Merge tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification
   - convert simple-battery DT binding to YAML
   - add long-life charging mode

 Battery/charger drivers:
   - bq25150: new charger driver
   - bq27xxx: add support for BQ27z561 and BQ28z610
   - max17040: support CAPACITY_ALERT_MIN
   - sbs-battery: add PEC support
   - wilco-ec: support long-life charging mode
   - bq25890: fix DT binding
   - misc. fixes and cleanups

 Reset drivers:
   - linkstation: new reset driver"

* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
  power: supply: wilco_ec: Add long life charging mode
  power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor
  dt-bindings: power: Add BQ28z610 compatible
  power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor
  dt-bindings: power: Add BQ27Z561 compatible
  power: supply: test_power: Fix battery_current initial value
  power: supply: Fix kerneldoc of power_supply_temp2resist_simple()
  power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated()
  dt-bindings: power: Convert battery.txt to battery.yaml
  power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()
  power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN
  power: supply: check if calc_soc succeeded in pm860x_init_battery
  power: supply: bq2xxxx: Replace HTTP links with HTTPS ones
  power: reset: add driver for LinkStation power off
  power: supply: sc27xx: prevent adc * 1000 from overflow
  math64: New DIV_S64_ROUND_CLOSEST helper
  power: fix duplicated words in bq2415x_charger.h
  power: Convert to DEFINE_SHOW_ATTRIBUTE
  power: reset: keystone-reset: Replace HTTP links with HTTPS ones
  power: supply: bq25150 introduce the bq25150
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -205,7 +205,8 @@ Description:
 		Valid values: "Unknown", "Good", "Overheat", "Dead",
 			      "Over voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
-			      "Over current", "Calibration required"
+			      "Over current", "Calibration required", "Warm",
+			      "Cool", "Hot"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017

Documentation/ABI/testing/sysfs-class-power-wilco

@@ -14,6 +14,10 @@ Description:
 			Charging begins when level drops below
 			charge_control_start_threshold, and ceases when
 			level is above charge_control_end_threshold.
+		Long Life: Customized charge rate for last longer battery life.
+			On Wilco device this mode is pre-configured in the factory
+			through EC's private PID. Swiching to a different mode will
+			be denied by Wilco EC when Long Life mode is enabled.
 
 What:		/sys/class/power_supply/wilco-charger/charge_control_start_threshold
 Date:		April 2019

Documentation/devicetree/bindings/power/supply/battery.txt

-Battery Characteristics
-
-The devicetree battery node provides static battery characteristics.
-In smart batteries, these are typically stored in non-volatile memory
-on a fuel gauge chip. The battery node should be used where there is
-no appropriate non-volatile memory, or it is unprogrammed/incorrect.
-
-Upstream dts files should not include battery nodes, unless the battery
-represented cannot easily be replaced in the system by one of a
-different type. This prevents unpredictable, potentially harmful,
-behavior should a replacement that changes the battery type occur
-without a corresponding update to the dtb.
+The contents of this file has been moved to battery.yaml
 
 Please note that not all charger drivers respect all of the properties.
-
-Required Properties:
- - compatible: Must be "simple-battery"
-
-Optional Properties:
- - over-voltage-threshold-microvolt: battery over-voltage limit
- - re-charge-voltage-microvolt: limit to automatically start charging again
- - voltage-min-design-microvolt: drained battery voltage
- - voltage-max-design-microvolt: fully charged battery voltage
- - energy-full-design-microwatt-hours: battery design energy
- - charge-full-design-microamp-hours: battery design capacity
- - trickle-charge-current-microamp: current for trickle-charge phase
- - precharge-current-microamp: current for pre-charge phase
- - precharge-upper-limit-microvolt: limit when to change to constant charging
- - charge-term-current-microamp: current for charge termination phase
- - constant-charge-current-max-microamp: maximum constant input current
- - constant-charge-voltage-max-microvolt: maximum constant input voltage
- - factory-internal-resistance-micro-ohms: battery factory internal resistance
- - ocv-capacity-table-0: An array providing the open circuit voltage (OCV)
-   of the battery and corresponding battery capacity percent, which is used
-   to look up battery capacity according to current OCV value. And the open
-   circuit voltage unit is microvolt.
- - ocv-capacity-table-1: Same as ocv-capacity-table-0
- ......
- - ocv-capacity-table-n: Same as ocv-capacity-table-0
- - ocv-capacity-celsius: An array containing the temperature in degree Celsius,
-   for each of the battery capacity lookup table. The first temperature value
-   specifies the OCV table 0, and the second temperature value specifies the
-   OCV table 1, and so on.
- - resistance-temp-table: An array providing the temperature in degree Celsius
-   and corresponding battery internal resistance percent, which is used to look
-   up the resistance percent according to current temperature to get a accurate
-   batterty internal resistance in different temperatures.
-
-Battery properties are named, where possible, for the corresponding
-elements in enum power_supply_property, defined in
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h
-
-Batteries must be referenced by chargers and/or fuel-gauges
-using a phandle. The phandle's property should be named
-"monitored-battery".
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		voltage-max-design-microvolt = <4200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-		precharge-current-microamp = <256000>;
-		charge-term-current-microamp = <128000>;
-		constant-charge-current-max-microamp = <900000>;
-		constant-charge-voltage-max-microvolt = <4200000>;
-		factory-internal-resistance-micro-ohms = <250000>;
-		ocv-capacity-celsius = <(-10) 0 10>;
-		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
-		ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
-		ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
-		resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
-	};
-
-	charger: charger@11 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};
-
-	fuel_gauge: fuel-gauge@22 {
-		....
-		monitored-battery = <&bat>;
-		...
-	};

