Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: Add driver for the PMU on WM831x PMICs
  ds2760_battery: Fix integer overflow for time_to_empty_now
  wm97xx_battery: Convert to dev_pm_ops
  wm97xx_battery: Use irq to detect charger state
  wm97xx_battery: Use platform_data
  wm97xx-core: Pass platform_data to battery
  ds2760_battery: implement set_charged() feature
  power_supply: get_by_name and set_charged functionality
  power_supply: EXPORT_SYMBOL cleanups
  ds2760_battery: add current_accum module parameter
  ds2760_battery: handle full_active_uAh == 0 case correctly
  ds2760_battery: add rated_capacity module parameter
  ds2760_battery: export more features
  ds2760_battery: delay power supply registration
  wm8350_power: Implement charge type property
  power_supply: Add a charge_type property, and use it for olpc driver
  olpc_battery: Add an 'error' sysfs device that displays raw errors
  Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"

Documentation/power/power_supply_class.txt

@@ -76,6 +76,11 @@ STATUS - this attribute represents operating status (charging, full,
 discharging (i.e. powering a load), etc.). This corresponds to
 BATTERY_STATUS_* values, as defined in battery.h.
 
+CHARGE_TYPE - batteries can typically charge at different rates.
+This defines trickle and fast charges.  For batteries that
+are already charged or discharging, 'n/a' can be displayed (or
+'unknown', if the status is not known).
+
 HEALTH - represents health of the battery, values corresponds to
 POWER_SUPPLY_HEALTH_*, defined in battery.h.
 
@@ -108,6 +113,8 @@ relative, time-based measurements.
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
+CAPACITY_LEVEL - capacity level. This corresponds to
+POWER_SUPPLY_CAPACITY_LEVEL_*.
 
 TEMP - temperature of the power supply.
 TEMP_AMBIENT - ambient temperature.

drivers/input/touchscreen/wm97xx-core.c

@@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
 static int wm97xx_probe(struct device *dev)
 {
 	struct wm97xx *wm;
+	struct wm97xx_pdata *pdata = dev->platform_data;
 	int ret = 0, id = 0;
 
 	wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
@@ -658,6 +659,7 @@ static int wm97xx_probe(struct device *dev)
 	}
 	platform_set_drvdata(wm->battery_dev, wm);
 	wm->battery_dev->dev.parent = dev;
+	wm->battery_dev->dev.platform_data = pdata;
 	ret = platform_device_add(wm->battery_dev);
 	if (ret < 0)
 		goto batt_reg_err;
@@ -671,6 +673,7 @@ static int wm97xx_probe(struct device *dev)
 	}
 	platform_set_drvdata(wm->touch_dev, wm);
 	wm->touch_dev->dev.parent = dev;
+	wm->touch_dev->dev.platform_data = pdata;
 	ret = platform_device_add(wm->touch_dev);
 	if (ret < 0)
 		goto touch_reg_err;

drivers/power/Kconfig

@@ -29,6 +29,13 @@ config APM_POWER
 	  Say Y here to enable support APM status emulation using
 	  battery class devices.
 
+config WM831X_POWER
+	tristate "WM831X PMU support"
+	depends on MFD_WM831X
+	help
+	  Say Y here to enable support for the power management unit
+	  provided by Wolfson Microelectronics WM831x PMICs.
+
 config WM8350_POWER
         tristate "WM8350 PMU support"
         depends on MFD_WM8350

drivers/power/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY)	+= power_supply.o
 
 obj-$(CONFIG_PDA_POWER)		+= pda_power.o
 obj-$(CONFIG_APM_POWER)		+= apm_power.o
+obj-$(CONFIG_WM831X_POWER)	+= wm831x_power.o
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o

drivers/power/ds2760_battery.c

@@ -56,6 +56,7 @@ struct ds2760_device_info {
 	struct device *w1_dev;
 	struct workqueue_struct *monitor_wqueue;
 	struct delayed_work monitor_work;
+	struct delayed_work set_charged_work;
 };
 
 static unsigned int cache_time = 1000;
@@ -66,6 +67,14 @@ static unsigned int pmod_enabled;
 module_param(pmod_enabled, bool, 0644);
 MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
 
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
 static int rated_capacities[] = {
@@ -168,8 +177,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
 			      di->raw[DS2760_ACTIVE_FULL + 1];
 
-	scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 |
-		   di->raw[DS2760_ACTIVE_FULL + 1];
+	/* If the full_active_uAh value is not given, fall back to the rated
+	 * capacity. This is likely to happen when chips are not part of the
+	 * battery pack and is therefore not bootstrapped. */
+	if (di->full_active_uAh == 0)
+		di->full_active_uAh = di->rated_capacity / 1000L;
+
+	scale[0] = di->full_active_uAh;
 	for (i = 1; i < 5; i++)
 		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
 
@@ -197,15 +211,31 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	if (di->rem_capacity > 100)
 		di->rem_capacity = 100;
 
-	if (di->current_uA)
-		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) *
-				 3600L) / di->current_uA;
+	if (di->current_uA >= 100L)
+		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
+					/ (di->current_uA / 100L);
 	else
 		di->life_sec = 0;
 
 	return 0;
 }
 
+static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
+					     unsigned int acr_val)
+{
+	unsigned char acr[2];
+
+	/* acr is in units of 0.25 mAh */
+	acr_val *= 4L;
+	acr_val /= 1000;
+
+	acr[0] = acr_val >> 8;
+	acr[1] = acr_val & 0xff;
+
+	if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+		dev_warn(di->dev, "ACR write failed\n");
+}
+
 static void ds2760_battery_update_status(struct ds2760_device_info *di)
 {
 	int old_charge_status = di->charge_status;
@@ -237,21 +267,9 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)
 			if (di->full_counter < 2) {
 				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
 			} else {
-				unsigned char acr[2];
-				int acr_val;
-
-				/* acr is in units of 0.25 mAh */
-				acr_val = di->full_active_uAh * 4L / 1000;
-
-				acr[0] = acr_val >> 8;
-				acr[1] = acr_val & 0xff;
-
-				if (w1_ds2760_write(di->w1_dev, acr,
-				    DS2760_CURRENT_ACCUM_MSB, 2) < 2)
-					dev_warn(di->dev,
-						 "ACR reset failed\n");
-
 				di->charge_status = POWER_SUPPLY_STATUS_FULL;
+				ds2760_battery_set_current_accum(di,
+						di->full_active_uAh);
 			}
 		}
 	} else {
@@ -274,6 +292,17 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
 	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
 }
 
