Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

MAINTAINERS

@@ -8771,22 +8771,6 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-icy.c
 
-IDE SUBSYSTEM
-M:	"David S. Miller" <davem@davemloft.net>
-L:	linux-ide@vger.kernel.org
-S:	Maintained
-Q:	http://patchwork.ozlabs.org/project/linux-ide/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide.git
-F:	Documentation/ide/
-F:	drivers/ide/
-F:	include/linux/ide.h
-
-IDE/ATAPI DRIVERS
-L:	linux-ide@vger.kernel.org
-S:	Orphan
-F:	Documentation/cdrom/ide-cd.rst
-F:	drivers/ide/ide-cd*
-
 IDEAPAD LAPTOP EXTRAS DRIVER
 M:	Ike Panhc <ike.pan@canonical.com>
 L:	platform-driver-x86@vger.kernel.org

arch/alpha/configs/defconfig

@@ -25,19 +25,18 @@ CONFIG_PNP=y
 CONFIG_ISAPNP=y
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_ALI15X3=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CY82C693=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_ALI=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_NET_ETHERNET=y

arch/arm/configs/footbridge_defconfig

@@ -64,7 +64,6 @@ CONFIG_PARIDE_ON26=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y

arch/arm/configs/pxa_defconfig

@@ -215,8 +215,6 @@ CONFIG_IIO=m
 CONFIG_AD5446=m
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_SPI=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m

arch/m68k/atari/config.c

@@ -875,16 +875,8 @@ static const struct resource atari_scsi_tt_rsrc[] __initconst = {
 #define FALCON_IDE_BASE	0xfff00000
 
 static const struct resource atari_falconide_rsrc[] __initconst = {
-	{
-		.flags = IORESOURCE_MEM,
-		.start = FALCON_IDE_BASE,
-		.end   = FALCON_IDE_BASE + 0x39,
-	},
-	{
-		.flags = IORESOURCE_IRQ,
-		.start = IRQ_MFP_FSCSI,
-		.end   = IRQ_MFP_FSCSI,
-	},
+	DEFINE_RES_MEM(FALCON_IDE_BASE, 0x38),
+	DEFINE_RES_MEM(FALCON_IDE_BASE + 0x38, 2),
 };
 
 int __init atari_platform_init(void)

arch/m68k/configs/amiga_defconfig

@@ -323,11 +323,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
-CONFIG_IDE=y
-CONFIG_IDE_GD_ATAPI=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_BUDDHA=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -344,6 +339,11 @@ CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
 CONFIG_SCSI_ZORRO_ESP=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_BMDMA is not set
+CONFIG_PATA_GAYLE=y
+CONFIG_PATA_BUDDHA=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m

arch/m68k/configs/atari_defconfig

@@ -324,10 +324,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
-CONFIG_IDE=y
-CONFIG_IDE_GD_ATAPI=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -339,6 +335,10 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_ATARI_SCSI=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_BMDMA is not set
+CONFIG_PATA_FALCON=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m

arch/m68k/configs/mac_defconfig

@@ -315,11 +315,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
-CONFIG_IDE=y
-CONFIG_IDE_GD_ATAPI=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -332,6 +327,10 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_BMDMA is not set
+CONFIG_PATA_PLATFORM=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m

arch/m68k/configs/multi_defconfig

@@ -344,15 +344,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
-CONFIG_IDE=y
-CONFIG_IDE_GD_ATAPI=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_BUDDHA=y
-CONFIG_BLK_DEV_FALCON_IDE=y
-CONFIG_BLK_DEV_MAC_IDE=y
-CONFIG_BLK_DEV_Q40IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -376,6 +367,13 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_BMDMA is not set
+CONFIG_PATA_FALCON=y
+CONFIG_PATA_GAYLE=y
+CONFIG_PATA_BUDDHA=y
+CONFIG_PATA_PLATFORM=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m

arch/m68k/configs/q40_defconfig

@@ -314,10 +314,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
-CONFIG_IDE=y
-CONFIG_IDE_GD_ATAPI=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_Q40IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -328,6 +324,10 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_BMDMA is not set
+CONFIG_PATA_FALCON=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m

arch/m68k/mac/config.c

@@ -933,13 +933,15 @@ static const struct resource mac_scsi_ccl_rsrc[] __initconst = {
 	},
 };
 
-static const struct resource mac_ide_quadra_rsrc[] __initconst = {
-	DEFINE_RES_MEM(0x50F1A000, 0x104),
+static const struct resource mac_pata_quadra_rsrc[] __initconst = {
+	DEFINE_RES_MEM(0x50F1A000, 0x38),
+	DEFINE_RES_MEM(0x50F1A038, 0x04),
 	DEFINE_RES_IRQ(IRQ_NUBUS_F),
 };
 
-static const struct resource mac_ide_pb_rsrc[] __initconst = {
-	DEFINE_RES_MEM(0x50F1A000, 0x104),
+static const struct resource mac_pata_pb_rsrc[] __initconst = {
+	DEFINE_RES_MEM(0x50F1A000, 0x38),
+	DEFINE_RES_MEM(0x50F1A038, 0x04),
 	DEFINE_RES_IRQ(IRQ_NUBUS_C),
 };
 
@@ -949,7 +951,7 @@ static const struct resource mac_pata_baboon_rsrc[] __initconst = {
 	DEFINE_RES_IRQ(IRQ_BABOON_1),
 };
 
-static const struct pata_platform_info mac_pata_baboon_data __initconst = {
+static const struct pata_platform_info mac_pata_data __initconst = {
 	.ioport_shift = 2,
 };
 
@@ -1067,17 +1069,19 @@ int __init mac_platform_init(void)
 
 	switch (macintosh_config->ide_type) {
 	case MAC_IDE_QUADRA:
-		platform_device_register_simple("mac_ide", -1,
-			mac_ide_quadra_rsrc, ARRAY_SIZE(mac_ide_quadra_rsrc));
+		platform_device_register_resndata(NULL, "pata_platform", -1,
+			mac_pata_quadra_rsrc, ARRAY_SIZE(mac_pata_quadra_rsrc),
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	case MAC_IDE_PB:
-		platform_device_register_simple("mac_ide", -1,
-			mac_ide_pb_rsrc, ARRAY_SIZE(mac_ide_pb_rsrc));
+		platform_device_register_resndata(NULL, "pata_platform", -1,
+			mac_pata_pb_rsrc, ARRAY_SIZE(mac_pata_pb_rsrc),
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	case MAC_IDE_BABOON:
 		platform_device_register_resndata(NULL, "pata_platform", -1,
 			mac_pata_baboon_rsrc, ARRAY_SIZE(mac_pata_baboon_rsrc),
-			&mac_pata_baboon_data, sizeof(mac_pata_baboon_data));
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	}
 

arch/m68k/q40/config.c

@@ -286,14 +286,39 @@ static int q40_set_rtc_pll(struct rtc_pll_info *pll)
 		return -EINVAL;
 }
 
-static __init int q40_add_kbd_device(void)
-{
-	struct platform_device *pdev;
+#define PCIDE_BASE1	0x1f0
+#define PCIDE_BASE2	0x170
+#define PCIDE_CTL	0x206
+
+static const struct resource q40_pata_rsrc_0[] __initconst = {
+	DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE1 * 4, 0x38),
+	DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE1 + PCIDE_CTL) * 4, 2),
+	DEFINE_RES_IO(PCIDE_BASE1, 8),
+	DEFINE_RES_IO(PCIDE_BASE1 + PCIDE_CTL, 1),
+	DEFINE_RES_IRQ(14),
+};
 
+static const struct resource q40_pata_rsrc_1[] __initconst = {
+	DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE2 * 4, 0x38),
+	DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE2 + PCIDE_CTL) * 4, 2),
+	DEFINE_RES_IO(PCIDE_BASE2, 8),
+	DEFINE_RES_IO(PCIDE_BASE2 + PCIDE_CTL, 1),
+	DEFINE_RES_IRQ(15),
+};
+
+static __init int q40_platform_init(void)
+{
 	if (!MACH_IS_Q40)
 		return -ENODEV;
 
-	pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
-	return PTR_ERR_OR_ZERO(pdev);
+	platform_device_register_simple("q40kbd", -1, NULL, 0);
+
+	platform_device_register_simple("atari-falcon-ide", 0, q40_pata_rsrc_0,
+					ARRAY_SIZE(q40_pata_rsrc_0));
+
+	platform_device_register_simple("atari-falcon-ide", 1, q40_pata_rsrc_1,
+					ARRAY_SIZE(q40_pata_rsrc_1));
+
+	return 0;
 }
-arch_initcall(q40_add_kbd_device);
+arch_initcall(q40_platform_init);

drivers/Kconfig

@@ -33,8 +33,6 @@ source "drivers/nvme/Kconfig"
 
 source "drivers/misc/Kconfig"
 
-source "drivers/ide/Kconfig"
-
 source "drivers/scsi/Kconfig"
 
 source "drivers/ata/Kconfig"

drivers/Makefile

@@ -78,7 +78,6 @@ obj-$(CONFIG_CXL_BUS)		+= cxl/
 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
 obj-$(CONFIG_NUBUS)		+= nubus/
 obj-y				+= macintosh/
-obj-$(CONFIG_IDE)		+= ide/
 obj-y				+= scsi/
 obj-y				+= nvme/
 obj-$(CONFIG_ATA)		+= ata/

drivers/ata/Kconfig

@@ -1015,11 +1015,11 @@ config PATA_CMD640_PCI
 	  If unsure, say N.
 
 config PATA_FALCON
-	tristate "Atari Falcon PATA support"
-	depends on M68K && ATARI
+	tristate "Atari Falcon and Q40/Q60 PATA support"
+	depends on M68K && (ATARI || Q40)
 	help
 	  This option enables support for the on-board IDE
-	  interface on the Atari Falcon.
+	  interface on the Atari Falcon and Q40/Q60.
 
 	  If unsure, say N.
 

drivers/ata/ahci.c

@@ -446,6 +446,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
 
+	/* Dell S140/S150 */
+	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_SUBVENDOR_ID_DELL, PCI_ANY_ID,
+	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
 	/* VIA */
 	{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
 	{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */

drivers/ata/ahci.h

@@ -384,12 +384,15 @@ extern struct device_attribute *ahci_sdev_attrs[];
  * for ATA_BASE_SHT
  */
 #define AHCI_SHT(drv_name)						\
-	ATA_NCQ_SHT(drv_name),						\
+	__ATA_BASE_SHT(drv_name),					\
 	.can_queue		= AHCI_MAX_CMDS,			\
 	.sg_tablesize		= AHCI_MAX_SG,				\
 	.dma_boundary		= AHCI_DMA_BOUNDARY,			\
 	.shost_attrs		= ahci_shost_attrs,			\
-	.sdev_attrs		= ahci_sdev_attrs
+	.sdev_attrs		= ahci_sdev_attrs,			\
+	.change_queue_depth     = ata_scsi_change_queue_depth,		\
+	.tag_alloc_policy       = BLK_TAG_ALLOC_RR,             	\
+	.slave_configure        = ata_scsi_slave_config
 
 extern struct ata_port_operations ahci_ops;
 extern struct ata_port_operations ahci_platform_ops;

drivers/ata/ahci_sunxi.c

@@ -200,7 +200,7 @@ static void ahci_sunxi_start_engine(struct ata_port *ap)
 }
 
 static const struct ata_port_info ahci_sunxi_port_info = {
-	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &ahci_platform_ops,

drivers/ata/pata_atiixp.c

@@ -252,8 +252,9 @@ static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template atiixp_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
 };
 
 static struct ata_port_operations atiixp_port_ops = {

drivers/ata/pata_cs5520.c

@@ -95,8 +95,9 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5520_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
 };
 
 static struct ata_port_operations cs5520_port_ops = {

drivers/ata/pata_cs5530.c

@@ -147,8 +147,9 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template cs5530_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary	= ATA_DMA_BOUNDARY,
 };
 
 static struct ata_port_operations cs5530_port_ops = {

drivers/ata/pata_cypress.c

@@ -41,6 +41,10 @@ enum {
 	CY82_INDEX_TIMEOUT	= 0x32
 };
 
+static bool enable_dma = true;
+module_param(enable_dma, bool, 0);
+MODULE_PARM_DESC(enable_dma, "Enable bus master DMA operations");
+
 /**
  *	cy82c693_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -124,14 +128,16 @@ static struct ata_port_operations cy82c693_port_ops = {
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	static const struct ata_port_info info = {
+	static struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = ATA_PIO4,
-		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &cy82c693_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
+	if (enable_dma)
+		info.mwdma_mask = ATA_MWDMA2;
+
 	/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2.
 	   For the moment we don't handle the secondary. FIXME */
 

drivers/ata/pata_ep93xx.c

@@ -928,7 +928,7 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
 	/* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-		err = -ENXIO;
+		err = irq;
 		goto err_rel_gpio;
 	}
 

drivers/ata/pata_falcon.c

@@ -33,8 +33,6 @@
 #define DRV_NAME "pata_falcon"
 #define DRV_VERSION "0.1.0"
 
