_+0
ae_lp24x2.i aep6, \ptr, .Lxchal_ofs_+8
ae_lp24x2.i aep7, \ptr, .Lxchal_ofs_+16
addi \ptr, \ptr, 24
ae_lq56.i aeq0, \ptr, .Lxchal_ofs_+0
ae_lq56.i aeq1, \ptr, .Lxchal_ofs_+8
ae_lq56.i aeq2, \ptr, .Lxchal_ofs_+16
ae_lq56.i aeq3, \ptr, .Lxchal_ofs_+24
.set .Lxchal_pofs_, .Lxchal_pofs_ + 88
.set .Lxchal_ofs_, .Lxchal_ofs_ + 32
.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
xchal_sa_align \ptr, 0, 0, 8, 8
.set .Lxchal_ofs_, .Lxchal_ofs_ + 120
.endif
.endm // xchal_cp1_load
#define XCHAL_CP1_NUM_ATMPS 1
#define XCHAL_SA_NUM_ATMPS 1
/* Empty macros for unconfigured coprocessors: */
.macro xchal_cp0_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp0_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
#endif /*_XTENSA_CORE_TIE_ASM_H*/
/*
* tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
*
* NOTE: This header file is not meant to be included directly.
*/
/* This header file describes this specific Xtensa processor's TIE extensions
that extend basic Xtensa core functionality. It is customized to this
Xtensa processor configuration.
Copyright (c) 1999-2015 Cadence Design Systems Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 2 /* number of coprocessors */
#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x82 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */
/* Basic parameters of each coprocessor: */
#define XCHAL_CP1_NAME "AudioEngineLX"
#define XCHAL_CP1_IDENT AudioEngineLX
#define XCHAL_CP1_SA_SIZE 120 /* size of state save area */
#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */
#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */
#define XCHAL_CP7_NAME "XTIOP"
#define XCHAL_CP7_IDENT XTIOP
#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_CP0_SA_SIZE 0
#define XCHAL_CP0_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 36
#define XCHAL_NCP_SA_ALIGN 4
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 160 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 8 /* actual minimum alignment */
/*
* Detailed contents of save areas.
* NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
* before expanding the XCHAL_xxx_SA_LIST() macros.
*
* XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
* dbnum,base,regnum,bitsz,gapsz,reset,x...)
*
* s = passed from XCHAL_*_LIST(s), eg. to select how to expand
* ccused = set if used by compiler without special options or code
* abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
* kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
* opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
* name = lowercase reg name (no quotes)
* galign = group byte alignment (power of 2) (galign >= align)
* align = register byte alignment (power of 2)
* asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
* (not including any pad bytes required to galign this or next reg)
* dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
* base = reg shortname w/o index (or sr=special, ur=TIE user reg)
* regnum = reg index in regfile, or special/TIE-user reg number
* bitsz = number of significant bits (regfile width, or ur/sr mask bits)
* gapsz = intervening bits, if bitsz bits not stored contiguously
* (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
* reset = register reset value (or 0 if undefined at reset)
* x = reserved for future use (0 until then)
*
* To filter out certain registers, e.g. to expand only the non-global
* registers used by the compiler, you can do something like this:
*
* #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
* #define SELCC0(p...)
* #define SELCC1(abikind,p...) SELAK##abikind(p)
* #define SELAK0(p...) REG(p)
* #define SELAK1(p...) REG(p)
* #define SELAK2(p...)
* #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
* ...what you want to expand...
*/
#define XCHAL_NCP_SA_NUM 9
#define XCHAL_NCP_SA_LIST(s) \
XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0)
#define XCHAL_CP0_SA_NUM 0
#define XCHAL_CP0_SA_LIST(s) /* empty */
#define XCHAL_CP1_SA_NUM 18
#define XCHAL_CP1_SA_LIST(s) \
XCHAL_SA_REG(s,0,0,1,0, ae_ovf_sar, 8, 4, 4,0x03F0, ur,240, 7,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ae_bithead, 4, 4, 4,0x03F1, ur,241, 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2, ur,242, 16,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ae_sd_no, 4, 4, 4,0x03F3, ur,243, 28,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ae_cbegin0, 4, 4, 4,0x03F6, ur,246, 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ae_cend0, 4, 4, 4,0x03F7, ur,247, 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep0, 8, 8, 8,0x0060, aep,0 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep1, 8, 8, 8,0x0061, aep,1 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep2, 8, 8, 8,0x0062, aep,2 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep3, 8, 8, 8,0x0063, aep,3 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep4, 8, 8, 8,0x0064, aep,4 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep5, 8, 8, 8,0x0065, aep,5 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep6, 8, 8, 8,0x0066, aep,6 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aep7, 8, 8, 8,0x0067, aep,7 , 48,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aeq0, 8, 8, 8,0x0068, aeq,0 , 56,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aeq1, 8, 8, 8,0x0069, aeq,1 , 56,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aeq2, 8, 8, 8,0x006A, aeq,2 , 56,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, aeq3, 8, 8, 8,0x006B, aeq,3 , 56,0,0,0)
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s) /* empty */
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s) /* empty */
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s) /* empty */
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s) /* empty */
#define XCHAL_CP6_SA_NUM 0
#define XCHAL_CP6_SA_LIST(s) /* empty */
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s) /* empty */
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8
/* Byte length of instruction from its first byte, per FLIX. */
#define XCHAL_BYTE0_FORMAT_LENGTHS \
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
#endif /*_XTENSA_CORE_TIE_H*/
...@@ -98,14 +98,12 @@ static void xtensa_mx_irq_unmask(struct irq_data *d) ...@@ -98,14 +98,12 @@ static void xtensa_mx_irq_unmask(struct irq_data *d)
static void xtensa_mx_irq_enable(struct irq_data *d) static void xtensa_mx_irq_enable(struct irq_data *d)
{ {
variant_irq_enable(d->hwirq);
xtensa_mx_irq_unmask(d); xtensa_mx_irq_unmask(d);
} }
static void xtensa_mx_irq_disable(struct irq_data *d) static void xtensa_mx_irq_disable(struct irq_data *d)
{ {
xtensa_mx_irq_mask(d); xtensa_mx_irq_mask(d);
variant_irq_disable(d->hwirq);
} }
static void xtensa_mx_irq_ack(struct irq_data *d) static void xtensa_mx_irq_ack(struct irq_data *d)
......
...@@ -55,14 +55,12 @@ static void xtensa_irq_unmask(struct irq_data *d) ...@@ -55,14 +55,12 @@ static void xtensa_irq_unmask(struct irq_data *d)
static void xtensa_irq_enable(struct irq_data *d) static void xtensa_irq_enable(struct irq_data *d)
{ {
variant_irq_enable(d->hwirq);
xtensa_irq_unmask(d); xtensa_irq_unmask(d);
} }
static void xtensa_irq_disable(struct irq_data *d) static void xtensa_irq_disable(struct irq_data *d)
{ {
xtensa_irq_mask(d); xtensa_irq_mask(d);
variant_irq_disable(d->hwirq);
} }
static void xtensa_irq_ack(struct irq_data *d) static void xtensa_irq_ack(struct irq_data *d)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment