Commit 45f16c82 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Sam Ravnborg

drm/omap: displays: Remove unused panel drivers

drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-3-laurent.pinchart@ideasonboard.com
parent 1e938755
...@@ -29,42 +29,4 @@ config DRM_OMAP_PANEL_DSI_CM ...@@ -29,42 +29,4 @@ config DRM_OMAP_PANEL_DSI_CM
help help
Driver for generic DSI command mode panels. Driver for generic DSI command mode panels.
config DRM_OMAP_PANEL_SONY_ACX565AKM
tristate "ACX565AKM Panel"
depends on SPI && BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N900
config DRM_OMAP_PANEL_LGPHILIPS_LB035Q02
tristate "LG.Philips LB035Q02 LCD Panel"
depends on SPI
help
LCD Panel used on the Gumstix Overo Palo35
config DRM_OMAP_PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
config DRM_OMAP_PANEL_TPO_TD028TTEC1
tristate "TPO TD028TTEC1 LCD Panel"
depends on SPI
help
LCD panel used in Openmoko.
config DRM_OMAP_PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel"
depends on SPI
help
LCD Panel used in OMAP3 Pandora
config DRM_OMAP_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 Panel"
depends on SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This NEC NL8048HL11 panel is TFT LCD used in the
Zoom2/3/3630 sdp boards.
endmenu endmenu
...@@ -4,9 +4,3 @@ obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o ...@@ -4,9 +4,3 @@ obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
// SPDX-License-Identifier: GPL-2.0-only
/*
* LG.Philips LB035Q02 LCD Panel driver
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Based on a driver by: Steve Sakoman <steve@sakoman.com>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include "../dss/omapdss.h"
static const struct videomode lb035q02_vm = {
.hactive = 320,
.vactive = 240,
.pixelclock = 6500000,
.hsync_len = 2,
.hfront_porch = 20,
.hback_porch = 68,
.vsync_len = 2,
.vfront_porch = 4,
.vback_porch = 18,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
struct panel_drv_data {
struct omap_dss_device dssdev;
struct spi_device *spi;
struct videomode vm;
struct gpio_desc *enable_gpio;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
{
struct spi_message msg;
struct spi_transfer index_xfer = {
.len = 3,
.cs_change = 1,
};
struct spi_transfer value_xfer = {
.len = 3,
};
u8 buffer[16];
spi_message_init(&msg);
/* register index */
buffer[0] = 0x70;
buffer[1] = 0x00;
buffer[2] = reg & 0x7f;
index_xfer.tx_buf = buffer;
spi_message_add_tail(&index_xfer, &msg);
/* register value */
buffer[4] = 0x72;
buffer[5] = val >> 8;
buffer[6] = val;
value_xfer.tx_buf = buffer + 4;
spi_message_add_tail(&value_xfer, &msg);
return spi_sync(spi, &msg);
}
static void init_lb035q02_panel(struct spi_device *spi)
{
/* Init sequence from page 28 of the lb035q02 spec */
lb035q02_write_reg(spi, 0x01, 0x6300);
lb035q02_write_reg(spi, 0x02, 0x0200);
lb035q02_write_reg(spi, 0x03, 0x0177);
lb035q02_write_reg(spi, 0x04, 0x04c7);
lb035q02_write_reg(spi, 0x05, 0xffc0);
lb035q02_write_reg(spi, 0x06, 0xe806);
lb035q02_write_reg(spi, 0x0a, 0x4008);
lb035q02_write_reg(spi, 0x0b, 0x0000);
lb035q02_write_reg(spi, 0x0d, 0x0030);
lb035q02_write_reg(spi, 0x0e, 0x2800);
lb035q02_write_reg(spi, 0x0f, 0x0000);
lb035q02_write_reg(spi, 0x16, 0x9f80);
lb035q02_write_reg(spi, 0x17, 0x0a0f);
lb035q02_write_reg(spi, 0x1e, 0x00c1);
lb035q02_write_reg(spi, 0x30, 0x0300);
lb035q02_write_reg(spi, 0x31, 0x0007);
lb035q02_write_reg(spi, 0x32, 0x0000);
lb035q02_write_reg(spi, 0x33, 0x0000);
lb035q02_write_reg(spi, 0x34, 0x0707);
lb035q02_write_reg(spi, 0x35, 0x0004);
lb035q02_write_reg(spi, 0x36, 0x0302);
lb035q02_write_reg(spi, 0x37, 0x0202);
lb035q02_write_reg(spi, 0x3a, 0x0a0d);
lb035q02_write_reg(spi, 0x3b, 0x0806);
}
static int lb035q02_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dst);
init_lb035q02_panel(ddata->spi);
return 0;
}
static void lb035q02_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void lb035q02_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
}
static void lb035q02_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
}
static int lb035q02_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops lb035q02_ops = {
.connect = lb035q02_connect,
.disconnect = lb035q02_disconnect,
.enable = lb035q02_enable,
.disable = lb035q02_disable,
.get_modes = lb035q02_get_modes,
};
static int lb035q02_probe_of(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct gpio_desc *gpio;
gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to parse enable gpio\n");
return PTR_ERR(gpio);
}
ddata->enable_gpio = gpio;
return 0;
}
static int lb035q02_panel_spi_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
r = lb035q02_probe_of(spi);
if (r)
return r;
ddata->vm = lb035q02_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &lb035q02_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
* DE is active LOW
* DATA needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int lb035q02_panel_spi_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
omapdss_device_unregister(dssdev);
lb035q02_disable(dssdev);
return 0;
}
static const struct of_device_id lb035q02_of_match[] = {
{ .compatible = "omapdss,lgphilips,lb035q02", },
{},
};
MODULE_DEVICE_TABLE(of, lb035q02_of_match);
static struct spi_driver lb035q02_spi_driver = {
.probe = lb035q02_panel_spi_probe,
.remove = lb035q02_panel_spi_remove,
.driver = {
.name = "panel_lgphilips_lb035q02",
.of_match_table = lb035q02_of_match,
.suppress_bind_attrs = true,
},
};
module_spi_driver(lb035q02_spi_driver);
MODULE_ALIAS("spi:lgphilips,lb035q02");
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* NEC NL8048HL11 Panel driver
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Author: Erik Gilling <konkers@android.com>
* Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct videomode vm;
struct gpio_desc *res_gpio;
struct spi_device *spi;
};
#define LCD_XRES 800
#define LCD_YRES 480
/*
* NEC PIX Clock Ratings
* MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
*/
#define LCD_PIXEL_CLOCK 23800000
static const struct {
unsigned char addr;
unsigned char dat;
} nec_8048_init_seq[] = {
{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
};
static const struct videomode nec_8048_panel_vm = {
.hactive = LCD_XRES,
.vactive = LCD_YRES,
.pixelclock = LCD_PIXEL_CLOCK,
.hfront_porch = 6,
.hsync_len = 1,
.hback_porch = 4,
.vfront_porch = 3,
.vsync_len = 1,
.vback_porch = 4,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
unsigned char reg_data)
{
int ret = 0;
unsigned int cmd = 0, data = 0;
cmd = 0x0000 | reg_addr; /* register address write */
data = 0x0100 | reg_data; /* register data write */
data = (cmd << 16) | data;
ret = spi_write(spi, (unsigned char *)&data, 4);
if (ret)
pr_err("error in spi_write %x\n", data);
return ret;
}
static int init_nec_8048_wvga_lcd(struct spi_device *spi)
{
unsigned int i;
/* Initialization Sequence */
/* nec_8048_spi_send(spi, REG, VAL) */
for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
udelay(20);
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
return 0;
}
static int nec_8048_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void nec_8048_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void nec_8048_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
gpiod_set_value_cansleep(ddata->res_gpio, 1);
}
static void nec_8048_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
gpiod_set_value_cansleep(ddata->res_gpio, 0);
}
static int nec_8048_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops nec_8048_ops = {
.connect = nec_8048_connect,
.disconnect = nec_8048_disconnect,
.enable = nec_8048_enable,
.disable = nec_8048_disable,
.get_modes = nec_8048_get_modes,
};
static int nec_8048_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct gpio_desc *gpio;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->mode = SPI_MODE_0;
spi->bits_per_word = 32;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
init_nec_8048_wvga_lcd(spi);
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to get reset gpio\n");
return PTR_ERR(gpio);
}
ddata->res_gpio = gpio;
ddata->vm = nec_8048_panel_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &nec_8048_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int nec_8048_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
omapdss_device_unregister(dssdev);
nec_8048_disable(dssdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int nec_8048_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