+static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
+						unsigned char rated_capacity)
+{
+	if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
+		return;
+
+	w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+}
+
 static void ds2760_battery_work(struct work_struct *work)
 {
 	struct ds2760_device_info *di = container_of(work,
@@ -299,6 +328,52 @@ static void ds2760_battery_external_power_changed(struct power_supply *psy)
 	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
 }
 
+
+static void ds2760_battery_set_charged_work(struct work_struct *work)
+{
+	char bias;
+	struct ds2760_device_info *di = container_of(work,
+		struct ds2760_device_info, set_charged_work.work);
+
+	dev_dbg(di->dev, "%s\n", __func__);
+
+	ds2760_battery_read_status(di);
+
+	/* When we get notified by external circuitry that the battery is
+	 * considered fully charged now, we know that there is no current
+	 * flow any more. However, the ds2760's internal current meter is
+	 * too inaccurate to rely on - spec say something ~15% failure.
+	 * Hence, we use the current offset bias register to compensate
+	 * that error.
+	 */
+
+	if (!power_supply_am_i_supplied(&di->bat))
+		return;
+
+	bias = (signed char) di->current_raw +
+		(signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
+
+	dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
+
+	w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+
+	/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
+	 * value won't be read back by ds2760_battery_read_status() */
+	di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
+}
+
+static void ds2760_battery_set_charged(struct power_supply *psy)
+{
+	struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+	/* postpone the actual work by 20 secs. This is for debouncing GPIO
+	 * signals and to let the current value settle. See AN4188. */
+	cancel_delayed_work(&di->set_charged_work);
+	queue_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
+}
+
 static int ds2760_battery_get_property(struct power_supply *psy,
 				       enum power_supply_property psp,
 				       union power_supply_propval *val)
@@ -337,6 +412,12 @@ static int ds2760_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TEMP:
 		val->intval = di->temp_C;
 		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		val->intval = di->life_sec;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = di->rem_capacity;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -353,6 +434,8 @@ static enum power_supply_property ds2760_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
 };
 
 static int ds2760_battery_probe(struct platform_device *pdev)
@@ -376,17 +459,12 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	di->bat.properties	= ds2760_battery_props;
 	di->bat.num_properties	= ARRAY_SIZE(ds2760_battery_props);
 	di->bat.get_property	= ds2760_battery_get_property;
+	di->bat.set_charged	= ds2760_battery_set_charged;
 	di->bat.external_power_changed =
 				  ds2760_battery_external_power_changed;
 
 	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
 
-	retval = power_supply_register(&pdev->dev, &di->bat);
-	if (retval) {
-		dev_err(di->dev, "failed to register battery\n");
-		goto batt_failed;
-	}
-
 	/* enable sleep mode feature */
 	ds2760_battery_read_status(di);
 	status = di->raw[DS2760_STATUS_REG];
@@ -397,7 +475,24 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 
 	ds2760_battery_write_status(di, status);
 
+	/* set rated capacity from module param */
+	if (rated_capacity)
+		ds2760_battery_write_rated_capacity(di, rated_capacity);
+
+	/* set current accumulator if given as parameter.
+	 * this should only be done for bootstrapping the value */
+	if (current_accum)
+		ds2760_battery_set_current_accum(di, current_accum);
+
+	retval = power_supply_register(&pdev->dev, &di->bat);
+	if (retval) {
+		dev_err(di->dev, "failed to register battery\n");
+		goto batt_failed;
+	}
+
 	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+	INIT_DELAYED_WORK(&di->set_charged_work,
+			  ds2760_battery_set_charged_work);
 	di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
 	if (!di->monitor_wqueue) {
 		retval = -ESRCH;
@@ -422,6 +517,8 @@ static int ds2760_battery_remove(struct platform_device *pdev)
 
 	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
 					  &di->monitor_work);
+	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
+					  &di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(&di->bat);
 

drivers/power/olpc_battery.c

@@ -10,7 +10,9 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/types.h>
 #include <linux/err.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/jiffies.h>
@@ -231,6 +233,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (ec_byte & BAT_STAT_TRICKLE)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		else if (ec_byte & BAT_STAT_CHARGING)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
 					    BAT_STAT_TRICKLE));
@@ -276,6 +286,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		val->intval = ec_byte;
 		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (ec_byte & BAT_STAT_LOW)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
 	case POWER_SUPPLY_PROP_TEMP:
 		ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
@@ -315,12 +333,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
 
 static enum power_supply_property olpc_bat_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_VOLTAGE_AVG,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
 	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
@@ -370,6 +390,29 @@ static struct bin_attribute olpc_bat_eeprom = {
 	.read = olpc_bat_eeprom_read,
 };
 
+/* Allow userspace to see the specific error value pulled from the EC */
+
+static ssize_t olpc_bat_error_read(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	uint8_t ec_byte;
+	ssize_t ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ec_byte);
+}
+
+static struct device_attribute olpc_bat_error = {
+	.attr = {
+		.name = "error",
+		.mode = S_IRUGO,
+	},
+	.show = olpc_bat_error_read,
+};
+
 /*********************************************************************
  *		Initialisation
  *********************************************************************/
@@ -433,8 +476,14 @@ static int __init olpc_bat_init(void)
 	if (ret)
 		goto eeprom_failed;
 
+	ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
+	if (ret)
+		goto error_failed;
+
 	goto success;
 
+error_failed:
+	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 eeprom_failed:
 	power_supply_unregister(&olpc_bat);
 battery_failed:
@@ -447,6 +496,7 @@ static int __init olpc_bat_init(void)
 
 static void __exit olpc_bat_exit(void)
 {
+	device_remove_file(olpc_bat.dev, &olpc_bat_error);
 	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 	power_supply_unregister(&olpc_bat);
 	power_supply_unregister(&olpc_ac);

drivers/power/power_supply_core.c

@@ -18,7 +18,9 @@
 #include <linux/power_supply.h>
 #include "power_supply.h"
 