-#define ATA_HD_CONTROL	0x39
-
 static struct scsi_host_template pata_falcon_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
@@ -121,23 +119,42 @@ static struct ata_port_operations pata_falcon_ops = {
 
 static int __init pata_falcon_init_one(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *base_mem_res, *ctl_mem_res;
+	struct resource *base_res, *ctl_res, *irq_res;
 	struct ata_host *host;
 	struct ata_port *ap;
 	void __iomem *base;
+	int irq = 0;
 
-	dev_info(&pdev->dev, "Atari Falcon PATA controller\n");
+	dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
+	base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (base_res && !devm_request_region(&pdev->dev, base_res->start,
+					   resource_size(base_res), DRV_NAME)) {
+		dev_err(&pdev->dev, "resources busy\n");
+		return -EBUSY;
+	}
 
-	if (!devm_request_mem_region(&pdev->dev, res->start,
-				     resource_size(res), DRV_NAME)) {
+	ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+	if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
+					    resource_size(ctl_res), DRV_NAME)) {
 		dev_err(&pdev->dev, "resources busy\n");
 		return -EBUSY;
 	}
 
+	base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!base_mem_res)
+		return -ENODEV;
+	if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
+				     resource_size(base_mem_res), DRV_NAME)) {
+		dev_err(&pdev->dev, "resources busy\n");
+		return -EBUSY;
+	}
+
+	ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!ctl_mem_res)
+		return -ENODEV;
+
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host)
@@ -147,10 +164,10 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
 	ap->ops = &pata_falcon_ops;
 	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
-	ap->flags |= ATA_FLAG_PIO_POLLING;
 
-	base = (void __iomem *)res->start;
-	ap->ioaddr.data_addr		= base;
+	base = (void __iomem *)base_mem_res->start;
+	/* N.B. this assumes data_addr will be used for word-sized I/O only */
+	ap->ioaddr.data_addr		= base + 0 + 0 * 4;
 	ap->ioaddr.error_addr		= base + 1 + 1 * 4;
 	ap->ioaddr.feature_addr		= base + 1 + 1 * 4;
 	ap->ioaddr.nsect_addr		= base + 1 + 2 * 4;
@@ -161,14 +178,25 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
 	ap->ioaddr.status_addr		= base + 1 + 7 * 4;
 	ap->ioaddr.command_addr		= base + 1 + 7 * 4;
 
-	ap->ioaddr.altstatus_addr	= base + ATA_HD_CONTROL;
-	ap->ioaddr.ctl_addr		= base + ATA_HD_CONTROL;
+	base = (void __iomem *)ctl_mem_res->start;
+	ap->ioaddr.altstatus_addr	= base + 1;
+	ap->ioaddr.ctl_addr		= base + 1;
 
-	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
-		      (unsigned long)base + ATA_HD_CONTROL);
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+		      (unsigned long)base_mem_res->start,
+		      (unsigned long)ctl_mem_res->start);
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_res && irq_res->start > 0) {
+		irq = irq_res->start;
+	} else {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
 
 	/* activate */
-	return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
+	return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
+				 IRQF_SHARED, &pata_falcon_sht);
 }
 
 static int __exit pata_falcon_remove_one(struct platform_device *pdev)

drivers/ata/pata_macio.c

@@ -914,7 +914,7 @@ static int pata_macio_do_resume(struct pata_macio_priv *priv)
 #endif /* CONFIG_PM_SLEEP */
 
 static struct scsi_host_template pata_macio_sht = {
-	ATA_BASE_SHT(DRV_NAME),
+	__ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= MAX_DCMDS,
 	/* We may not need that strict one */
 	.dma_boundary		= ATA_DMA_BOUNDARY,
@@ -923,6 +923,9 @@ static struct scsi_host_template pata_macio_sht = {
 	 */
 	.max_segment_size	= MAX_DBDMA_SEG,
 	.slave_configure	= pata_macio_slave_config,
+	.sdev_attrs		= ata_common_sdev_attrs,
+	.can_queue		= ATA_DEF_QUEUE,
+	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
 };
 
 static struct ata_port_operations pata_macio_ops = {

drivers/ata/pata_octeon_cf.c

@@ -898,10 +898,11 @@ static int octeon_cf_probe(struct platform_device *pdev)
 					return -EINVAL;
 				}
 
-				irq_handler = octeon_cf_interrupt;
 				i = platform_get_irq(dma_dev, 0);
-				if (i > 0)
+				if (i > 0) {
 					irq = i;
+					irq_handler = octeon_cf_interrupt;
+				}
 			}
 			of_node_put(dma_node);
 		}

drivers/ata/pata_rb532_cf.c

@@ -115,10 +115,10 @@ static int rb532_pata_driver_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
-		return -ENOENT;
-	}
+	if (irq < 0)
+		return irq;
+	if (!irq)
+		return -EINVAL;
 
 	gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
 	if (IS_ERR(gpiod)) {

drivers/ata/pata_sc1200.c

@@ -193,8 +193,9 @@ static int sc1200_qc_defer(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template sc1200_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary	= ATA_DMA_BOUNDARY,
 };
 
 static struct ata_port_operations sc1200_port_ops = {

drivers/ata/pata_serverworks.c

@@ -253,8 +253,9 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev
 }
 
 static struct scsi_host_template serverworks_osb4_sht = {
-	ATA_BMDMA_SHT(DRV_NAME),
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
+	.dma_boundary	= ATA_DMA_BOUNDARY,
 };
 
 static struct scsi_host_template serverworks_csb_sht = {

drivers/ata/sata_fsl.c

@@ -313,7 +313,7 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host,
 
 	DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n",
 			intr_coalescing_count, intr_coalescing_ticks);
-	DPRINTK("ICC register status: (hcr base: 0x%x) = 0x%x\n",
+	DPRINTK("ICC register status: (hcr base: %p) = 0x%x\n",
 			hcr_base, ioread32(hcr_base + ICC));
 }
 

drivers/ata/sata_highbank.c

@@ -469,10 +469,12 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
+	if (irq < 0) {
 		dev_err(dev, "no irq\n");
-		return -EINVAL;
+		return irq;
 	}
+	if (!irq)
+		return -EINVAL;
 