Documentation/devicetree/bindings/power/supply/battery.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The devicetree battery node provides static battery characteristics.
+  In smart batteries, these are typically stored in non-volatile memory
+  on a fuel gauge chip. The battery node should be used where there is
+  no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+  Upstream dts files should not include battery nodes, unless the battery
+  represented cannot easily be replaced in the system by one of a
+  different type. This prevents unpredictable, potentially harmful,
+  behavior should a replacement that changes the battery type occur
+  without a corresponding update to the dtb.
+
+  Battery properties are named, where possible, for the corresponding elements
+  in enum power_supply_property, defined in include/linux/power_supply.h
+
+  Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+  The phandle's property should be named "monitored-battery".
+
+properties:
+  compatible:
+    const: simple-battery
+
+  over-voltage-threshold-microvolt:
+    description: battery over-voltage limit
+
+  re-charge-voltage-microvolt:
+    description: limit to automatically start charging again
+
+  voltage-min-design-microvolt:
+    description: drained battery voltage
+
+  voltage-max-design-microvolt:
+    description: fully charged battery voltage
+
+  energy-full-design-microwatt-hours:
+    description: battery design energy
+
+  charge-full-design-microamp-hours:
+    description: battery design capacity
+
+  trickle-charge-current-microamp:
+    description: current for trickle-charge phase
+
+  precharge-current-microamp:
+    description: current for pre-charge phase
+
+  precharge-upper-limit-microvolt:
+    description: limit when to change to constant charging
+
+  charge-term-current-microamp:
+    description: current for charge termination phase
+
+  constant-charge-current-max-microamp:
+    description: maximum constant input current
+
+  constant-charge-voltage-max-microvolt:
+    description: maximum constant input voltage
+
+  factory-internal-resistance-micro-ohms:
+    description: battery factory internal resistance
+
+  resistance-temp-table:
+    description: |
+      An array providing the temperature in degree Celsius
+      and corresponding battery internal resistance percent, which is used to
+      look up the resistance percent according to current temperature to get an
+      accurate batterty internal resistance in different temperatures.
+
+  ocv-capacity-celsius:
+    description: |
+      An array containing the temperature in degree Celsius,
+      for each of the battery capacity lookup table.
+
+required:
+  - compatible
+
+patternProperties:
+  '^ocv-capacity-table-[0-9]+$':
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      An array providing the open circuit voltage (OCV)
+      of the battery and corresponding battery capacity percent, which is used
+      to look up battery capacity according to current OCV value. And the open
+      circuit voltage unit is microvolt.
+    maxItems: 100
+    items:
+      items:
+        - description: open circuit voltage (OCV) in microvolts
+        - description: battery capacity percent
+          maximum: 100
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "simple-battery";
+        over-voltage-threshold-microvolt = <4500000>;
+        re-charge-voltage-microvolt = <250000>;
+        voltage-min-design-microvolt = <3200000>;
+        voltage-max-design-microvolt = <4200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+        precharge-current-microamp = <256000>;
+        precharge-upper-limit-microvolt = <2500000>;
+        charge-term-current-microamp = <128000>;
+        constant-charge-current-max-microamp = <900000>;
+        constant-charge-voltage-max-microvolt = <4200000>;
+        factory-internal-resistance-micro-ohms = <250000>;
+        ocv-capacity-celsius = <(-10) 0 10>;
+        /* table for -10 degree Celsius */
+        ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+        /* table for 0 degree Celsius */
+        ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+        /* table for 10 degree Celsius */
+        ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+        resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+
+      fuel-gauge@22 {
+        reg = <0x22>;
+        monitored-battery = <&battery>;
+      };
+    };

Documentation/devicetree/bindings/power/supply/bq2515x.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+  The BQ2515x family is a highly integrated battery charge management IC that
+  integrates the most common functions for wearable devices, namely a charger,
+  an output voltage rail, ADC for battery and system monitoring, and
+  push-button controller.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/bq25150.pdf
+    http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25150
+      - ti,bq25155
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  ac-detect-gpios:
+    description: |
+       GPIO used for connecting the bq2515x device PG (AC Detect)
+       pin.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO used for low power mode of IC.
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  input-current-limit-microamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum input current in micro Amps.
+    minimum: 50000
+    maximum: 500000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <50000>;
+      precharge-current-microamp = <2500>;
+      constant-charge-voltage-max-microvolt = <4000000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25150: charger@6b {
+        compatible = "ti,bq25150";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+        input-current-limit-microamp = <100000>;
+
+        ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+        powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+        charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+      };
+    };

Documentation/devicetree/bindings/power/supply/bq25890.txt

@@ -10,6 +10,7 @@ Required properties:
     * "ti,bq25895"
     * "ti,bq25896"
 - reg: integer, i2c address of the device.
+- interrupts: interrupt line;
 - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
 - ti,charge-current: integer, maximum charging current (in uA);
 - ti,termination-current: integer, charge will be terminated when current in
@@ -39,6 +40,9 @@ bq25890 {
 	compatible = "ti,bq25890";
 	reg = <0x6a>;
 
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
 	ti,battery-regulation-voltage = <4200000>;
 	ti,charge-current = <1000000>;
 	ti,termination-current = <50000>;

Documentation/devicetree/bindings/power/supply/bq27xxx.yaml

@@ -49,6 +49,8 @@ properties:
       - ti,bq27426
       - ti,bq27441
       - ti,bq27621
+      - ti,bq27z561
+      - ti,bq28z610
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/power/supply/gpio-charger.txt