nec_8048_spi_send(spi, 2, 0x01);
mdelay(40);
return 0;
}
static int nec_8048_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
/* reinitialize the panel */
spi_setup(spi);
nec_8048_spi_send(spi, 2, 0x00);
init_nec_8048_wvga_lcd(spi);
return 0;
}
static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
nec_8048_resume);
#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
#else
#define NEC_8048_PM_OPS NULL
#endif
static const struct of_device_id nec_8048_of_match[] = {
{ .compatible = "omapdss,nec,nl8048hl11", },
{},
};
MODULE_DEVICE_TABLE(of, nec_8048_of_match);
static struct spi_driver nec_8048_driver = {
.driver = {
.name = "panel-nec-nl8048hl11",
.pm = NEC_8048_PM_OPS,
.of_match_table = nec_8048_of_match,
.suppress_bind_attrs = true,
},
.probe = nec_8048_probe,
.remove = nec_8048_remove,
};
module_spi_driver(nec_8048_driver);
MODULE_ALIAS("spi:nec,nl8048hl11");
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0-only
/*
* LCD panel driver for Sharp LS037V7DW01
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct regulator *vcc;
struct videomode vm;
struct gpio_desc *resb_gpio; /* low = reset active min 20 us */
struct gpio_desc *ini_gpio; /* high = power on */
struct gpio_desc *mo_gpio; /* low = 480x640, high = 240x320 */
struct gpio_desc *lr_gpio; /* high = conventional horizontal scanning */
struct gpio_desc *ud_gpio; /* high = conventional vertical scanning */
};
static const struct videomode sharp_ls_vm = {
.hactive = 480,
.vactive = 640,
.pixelclock = 19200000,
.hsync_len = 2,
.hfront_porch = 1,
.hback_porch = 28,
.vsync_len = 1,
.vfront_porch = 1,
.vback_porch = 1,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int sharp_ls_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void sharp_ls_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void sharp_ls_pre_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
int r;
if (ddata->vcc) {
r = regulator_enable(ddata->vcc);
if (r)
dev_err(dssdev->dev, "%s: failed to enable regulator\n",
__func__);
}
}
static void sharp_ls_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
if (ddata->resb_gpio)
gpiod_set_value_cansleep(ddata->resb_gpio, 1);
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 1);
}
static void sharp_ls_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 0);
if (ddata->resb_gpio)
gpiod_set_value_cansleep(ddata->resb_gpio, 0);
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
}
static void sharp_ls_post_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
if (ddata->vcc)
regulator_disable(ddata->vcc);
}
static int sharp_ls_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops sharp_ls_ops = {
.connect = sharp_ls_connect,
.disconnect = sharp_ls_disconnect,
.pre_enable = sharp_ls_pre_enable,
.enable = sharp_ls_enable,
.disable = sharp_ls_disable,
.post_disable = sharp_ls_post_disable,
.get_modes = sharp_ls_get_modes,
};
static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
const char *desc, struct gpio_desc **gpiod)
{
struct gpio_desc *gd;
*gpiod = NULL;
gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
if (IS_ERR(gd))
return PTR_ERR(gd);
*gpiod = gd;
return 0;
}
static int sharp_ls_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
int r;
ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
if (IS_ERR(ddata->vcc)) {
dev_err(&pdev->dev, "failed to get regulator\n");
return PTR_ERR(ddata->vcc);
}
/* lcd INI */
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
if (r)
return r;
/* lcd RESB */
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
if (r)
return r;
/* lcd MO */
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
if (r)
return r;
/* lcd LR */
r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
if (r)
return r;
/* lcd UD */
r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
if (r)
return r;
return 0;
}
static int sharp_ls_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
r = sharp_ls_probe_of(pdev);
if (r)
return r;
ddata->vm = sharp_ls_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &pdev->dev;
dssdev->ops = &sharp_ls_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
* DATA needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int __exit sharp_ls_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