+/* exported for the APM Power driver, APM emulation */
 struct class *power_supply_class;
+EXPORT_SYMBOL_GPL(power_supply_class);
 
 static int __power_supply_changed_work(struct device *dev, void *data)
 {
@@ -55,6 +57,7 @@ void power_supply_changed(struct power_supply *psy)
 
 	schedule_work(&psy->changed_work);
 }
+EXPORT_SYMBOL_GPL(power_supply_changed);
 
 static int __power_supply_am_i_supplied(struct device *dev, void *data)
 {
@@ -86,6 +89,7 @@ int power_supply_am_i_supplied(struct power_supply *psy)
 
 	return error;
 }
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
 
 static int __power_supply_is_system_supplied(struct device *dev, void *data)
 {
@@ -110,6 +114,35 @@ int power_supply_is_system_supplied(void)
 
 	return error;
 }
+EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
+
+int power_supply_set_battery_charged(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) {
+		psy->set_charged(psy);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
+
+static int power_supply_match_device_by_name(struct device *dev, void *data)
+{
+	const char *name = data;
+	struct power_supply *psy = dev_get_drvdata(dev);
+
+	return strcmp(psy->name, name) == 0;
+}
+
+struct power_supply *power_supply_get_by_name(char *name)
+{
+	struct device *dev = class_find_device(power_supply_class, NULL, name,
+					power_supply_match_device_by_name);
+
+	return dev ? dev_get_drvdata(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_name);
 
 int power_supply_register(struct device *parent, struct power_supply *psy)
 {
@@ -144,6 +177,7 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
 success:
 	return rc;
 }
+EXPORT_SYMBOL_GPL(power_supply_register);
 
 void power_supply_unregister(struct power_supply *psy)
 {
@@ -152,6 +186,7 @@ void power_supply_unregister(struct power_supply *psy)
 	power_supply_remove_attrs(psy);
 	device_unregister(psy->dev);
 }
+EXPORT_SYMBOL_GPL(power_supply_unregister);
 
 static int __init power_supply_class_init(void)
 {
@@ -170,15 +205,6 @@ static void __exit power_supply_class_exit(void)
 	class_destroy(power_supply_class);
 }
 
-EXPORT_SYMBOL_GPL(power_supply_changed);
-EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
-EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
-EXPORT_SYMBOL_GPL(power_supply_register);
-EXPORT_SYMBOL_GPL(power_supply_unregister);
-
-/* exported for the APM Power driver, APM emulation */
-EXPORT_SYMBOL_GPL(power_supply_class);
-
 subsys_initcall(power_supply_class_init);
 module_exit(power_supply_class_exit);
 

drivers/power/power_supply_sysfs.c

@@ -43,6 +43,9 @@ static ssize_t power_supply_show_property(struct device *dev,
 	static char *status_text[] = {
 		"Unknown", "Charging", "Discharging", "Not charging", "Full"
 	};
+	static char *charge_type[] = {
+		"Unknown", "N/A", "Trickle", "Fast"
+	};
 	static char *health_text[] = {
 		"Unknown", "Good", "Overheat", "Dead", "Over voltage",
 		"Unspecified failure", "Cold",
@@ -51,6 +54,9 @@ static ssize_t power_supply_show_property(struct device *dev,
 		"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
 		"LiMn"
 	};
+	static char *capacity_level_text[] = {
+		"Unknown", "Critical", "Low", "Normal", "High", "Full"
+	};
 	ssize_t ret;
 	struct power_supply *psy = dev_get_drvdata(dev);
 	const ptrdiff_t off = attr - power_supply_attrs;
@@ -67,10 +73,14 @@ static ssize_t power_supply_show_property(struct device *dev,
 
 	if (off == POWER_SUPPLY_PROP_STATUS)
 		return sprintf(buf, "%s\n", status_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE)
+		return sprintf(buf, "%s\n", charge_type[value.intval]);
 	else if (off == POWER_SUPPLY_PROP_HEALTH)
 		return sprintf(buf, "%s\n", health_text[value.intval]);
 	else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
 		return sprintf(buf, "%s\n", technology_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
+		return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
 	else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
 		return sprintf(buf, "%s\n", value.strval);
 
@@ -81,6 +91,7 @@ static ssize_t power_supply_show_property(struct device *dev,
 static struct device_attribute power_supply_attrs[] = {
 	/* Properties of type `int' */
 	POWER_SUPPLY_ATTR(status),
+	POWER_SUPPLY_ATTR(charge_type),
 	POWER_SUPPLY_ATTR(health),
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
@@ -109,6 +120,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(energy_now),
 	POWER_SUPPLY_ATTR(energy_avg),
 	POWER_SUPPLY_ATTR(capacity),
+	POWER_SUPPLY_ATTR(capacity_level),
 	POWER_SUPPLY_ATTR(temp),
 	POWER_SUPPLY_ATTR(temp_ambient),
 	POWER_SUPPLY_ATTR(time_to_empty_now),