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv) {

drivers/ata/sata_mv.c

@@ -666,10 +666,14 @@ static struct scsi_host_template mv5_sht = {
 };
 #endif
 static struct scsi_host_template mv6_sht = {
-	ATA_NCQ_SHT(DRV_NAME),
+	__ATA_BASE_SHT(DRV_NAME),
 	.can_queue		= MV_MAX_Q_DEPTH - 1,
 	.sg_tablesize		= MV_MAX_SG_CT / 2,
 	.dma_boundary		= MV_DMA_BOUNDARY,
+	.sdev_attrs             = ata_ncq_sdev_attrs,
+	.change_queue_depth	= ata_scsi_change_queue_depth,
+	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
+	.slave_configure	= ata_scsi_slave_config
 };
 
 static struct ata_port_operations mv5_ops = {

drivers/ata/sata_nv.c

@@ -375,19 +375,25 @@ static struct scsi_host_template nv_sht = {
 };
 
 static struct scsi_host_template nv_adma_sht = {
-	ATA_NCQ_SHT(DRV_NAME),
+	__ATA_BASE_SHT(DRV_NAME),
 	.can_queue		= NV_ADMA_MAX_CPBS,
 	.sg_tablesize		= NV_ADMA_SGTBL_TOTAL_LEN,
 	.dma_boundary		= NV_ADMA_DMA_BOUNDARY,
 	.slave_configure	= nv_adma_slave_config,
+	.sdev_attrs             = ata_ncq_sdev_attrs,
+	.change_queue_depth     = ata_scsi_change_queue_depth,
+	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
 };
 
 static struct scsi_host_template nv_swncq_sht = {
-	ATA_NCQ_SHT(DRV_NAME),
+	__ATA_BASE_SHT(DRV_NAME),
 	.can_queue		= ATA_MAX_QUEUE - 1,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= nv_swncq_slave_config,
+	.sdev_attrs             = ata_ncq_sdev_attrs,
+	.change_queue_depth     = ata_scsi_change_queue_depth,
+	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
 };
 
 /*
@@ -2118,7 +2124,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		 */
 		lack_dhfis = 1;
 
-	DPRINTK("id 0x%x QC: qc_active 0x%x,"
+	DPRINTK("id 0x%x QC: qc_active 0x%llx,"
 		"SWNCQ:qc_active 0x%X defer_bits %X "
 		"dhfis 0x%X dmafis 0x%X last_issue_tag %x\n",
 		ap->print_id, ap->qc_active, pp->qc_active,

drivers/ata/sata_sil24.c

@@ -374,11 +374,14 @@ static struct pci_driver sil24_pci_driver = {
 };
 
 static struct scsi_host_template sil24_sht = {
-	ATA_NCQ_SHT(DRV_NAME),
+	__ATA_BASE_SHT(DRV_NAME),
 	.can_queue		= SIL24_MAX_CMDS,
 	.sg_tablesize		= SIL24_MAX_SGE,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_FIFO,
+	.sdev_attrs		= ata_ncq_sdev_attrs,
+	.change_queue_depth	= ata_scsi_change_queue_depth,
+	.slave_configure	= ata_scsi_slave_config
 };
 
 static struct ata_port_operations sil24_ops = {

drivers/ide/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# link order is important here
-#
-
-ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
-	      ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \
-	      ide-io-std.o ide-eh.o
-
-# core IDE code
-ide-core-$(CONFIG_IDE_XFER_MODE)	+= ide-pio-blacklist.o ide-xfer-mode.o
-ide-core-$(CONFIG_IDE_TIMINGS)		+= ide-timings.o
-ide-core-$(CONFIG_IDE_ATAPI)		+= ide-atapi.o
-ide-core-$(CONFIG_BLK_DEV_IDEPCI)	+= setup-pci.o
-ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
-ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF)	+= ide-dma-sff.o
-ide-core-$(CONFIG_IDE_PROC_FS)		+= ide-proc.o
-ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o
-ide-core-$(CONFIG_IDE_LEGACY)		+= ide-legacy.o
-
-obj-$(CONFIG_IDE)			+= ide-core.o
-
-obj-$(CONFIG_BLK_DEV_ALI14XX)		+= ali14xx.o
-obj-$(CONFIG_BLK_DEV_UMC8672)		+= umc8672.o
-obj-$(CONFIG_BLK_DEV_DTC2278)		+= dtc2278.o
-obj-$(CONFIG_BLK_DEV_HT6560B)		+= ht6560b.o
-obj-$(CONFIG_BLK_DEV_QD65XX)		+= qd65xx.o
-obj-$(CONFIG_BLK_DEV_4DRIVES)		+= ide-4drives.o
-
-obj-$(CONFIG_BLK_DEV_GAYLE)		+= gayle.o
-obj-$(CONFIG_BLK_DEV_FALCON_IDE)	+= falconide.o
-obj-$(CONFIG_BLK_DEV_MAC_IDE)		+= macide.o
-obj-$(CONFIG_BLK_DEV_Q40IDE)		+= q40ide.o
-obj-$(CONFIG_BLK_DEV_BUDDHA)		+= buddha.o
-
-obj-$(CONFIG_BLK_DEV_AEC62XX)		+= aec62xx.o
-obj-$(CONFIG_BLK_DEV_ALI15X3)		+= alim15x3.o
-obj-$(CONFIG_BLK_DEV_AMD74XX)		+= amd74xx.o
-obj-$(CONFIG_BLK_DEV_ATIIXP)		+= atiixp.o
-obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
-obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
-obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
-obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
-obj-$(CONFIG_BLK_DEV_CS5536)		+= cs5536.o
-obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
-obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
-obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
-obj-$(CONFIG_BLK_DEV_HPT366)		+= hpt366.o
-obj-$(CONFIG_BLK_DEV_IT8172)		+= it8172.o
-obj-$(CONFIG_BLK_DEV_IT8213)		+= it8213.o
-obj-$(CONFIG_BLK_DEV_IT821X)		+= it821x.o
-obj-$(CONFIG_BLK_DEV_JMICRON)		+= jmicron.o
-obj-$(CONFIG_BLK_DEV_NS87415)		+= ns87415.o
-obj-$(CONFIG_BLK_DEV_OPTI621)		+= opti621.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_OLD)	+= pdc202xx_old.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_NEW)	+= pdc202xx_new.o
-obj-$(CONFIG_BLK_DEV_PIIX)		+= piix.o
-obj-$(CONFIG_BLK_DEV_RZ1000)		+= rz1000.o
-obj-$(CONFIG_BLK_DEV_SVWKS)		+= serverworks.o
-obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
-obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
-obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
-obj-$(CONFIG_BLK_DEV_SLC90E66)		+= slc90e66.o
-obj-$(CONFIG_BLK_DEV_TC86C001)		+= tc86c001.o
-obj-$(CONFIG_BLK_DEV_TRIFLEX)		+= triflex.o
-obj-$(CONFIG_BLK_DEV_TRM290)		+= trm290.o
-obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o
-
-# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC)		+= ide-pci-generic.o
-
-obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
-
-obj-$(CONFIG_BLK_DEV_CMD640)		+= cmd640.o
-
-obj-$(CONFIG_BLK_DEV_IDE_PMAC)		+= pmac.o
-
-obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
-obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
-
-ide-gd_mod-y += ide-gd.o
-ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
-
-ifeq ($(CONFIG_IDE_GD_ATA), y)
-	ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
-ifeq ($(CONFIG_IDE_PROC_FS), y)
-	ide-gd_mod-y += ide-disk_proc.o
-endif
-endif
-
-ifeq ($(CONFIG_IDE_GD_ATAPI), y)
-	ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
-ifeq ($(CONFIG_IDE_PROC_FS), y)
-	ide-gd_mod-y += ide-floppy_proc.o
-endif
-endif
-
-obj-$(CONFIG_IDE_GD)			+= ide-gd_mod.o
-obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o
-obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
-
-obj-$(CONFIG_BLK_DEV_IDECS)		+= ide-cs.o
-
-obj-$(CONFIG_BLK_DEV_PLATFORM)		+= ide_platform.o
-
-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
-obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
-obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
-
-obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
-obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o