omapdss_device_unregister(dssdev);
if (omapdss_device_is_enabled(dssdev)) {
sharp_ls_disable(dssdev);
sharp_ls_post_disable(dssdev);
}
return 0;
}
static const struct of_device_id sharp_ls_of_match[] = {
{ .compatible = "omapdss,sharp,ls037v7dw01", },
{},
};
MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
static struct platform_driver sharp_ls_driver = {
.probe = sharp_ls_probe,
.remove = __exit_p(sharp_ls_remove),
.driver = {
.name = "panel-sharp-ls037v7dw01",
.of_match_table = sharp_ls_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(sharp_ls_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0-only
/*
* Sony ACX565AKM LCD Panel driver
*
* Copyright (C) 2010 Nokia Corporation
*
* Original Driver Author: Imre Deak <imre.deak@nokia.com>
* Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@ti.com>
* Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
#define MIPID_CMD_READ_DISP_ID 0x04
#define MIPID_CMD_READ_RED 0x06
#define MIPID_CMD_READ_GREEN 0x07
#define MIPID_CMD_READ_BLUE 0x08
#define MIPID_CMD_READ_DISP_STATUS 0x09
#define MIPID_CMD_RDDSDR 0x0F
#define MIPID_CMD_SLEEP_IN 0x10
#define MIPID_CMD_SLEEP_OUT 0x11
#define MIPID_CMD_DISP_OFF 0x28
#define MIPID_CMD_DISP_ON 0x29
#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51
#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
#define MIPID_CMD_WRITE_CTRL_DISP 0x53
#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
#define MIPID_CMD_READ_CTRL_DISP 0x54
#define MIPID_CMD_WRITE_CABC 0x55
#define MIPID_CMD_READ_CABC 0x56
#define MIPID_VER_LPH8923 3
#define MIPID_VER_LS041Y3 4
#define MIPID_VER_L4F00311 8
#define MIPID_VER_ACX565AKM 9
struct panel_drv_data {
struct omap_dss_device dssdev;
struct gpio_desc *reset_gpio;
struct videomode vm;
char *name;
int enabled;
int model;
int revision;
u8 display_id[3];
unsigned has_bc:1;
unsigned has_cabc:1;
unsigned cabc_mode;
unsigned long hw_guard_end; /* next value of jiffies
when we can issue the
next sleep in/out command */
unsigned long hw_guard_wait; /* max guard time in jiffies */
struct spi_device *spi;
struct mutex mutex;
struct backlight_device *bl_dev;
};
static const struct videomode acx565akm_panel_vm = {
.hactive = 800,
.vactive = 480,
.pixelclock = 24000000,
.hfront_porch = 28,
.hsync_len = 4,
.hback_porch = 24,
.vfront_porch = 3,
.vsync_len = 3,
.vback_porch = 4,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd,
const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
struct spi_message m;
struct spi_transfer *x, xfer[5];
int r;
BUG_ON(ddata->spi == NULL);
spi_message_init(&m);
memset(xfer, 0, sizeof(xfer));
x = &xfer[0];
cmd &= 0xff;
x->tx_buf = &cmd;
x->bits_per_word = 9;
x->len = 2;
if (rlen > 1 && wlen == 0) {
/*
* Between the command and the response data there is a
* dummy clock cycle. Add an extra bit after the command
* word to account for this.
*/
x->bits_per_word = 10;
cmd <<= 1;
}
spi_message_add_tail(x, &m);
if (wlen) {
x++;
x->tx_buf = wbuf;
x->len = wlen;
x->bits_per_word = 9;
spi_message_add_tail(x, &m);
}
if (rlen) {
x++;
x->rx_buf = rbuf;
x->len = rlen;
spi_message_add_tail(x, &m);
}
r = spi_sync(ddata->spi, &m);
if (r < 0)
dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r);
}
static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd)
{
acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0);
}
static inline void acx565akm_write(struct panel_drv_data *ddata,
int reg, const u8 *buf, int len)
{
acx565akm_transfer(ddata, reg, buf, len, NULL, 0);
}
static inline void acx565akm_read(struct panel_drv_data *ddata,
int reg, u8 *buf, int len)
{
acx565akm_transfer(ddata, reg, NULL, 0, buf, len);
}
static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
{
ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
}
static void hw_guard_wait(struct panel_drv_data *ddata)
{
unsigned long wait = ddata->hw_guard_end - jiffies;
if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(wait);
}
}
static void set_sleep_mode(struct panel_drv_data *ddata, int on)
{
int cmd;
if (on)
cmd = MIPID_CMD_SLEEP_IN;
else
cmd = MIPID_CMD_SLEEP_OUT;
/*
* We have to keep 120msec between sleep in/out commands.
* (8.2.15, 8.2.16).