drivers/power/wm831x_power.c

+/*
+ * PMU driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_power {
+	struct wm831x *wm831x;
+	struct power_supply wall;
+	struct power_supply backup;
+	struct power_supply usb;
+	struct power_supply battery;
+};
+
+static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
+				     union power_supply_propval *val)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & supply)
+		val->intval = 1;
+	else
+		val->intval = 0;
+
+	return 0;
+}
+
+static int wm831x_power_read_voltage(struct wm831x *wm831x,
+				     enum wm831x_auxadc src,
+				     union power_supply_propval *val)
+{
+	int ret;
+
+	ret = wm831x_auxadc_read_uv(wm831x, src);
+	if (ret >= 0)
+		val->intval = ret;
+
+	return ret;
+}
+
+/*********************************************************************
+ *		WALL Power
+ *********************************************************************/
+static int wm831x_wall_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_wall_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ *		USB Power
+ *********************************************************************/
+static int wm831x_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+struct chg_map {
+	int val;
+	int reg_val;
+};
+
+static struct chg_map trickle_ilims[] = {
+	{  50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
+};
+
+static struct chg_map vsels[] = {
+	{ 4050, 0 << WM831X_CHG_VSEL_SHIFT },
+	{ 4100, 1 << WM831X_CHG_VSEL_SHIFT },
+	{ 4150, 2 << WM831X_CHG_VSEL_SHIFT },
+	{ 4200, 3 << WM831X_CHG_VSEL_SHIFT },
+};
+
+static struct chg_map fast_ilims[] = {
+	{    0,  0 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{   50,  1 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  100,  2 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  150,  3 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  200,  4 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  250,  5 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  300,  6 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  350,  7 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  400,  8 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  450,  9 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{ 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
+};
+
+static struct chg_map eoc_iterms[] = {
+	{ 20, 0 << WM831X_CHG_ITERM_SHIFT },
+	{ 30, 1 << WM831X_CHG_ITERM_SHIFT },
+	{ 40, 2 << WM831X_CHG_ITERM_SHIFT },
+	{ 50, 3 << WM831X_CHG_ITERM_SHIFT },
+	{ 60, 4 << WM831X_CHG_ITERM_SHIFT },
+	{ 70, 5 << WM831X_CHG_ITERM_SHIFT },
+	{ 80, 6 << WM831X_CHG_ITERM_SHIFT },
+	{ 90, 7 << WM831X_CHG_ITERM_SHIFT },
+};
+
+static struct chg_map chg_times[] = {
+	{  60,  0 << WM831X_CHG_TIME_SHIFT },
+	{  90,  1 << WM831X_CHG_TIME_SHIFT },
+	{ 120,  2 << WM831X_CHG_TIME_SHIFT },
+	{ 150,  3 << WM831X_CHG_TIME_SHIFT },
+	{ 180,  4 << WM831X_CHG_TIME_SHIFT },
+	{ 210,  5 << WM831X_CHG_TIME_SHIFT },
+	{ 240,  6 << WM831X_CHG_TIME_SHIFT },
+	{ 270,  7 << WM831X_CHG_TIME_SHIFT },
+	{ 300,  8 << WM831X_CHG_TIME_SHIFT },
+	{ 330,  9 << WM831X_CHG_TIME_SHIFT },
+	{ 360, 10 << WM831X_CHG_TIME_SHIFT },
+	{ 390, 11 << WM831X_CHG_TIME_SHIFT },
+	{ 420, 12 << WM831X_CHG_TIME_SHIFT },
+	{ 450, 13 << WM831X_CHG_TIME_SHIFT },
+	{ 480, 14 << WM831X_CHG_TIME_SHIFT },
+	{ 510, 15 << WM831X_CHG_TIME_SHIFT },
+};
+
+static void wm831x_battey_apply_config(struct wm831x *wm831x,
+				       struct chg_map *map, int count, int val,
+				       int *reg, const char *name,
+				       const char *units)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		if (val == map[i].val)
+			break;
+	if (i == count) {
+		dev_err(wm831x->dev, "Invalid %s %d%s\n",
+			name, val, units);
+	} else {
+		*reg |= map[i].reg_val;
+		dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
+	}
+}
+
+static void wm831x_config_battery(struct wm831x *wm831x)
+{
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_battery_pdata *pdata;
+	int ret, reg1, reg2;
+
+	if (!wm831x_pdata || !wm831x_pdata->battery) {
+		dev_warn(wm831x->dev,
+			 "No battery charger configuration\n");
+		return;
+	}
+
+	pdata = wm831x_pdata->battery;
+
+	reg1 = 0;
+	reg2 = 0;
+
+	if (!pdata->enable) {
+		dev_info(wm831x->dev, "Battery charger disabled\n");
+		return;
+	}
+
+	reg1 |= WM831X_CHG_ENA;
+	if (pdata->off_mask)
+		reg2 |= WM831X_CHG_OFF_MSK;
+	if (pdata->fast_enable)
+		reg1 |= WM831X_CHG_FAST;
+
+	wm831x_battey_apply_config(wm831x, trickle_ilims,
+				   ARRAY_SIZE(trickle_ilims),
+				   pdata->trickle_ilim, &reg2,
+				   "trickle charge current limit", "mA");
+
+	wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
+				   pdata->vsel, &reg2,
+				   "target voltage", "mV");
+
+	wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
+				   pdata->fast_ilim, &reg2,
+				   "fast charge current limit", "mA");
+
+	wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
+				   pdata->eoc_iterm, &reg1,
+				   "end of charge current threshold", "mA");
+
+	wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
+				   pdata->timeout, &reg2,
+				   "charger timeout", "min");
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
+			      WM831X_CHG_ENA_MASK |
+			      WM831X_CHG_FAST_MASK |
+			      WM831X_CHG_ITERM_MASK |
+			      WM831X_CHG_ITERM_MASK,
+			      reg1);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
+			ret);
+
+	ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
+			      WM831X_CHG_OFF_MSK |
+			      WM831X_CHG_TIME_MASK |
+			      WM831X_CHG_FAST_ILIM_MASK |
+			      WM831X_CHG_TRKL_ILIM_MASK |
+			      WM831X_CHG_VSEL_MASK,
+			      reg2);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
+			ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & WM831X_PWR_SRC_BATT) {
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_OFF:
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case WM831X_CHG_STATE_TRICKLE:
+	case WM831X_CHG_STATE_FAST:
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+
+	default:
+		*status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_TRICKLE:
+	case WM831X_CHG_STATE_TRICKLE_OT:
+		*type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case WM831X_CHG_STATE_FAST:
+	case WM831X_CHG_STATE_FAST_OT:
+		*type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	default:
+		*type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & WM831X_BATT_HOT_STS) {
+		*health = POWER_SUPPLY_HEALTH_OVERHEAT;
+		return 0;
+	}
+
+	if (ret & WM831X_BATT_COLD_STS) {
+		*health = POWER_SUPPLY_HEALTH_COLD;
+		return 0;
+	}
+
+	if (ret & WM831X_BATT_OV_STS) {
+		*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		return 0;
+	}
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_TRICKLE_OT:
+	case WM831X_CHG_STATE_FAST_OT:
+		*health = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+	case WM831X_CHG_STATE_DEFECTIVE:
+		*health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	default:
+		*health = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = wm831x_bat_check_status(wm831x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
+						val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = wm831x_bat_check_health(wm831x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = wm831x_bat_check_type(wm831x, &val->intval);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const char *wm831x_bat_irqs[] = {
+	"BATT HOT",
+	"BATT COLD",
+	"BATT FAIL",
+	"OV",
+	"END",
+	"TO",
+	"MODE",
+	"START",
+};
+