-gpio-charger
-
-Required properties :
- - compatible : "gpio-charger"
- - gpios : GPIO indicating the charger presence.
-   See GPIO binding in bindings/gpio/gpio.txt .
- - charger-type : power supply type, one of
-     unknown
-     battery
-     ups
-     mains
-     usb-sdp (USB standard downstream port)
-     usb-dcp (USB dedicated charging port)
-     usb-cdp (USB charging downstream port)
-     usb-aca (USB accessory charger adapter)
-
-Optional properties:
- - charge-status-gpios: GPIO indicating whether a battery is charging.
-
-Example:
-
-	usb_charger: charger {
-		compatible = "gpio-charger";
-		charger-type = "usb-sdp";
-		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
-		charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
-	};
-
-	battery {
-		power-supplies = <&usb_charger>;
-	};

Documentation/devicetree/bindings/power/supply/gpio-charger.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  This binding is for all chargers, which are working more or less
+  autonomously, only providing some status GPIOs and possibly some
+  GPIOs for limited control over the charging process.
+
+properties:
+  compatible:
+    const: gpio-charger
+
+  charger-type:
+    enum:
+      - unknown
+      - battery
+      - ups
+      - mains
+      - usb-sdp                   # USB standard downstream port
+      - usb-dcp                   # USB dedicated charging port
+      - usb-cdp                   # USB charging downstream port
+      - usb-aca                   # USB accessory charger adapter
+    description:
+      Type of the charger, e.g. "mains" for a wall charger.
+
+  gpios:
+    maxItems: 1
+    description: GPIO indicating the charger presence
+
+  charge-status-gpios:
+    maxItems: 1
+    description: GPIO indicating the charging status
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+    - gpios
+  - required:
+    - charge-status-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    charger {
+      compatible = "gpio-charger";
+      charger-type = "usb-sdp";
+
+      gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+      charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+    };

drivers/power/reset/Kconfig

@@ -99,6 +99,17 @@ config POWER_RESET_HISI
 	help
 	  Reboot support for Hisilicon boards.
 
+config POWER_RESET_LINKSTATION
+	tristate "Buffalo LinkStation power-off driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF_MDIO && PHYLIB
+	help
+	  This driver supports turning off some Buffalo LinkStations by
+	  setting an output pin at the ethernet PHY to the correct state.
+	  It also makes the device compatible with the WoL function.
+
+	  Say Y here if you have a Buffalo LinkStation LS421D/E.
+
 config POWER_RESET_MSM
 	bool "Qualcomm MSM power-off driver"
 	depends on ARCH_QCOM

drivers/power/reset/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o

drivers/power/reset/keystone-reset.c

@@ -2,7 +2,7 @@
 /*
  * TI keystone reboot driver
  *
- * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated. https://www.ti.com/
  *
  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
  */

drivers/power/reset/linkstation-poweroff.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LinkStation power off restart driver
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+#include <linux/phy.h>
+
+/* Defines from the eth phy Marvell driver */
+#define MII_MARVELL_COPPER_PAGE		0
+#define MII_MARVELL_LED_PAGE		3
+#define MII_MARVELL_WOL_PAGE		17
+#define MII_MARVELL_PHY_PAGE		22
+
+#define MII_PHY_LED_CTRL		16
+#define MII_88E1318S_PHY_LED_TCR	18
+#define MII_88E1318S_PHY_WOL_CTRL	16
+#define MII_M1011_IEVENT		19
+
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE		BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS	BIT(12)
+#define LED2_FORCE_ON					(0x8 << 8)
+#define LEDMASK						GENMASK(11,8)
+
+static struct phy_device *phydev;
+
+static void mvphy_reg_intn(u16 data)
+{
+	int rc = 0, saved_page;
+
+	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
+	if (saved_page < 0)
+		goto err;
+
+	/* Force manual LED2 control to let INTn work */
+	__phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
+
+	/* Set the LED[2]/INTn pin to the required state */
+	__phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
+		     MII_88E1318S_PHY_LED_TCR_FORCE_INT,
+		     MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
+
+	if (!data) {
+		/* Clear interrupts to ensure INTn won't be holded in high state */
+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
+		__phy_read(phydev, MII_M1011_IEVENT);
+
+		/* If WOL was enabled and a magic packet was received before powering
+		 * off, we won't be able to wake up by sending another magic packet.
+		 * Clear WOL status.
+		 */
+		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
+		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+	}
+err:
+	rc = phy_restore_page(phydev, saved_page, rc);
+	if (rc < 0)
+		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
+}
+
+static int linkstation_reboot_notifier(struct notifier_block *nb,
+				       unsigned long action, void *unused)
+{
+	if (action == SYS_RESTART)
+		mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block linkstation_reboot_nb = {
+	.notifier_call = linkstation_reboot_notifier,
+};
+
+static void linkstation_poweroff(void)
+{
+	unregister_reboot_notifier(&linkstation_reboot_nb);
+	mvphy_reg_intn(0);
+
+	kernel_restart("Power off");
+}
+
+static const struct of_device_id ls_poweroff_of_match[] = {
+	{ .compatible = "buffalo,ls421d" },
+	{ .compatible = "buffalo,ls421de" },
+	{ },
+};
+
+static int __init linkstation_poweroff_init(void)
+{
+	struct mii_bus *bus;
+	struct device_node *dn;
+
+	dn = of_find_matching_node(NULL, ls_poweroff_of_match);
+	if (!dn)
+		return -ENODEV;
+	of_node_put(dn);
+
+	dn = of_find_node_by_name(NULL, "mdio");
+	if (!dn)
+		return -ENODEV;
+
+	bus = of_mdio_find_bus(dn);
+	of_node_put(dn);
+	if (!bus)
+		return -EPROBE_DEFER;
+
+	phydev = phy_find_first(bus);
+	if (!phydev)
+		return -EPROBE_DEFER;
+
+	register_reboot_notifier(&linkstation_reboot_nb);
+	pm_power_off = linkstation_poweroff;
+
+	return 0;
+}
+
+static void __exit linkstation_poweroff_exit(void)
+{
+	pm_power_off = NULL;
+	unregister_reboot_notifier(&linkstation_reboot_nb);
+}
+
+module_init(linkstation_poweroff_init);
+module_exit(linkstation_poweroff_exit);
+
+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
+MODULE_DESCRIPTION("LinkStation power off driver");
+MODULE_LICENSE("GPL v2");