drivers/ide/aec62xx.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "aec62xx"
-
-struct chipset_bus_clock_list_entry {
-	u8 xfer_speed;
-	u8 chipset_settings;
-	u8 ultra_settings;
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
-	{	XFER_UDMA_6,	0x31,	0x07	},
-	{	XFER_UDMA_5,	0x31,	0x06	},
-	{	XFER_UDMA_4,	0x31,	0x05	},
-	{	XFER_UDMA_3,	0x31,	0x04	},
-	{	XFER_UDMA_2,	0x31,	0x03	},
-	{	XFER_UDMA_1,	0x31,	0x02	},
-	{	XFER_UDMA_0,	0x31,	0x01	},
-
-	{	XFER_MW_DMA_2,	0x31,	0x00	},
-	{	XFER_MW_DMA_1,	0x31,	0x00	},
-	{	XFER_MW_DMA_0,	0x0a,	0x00	},
-	{	XFER_PIO_4,	0x31,	0x00	},
-	{	XFER_PIO_3,	0x33,	0x00	},
-	{	XFER_PIO_2,	0x08,	0x00	},
-	{	XFER_PIO_1,	0x0a,	0x00	},
-	{	XFER_PIO_0,	0x00,	0x00	},
-	{	0,		0x00,	0x00	}
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
-	{	XFER_UDMA_6,	0x41,	0x06	},
-	{	XFER_UDMA_5,	0x41,	0x05	},
-	{	XFER_UDMA_4,	0x41,	0x04	},
-	{	XFER_UDMA_3,	0x41,	0x03	},
-	{	XFER_UDMA_2,	0x41,	0x02	},
-	{	XFER_UDMA_1,	0x41,	0x01	},
-	{	XFER_UDMA_0,	0x41,	0x01	},
-
-	{	XFER_MW_DMA_2,	0x41,	0x00	},
-	{	XFER_MW_DMA_1,	0x42,	0x00	},
-	{	XFER_MW_DMA_0,	0x7a,	0x00	},
-	{	XFER_PIO_4,	0x41,	0x00	},
-	{	XFER_PIO_3,	0x43,	0x00	},
-	{	XFER_PIO_2,	0x78,	0x00	},
-	{	XFER_PIO_1,	0x7a,	0x00	},
-	{	XFER_PIO_0,	0x70,	0x00	},
-	{	0,		0x00,	0x00	}
-};
-
-/*
- * TO DO: active tuning and correction of cards without a bios.
- */
-static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
-	for ( ; chipset_table->xfer_speed ; chipset_table++)
-		if (chipset_table->xfer_speed == speed) {
-			return chipset_table->chipset_settings;
-		}
-	return chipset_table->chipset_settings;
-}
-
-static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
-	for ( ; chipset_table->xfer_speed ; chipset_table++)
-		if (chipset_table->xfer_speed == speed) {
-			return chipset_table->ultra_settings;
-		}
-	return chipset_table->ultra_settings;
-}
-
-static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
-	u16 d_conf		= 0;
-	u8 ultra = 0, ultra_conf = 0;
-	u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
-	const u8 speed = drive->dma_mode;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
-	pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
-	tmp0 = pci_bus_clock_list(speed, bus_clock);
-	d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
-	pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
-
-	tmp1 = 0x00;
-	tmp2 = 0x00;
-	pci_read_config_byte(dev, 0x54, &ultra);
-	tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
-	ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
-	tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
-	pci_write_config_byte(dev, 0x54, tmp2);
-	local_irq_restore(flags);
-}
-
-static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
-	u8 unit			= drive->dn & 1;
-	u8 tmp1 = 0, tmp2 = 0;
-	u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
-	const u8 speed = drive->dma_mode;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* high 4-bits: Active, low 4-bits: Recovery */
-	pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
-	drive_conf = pci_bus_clock_list(speed, bus_clock);
-	pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
-
-	pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
-	tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
-	ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
-	tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
-	pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
-	local_irq_restore(flags);
-}
-
-static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	drive->dma_mode = drive->pio_mode;
-	hwif->port_ops->set_dma_mode(hwif, drive);
-}
-
-static int init_chipset_aec62xx(struct pci_dev *dev)
-{
-	/* These are necessary to get AEC6280 Macintosh cards to work */
-	if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
-	    (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
-		u8 reg49h = 0, reg4ah = 0;
-		/* Clear reset and test bits.  */
-		pci_read_config_byte(dev, 0x49, &reg49h);
-		pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
-		/* Enable chip interrupt output.  */
-		pci_read_config_byte(dev, 0x4a, &reg4ah);
-		pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
-		/* Enable burst mode. */
-		pci_read_config_byte(dev, 0x4a, &reg4ah);
-		pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
-	}
-
-	return 0;
-}
-
-static u8 atp86x_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
-	pci_read_config_byte(dev, 0x49, &ata66);
-
-	return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops atp850_port_ops = {
-	.set_pio_mode		= aec_set_pio_mode,
-	.set_dma_mode		= aec6210_set_mode,
-};
-
-static const struct ide_port_ops atp86x_port_ops = {
-	.set_pio_mode		= aec_set_pio_mode,
-	.set_dma_mode		= aec6260_set_mode,
-	.cable_detect		= atp86x_cable_detect,
-};
-
-static const struct ide_port_info aec62xx_chipsets[] = {
-	{	/* 0: AEC6210 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_aec62xx,
-		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-		.port_ops	= &atp850_port_ops,
-		.host_flags	= IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_NO_DSC |
-				  IDE_HFLAG_OFF_BOARD,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA2,
-	},
-	{	/* 1: AEC6260 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_aec62xx,
-		.port_ops	= &atp86x_port_ops,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
-				  IDE_HFLAG_OFF_BOARD,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA4,
-	},
-	{	/* 2: AEC6260R */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_aec62xx,
-		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-		.port_ops	= &atp86x_port_ops,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_NON_BOOTABLE,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA4,
-	},
-	{	/* 3: AEC6280 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_aec62xx,
-		.port_ops	= &atp86x_port_ops,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_OFF_BOARD,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA5,
-	},
-	{	/* 4: AEC6280R */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_aec62xx,
-		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-		.port_ops	= &atp86x_port_ops,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_OFF_BOARD,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA5,
-	}
-};
-
-/**
- *	aec62xx_init_one	-	called when a AEC is found
- *	@dev: the aec62xx device
- *	@id: the matching pci id
- *
- *	Called when the PCI registration layer (or the IDE initialization)
- *	finds a device matching our IDE device tables.
- *
- *	NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
- *	chips, pass a local copy of 'struct ide_port_info' down the call chain.
- */
-
-static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	const struct chipset_bus_clock_list_entry *bus_clock;
-	struct ide_port_info d;
-	u8 idx = id->driver_data;
-	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-	int err;
-
-	if (bus_speed <= 33)
-		bus_clock = aec6xxx_33_base;
-	else
-		bus_clock = aec6xxx_34_base;
-
-	err = pci_enable_device(dev);
-	if (err)
-		return err;
-
-	d = aec62xx_chipsets[idx];
-
-	if (idx == 3 || idx == 4) {
-		unsigned long dma_base = pci_resource_start(dev, 4);
-
-		if (inb(dma_base + 2) & 0x10) {
-			printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
-				"\n", pci_name(dev), (idx == 4) ? "R" : "");
-			d.udma_mask = ATA_UDMA6;
-		}
-	}
-
-	err = ide_pci_init_one(dev, &d, (void *)bus_clock);
-	if (err)
-		pci_disable_device(dev);
-
-	return err;
-}
-
-static void aec62xx_remove(struct pci_dev *dev)
-{
-	ide_pci_remove(dev);
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id aec62xx_pci_tbl[] = {
-	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
-	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860),   1 },
-	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R),  2 },
-	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865),   3 },
-	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R),  4 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
-
-static struct pci_driver aec62xx_pci_driver = {
-	.name		= "AEC62xx_IDE",
-	.id_table	= aec62xx_pci_tbl,
-	.probe		= aec62xx_init_one,
-	.remove		= aec62xx_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init aec62xx_ide_init(void)
-{
-	return ide_pci_register_driver(&aec62xx_pci_driver);
-}
-
-static void __exit aec62xx_ide_exit(void)
-{
-	pci_unregister_driver(&aec62xx_pci_driver);
-}
-
-module_init(aec62xx_ide_init);
-module_exit(aec62xx_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
-MODULE_LICENSE("GPL");