+static irqreturn_t wm831x_bat_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
+
+	/* The battery charger is autonomous so we don't need to do
+	 * anything except kick user space */
+	power_supply_changed(&wm831x_power->battery);
+
+	return IRQ_HANDLED;
+}
+
+
+/*********************************************************************
+ *		Backup supply properties
+ *********************************************************************/
+
+static void wm831x_config_backup(struct wm831x *wm831x)
+{
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_backup_pdata *pdata;
+	int ret, reg;
+
+	if (!wm831x_pdata || !wm831x_pdata->backup) {
+		dev_warn(wm831x->dev,
+			 "No backup battery charger configuration\n");
+		return;
+	}
+
+	pdata = wm831x_pdata->backup;
+
+	reg = 0;
+
+	if (pdata->charger_enable)
+		reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
+	if (pdata->no_constant_voltage)
+		reg |= WM831X_BKUP_CHG_MODE;
+
+	switch (pdata->vlim) {
+	case 2500:
+		break;
+	case 3100:
+		reg |= WM831X_BKUP_CHG_VLIM;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
+			pdata->vlim);
+	}
+
+	switch (pdata->ilim) {
+	case 100:
+		break;
+	case 200:
+		reg |= 1;
+		break;
+	case 300:
+		reg |= 2;
+		break;
+	case 400:
+		reg |= 3;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
+			pdata->ilim);
+	}
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
+			      WM831X_BKUP_CHG_ENA_MASK |
+			      WM831X_BKUP_CHG_MODE_MASK |
+			      WM831X_BKUP_BATT_DET_ENA_MASK |
+			      WM831X_BKUP_CHG_VLIM_MASK |
+			      WM831X_BKUP_CHG_ILIM_MASK,
+			      reg);
+	if (ret != 0)
+		dev_err(wm831x->dev,
+			"Failed to set backup charger config: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_backup_get_prop(struct power_supply *psy,
+				  enum power_supply_property psp,
+				  union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (ret & WM831X_BKUP_CHG_STS)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
+						val);
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (ret & WM831X_BKUP_CHG_STS)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_backup_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static irqreturn_t wm831x_syslo_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	/* Not much we can actually *do* but tell people for
+	 * posterity, we're probably about to run out of power. */
+	dev_crit(wm831x->dev, "SYSVDD under voltage\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	dev_dbg(wm831x->dev, "Power source changed\n");
+
+	/* Just notify for everything - little harm in overnotifying.
+	 * The backup battery is not a power source while the system
+	 * is running so skip that.
+	 */
+	power_supply_changed(&wm831x_power->battery);
+	power_supply_changed(&wm831x_power->usb);
+	power_supply_changed(&wm831x_power->wall);
+
+	return IRQ_HANDLED;
+}
+
+static __devinit int wm831x_power_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_power *power;
+	struct power_supply *usb;
+	struct power_supply *battery;
+	struct power_supply *wall;
+	struct power_supply *backup;
+	int ret, irq, i;
+
+	power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
+	if (power == NULL)
+		return -ENOMEM;
+
+	power->wm831x = wm831x;
+	platform_set_drvdata(pdev, power);
+
+	usb = &power->usb;
+	battery = &power->battery;
+	wall = &power->wall;
+	backup = &power->backup;
+
+	/* We ignore configuration failures since we can still read back
+	 * the status without enabling either of the chargers.
+	 */
+	wm831x_config_battery(wm831x);
+	wm831x_config_backup(wm831x);
+
+	wall->name = "wm831x-wall";
+	wall->type = POWER_SUPPLY_TYPE_MAINS;
+	wall->properties = wm831x_wall_props;
+	wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
+	wall->get_property = wm831x_wall_get_prop;
+	ret = power_supply_register(&pdev->dev, wall);
+	if (ret)
+		goto err_kmalloc;
+
+	battery->name = "wm831x-battery";
+	battery->properties = wm831x_bat_props;
+	battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
+	battery->get_property = wm831x_bat_get_prop;
+	battery->use_for_apm = 1;
+	ret = power_supply_register(&pdev->dev, battery);
+	if (ret)
+		goto err_wall;
+
+	usb->name = "wm831x-usb",
+	usb->type = POWER_SUPPLY_TYPE_USB;
+	usb->properties = wm831x_usb_props;
+	usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
+	usb->get_property = wm831x_usb_get_prop;
+	ret = power_supply_register(&pdev->dev, usb);
+	if (ret)
+		goto err_battery;
+
+	backup->name = "wm831x-backup";
+	backup->type = POWER_SUPPLY_TYPE_BATTERY;
+	backup->properties = wm831x_backup_props;
+	backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
+	backup->get_property = wm831x_backup_get_prop;
+	ret = power_supply_register(&pdev->dev, backup);
+	if (ret)
+		goto err_usb;
+
+	irq = platform_get_irq_byname(pdev, "SYSLO");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
+				 IRQF_TRIGGER_RISING, "SYSLO",
+				 power);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
+			irq, ret);
+		goto err_backup;
+	}
+
+	irq = platform_get_irq_byname(pdev, "PWR SRC");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq,
+				 IRQF_TRIGGER_RISING, "Power source",
+				 power);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
+			irq, ret);
+		goto err_syslo;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+		irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+		ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq,
+					 IRQF_TRIGGER_RISING,
+					 wm831x_bat_irqs[i],
+					 power);
+		if (ret != 0) {
+			dev_err(&pdev->dev,
+				"Failed to request %s IRQ %d: %d\n",
+				wm831x_bat_irqs[i], irq, ret);
+			goto err_bat_irq;
+		}
+	}
+
+	return ret;
+
+err_bat_irq:
+	for (; i >= 0; i--) {
+		irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+		wm831x_free_irq(wm831x, irq, power);
+	}
+	irq = platform_get_irq_byname(pdev, "PWR SRC");
+	wm831x_free_irq(wm831x, irq, power);
+err_syslo:
+	irq = platform_get_irq_byname(pdev, "SYSLO");
+	wm831x_free_irq(wm831x, irq, power);
+err_backup:
+	power_supply_unregister(backup);
+err_usb:
+	power_supply_unregister(usb);
+err_battery:
+	power_supply_unregister(battery);
+err_wall:
+	power_supply_unregister(wall);
+err_kmalloc:
+	kfree(power);
+	return ret;
+}
+
+static __devexit int wm831x_power_remove(struct platform_device *pdev)
+{
+	struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int irq, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+		irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+		wm831x_free_irq(wm831x, irq, wm831x_power);
+	}
+
+	irq = platform_get_irq_byname(pdev, "PWR SRC");
+	wm831x_free_irq(wm831x, irq, wm831x_power);
+
+	irq = platform_get_irq_byname(pdev, "SYSLO");
+	wm831x_free_irq(wm831x, irq, wm831x_power);
+
+	power_supply_unregister(&wm831x_power->backup);
+	power_supply_unregister(&wm831x_power->battery);
+	power_supply_unregister(&wm831x_power->wall);
+	power_supply_unregister(&wm831x_power->usb);
+	return 0;
+}
+
+static struct platform_driver wm831x_power_driver = {
+	.probe = wm831x_power_probe,
+	.remove = __devexit_p(wm831x_power_remove),
+	.driver = {
+		.name = "wm831x-power",
+	},
+};
+
+static int __init wm831x_power_init(void)
+{
+	return platform_driver_register(&wm831x_power_driver);
+}
+module_init(wm831x_power_init);
+
+static void __exit wm831x_power_exit(void)
+{
+	platform_driver_unregister(&wm831x_power_driver);
+}
+module_exit(wm831x_power_exit);
+
+MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-power");