drivers/power/supply/88pm860x_battery.c

@@ -433,7 +433,7 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	int ret;
 	int data;
 	int bat_remove;
-	int soc;
+	int soc = 0;
 
 	/* measure enable on GPADC1 */
 	data = MEAS1_GP1;
@@ -496,7 +496,9 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	}
 	mutex_unlock(&info->lock);
 
-	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	if (ret < 0)
+		goto out;
 
 	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
 	bat_remove = data & BAT_WU_LOG;

drivers/power/supply/Kconfig

@@ -610,6 +610,19 @@ config CHARGER_BQ24735
 	help
 	  Say Y to enable support for the TI BQ24735 battery charger.
 
+config CHARGER_BQ2515X
+	tristate "TI BQ2515X battery charger family"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ2515X family of battery
+	  charging integrated circuits. The BQ2515X are highly integrated
+	  battery charge management ICs that integrate the most common
+	  functions for wearable devices, namely a charger, an output voltage
+	  rail, ADC for battery and system monitoring, and push-button
+	  controller.
+
 config CHARGER_BQ25890
 	tristate "TI BQ25890 battery charger driver"
 	depends on I2C

drivers/power/supply/Makefile

@@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
 obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
 obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o

drivers/power/supply/axp20x_usb_power.c

@@ -78,7 +78,7 @@ static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
 	/*
 	 * Polling is only necessary while VBUS is offline. While online, a
 	 * present->absent transition implies an online->offline transition
-	 * and will triger the VBUS_REMOVAL IRQ.
+	 * and will trigger the VBUS_REMOVAL IRQ.
 	 */
 	if (power->axp20x_id >= AXP221_ID && !power->online)
 		return true;

drivers/power/supply/bq2415x_charger.c

@@ -5,14 +5,14 @@
  * Copyright (C) 2011-2013  Pali Rohár <pali@kernel.org>
  *
  * Datasheets:
- * http://www.ti.com/product/bq24150
- * http://www.ti.com/product/bq24150a
- * http://www.ti.com/product/bq24152
- * http://www.ti.com/product/bq24153
- * http://www.ti.com/product/bq24153a
- * http://www.ti.com/product/bq24155
- * http://www.ti.com/product/bq24157s
- * http://www.ti.com/product/bq24158
+ * https://www.ti.com/product/bq24150
+ * https://www.ti.com/product/bq24150a
+ * https://www.ti.com/product/bq24152
+ * https://www.ti.com/product/bq24153
+ * https://www.ti.com/product/bq24153a
+ * https://www.ti.com/product/bq24155
+ * https://www.ti.com/product/bq24157s
+ * https://www.ti.com/product/bq24158
  */
 
 #include <linux/kernel.h>

drivers/power/supply/bq24190_charger.c

@@ -481,8 +481,10 @@ static ssize_t bq24190_sysfs_store(struct device *dev,
 		return ret;
 
 	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(bdi->dev);
 		return ret;
+	}
 
 	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
 	if (ret)

drivers/power/supply/bq24257_charger.c

@@ -5,9 +5,9 @@
  * Copyright (C) 2015 Intel Corporation
  *
  * Datasheets:
- * http://www.ti.com/product/bq24250
- * http://www.ti.com/product/bq24251
- * http://www.ti.com/product/bq24257
+ * https://www.ti.com/product/bq24250
+ * https://www.ti.com/product/bq24251
+ * https://www.ti.com/product/bq24257
  */
 