*/
hw_guard_wait(ddata);
acx565akm_cmd(ddata, cmd);
hw_guard_start(ddata, 120);
}
static void set_display_state(struct panel_drv_data *ddata, int enabled)
{
int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
acx565akm_cmd(ddata, cmd);
}
static int panel_enabled(struct panel_drv_data *ddata)
{
__be32 v;
u32 disp_status;
int enabled;
acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS, (u8 *)&v, 4);
disp_status = __be32_to_cpu(v);
enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
dev_dbg(&ddata->spi->dev,
"LCD panel %senabled by bootloader (status 0x%04x)\n",
enabled ? "" : "not ", disp_status);
return enabled;
}
static int panel_detect(struct panel_drv_data *ddata)
{
acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3);
dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n",
ddata->display_id[0],
ddata->display_id[1],
ddata->display_id[2]);
switch (ddata->display_id[0]) {
case 0x10:
ddata->model = MIPID_VER_ACX565AKM;
ddata->name = "acx565akm";
ddata->has_bc = 1;
ddata->has_cabc = 1;
break;
case 0x29:
ddata->model = MIPID_VER_L4F00311;
ddata->name = "l4f00311";
break;
case 0x45:
ddata->model = MIPID_VER_LPH8923;
ddata->name = "lph8923";
break;
case 0x83:
ddata->model = MIPID_VER_LS041Y3;
ddata->name = "ls041y3";
break;
default:
ddata->name = "unknown";
dev_err(&ddata->spi->dev, "invalid display ID\n");
return -ENODEV;
}
ddata->revision = ddata->display_id[1];
dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n",
ddata->name, ddata->revision);
return 0;
}
/*----------------------Backlight Control-------------------------*/
static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable)
{
u16 ctrl;
acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
if (enable) {
ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON;
} else {
ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON);
}
ctrl |= 1 << 8;
acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
}
static void set_cabc_mode(struct panel_drv_data *ddata, unsigned int mode)
{
u16 cabc_ctrl;
ddata->cabc_mode = mode;
if (!ddata->enabled)
return;
cabc_ctrl = 0;
acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
cabc_ctrl &= ~3;
cabc_ctrl |= (1 << 8) | (mode & 3);
acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
}
static unsigned int get_cabc_mode(struct panel_drv_data *ddata)
{
return ddata->cabc_mode;
}
static unsigned int get_hw_cabc_mode(struct panel_drv_data *ddata)
{
u8 cabc_ctrl;
acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
return cabc_ctrl & 3;
}
static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level)
{
int bv;
bv = level | (1 << 8);
acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
if (level)
enable_backlight_ctrl(ddata, 1);
else
enable_backlight_ctrl(ddata, 0);
}
static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata)
{
u8 bv;
acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
return bv;
}
static int acx565akm_bl_update_status(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
int level;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK)
level = dev->props.brightness;
else
level = 0;
if (ddata->has_bc)
acx565akm_set_brightness(ddata, level);
else
return -ENODEV;
return 0;
}
static int acx565akm_bl_get_intensity(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
dev_dbg(&dev->dev, "%s\n", __func__);
if (!ddata->has_bc)
return -ENODEV;
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK) {
if (ddata->has_bc)
return acx565akm_get_actual_brightness(ddata);
else
return dev->props.brightness;
}
return 0;
}
static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
int r;
mutex_lock(&ddata->mutex);
r = acx565akm_bl_update_status(dev);
mutex_unlock(&ddata->mutex);
return r;
}
static int acx565akm_bl_get_intensity_locked(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
int r;
mutex_lock(&ddata->mutex);
r = acx565akm_bl_get_intensity(dev);
mutex_unlock(&ddata->mutex);
return r;
}
static const struct backlight_ops acx565akm_bl_ops = {
.get_brightness = acx565akm_bl_get_intensity_locked,
.update_status = acx565akm_bl_update_status_locked,
};
/*--------------------Auto Brightness control via Sysfs---------------------*/
static const char * const cabc_modes[] = {
"off", /* always used when CABC is not supported */
"ui",
"still-image",
"moving-image",
};
static ssize_t show_cabc_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
const char *mode_str;
int mode;
int len;
if (!ddata->has_cabc)
mode = 0;
else
mode = get_cabc_mode(ddata);
mode_str = "unknown";
if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
mode_str = cabc_modes[mode];
len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
}
static ssize_t store_cabc_mode(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int i;
for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
const char *mode_str = cabc_modes[i];
int cmp_len = strlen(mode_str);
if (count > 0 && buf[count - 1] == '\n')
count--;
if (count != cmp_len)
continue;
if (strncmp(buf, mode_str, cmp_len) == 0)
break;
}
if (i == ARRAY_SIZE(cabc_modes))
return -EINVAL;
if (!ddata->has_cabc && i != 0)
return -EINVAL;
mutex_lock(&ddata->mutex);
set_cabc_mode(ddata, i);
mutex_unlock(&ddata->mutex);
return count;
}
static ssize_t show_cabc_available_modes(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int len;
int i;
if (!ddata->has_cabc)
return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
for (i = 0, len = 0;