drivers/power/wm8350_power.c

@@ -321,6 +321,24 @@ static int wm8350_bat_check_health(struct wm8350 *wm8350)
 	return POWER_SUPPLY_HEALTH_GOOD;
 }
 
+static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
+{
+	int state;
+
+	state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+	    WM8350_CHG_STS_MASK;
+	switch (state) {
+	case WM8350_CHG_STS_OFF:
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+	case WM8350_CHG_STS_TRICKLE:
+		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	case WM8350_CHG_STS_FAST:
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+	default:
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+}
+
 static int wm8350_bat_get_property(struct power_supply *psy,
 				   enum power_supply_property psp,
 				   union power_supply_propval *val)
@@ -342,6 +360,9 @@ static int wm8350_bat_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_HEALTH:
 		val->intval = wm8350_bat_check_health(wm8350);
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = wm8350_bat_get_charge_type(wm8350);
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -355,6 +376,7 @@ static enum power_supply_property wm8350_bat_props[] = {
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
 };
 
 /*********************************************************************

drivers/power/wm97xx_battery.c

@@ -22,17 +22,20 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/irq.h>
 
 static DEFINE_MUTEX(bat_lock);
 static struct work_struct bat_work;
 struct mutex work_lock;
 static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *pdata;
+static struct wm97xx_batt_info *gpdata;
 static enum power_supply_property *prop;
 
 static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
 {
+	struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+	struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
 	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
 					pdata->batt_aux) * pdata->batt_mult /
 					pdata->batt_div;
@@ -40,6 +43,9 @@ static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
 
 static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
 {
+	struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+	struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
 	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
 					pdata->temp_aux) * pdata->temp_mult /
 					pdata->temp_div;
@@ -49,6 +55,9 @@ static int wm97xx_bat_get_property(struct power_supply *bat_ps,
 			    enum power_supply_property psp,
 			    union power_supply_propval *val)
 {
+	struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+	struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		val->intval = bat_status;
@@ -97,6 +106,8 @@ static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
 static void wm97xx_bat_update(struct power_supply *bat_ps)
 {
 	int old_status = bat_status;
+	struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+	struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
 
 	mutex_lock(&work_lock);
 
@@ -127,21 +138,29 @@ static void wm97xx_bat_work(struct work_struct *work)
 	wm97xx_bat_update(&bat_ps);
 }
 
+static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
+{
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
 #ifdef CONFIG_PM
-static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
+static int wm97xx_bat_suspend(struct device *dev)
 {
 	flush_scheduled_work();
 	return 0;
 }
 
-static int wm97xx_bat_resume(struct platform_device *dev)
+static int wm97xx_bat_resume(struct device *dev)
 {
 	schedule_work(&bat_work);
 	return 0;
 }
-#else
-#define wm97xx_bat_suspend NULL
-#define wm97xx_bat_resume NULL
+
+static struct dev_pm_ops wm97xx_bat_pm_ops = {
+	.suspend	= wm97xx_bat_suspend,
+	.resume		= wm97xx_bat_resume,
+};
 #endif
 
 static int __devinit wm97xx_bat_probe(struct platform_device *dev)
@@ -149,6 +168,15 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 	int ret = 0;
 	int props = 1;	/* POWER_SUPPLY_PROP_PRESENT */
 	int i = 0;
+	struct wm97xx_pdata *wmdata = dev->dev.platform_data;
+	struct wm97xx_batt_pdata *pdata;
+
+	if (gpdata) {
+		dev_err(&dev->dev, "Do not pass platform_data through "
+			"wm97xx_bat_set_pdata!\n");
+		return -EINVAL;
+	} else
+		pdata = wmdata->batt_pdata;
 
 	if (dev->id != -1)
 		return -EINVAL;
@@ -156,15 +184,20 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 	mutex_init(&work_lock);
 
 	if (!pdata) {
-		dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+		dev_err(&dev->dev, "No platform_data supplied\n");
 		return -EINVAL;
 	}
 
-	if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
+	if (gpio_is_valid(pdata->charge_gpio)) {
 		ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
 		if (ret)
 			goto err;
 		ret = gpio_direction_input(pdata->charge_gpio);
+		if (ret)
+			goto err2;
+		ret = request_irq(gpio_to_irq(pdata->charge_gpio),
+				wm97xx_chrg_irq, IRQF_DISABLED,
+				"AC Detect", 0);
 		if (ret)
 			goto err2;
 		props++;	/* POWER_SUPPLY_PROP_STATUS */
@@ -183,7 +216,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 
 	prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
 	if (!prop)
-		goto err2;
+		goto err3;
 