 #include <linux/module.h>

drivers/power/supply/bq27xxx_battery.c

@@ -18,31 +18,33 @@
  * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  *
  * Datasheets:
- * http://www.ti.com/product/bq27000
- * http://www.ti.com/product/bq27200
- * http://www.ti.com/product/bq27010
- * http://www.ti.com/product/bq27210
- * http://www.ti.com/product/bq27500
- * http://www.ti.com/product/bq27510-g1
- * http://www.ti.com/product/bq27510-g2
- * http://www.ti.com/product/bq27510-g3
- * http://www.ti.com/product/bq27520-g1
- * http://www.ti.com/product/bq27520-g2
- * http://www.ti.com/product/bq27520-g3
- * http://www.ti.com/product/bq27520-g4
- * http://www.ti.com/product/bq27530-g1
- * http://www.ti.com/product/bq27531-g1
- * http://www.ti.com/product/bq27541-g1
- * http://www.ti.com/product/bq27542-g1
- * http://www.ti.com/product/bq27546-g1
- * http://www.ti.com/product/bq27742-g1
- * http://www.ti.com/product/bq27545-g1
- * http://www.ti.com/product/bq27421-g1
- * http://www.ti.com/product/bq27425-g1
- * http://www.ti.com/product/bq27426
- * http://www.ti.com/product/bq27411-g1
- * http://www.ti.com/product/bq27441-g1
- * http://www.ti.com/product/bq27621-g1
+ * https://www.ti.com/product/bq27000
+ * https://www.ti.com/product/bq27200
+ * https://www.ti.com/product/bq27010
+ * https://www.ti.com/product/bq27210
+ * https://www.ti.com/product/bq27500
+ * https://www.ti.com/product/bq27510-g1
+ * https://www.ti.com/product/bq27510-g2
+ * https://www.ti.com/product/bq27510-g3
+ * https://www.ti.com/product/bq27520-g1
+ * https://www.ti.com/product/bq27520-g2
+ * https://www.ti.com/product/bq27520-g3
+ * https://www.ti.com/product/bq27520-g4
+ * https://www.ti.com/product/bq27530-g1
+ * https://www.ti.com/product/bq27531-g1
+ * https://www.ti.com/product/bq27541-g1
+ * https://www.ti.com/product/bq27542-g1
+ * https://www.ti.com/product/bq27546-g1
+ * https://www.ti.com/product/bq27742-g1
+ * https://www.ti.com/product/bq27545-g1
+ * https://www.ti.com/product/bq27421-g1
+ * https://www.ti.com/product/bq27425-g1
+ * https://www.ti.com/product/bq27426
+ * https://www.ti.com/product/bq27411-g1
+ * https://www.ti.com/product/bq27441-g1
+ * https://www.ti.com/product/bq27621-g1
+ * https://www.ti.com/product/bq27z561
+ * https://www.ti.com/product/bq28z610
  */
 
 #include <linux/device.h>
@@ -79,6 +81,11 @@
 #define BQ27000_FLAG_FC		BIT(5)
 #define BQ27000_FLAG_CHGS	BIT(7) /* Charge state flag */
 
+/* BQ27Z561 has different layout for Flags register */
+#define BQ27Z561_FLAG_FDC	BIT(4) /* Battery fully discharged */
+#define BQ27Z561_FLAG_FC		BIT(5) /* Battery fully charged */
+#define BQ27Z561_FLAG_DIS_CH	BIT(6) /* Battery is discharging */
+
 /* control register params */
 #define BQ27XXX_SEALED			0x20
 #define BQ27XXX_SET_CFGUPDATE		0x13
@@ -431,12 +438,52 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x18,
 		BQ27XXX_DM_REG_ROWS,
-	};
+	},
 #define bq27411_regs bq27421_regs
 #define bq27425_regs bq27421_regs
 #define bq27426_regs bq27421_regs
 #define bq27441_regs bq27421_regs
 #define bq27621_regs bq27421_regs
+	bq27z561_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq28z610_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	};
 
 static enum power_supply_property bq27000_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
@@ -672,6 +719,44 @@ static enum power_supply_property bq27421_props[] = {
 #define bq27441_props bq27421_props
 #define bq27621_props bq27421_props
 
+static enum power_supply_property bq27z561_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq28z610_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -767,11 +852,15 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #define bq27621_dm_regs 0
 #endif
 
+#define bq27z561_dm_regs 0
+#define bq28z610_dm_regs 0
+
 #define BQ27XXX_O_ZERO	0x00000001
 #define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
 #define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
 #define BQ27XXX_O_CFGUP	0x00000008
 #define BQ27XXX_O_RAM	0x00000010
+#define BQ27Z561_O_BITS	0x00000020
 
 #define BQ27XXX_DATA(ref, key, opt) {		\
 	.opts = (opt),				\
@@ -816,6 +905,8 @@ static struct {
 	[BQ27426]   = BQ27XXX_DATA(bq27426,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27441]   = BQ27XXX_DATA(bq27441,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
+	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -1551,6 +1642,8 @@ static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
 {
 	if (di->opts & BQ27XXX_O_ZERO)
 		return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF);
+	else if (di->opts & BQ27Z561_O_BITS)
+		return flags & BQ27Z561_FLAG_FDC;
 	else
 		return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
 }
@@ -1595,6 +1688,7 @@ void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 				cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
 			if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
 				cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
+
 			cache.charge_full = bq27xxx_battery_read_fcc(di);
 			cache.capacity = bq27xxx_battery_read_soc(di);
 			if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
@@ -1682,6 +1776,13 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
+	} else if (di->opts & BQ27Z561_O_BITS) {
+		if (di->cache.flags & BQ27Z561_FLAG_FC)
+			status = POWER_SUPPLY_STATUS_FULL;
+		else if (di->cache.flags & BQ27Z561_FLAG_DIS_CH)
+			status = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			status = POWER_SUPPLY_STATUS_CHARGING;
 	} else {
 		if (di->cache.flags & BQ27XXX_FLAG_FC)
 			status = POWER_SUPPLY_STATUS_FULL;
@@ -1710,6 +1811,13 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
 			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 		else
 			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	} else if (di->opts & BQ27Z561_O_BITS) {
+		if (di->cache.flags & BQ27Z561_FLAG_FC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (di->cache.flags & BQ27Z561_FLAG_FDC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else
+			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 	} else {
 		if (di->cache.flags & BQ27XXX_FLAG_FC)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;

drivers/power/supply/bq27xxx_battery_hdq.c

 /*
  * BQ27xxx battery monitor HDQ/1-wire driver
  *
- * Copyright (C) 2007-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