len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
i ? " " : "", cabc_modes[i],
i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
}
static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
show_cabc_mode, store_cabc_mode);
static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
show_cabc_available_modes, NULL);
static struct attribute *bldev_attrs[] = {
&dev_attr_cabc_mode.attr,
&dev_attr_cabc_available_modes.attr,
NULL,
};
static const struct attribute_group bldev_attr_group = {
.attrs = bldev_attrs,
};
static int acx565akm_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void acx565akm_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
/*FIXME tweak me */
msleep(50);
if (ddata->reset_gpio)
gpiod_set_value(ddata->reset_gpio, 1);
if (ddata->enabled) {
dev_dbg(&ddata->spi->dev, "panel already enabled\n");
return 0;
}
/*
* We have to meet all the following delay requirements:
* 1. tRW: reset pulse width 10usec (7.12.1)
* 2. tRT: reset cancel time 5msec (7.12.1)
* 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
* case (7.6.2)
* 4. 120msec before the sleep out command (7.12.1)
*/
msleep(120);
set_sleep_mode(ddata, 0);
ddata->enabled = 1;
/* 5msec between sleep out and the next command. (8.2.16) */
usleep_range(5000, 10000);
set_display_state(ddata, 1);
set_cabc_mode(ddata, ddata->cabc_mode);
return acx565akm_bl_update_status(ddata->bl_dev);
}
static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
dev_dbg(dssdev->dev, "%s\n", __func__);
if (!ddata->enabled)
return;
set_display_state(ddata, 0);
set_sleep_mode(ddata, 1);
ddata->enabled = 0;
/*
* We have to provide PCLK,HS,VS signals for 2 frames (worst case
* ~50msec) after sending the sleep in command and asserting the
* reset signal. We probably could assert the reset w/o the delay
* but we still delay to avoid possible artifacts. (7.6.1)
*/
msleep(50);
if (ddata->reset_gpio)
gpiod_set_value(ddata->reset_gpio, 0);
/* FIXME need to tweak this delay */
msleep(100);
}
static void acx565akm_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
mutex_lock(&ddata->mutex);
acx565akm_panel_power_on(dssdev);
mutex_unlock(&ddata->mutex);
}
static void acx565akm_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
mutex_lock(&ddata->mutex);
acx565akm_panel_power_off(dssdev);
mutex_unlock(&ddata->mutex);
}
static int acx565akm_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops acx565akm_ops = {
.connect = acx565akm_connect,
.disconnect = acx565akm_disconnect,
.enable = acx565akm_enable,
.disable = acx565akm_disable,
.get_modes = acx565akm_get_modes,
};
static int acx565akm_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct backlight_device *bldev;
int max_brightness, brightness;
struct backlight_properties props;
struct gpio_desc *gpio;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->mode = SPI_MODE_3;
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
mutex_init(&ddata->mutex);
gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to parse reset gpio\n");
return PTR_ERR(gpio);
}
ddata->reset_gpio = gpio;
if (ddata->reset_gpio)
gpiod_set_value(ddata->reset_gpio, 1);
/*
* After reset we have to wait 5 msec before the first
* command can be sent.
*/
usleep_range(5000, 10000);
ddata->enabled = panel_enabled(ddata);
r = panel_detect(ddata);
if (!ddata->enabled && ddata->reset_gpio)
gpiod_set_value(ddata->reset_gpio, 0);
if (r) {
dev_err(&spi->dev, "%s panel detect error\n", __func__);
return r;
}
memset(&props, 0, sizeof(props));
props.fb_blank = FB_BLANK_UNBLANK;
props.power = FB_BLANK_UNBLANK;
props.type = BACKLIGHT_RAW;
bldev = backlight_device_register("acx565akm", &ddata->spi->dev,
ddata, &acx565akm_bl_ops, &props);
if (IS_ERR(bldev))
return PTR_ERR(bldev);
ddata->bl_dev = bldev;
if (ddata->has_cabc) {
r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
if (r) {
dev_err(&bldev->dev,
"%s failed to create sysfs files\n", __func__);
goto err_backlight_unregister;
}
ddata->cabc_mode = get_hw_cabc_mode(ddata);
}
max_brightness = 255;
if (ddata->has_bc)
brightness = acx565akm_get_actual_brightness(ddata);
else
brightness = 0;
bldev->props.max_brightness = max_brightness;
bldev->props.brightness = brightness;
acx565akm_bl_update_status(bldev);
ddata->vm = acx565akm_panel_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &acx565akm_ops;
dssdev->type = OMAP_DISPLAY_TYPE_SDI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
err_backlight_unregister:
backlight_device_unregister(bldev);
return r;
}
static int acx565akm_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group);
backlight_device_unregister(ddata->bl_dev);
omapdss_device_unregister(dssdev);
if (omapdss_device_is_enabled(dssdev))
acx565akm_disable(dssdev);
return 0;
}
static const struct of_device_id acx565akm_of_match[] = {
{ .compatible = "omapdss,sony,acx565akm", },
{},
};
MODULE_DEVICE_TABLE(of, acx565akm_of_match);
static struct spi_driver acx565akm_driver = {
.driver = {
.name = "acx565akm",
.of_match_table = acx565akm_of_match,
.suppress_bind_attrs = true,
},
.probe = acx565akm_probe,
.remove = acx565akm_remove,
};
module_spi_driver(acx565akm_driver);
MODULE_ALIAS("spi:sony,acx565akm");
MODULE_AUTHOR("Nokia Corporation");
MODULE_DESCRIPTION("acx565akm LCD Driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0-only
/*
* Toppoly TD028TTEC1 panel support
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* Neo 1973 code (jbt6k74.c):
* Copyright (C) 2006-2007 by OpenMoko, Inc.