drivers/ide/ali14xx.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 1996  Linus Torvalds & author (see below)
- */
-
-/*
- * ALI M14xx chipset EIDE controller
- *
- * Works for ALI M1439/1443/1445/1487/1489 chipsets.
- *
- * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
- * Derek's notes follow:
- *
- * I think the code should be pretty understandable,
- * but I'll be happy to (try to) answer questions.
- *
- * The critical part is in the setupDrive function.  The initRegisters
- * function doesn't seem to be necessary, but the DOS driver does it, so
- * I threw it in.
- *
- * I've only tested this on my system, which only has one disk.  I posted
- * it to comp.sys.linux.hardware, so maybe some other people will try it
- * out.
- *
- * Derek Noonburg  (derekn@ece.cmu.edu)
- * 95-sep-26
- *
- * Update 96-jul-13:
- *
- * I've since upgraded to two disks and a CD-ROM, with no trouble, and
- * I've also heard from several others who have used it successfully.
- * This driver appears to work with both the 1443/1445 and the 1487/1489
- * chipsets.  I've added support for PIO mode 4 for the 1487.  This
- * seems to work just fine on the 1443 also, although I'm not sure it's
- * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
- * mode 4 for a while now with no trouble.)  -Derek
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ali14xx"
-
-/* port addresses for auto-detection */
-#define ALI_NUM_PORTS 4
-static const int ports[ALI_NUM_PORTS] __initconst =
-	{ 0x074, 0x0f4, 0x034, 0x0e4 };
-
-/* register initialization data */
-typedef struct { u8 reg, data; } RegInitializer;
-
-static const RegInitializer initData[] __initconst = {
-	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
-	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
-	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
-	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
-	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
-	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
-	{0x35, 0x03}, {0x00, 0x00}
-};
-
-/* timing parameter registers for each drive */
-static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
-	{0x03, 0x26, 0x04, 0x27},     /* drive 0 */
-	{0x05, 0x28, 0x06, 0x29},     /* drive 1 */
-	{0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
-	{0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
-};
-
-static int basePort;	/* base port address */
-static int regPort;	/* port for register number */
-static int dataPort;	/* port for register data */
-static u8 regOn;	/* output to base port to access registers */
-static u8 regOff;	/* output to base port to close registers */
-
-/*------------------------------------------------------------------------*/
-
-/*
- * Read a controller register.
- */
-static inline u8 inReg(u8 reg)
-{
-	outb_p(reg, regPort);
-	return inb(dataPort);
-}
-
-/*
- * Write a controller register.
- */
-static void outReg(u8 data, u8 reg)
-{
-	outb_p(reg, regPort);
-	outb_p(data, dataPort);
-}
-
-static DEFINE_SPINLOCK(ali14xx_lock);
-
-/*
- * Set PIO mode for the specified drive.
- * This function computes timing parameters
- * and sets controller registers accordingly.
- */
-static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	int driveNum;
-	int time1, time2;
-	u8 param1, param2, param3, param4;
-	unsigned long flags;
-	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
-	/* calculate timing, according to PIO mode */
-	time1 = ide_pio_cycle_time(drive, pio);
-	time2 = t->active;
-	param3 = param1 = (time2 * bus_speed + 999) / 1000;
-	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
-	if (pio < 3) {
-		param3 += 8;
-		param4 += 8;
-	}
-	printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
-		drive->name, pio, time1, time2, param1, param2, param3, param4);
-
-	/* stuff timing parameters into controller registers */
-	driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
-	spin_lock_irqsave(&ali14xx_lock, flags);
-	outb_p(regOn, basePort);
-	outReg(param1, regTab[driveNum].reg1);
-	outReg(param2, regTab[driveNum].reg2);
-	outReg(param3, regTab[driveNum].reg3);
-	outReg(param4, regTab[driveNum].reg4);
-	outb_p(regOff, basePort);
-	spin_unlock_irqrestore(&ali14xx_lock, flags);
-}
-
-/*
- * Auto-detect the IDE controller port.
- */
-static int __init findPort(void)
-{
-	int i;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (i = 0; i < ALI_NUM_PORTS; ++i) {
-		basePort = ports[i];
-		regOff = inb(basePort);
-		for (regOn = 0x30; regOn <= 0x33; ++regOn) {
-			outb_p(regOn, basePort);
-			if (inb(basePort) == regOn) {
-				regPort = basePort + 4;
-				dataPort = basePort + 8;
-				t = inReg(0) & 0xf0;
-				outb_p(regOff, basePort);
-				local_irq_restore(flags);
-				if (t != 0x50)
-					return 0;
-				return 1;  /* success */
-			}
-		}
-		outb_p(regOff, basePort);
-	}
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * Initialize controller registers with default values.
- */
-static int __init initRegisters(void)
-{
-	const RegInitializer *p;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb_p(regOn, basePort);
-	for (p = initData; p->reg != 0; ++p)
-		outReg(p->data, p->reg);
-	outb_p(0x01, regPort);
-	t = inb(regPort) & 0x01;
-	outb_p(regOff, basePort);
-	local_irq_restore(flags);
-	return t;
-}
-
-static const struct ide_port_ops ali14xx_port_ops = {
-	.set_pio_mode		= ali14xx_set_pio_mode,
-};
-
-static const struct ide_port_info ali14xx_port_info = {
-	.name			= DRV_NAME,
-	.chipset		= ide_ali14xx,
-	.port_ops		= &ali14xx_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init ali14xx_probe(void)
-{
-	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
-			  basePort, regOn);
-
-	/* initialize controller registers */
-	if (!initRegisters()) {
-		printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
-		return 1;
-	}
-
-	return ide_legacy_device_add(&ali14xx_port_info, 0);
-}
-
-static bool probe_ali14xx;
-
-module_param_named(probe, probe_ali14xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
-
-static int __init ali14xx_init(void)
-{
-	if (probe_ali14xx == 0)
-		goto out;
-
-	/* auto-detect IDE controller port */
-	if (findPort()) {
-		if (ali14xx_probe())
-			return -ENODEV;
-		return 0;
-	}
-	printk(KERN_ERR "ali14xx: not found.\n");
-out:
-	return -ENODEV;
-}
-
-module_init(ali14xx_init);
-
-MODULE_AUTHOR("see local file");
-MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
-MODULE_LICENSE("GPL");