drivers/power/supply/bq27xxx_battery_i2c.c

 /*
  * BQ27xxx battery monitor I2C driver
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -253,6 +253,8 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27426", BQ27426 },
 	{ "bq27441", BQ27441 },
 	{ "bq27621", BQ27621 },
+	{ "bq27z561", BQ27Z561 },
+	{ "bq28z610", BQ28Z610 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -286,6 +288,8 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27426" },
 	{ .compatible = "ti,bq27441" },
 	{ .compatible = "ti,bq27621" },
+	{ .compatible = "ti,bq27z561" },
+	{ .compatible = "ti,bq28z610" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);

drivers/power/supply/cpcap-battery.c

@@ -274,7 +274,7 @@ static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata,
 /**
  * cpcap_battery_read_accumulated - reads cpcap coulomb counter
  * @ddata: device driver data
- * @regs: coulomb counter values
+ * @ccd: coulomb counter values
  *
  * Based on Motorola mapphone kernel function data_read_regs().
  * Looking at the registers, the coulomb counter seems similar to

drivers/power/supply/da9030_battery.c

@@ -172,17 +172,7 @@ static int bat_debug_show(struct seq_file *s, void *data)
 	return 0;
 }
 
-static int debug_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, bat_debug_show, inode->i_private);
-}
-
-static const struct file_operations bat_debug_fops = {
-	.open		= debug_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(bat_debug);
 
 static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
 {

drivers/power/supply/gpio-charger.c

@@ -112,9 +112,14 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
 	return irq;
 }
 
+/*
+ * The entries will be overwritten by driver's probe routine depending
+ * on the available features. This list ensures, that the array is big
+ * enough for all optional features.
+ */
 static enum power_supply_property gpio_charger_properties[] = {
 	POWER_SUPPLY_PROP_ONLINE,
-	POWER_SUPPLY_PROP_STATUS /* Must always be last in the array. */
+	POWER_SUPPLY_PROP_STATUS,
 };
 
 static int gpio_charger_probe(struct platform_device *pdev)
@@ -128,6 +133,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	int charge_status_irq;
 	unsigned long flags;
 	int ret;
+	int num_props = 0;
 
 	if (!pdata && !dev->of_node) {
 		dev_err(dev, "No platform data\n");
@@ -142,13 +148,13 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	 * This will fetch a GPIO descriptor from device tree, ACPI or
 	 * boardfile descriptor tables. It's good to try this first.
 	 */
-	gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
 
 	/*
-	 * If this fails and we're not using device tree, try the
-	 * legacy platform data method.
+	 * Fallback to legacy platform data method, if no GPIO is specified
+	 * using boardfile descriptor tables.
 	 */
-	if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
+	if (!gpio_charger->gpiod && pdata) {
 		/* Non-DT: use legacy GPIO numbers */
 		if (!gpio_is_valid(pdata->gpio)) {
 			dev_err(dev, "Invalid gpio pin in pdata\n");
@@ -173,17 +179,23 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		return PTR_ERR(gpio_charger->gpiod);
 	}
 
+	if (gpio_charger->gpiod) {
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
+		num_props++;
+	}
+
 	charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
+	if (IS_ERR(charge_status))
+		return PTR_ERR(charge_status);
+	if (charge_status) {
 		gpio_charger->charge_status = charge_status;
-	if (IS_ERR(gpio_charger->charge_status))
-		return PTR_ERR(gpio_charger->charge_status);
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
+		num_props++;
+	}
 
 	charger_desc = &gpio_charger->charger_desc;
 	charger_desc->properties = gpio_charger_properties;
-	charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
-	/* Remove POWER_SUPPLY_PROP_STATUS from the supported properties. */
-	if (!gpio_charger->charge_status)
-		charger_desc->num_properties -= 1;
+	charger_desc->num_properties = num_props;
 	charger_desc->get_property = gpio_charger_get_property;
 
 	psy_cfg.of_node = dev->of_node;
@@ -269,6 +281,6 @@ static struct platform_driver gpio_charger_driver = {
 module_platform_driver(gpio_charger_driver);
 
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");
+MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:gpio-charger");

drivers/power/supply/max17040_battery.c

@@ -69,6 +69,9 @@ static int max17040_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CAPACITY:
 		val->intval = chip->soc;
 		break;
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		val->intval = chip->low_soc_alert;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -256,17 +259,55 @@ static int max17040_enable_alert_irq(struct max17040_chip *chip)
 	return ret;
 }
 
+static int max17040_prop_writeable(struct power_supply *psy,
+				   enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static int max17040_set_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    const union power_supply_propval *val)
+{
+	struct max17040_chip *chip = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		/* alert threshold can be programmed from 1% up to 32% */
+		if ((val->intval < 1) || (val->intval > 32)) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = max17040_set_low_soc_alert(chip->client, val->intval);
+		chip->low_soc_alert = val->intval;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 static enum power_supply_property max17040_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
 };
 
 static const struct power_supply_desc max17040_battery_desc = {
 	.name			= "battery",
 	.type			= POWER_SUPPLY_TYPE_BATTERY,
 	.get_property		= max17040_get_property,
+	.set_property		= max17040_set_property,
+	.property_is_writeable  = max17040_prop_writeable,
 	.properties		= max17040_battery_props,
 	.num_properties		= ARRAY_SIZE(max17040_battery_props),
 };

drivers/power/supply/max8998_charger.c

@@ -23,6 +23,7 @@ struct max8998_battery_data {
 static enum power_supply_property max8998_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
 	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+	POWER_SUPPLY_PROP_STATUS, /* charger is charging/discharging/full */
 };
 