 	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
 	if (pdata->charge_gpio >= 0)
@@ -216,12 +249,16 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 	if (!ret)
 		schedule_work(&bat_work);
 	else
-		goto err3;
+		goto err4;
 
 	return 0;
-err3:
+err4:
 	kfree(prop);
+err3:
+	if (gpio_is_valid(pdata->charge_gpio))
+		free_irq(gpio_to_irq(pdata->charge_gpio), dev);
 err2:
+	if (gpio_is_valid(pdata->charge_gpio))
 		gpio_free(pdata->charge_gpio);
 err:
 	return ret;
@@ -229,8 +266,13 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 
 static int __devexit wm97xx_bat_remove(struct platform_device *dev)
 {
-	if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
+	struct wm97xx_pdata *wmdata = dev->dev.platform_data;
+	struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
+	if (pdata && gpio_is_valid(pdata->charge_gpio)) {
+		free_irq(gpio_to_irq(pdata->charge_gpio), dev);
 		gpio_free(pdata->charge_gpio);
+	}
 	flush_scheduled_work();
 	power_supply_unregister(&bat_ps);
 	kfree(prop);
@@ -241,11 +283,12 @@ static struct platform_driver wm97xx_bat_driver = {
 	.driver	= {
 		.name	= "wm97xx-battery",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &wm97xx_bat_pm_ops,
+#endif
 	},
 	.probe		= wm97xx_bat_probe,
 	.remove		= __devexit_p(wm97xx_bat_remove),
-	.suspend	= wm97xx_bat_suspend,
-	.resume		= wm97xx_bat_resume,
 };
 
 static int __init wm97xx_bat_init(void)
@@ -258,9 +301,9 @@ static void __exit wm97xx_bat_exit(void)
 	platform_driver_unregister(&wm97xx_bat_driver);
 }
 
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
+void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
 {
-	pdata = data;
+	gpdata = data;
 }
 EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
 

include/linux/mfd/wm831x/pmu.h

+/*
+ * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PMU_H__
+#define __MFD_WM831X_PMU_H__
+
+/*
+ * R16387 (0x4003) - Power State
+ */
+#define WM831X_CHIP_ON                          0x8000  /* CHIP_ON */
+#define WM831X_CHIP_ON_MASK                     0x8000  /* CHIP_ON */
+#define WM831X_CHIP_ON_SHIFT                        15  /* CHIP_ON */
+#define WM831X_CHIP_ON_WIDTH                         1  /* CHIP_ON */
+#define WM831X_CHIP_SLP                         0x4000  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_MASK                    0x4000  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_SHIFT                       14  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_WIDTH                        1  /* CHIP_SLP */
+#define WM831X_REF_LP                           0x1000  /* REF_LP */
+#define WM831X_REF_LP_MASK                      0x1000  /* REF_LP */
+#define WM831X_REF_LP_SHIFT                         12  /* REF_LP */
+#define WM831X_REF_LP_WIDTH                          1  /* REF_LP */
+#define WM831X_PWRSTATE_DLY_MASK                0x0C00  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_SHIFT                   10  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_WIDTH                    2  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_SWRST_DLY                        0x0200  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_MASK                   0x0200  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_SHIFT                       9  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_WIDTH                       1  /* SWRST_DLY */
+#define WM831X_USB100MA_STARTUP_MASK            0x0030  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_SHIFT                4  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_WIDTH                2  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB_CURR_STS                     0x0008  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_MASK                0x0008  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_SHIFT                    3  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_WIDTH                    1  /* USB_CURR_STS */
+#define WM831X_USB_ILIM_MASK                    0x0007  /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_SHIFT                        0  /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_WIDTH                        3  /* USB_ILIM - [2:0] */
+
+/*
+ * R16397 (0x400D) - System Status
+ */
+#define WM831X_THW_STS                          0x8000  /* THW_STS */
+#define WM831X_THW_STS_MASK                     0x8000  /* THW_STS */
+#define WM831X_THW_STS_SHIFT                        15  /* THW_STS */
+#define WM831X_THW_STS_WIDTH                         1  /* THW_STS */
+#define WM831X_PWR_SRC_BATT                     0x0400  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_MASK                0x0400  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_SHIFT                   10  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_WIDTH                    1  /* PWR_SRC_BATT */
+#define WM831X_PWR_WALL                         0x0200  /* PWR_WALL */
+#define WM831X_PWR_WALL_MASK                    0x0200  /* PWR_WALL */
+#define WM831X_PWR_WALL_SHIFT                        9  /* PWR_WALL */
+#define WM831X_PWR_WALL_WIDTH                        1  /* PWR_WALL */
+#define WM831X_PWR_USB                          0x0100  /* PWR_USB */
+#define WM831X_PWR_USB_MASK                     0x0100  /* PWR_USB */
+#define WM831X_PWR_USB_SHIFT                         8  /* PWR_USB */
+#define WM831X_PWR_USB_WIDTH                         1  /* PWR_USB */
+#define WM831X_MAIN_STATE_MASK                  0x001F  /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_SHIFT                      0  /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_WIDTH                      5  /* MAIN_STATE - [4:0] */
+
+/*
+ * R16456 (0x4048) - Charger Control 1
+ */
+#define WM831X_CHG_ENA                          0x8000  /* CHG_ENA */
+#define WM831X_CHG_ENA_MASK                     0x8000  /* CHG_ENA */
+#define WM831X_CHG_ENA_SHIFT                        15  /* CHG_ENA */
+#define WM831X_CHG_ENA_WIDTH                         1  /* CHG_ENA */
+#define WM831X_CHG_FRC                          0x4000  /* CHG_FRC */
+#define WM831X_CHG_FRC_MASK                     0x4000  /* CHG_FRC */
+#define WM831X_CHG_FRC_SHIFT                        14  /* CHG_FRC */
+#define WM831X_CHG_FRC_WIDTH                         1  /* CHG_FRC */
+#define WM831X_CHG_ITERM_MASK                   0x1C00  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_SHIFT                      10  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_WIDTH                       3  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_FAST                         0x0020  /* CHG_FAST */
+#define WM831X_CHG_FAST_MASK                    0x0020  /* CHG_FAST */
+#define WM831X_CHG_FAST_SHIFT                        5  /* CHG_FAST */
+#define WM831X_CHG_FAST_WIDTH                        1  /* CHG_FAST */
+#define WM831X_CHG_IMON_ENA                     0x0002  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_MASK                0x0002  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_SHIFT                    1  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_WIDTH                    1  /* CHG_IMON_ENA */
+#define WM831X_CHG_CHIP_TEMP_MON                0x0001  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_MASK           0x0001  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_SHIFT               0  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_WIDTH               1  /* CHG_CHIP_TEMP_MON */
+
+/*
+ * R16457 (0x4049) - Charger Control 2
+ */
+#define WM831X_CHG_OFF_MSK                      0x4000  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_MASK                 0x4000  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_SHIFT                    14  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_WIDTH                     1  /* CHG_OFF_MSK */
+#define WM831X_CHG_TIME_MASK                    0x0F00  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_SHIFT                        8  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_WIDTH                        4  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TRKL_ILIM_MASK               0x00C0  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_SHIFT                   6  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_WIDTH                   2  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_VSEL_MASK                    0x0030  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_SHIFT                        4  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_WIDTH                        2  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_FAST_ILIM_MASK               0x000F  /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_SHIFT                   0  /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_WIDTH                   4  /* CHG_FAST_ILIM - [3:0] */
+
+/*
+ * R16458 (0x404A) - Charger Status
+ */
+#define WM831X_BATT_OV_STS                      0x8000  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_MASK                 0x8000  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_SHIFT                    15  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_WIDTH                     1  /* BATT_OV_STS */
+#define WM831X_CHG_STATE_MASK                   0x7000  /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_SHIFT                      12  /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_WIDTH                       3  /* CHG_STATE - [14:12] */
+#define WM831X_BATT_HOT_STS                     0x0800  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_MASK                0x0800  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_SHIFT                   11  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_WIDTH                    1  /* BATT_HOT_STS */
+#define WM831X_BATT_COLD_STS                    0x0400  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_MASK               0x0400  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_SHIFT                  10  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_WIDTH                   1  /* BATT_COLD_STS */
+#define WM831X_CHG_TOPOFF                       0x0200  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_MASK                  0x0200  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_SHIFT                      9  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_WIDTH                      1  /* CHG_TOPOFF */
+#define WM831X_CHG_ACTIVE                       0x0100  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_MASK                  0x0100  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_SHIFT                      8  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_WIDTH                      1  /* CHG_ACTIVE */
+#define WM831X_CHG_TIME_ELAPSED_MASK            0x00FF  /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_SHIFT                0  /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_WIDTH                8  /* CHG_TIME_ELAPSED - [7:0] */
+
+#define WM831X_CHG_STATE_OFF         (0 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE     (1 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST        (2 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE_OT  (3 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST_OT     (4 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_DEFECTIVE   (5 << WM831X_CHG_STATE_SHIFT)
+
+/*
+ * R16459 (0x404B) - Backup Charger Control
+ */
+#define WM831X_BKUP_CHG_ENA                     0x8000  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_MASK                0x8000  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_SHIFT                   15  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_WIDTH                    1  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_STS                     0x4000  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_MASK                0x4000  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_SHIFT                   14  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_WIDTH                    1  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_MODE                    0x1000  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_MASK               0x1000  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_SHIFT                  12  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_WIDTH                   1  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_BATT_DET_ENA                0x0800  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_MASK           0x0800  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_SHIFT              11  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_WIDTH               1  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_STS                    0x0400  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_MASK               0x0400  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_SHIFT                  10  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_WIDTH                   1  /* BKUP_BATT_STS */
+#define WM831X_BKUP_CHG_VLIM                    0x0010  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_MASK               0x0010  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_SHIFT                   4  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_WIDTH                   1  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_ILIM_MASK               0x0003  /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_SHIFT                   0  /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_WIDTH                   2  /* BKUP_CHG_ILIM - [1:0] */
+
+#endif