* Author: Harald Welte <laforge@openmoko.org>
*
* Ported and adapted from Neo 1973 U-Boot by:
* H. Nikolaus Schaller <hns@goldelico.com>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct videomode vm;
struct backlight_device *backlight;
struct spi_device *spi_dev;
};
static const struct videomode td028ttec1_panel_vm = {
.hactive = 480,
.vactive = 640,
.pixelclock = 22153000,
.hfront_porch = 24,
.hsync_len = 8,
.hback_porch = 8,
.vfront_porch = 4,
.vsync_len = 2,
.vback_porch = 2,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define JBT_COMMAND 0x000
#define JBT_DATA 0x100
static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
{
int rc;
u16 tx_buf = JBT_COMMAND | reg;
rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
1*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_ret_write_0 spi_write ret %d\n", rc);
return rc;
}
static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
{
int rc;
u16 tx_buf[2];
tx_buf[0] = JBT_COMMAND | reg;
tx_buf[1] = JBT_DATA | data;
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
2*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_reg_write_1 spi_write ret %d\n", rc);
return rc;
}
static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
{
int rc;
u16 tx_buf[3];
tx_buf[0] = JBT_COMMAND | reg;
tx_buf[1] = JBT_DATA | (data >> 8);
tx_buf[2] = JBT_DATA | (data & 0xff);
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
3*sizeof(u16));
if (rc != 0)
dev_err(&ddata->spi_dev->dev,
"jbt_reg_write_2 spi_write ret %d\n", rc);
return rc;
}
enum jbt_register {
JBT_REG_SLEEP_IN = 0x10,
JBT_REG_SLEEP_OUT = 0x11,
JBT_REG_DISPLAY_OFF = 0x28,
JBT_REG_DISPLAY_ON = 0x29,
JBT_REG_RGB_FORMAT = 0x3a,
JBT_REG_QUAD_RATE = 0x3b,
JBT_REG_POWER_ON_OFF = 0xb0,
JBT_REG_BOOSTER_OP = 0xb1,
JBT_REG_BOOSTER_MODE = 0xb2,
JBT_REG_BOOSTER_FREQ = 0xb3,
JBT_REG_OPAMP_SYSCLK = 0xb4,
JBT_REG_VSC_VOLTAGE = 0xb5,
JBT_REG_VCOM_VOLTAGE = 0xb6,
JBT_REG_EXT_DISPL = 0xb7,
JBT_REG_OUTPUT_CONTROL = 0xb8,
JBT_REG_DCCLK_DCEV = 0xb9,
JBT_REG_DISPLAY_MODE1 = 0xba,
JBT_REG_DISPLAY_MODE2 = 0xbb,
JBT_REG_DISPLAY_MODE = 0xbc,
JBT_REG_ASW_SLEW = 0xbd,
JBT_REG_DUMMY_DISPLAY = 0xbe,
JBT_REG_DRIVE_SYSTEM = 0xbf,
JBT_REG_SLEEP_OUT_FR_A = 0xc0,
JBT_REG_SLEEP_OUT_FR_B = 0xc1,
JBT_REG_SLEEP_OUT_FR_C = 0xc2,
JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
JBT_REG_GAMMA1_FINE_1 = 0xc7,
JBT_REG_GAMMA1_FINE_2 = 0xc8,
JBT_REG_GAMMA1_INCLINATION = 0xc9,
JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
JBT_REG_BLANK_CONTROL = 0xcf,
JBT_REG_BLANK_TH_TV = 0xd0,
JBT_REG_CKV_ON_OFF = 0xd1,
JBT_REG_CKV_1_2 = 0xd2,
JBT_REG_OEV_TIMING = 0xd3,
JBT_REG_ASW_TIMING_1 = 0xd4,
JBT_REG_ASW_TIMING_2 = 0xd5,
JBT_REG_HCLOCK_VGA = 0xec,
JBT_REG_HCLOCK_QVGA = 0xed,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int td028ttec1_panel_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void td028ttec1_panel_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void td028ttec1_panel_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
int r = 0;
dev_dbg(dssdev->dev, "%s: state %d\n", __func__, dssdev->state);
/* three times command zero */
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
r |= jbt_ret_write_0(ddata, 0x00);
usleep_range(1000, 2000);
if (r) {
dev_warn(dssdev->dev, "%s: transfer error\n", __func__);
return;
}
/* deep standby out */
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
/* Quad mode off */
r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
/* AVDD on, XVDD on */
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
/* Output control */
r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
/* Sleep mode off */
r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
/* at this point we have like 50% grey */
/* initialize register set */
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
/*
* default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