 /* Note that the charger control is done by a current regulator "CHARGER" */
@@ -49,10 +50,28 @@ static int max8998_battery_get_property(struct power_supply *psy,
 		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
 		if (ret)
 			return ret;
-		if (reg & (1 << 3))
+
+		if (reg & (1 << 5))
+			val->intval = 1;
+		else
 			val->intval = 0;
+
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+
+		if (!(reg & (1 << 5))) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		} else {
+			if (reg & (1 << 6))
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else if (reg & (1 << 3))
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
 			else
-			val->intval = 1;
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
 		break;
 	default:
 		return -EINVAL;

drivers/power/supply/power_supply_core.c

@@ -733,7 +733,7 @@ EXPORT_SYMBOL_GPL(power_supply_put_battery_info);
  * percent
  * @table: Pointer to battery resistance temperature table
  * @table_len: The table length
- * @ocv: Current temperature
+ * @temp: Current temperature
  *
  * This helper function is used to look up battery internal resistance percent
  * according to current temperature value from the resistance temperature table,

drivers/power/supply/power_supply_sysfs.c

@@ -87,6 +87,7 @@ static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = {
 	[POWER_SUPPLY_CHARGE_TYPE_STANDARD]	= "Standard",
 	[POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE]	= "Adaptive",
 	[POWER_SUPPLY_CHARGE_TYPE_CUSTOM]	= "Custom",
+	[POWER_SUPPLY_CHARGE_TYPE_LONGLIFE]	= "Long Life",
 };
 
 static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
@@ -101,6 +102,9 @@ static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
 	[POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE]   = "Safety timer expire",
 	[POWER_SUPPLY_HEALTH_OVERCURRENT]	    = "Over current",
 	[POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED]  = "Calibration required",
+	[POWER_SUPPLY_HEALTH_WARM]		    = "Warm",
+	[POWER_SUPPLY_HEALTH_COOL]		    = "Cool",
+	[POWER_SUPPLY_HEALTH_HOT]		    = "Hot",
 };
 
 static const char * const POWER_SUPPLY_TECHNOLOGY_TEXT[] = {
@@ -343,7 +347,7 @@ static umode_t power_supply_attr_is_visible(struct kobject *kobj,
 					   struct attribute *attr,
 					   int attrno)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct power_supply *psy = dev_get_drvdata(dev);
 	umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
 	int i;

drivers/power/supply/rt5033_battery.c

@@ -125,7 +125,7 @@ static int rt5033_battery_probe(struct i2c_client *client,
 
 	battery = devm_kzalloc(&client->dev, sizeof(*battery), GFP_KERNEL);
 	if (!battery)
-		return -EINVAL;
+		return -ENOMEM;
 
 	battery->client = client;
 	battery->regmap = devm_regmap_init_i2c(client,

drivers/power/supply/sbs-battery.c

@@ -51,6 +51,14 @@ enum {
 	REG_CHARGE_VOLTAGE,
 };
 
+#define REG_ADDR_SPEC_INFO		0x1A
+#define SPEC_INFO_VERSION_MASK		GENMASK(7, 4)
+#define SPEC_INFO_VERSION_SHIFT		4
+
+#define SBS_VERSION_1_0			1
+#define SBS_VERSION_1_1			2
+#define SBS_VERSION_1_1_WITH_PEC	3
+
 #define REG_ADDR_MANUFACTURE_DATE	0x1B
 
 /* Battery Mode defines */
@@ -224,14 +232,57 @@ static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
 
 static int sbs_update_presence(struct sbs_info *chip, bool is_present)
 {
+	struct i2c_client *client = chip->client;
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+	u8 version;
+
 	if (chip->is_present == is_present)
 		return 0;
 
 	if (!is_present) {
 		chip->is_present = false;
+		/* Disable PEC when no device is present */
+		client->flags &= ~I2C_CLIENT_PEC;
 		return 0;
 	}
 
+	/* Check if device supports packet error checking and use it */
+	while (retries > 0) {
+		ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
+		if (ret >= 0)
+			break;
+
+		/*
+		 * Some batteries trigger the detection pin before the
+		 * I2C bus is properly connected. This works around the
+		 * issue.
+		 */
+		msleep(100);
+
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
+
+		/* fallback to old behaviour */
+		client->flags &= ~I2C_CLIENT_PEC;
+		chip->is_present = true;
+
+		return ret;
+	}
+
+	version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
+
+	if (version == SBS_VERSION_1_1_WITH_PEC)
+		client->flags |= I2C_CLIENT_PEC;
+	else
+		client->flags &= ~I2C_CLIENT_PEC;
+
+	dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
+		"enabled" : "disabled");
+
 	if (!chip->is_present && is_present && !chip->charger_broadcasts)
 		sbs_disable_charger_broadcasts(chip);
 
@@ -263,8 +314,7 @@ static int sbs_read_word_data(struct i2c_client *client, u8 address)
 	return ret;
 }
 
-static int sbs_read_string_data(struct i2c_client *client, u8 address,
-				char *values)
+static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
 {
 	struct sbs_info *chip = i2c_get_clientdata(client);
 	s32 ret = 0, block_length = 0;
@@ -274,6 +324,9 @@ static int sbs_read_string_data(struct i2c_client *client, u8 address,
 	retries_length = chip->i2c_retry_count;
 	retries_block = chip->i2c_retry_count;
 
+	dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
+				    "Fallback method does not support PEC.\n");
+
 	/* Adapter needs to support these two functions */
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_BYTE_DATA |
@@ -329,6 +382,38 @@ static int sbs_read_string_data(struct i2c_client *client, u8 address,
 	return ret;
 }
 
