ARM: LPC32XX: Initial arch header files

Header files for the LPC32xx arch
Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/mach-lpc32xx/include/mach/clkdev.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif

arch/arm/mach-lpc32xx/include/mach/gpio.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+#endif

arch/arm/mach-lpc32xx/include/mach/hardware.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+#endif

arch/arm/mach-lpc32xx/include/mach/i2c.h

+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H */

arch/arm/mach-lpc32xx/include/mach/io.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif

arch/arm/mach-lpc32xx/include/mach/irqs.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
+#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_LPC32XX_SUB1IRQ		0
+#define IRQ_LPC32XX_SUB2IRQ		1
+#define IRQ_LPC32XX_PWM3		3
+#define IRQ_LPC32XX_PWM4		4
+#define IRQ_LPC32XX_HSTIMER		5
+#define IRQ_LPC32XX_WATCH		6
+#define IRQ_LPC32XX_UART_IIR3		7
+#define IRQ_LPC32XX_UART_IIR4		8
+#define IRQ_LPC32XX_UART_IIR5		9
+#define IRQ_LPC32XX_UART_IIR6		10
+#define IRQ_LPC32XX_FLASH		11
+#define IRQ_LPC32XX_SD1			13
+#define IRQ_LPC32XX_LCD			14
+#define IRQ_LPC32XX_SD0			15
+#define IRQ_LPC32XX_TIMER0		16
+#define IRQ_LPC32XX_TIMER1		17
+#define IRQ_LPC32XX_TIMER2		18
+#define IRQ_LPC32XX_TIMER3		19
+#define IRQ_LPC32XX_SSP0		20
+#define IRQ_LPC32XX_SSP1		21
+#define IRQ_LPC32XX_I2S0		22
+#define IRQ_LPC32XX_I2S1		23
+#define IRQ_LPC32XX_UART_IIR7		24
+#define IRQ_LPC32XX_UART_IIR2		25
+#define IRQ_LPC32XX_UART_IIR1		26
+#define IRQ_LPC32XX_MSTIMER		27
+#define IRQ_LPC32XX_DMA			28
+#define IRQ_LPC32XX_ETHERNET		29
+#define IRQ_LPC32XX_SUB1FIQ		30
+#define IRQ_LPC32XX_SUB2FIQ		31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
+#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
+#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
+#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
+#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
+#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
+#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
+#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
+#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
+#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
+#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
+#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
+#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
+#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
+#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
+#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
+#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
+#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
+#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
+#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
+#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
+#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
+#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
+#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
+#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
+#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
+#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
+#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
+#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
+#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
+#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
+#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
+#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
+#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
+#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
+#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
+#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
+#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
+#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
+#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
+#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
+#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
+#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
+#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
+#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
+#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
+
+#define NR_IRQS				96
+
+#endif

arch/arm/mach-lpc32xx/include/mach/memory.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET	UL(0x80000000)
+
+#endif

arch/arm/mach-lpc32xx/include/mach/system.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	extern void lpc32xx_watchdog_reset(void);
+
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: Rebooting system\n");
+
+		/* Disable interrupts */
+		local_irq_disable();
+
+		lpc32xx_watchdog_reset();
+		break;
+
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Wait for watchdog to reset system */
+	while (1)
+		;
+}
+
+#endif

arch/arm/mach-lpc32xx/include/mach/timex.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE	13000000
+
+#endif

arch/arm/mach-lpc32xx/include/mach/uncompress.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+/*
+ * Uncompress output is hardcoded to standard UART 5
+ */
+
+#define UART_FIFO_CTL_TX_RESET	(1 << 2)
+#define UART_STATUS_TX_MT	(1 << 6)
+
+#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
+
+#define LPC32XX_UART_DLLFIFO_O	0x00
+#define LPC32XX_UART_IIRFCR_O	0x08
+#define LPC32XX_UART_LSR_O	0x14
+
+static inline void putc(int ch)
+{
+	/* Wait for transmit FIFO to empty */
+	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
+		UART_STATUS_TX_MT) == 0)
+		;
+
+	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
+}
+
+static inline void flush(void)
+{
+	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
+		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
+}
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif

arch/arm/mach-lpc32xx/include/mach/vmalloc.h

+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	0xF0000000
+
+#endif