Merge tag 'hwmon-for-v6.8-rc3' of...

Merge tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - pmbus/mp2975: Fix driver initialization

 - gigabyte_waterforce: Add missing unlock in error handling path

* tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'
  hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device
  hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()

drivers/hwmon/gigabyte_waterforce.c

@@ -146,7 +146,7 @@ static int waterforce_get_status(struct waterforce_data *priv)
 	/* Send command for getting status */
 	ret = waterforce_write_expanded(priv, get_status_cmd, GET_STATUS_CMD_LENGTH);
 	if (ret < 0)
-		return ret;
+		goto unlock_and_return;
 
 	ret = wait_for_completion_interruptible_timeout(&priv->status_report_received,
 							msecs_to_jiffies(STATUS_VALIDITY));

drivers/hwmon/pmbus/mp2975.c

@@ -126,6 +126,21 @@ static const struct regulator_desc __maybe_unused mp2975_reg_desc[] = {
 
 #define to_mp2975_data(x)  container_of(x, struct mp2975_data, info)
 
+static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * Report direct format as configured by MFR_DC_LOOP_CTRL.
+		 * Unlike on MP2971/MP2973 the reported VOUT_MODE isn't automatically
+		 * internally updated, but always reads as PB_VOUT_MODE_VID.
+		 */
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		return -ENODATA;
+	}
+}
+
 static int
 mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg,
 			u16 mask)
@@ -869,6 +884,7 @@ static struct pmbus_driver_info mp2975_info = {
 		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
 		PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL,
+	.read_byte_data = mp2975_read_byte_data,
 	.read_word_data = mp2975_read_word_data,
 #if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)
 	.num_regulators = 1,