+static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	int ret = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
+		bool pec = client->flags & I2C_CLIENT_PEC;
+		client->flags &= ~I2C_CLIENT_PEC;
+		ret = sbs_read_string_data_fallback(client, address, values);
+		if (pec)
+			client->flags |= I2C_CLIENT_PEC;
+		return ret;
+	}
+
+	while (retries > 0) {
+		ret = i2c_smbus_read_block_data(client, address, values);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
+		return ret;
+	}
+
+	/* add string termination */
+	values[ret] = '\0';
+	return ret;
+}
+
 static int sbs_write_word_data(struct i2c_client *client, u8 address,
 	u16 value)
 {

drivers/power/supply/sc27xx_fuel_gauge.c

@@ -5,6 +5,7 @@
 #include <linux/iio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
@@ -133,14 +134,14 @@ static const char * const sc27xx_charger_supply_name[] = {
 	"sc2723_charger",
 };
 
-static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, int adc)
+static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, s64 adc)
 {
-	return DIV_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc);
+	return DIV_S64_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc);
 }
 
-static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, int adc)
+static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, s64 adc)
 {
-	return DIV_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc);
+	return DIV_S64_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc);
 }
 
 static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol)

drivers/power/supply/test_power.c

@@ -34,7 +34,7 @@ static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
 static int battery_capacity		= 50;
 static int battery_voltage		= 3300;
 static int battery_charge_counter	= -1000;
-static int battery_current		= 1600;
+static int battery_current		= -1600;
 
 static bool module_initialized;
 

drivers/power/supply/wilco-charger.c

@@ -27,6 +27,7 @@ enum charge_mode {
 	CHARGE_MODE_AC = 3,	/* Mostly AC use, used for Trickle */
 	CHARGE_MODE_AUTO = 4,	/* Used for Adaptive */
 	CHARGE_MODE_CUSTOM = 5,	/* Used for Custom */
+	CHARGE_MODE_LONGLIFE = 6, /* Used for Long Life */
 };
 
 #define CHARGE_LOWER_LIMIT_MIN	50
@@ -48,6 +49,8 @@ static int psp_val_to_charge_mode(int psp_val)
 		return CHARGE_MODE_AUTO;
 	case POWER_SUPPLY_CHARGE_TYPE_CUSTOM:
 		return CHARGE_MODE_CUSTOM;
+	case POWER_SUPPLY_CHARGE_TYPE_LONGLIFE:
+		return CHARGE_MODE_LONGLIFE;
 	default:
 		return -EINVAL;
 	}
@@ -67,6 +70,8 @@ static int charge_mode_to_psp_val(enum charge_mode mode)
 		return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE;
 	case CHARGE_MODE_CUSTOM:
 		return POWER_SUPPLY_CHARGE_TYPE_CUSTOM;
+	case CHARGE_MODE_LONGLIFE:
+		return POWER_SUPPLY_CHARGE_TYPE_LONGLIFE;
 	default:
 		return -EINVAL;
 	}

include/linux/math64.h

@@ -281,4 +281,23 @@ u64 mul_u64_u64_div_u64(u64 a, u64 mul, u64 div);
 #define DIV64_U64_ROUND_CLOSEST(dividend, divisor)	\
 	({ u64 _tmp = (divisor); div64_u64((dividend) + _tmp / 2, _tmp); })
 
+/*
+ * DIV_S64_ROUND_CLOSEST - signed 64bit divide with 32bit divisor rounded to nearest integer
+ * @dividend: signed 64bit dividend
+ * @divisor: signed 32bit divisor
+ *
+ * Divide signed 64bit dividend by signed 32bit divisor
+ * and round to closest integer.
+ *
+ * Return: dividend / divisor rounded to nearest integer
+ */
+#define DIV_S64_ROUND_CLOSEST(dividend, divisor)(	\
+{							\
+	s64 __x = (dividend);				\
+	s32 __d = (divisor);				\
+	((__x > 0) == (__d > 0)) ?			\
+		div_s64((__x + (__d / 2)), __d) :	\
+		div_s64((__x - (__d / 2)), __d);	\
+}							\
+)
 #endif /* _LINUX_MATH64_H */

include/linux/power/bq2415x_charger.h

@@ -14,8 +14,8 @@
  * value is -1 then default chip value (specified in datasheet) will be
  * used.
  *
- * Value resistor_sense is needed for for configuring charge and
- * termination current. It it is less or equal to zero, configuring charge
+ * Value resistor_sense is needed for configuring charge and
+ * termination current. If it is less or equal to zero, configuring charge
  * and termination current will not be possible.
  *
  * For automode support is needed to provide name of power supply device

include/linux/power/bq27xxx_battery.h

@@ -30,6 +30,8 @@ enum bq27xxx_chip {
 	BQ27426,
 	BQ27441,
 	BQ27621,
+	BQ27Z561,
+	BQ28Z610,
 };
 
 struct bq27xxx_device_info;

include/linux/power_supply.h

@@ -48,6 +48,7 @@ enum {
 	POWER_SUPPLY_CHARGE_TYPE_STANDARD,	/* normal speed */
 	POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE,	/* dynamically adjusted speed */
 	POWER_SUPPLY_CHARGE_TYPE_CUSTOM,	/* use CHARGE_CONTROL_* props */
+	POWER_SUPPLY_CHARGE_TYPE_LONGLIFE,	/* slow speed, longer life */
 };
 
 enum {
@@ -62,6 +63,9 @@ enum {
 	POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE,
 	POWER_SUPPLY_HEALTH_OVERCURRENT,
 	POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED,
+	POWER_SUPPLY_HEALTH_WARM,
+	POWER_SUPPLY_HEALTH_COOL,
+	POWER_SUPPLY_HEALTH_HOT,
 };
 
 enum {