include/linux/power_supply.h

@@ -38,6 +38,13 @@ enum {
 	POWER_SUPPLY_STATUS_FULL,
 };
 
+enum {
+	POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
+	POWER_SUPPLY_CHARGE_TYPE_NONE,
+	POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+	POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
 enum {
 	POWER_SUPPLY_HEALTH_UNKNOWN = 0,
 	POWER_SUPPLY_HEALTH_GOOD,
@@ -58,9 +65,19 @@ enum {
 	POWER_SUPPLY_TECHNOLOGY_LiMn,
 };
 
+enum {
+	POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
+	POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_LOW,
+	POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
+	POWER_SUPPLY_CAPACITY_LEVEL_FULL,
+};
+
 enum power_supply_property {
 	/* Properties of type `int' */
 	POWER_SUPPLY_PROP_STATUS = 0,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
@@ -89,6 +106,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_ENERGY_AVG,
 	POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
@@ -126,6 +144,7 @@ struct power_supply {
 			    enum power_supply_property psp,
 			    union power_supply_propval *val);
 	void (*external_power_changed)(struct power_supply *psy);
+	void (*set_charged)(struct power_supply *psy);
 
 	/* For APM emulation, think legacy userspace. */
 	int use_for_apm;
@@ -165,8 +184,10 @@ struct power_supply_info {
 	int use_for_apm;
 };
 
+extern struct power_supply *power_supply_get_by_name(char *name);
 extern void power_supply_changed(struct power_supply *psy);
 extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_battery_charged(struct power_supply *psy);
 
 #if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE)
 extern int power_supply_is_system_supplied(void);

include/linux/wm97xx.h

@@ -293,6 +293,24 @@ struct wm97xx {
 	u16 suspend_mode;               /* PRP in suspend mode */
 };
 
+struct wm97xx_batt_pdata {
+	int	batt_aux;
+	int	temp_aux;
+	int	charge_gpio;
+	int	min_voltage;
+	int	max_voltage;
+	int	batt_div;
+	int	batt_mult;
+	int	temp_div;
+	int	temp_mult;
+	int	batt_tech;
+	char	*batt_name;
+};
+
+struct wm97xx_pdata {
+	struct wm97xx_batt_pdata	*batt_pdata;	/* battery data */
+};
+
 /*
  * Codec GPIO access (not supported on WM9705)
  * This can be used to set/get codec GPIO and Virtual GPIO status.

include/linux/wm97xx_batt.h

@@ -3,22 +3,12 @@
 
 #include <linux/wm97xx.h>
 
-struct wm97xx_batt_info {
-	int	batt_aux;
-	int	temp_aux;
-	int	charge_gpio;
-	int	min_voltage;
-	int	max_voltage;
-	int	batt_div;
-	int	batt_mult;
-	int	temp_div;
-	int	temp_mult;
-	int	batt_tech;
-	char	*batt_name;
-};
+#warning This file will be removed soon, use wm97xx.h instead!
+
+#define wm97xx_batt_info wm97xx_batt_pdata
 
 #ifdef CONFIG_BATTERY_WM97XX
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
 #else
 static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
 #endif