ARM: OMAP: overo: use new display drivers

Use the new display drivers for OMAP3 Overo board.

The new OMAP display drivers were merged for 3.11, and we can now change
the board files to use the new ones and phase out the old ones.

Note that the LCD add-on boards for lcd43 and lcd35 use the same GPIOs
for the panels. This means that both panel devices cannot be probed at
the same time.

DT will handle this correctly, i.e. the DT data will contain the panel
device only for the add-on board that is attached. However, for the
board file we need a hackish solution: We parse the kernel boot command
line, and see whether lcd43 or lcd35 is set as a default display, and
add the given one. Or, if neither is given, default to lcd43.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-overo.c

@@ -72,6 +72,9 @@
 #define OVERO_SMSC911X2_CS     4
 #define OVERO_SMSC911X2_GPIO   65
 
+/* whether to register LCD35 instead of LCD43 */
+static bool overo_use_lcd35;
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
 #define OVERO_GPIO_LCD_EN 144
 #define OVERO_GPIO_LCD_BL 145
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= -1,
+static struct connector_atv_platform_data overo_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device overo_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tv_pdata,
 };
 
-static struct omap_dss_device overo_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-};
+static const struct display_timing overo_lcd43_videomode = {
+	.pixelclock	= { 0, 9200000, 0 },
 
-static struct panel_generic_dpi_data lcd43_panel = {
-	.name			= "samsung_lte430wq_f0c",
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 8, 0 },
+	.hback_porch = { 0, 4, 0 },
+	.hsync_len = { 0, 41, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 10, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device overo_lcd43_device = {
+static struct panel_dpi_platform_data overo_lcd43_pdata = {
 	.name                   = "lcd43",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd43_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct panel_generic_dpi_data lcd35_panel = {
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &overo_lcd43_videomode,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
 };
 
-static struct omap_dss_device overo_lcd35_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd35",
-	.driver_name		= "lgphilips_lb035q02_panel",
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd35_panel,
+static struct platform_device overo_lcd43_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_lcd43_pdata,
 };
-#endif
 
-static struct omap_dss_device *overo_dss_devices[] = {
-	&overo_dvi_device,
-	&overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	&overo_lcd35_device,
-#endif
-	&overo_lcd43_device,
+static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
+};
+
+static struct platform_device overo_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_dvi_connector_pdata,
+};
+
+static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device overo_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tfp410_pdata,
 };
 
 static struct omap_dss_board_info overo_dss_data = {
-	.num_devices	= ARRAY_SIZE(overo_dss_devices),
-	.devices	= overo_dss_devices,
-	.default_device	= &overo_dvi_device,
+	.default_display_name = "lcd43",
 };
 
+static void __init overo_display_init(void)
+{
+	omap_display_init(&overo_dss_data);
+
+	if (!overo_use_lcd35)
+		platform_device_register(&overo_lcd43_device);
+	platform_device_register(&overo_tfp410_device);
+	platform_device_register(&overo_dvi_connector_device);
+	platform_device_register(&overo_tv_connector_device);
+}
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
+static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
+	.name                   = "lcd35",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
+};
+
+/*
+ * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
+ * selection is done based on the overo_use_lcd35 field. If new SPI
+ * devices are added here, extra work is needed to make only the lgphilips panel
+ * affected by the overo_use_lcd35 field.
+ */
 static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
 	{
-		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.modalias		= "panel_lgphilips_lb035q02",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 500000,
 		.mode			= SPI_MODE_3,
+		.platform_data		= &overo_lcd35_pdata,
 	},
-#endif
 };
 
 static int __init overo_spi_init(void)
 {
 	overo_ads7846_init();
+
+	if (overo_use_lcd35) {
 		spi_register_board_info(overo_spi_board_info,
 				ARRAY_SIZE(overo_spi_board_info));
+	}
 	return 0;
 }
 
@@ -463,11 +499,13 @@ static void __init overo_init(void)
 {
 	int ret;
 
+	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
+		overo_use_lcd35 = true;
+
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	omap_hsmmc_init(mmc);
-	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
@@ -484,6 +522,8 @@ static void __init overo_init(void)
 	overo_init_keys();
 	omap_twl4030_audio_init("overo", NULL);
 
+	overo_display_init();
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);