drivers/ide/atiixp.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
- *  Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "atiixp"
-
-#define ATIIXP_IDE_PIO_TIMING		0x40
-#define ATIIXP_IDE_MDMA_TIMING		0x44
-#define ATIIXP_IDE_PIO_CONTROL		0x48
-#define ATIIXP_IDE_PIO_MODE		0x4a
-#define ATIIXP_IDE_UDMA_CONTROL		0x54
-#define ATIIXP_IDE_UDMA_MODE		0x56
-
-struct atiixp_ide_timing {
-	u8 command_width;
-	u8 recover_width;
-};
-
-static struct atiixp_ide_timing pio_timing[] = {
-	{ 0x05, 0x0d },
-	{ 0x04, 0x07 },
-	{ 0x03, 0x04 },
-	{ 0x02, 0x02 },
-	{ 0x02, 0x00 },
-};
-
-static struct atiixp_ide_timing mdma_timing[] = {
-	{ 0x07, 0x07 },
-	{ 0x02, 0x01 },
-	{ 0x02, 0x00 },
-};
-
-static DEFINE_SPINLOCK(atiixp_lock);
-
-/**
- *	atiixp_set_pio_mode	-	set host controller for PIO mode
- *	@hwif: port
- *	@drive: drive
- *
- *	Set the interface PIO mode.
- */
-
-static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long flags;
-	int timing_shift = (drive->dn ^ 1) * 8;
-	u32 pio_timing_data;
-	u16 pio_mode_data;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-
-	spin_lock_irqsave(&atiixp_lock, flags);
-
-	pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
-	pio_mode_data &= ~(0x07 << (drive->dn * 4));
-	pio_mode_data |= (pio << (drive->dn * 4));
-	pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
-
-	pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
-	pio_timing_data &= ~(0xff << timing_shift);
-	pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
-		 (pio_timing[pio].command_width << (timing_shift + 4));
-	pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
-
-	spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-/**
- *	atiixp_set_dma_mode	-	set host controller for DMA mode
- *	@hwif: port
- *	@drive: drive
- *
- *	Set a ATIIXP host controller to the desired DMA mode.  This involves
- *	programming the right timing data into the PCI configuration space.
- */
-
-static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long flags;
-	int timing_shift = (drive->dn ^ 1) * 8;
-	u32 tmp32;
-	u16 tmp16;
-	u16 udma_ctl = 0;
-	const u8 speed = drive->dma_mode;
-
-	spin_lock_irqsave(&atiixp_lock, flags);
-
-	pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
-
-	if (speed >= XFER_UDMA_0) {
-		pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
-		tmp16 &= ~(0x07 << (drive->dn * 4));
-		tmp16 |= ((speed & 0x07) << (drive->dn * 4));
-		pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
-
-		udma_ctl |= (1 << drive->dn);
-	} else if (speed >= XFER_MW_DMA_0) {
-		u8 i = speed & 0x03;
-
-		pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
-		tmp32 &= ~(0xff << timing_shift);
-		tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
-			 (mdma_timing[i].command_width << (timing_shift + 4));
-		pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
-
-		udma_ctl &= ~(1 << drive->dn);
-	}
-
-	pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
-
-	spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	u8 udma_mode = 0, ch = hwif->channel;
-
-	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
-	if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
-		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops atiixp_port_ops = {
-	.set_pio_mode		= atiixp_set_pio_mode,
-	.set_dma_mode		= atiixp_set_dma_mode,
-	.cable_detect		= atiixp_cable_detect,
-};
-
-static const struct ide_port_info atiixp_pci_info[] = {
-	{	/* 0: IXP200/300/400/700 */
-		.name		= DRV_NAME,
-		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
-		.port_ops	= &atiixp_port_ops,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA5,
-	},
-	{	/* 1: IXP600 */
-		.name		= DRV_NAME,
-		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
-		.port_ops	= &atiixp_port_ops,
-		.host_flags	= IDE_HFLAG_SINGLE,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA5,
- 	},
-};
-
-/**
- *	atiixp_init_one	-	called when a ATIIXP is found
- *	@dev: the atiixp device
- *	@id: the matching pci id
- *
- *	Called when the PCI registration layer (or the IDE initialization)
- *	finds a device matching our IDE device tables.
- */
-
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
-}
-
-static const struct pci_device_id atiixp_pci_tbl[] = {
-	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 },
-	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 },
-	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
-	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
-	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
-	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-
-static struct pci_driver atiixp_pci_driver = {
-	.name		= "ATIIXP_IDE",
-	.id_table	= atiixp_pci_tbl,
-	.probe		= atiixp_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init atiixp_ide_init(void)
-{
-	return ide_pci_register_driver(&atiixp_pci_driver);
-}
-
-static void __exit atiixp_ide_exit(void)
-{
-	pci_unregister_driver(&atiixp_pci_driver);
-}
-
-module_init(atiixp_ide_init);
-module_exit(atiixp_ide_exit);
-
-MODULE_AUTHOR("HUI YU");
-MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
-MODULE_LICENSE("GPL");

drivers/ide/buddha.c

-/*
- *  Amiga Buddha, Catweasel and X-Surf IDE Driver
- *
- *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
- *
- *  This driver was written based on the specifications in README.buddha and
- *  the X-Surf info from Inside_XSurf.txt available at
- *  http://www.jschoenfeld.com
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *  TODO:
- *    - test it :-)
- *    - tune the timings using the speed-register
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-
-    /*
-     *  The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
-     */
-
-#define BUDDHA_NUM_HWIFS	2
-#define CATWEASEL_NUM_HWIFS	3
-#define XSURF_NUM_HWIFS         2
-
-#define MAX_NUM_HWIFS		3
-
-    /*
-     *  Bases of the IDE interfaces (relative to the board address)
-     */
-
-#define BUDDHA_BASE1	0x800
-#define BUDDHA_BASE2	0xa00
-#define BUDDHA_BASE3	0xc00
-
-#define XSURF_BASE1     0xb000 /* 2.5" Interface */
-#define XSURF_BASE2     0xd000 /* 3.5" Interface */
-
-static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
-};
-
-static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
-     XSURF_BASE1, XSURF_BASE2
-};
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define BUDDHA_CONTROL	0x11a
-
-    /*
-     *  Other registers
-     */
-
-#define BUDDHA_IRQ1	0xf00		/* MSB = 1, Harddisk is source of */
-#define BUDDHA_IRQ2	0xf40		/* interrupt */
-#define BUDDHA_IRQ3	0xf80
-
-#define XSURF_IRQ1      0x7e
-#define XSURF_IRQ2      0x7e
-
-static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
-};
-
-static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
-    XSURF_IRQ1, XSURF_IRQ2
-};
-
-#define BUDDHA_IRQ_MR	0xfc0		/* master interrupt enable */
-
-
-    /*
-     *  Board information
-     */
-
-typedef enum BuddhaType_Enum {
-    BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
-} BuddhaType;
-
-static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int buddha_test_irq(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-static void xsurf_clear_irq(ide_drive_t *drive)
-{
-    /*
-     * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
-     */
-    z_writeb(0, drive->hwif->io_ports.irq_addr);
-}
-
-static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
-				      unsigned long ctl, unsigned long irq_port)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = base;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = base + 2 + i * 4;
-
-	hw->io_ports.ctl_addr = ctl;
-	hw->io_ports.irq_addr = irq_port;
-
-	hw->irq = IRQ_AMIGA_PORTS;
-}
-
-static const struct ide_port_ops buddha_port_ops = {
-	.test_irq		= buddha_test_irq,
-};
-
-static const struct ide_port_ops xsurf_port_ops = {
-	.clear_irq		= xsurf_clear_irq,
-	.test_irq		= buddha_test_irq,
-};
-
-static const struct ide_port_info buddha_port_info = {
-	.port_ops		= &buddha_port_ops,
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-	.irq_flags		= IRQF_SHARED,
-	.chipset		= ide_generic,
-};
-
-    /*
-     *  Probe for a Buddha or Catweasel IDE interface
-     */
-
-static int __init buddha_init(void)
-{
-	struct zorro_dev *z = NULL;
-	u_long buddha_board = 0;
-	BuddhaType type;
-	int buddha_num_hwifs, i;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		unsigned long board;
-		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
-		struct ide_port_info d = buddha_port_info;
-
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
-			type=BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
-			type=BOARD_CATWEASEL;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			buddha_num_hwifs = XSURF_NUM_HWIFS;
-			type=BOARD_XSURF;
-			d.port_ops = &xsurf_port_ops;
-		} else 
-			continue;
-		
-		board = z->resource.start;
-
-		if(type != BOARD_XSURF) {
-			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
-				continue;
-		} else {
-			if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
-				continue;
-			if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
-				goto fail_base2;
-			if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
-				release_mem_region(board+XSURF_BASE2, 0x1000);
-fail_base2:
-				release_mem_region(board+XSURF_BASE1, 0x1000);
-				continue;
-			}
-		}	  
-		buddha_board = (unsigned long)ZTWO_VADDR(board);
-		
-		/* write to BUDDHA_IRQ_MR to enable the board IRQ */
-		/* X-Surf doesn't have this.  IRQs are always on */
-		if (type != BOARD_XSURF)
-			z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
-
-		printk(KERN_INFO "ide: %s IDE controller\n",
-				 buddha_board_name[type]);
-
-		for (i = 0; i < buddha_num_hwifs; i++) {
-			unsigned long base, ctl, irq_port;
-
-			if (type != BOARD_XSURF) {
-				base = buddha_board + buddha_bases[i];
-				ctl = base + BUDDHA_CONTROL;
-				irq_port = buddha_board + buddha_irqports[i];
-			} else {
-				base = buddha_board + xsurf_bases[i];
-				/* X-Surf has no CS1* (Control/AltStat) */
-				ctl = 0;
-				irq_port = buddha_board + xsurf_irqports[i];
-			}
-
-			buddha_setup_ports(&hw[i], base, ctl, irq_port);
-
-			hws[i] = &hw[i];
-		}
-
-		ide_host_add(&d, hws, i, NULL);
-	}
-
-	return 0;
-}
-
-module_init(buddha_init);
-
-MODULE_LICENSE("GPL");