* to avoid red / blue flicker
*/
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
if (r)
dev_err(dssdev->dev, "%s: write error\n", __func__);
backlight_enable(ddata->backlight);
}
static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
backlight_disable(ddata->backlight);
dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
}
static int td028ttec1_panel_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops td028ttec1_ops = {
.connect = td028ttec1_panel_connect,
.disconnect = td028ttec1_panel_disconnect,
.enable = td028ttec1_panel_enable,
.disable = td028ttec1_panel_disable,
.get_modes = td028ttec1_panel_get_modes,
};
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->bits_per_word = 9;
spi->mode = SPI_MODE_3;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
ddata->backlight = devm_of_find_backlight(&spi->dev);
if (IS_ERR(ddata->backlight))
return PTR_ERR(ddata->backlight);
dev_set_drvdata(&spi->dev, ddata);
ddata->spi_dev = spi;
ddata->vm = td028ttec1_panel_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &td028ttec1_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int td028ttec1_panel_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
omapdss_device_unregister(dssdev);
td028ttec1_panel_disable(dssdev);
return 0;
}
static const struct of_device_id td028ttec1_of_match[] = {
{ .compatible = "omapdss,tpo,td028ttec1", },
/* keep to not break older DTB */
{ .compatible = "omapdss,toppoly,td028ttec1", },
{},
};
MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
static const struct spi_device_id td028ttec1_ids[] = {
{ "toppoly,td028ttec1", 0 },
{ "tpo,td028ttec1", 0},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
.id_table = td028ttec1_ids,
.driver = {
.name = "panel-tpo-td028ttec1",
.of_match_table = td028ttec1_of_match,
.suppress_bind_attrs = true,
},
};
module_spi_driver(td028ttec1_spi_driver);
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* TPO TD043MTEA1 Panel driver
*
* Author: Gražvydas Ignotas <notasas@gmail.com>
* Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
#define TPO_R02_MODE(x) ((x) & 7)
#define TPO_R02_MODE_800x480 7
#define TPO_R02_NCLK_RISING BIT(3)
#define TPO_R02_HSYNC_HIGH BIT(4)
#define TPO_R02_VSYNC_HIGH BIT(5)
#define TPO_R03_NSTANDBY BIT(0)
#define TPO_R03_EN_CP_CLK BIT(1)
#define TPO_R03_EN_VGL_PUMP BIT(2)
#define TPO_R03_EN_PWM BIT(3)
#define TPO_R03_DRIVING_CAP_100 BIT(4)
#define TPO_R03_EN_PRE_CHARGE BIT(6)
#define TPO_R03_SOFTWARE_CTL BIT(7)
#define TPO_R04_NFLIP_H BIT(0)
#define TPO_R04_NFLIP_V BIT(1)
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
#define TPO_R04_VGL_FREQ_1H BIT(4)
#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
TPO_R03_SOFTWARE_CTL)
#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
static const u16 tpo_td043_def_gamma[12] = {
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
};
struct panel_drv_data {
struct omap_dss_device dssdev;
struct videomode vm;
struct spi_device *spi;
struct regulator *vcc_reg;
struct gpio_desc *reset_gpio;
u16 gamma[12];
u32 mode;
u32 vmirror:1;
u32 powered_on:1;
u32 spi_suspended:1;
u32 power_on_resume:1;
};
static const struct videomode tpo_td043_vm = {
.hactive = 800,
.vactive = 480,
.pixelclock = 36000000,
.hsync_len = 1,
.hfront_porch = 68,
.hback_porch = 214,
.vsync_len = 1,
.vfront_porch = 39,
.vback_porch = 34,
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
struct spi_transfer xfer;
u16 w;
int r;
spi_message_init(&m);
memset(&xfer, 0, sizeof(xfer));
w = ((u16)addr << 10) | (1 << 8) | data;
xfer.tx_buf = &w;
xfer.bits_per_word = 16;
xfer.len = 2;
spi_message_add_tail(&xfer, &m);
r = spi_sync(spi, &m);
if (r < 0)
dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
return r;
}
static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
{
u8 i, val;
/* gamma bits [9:8] */
for (val = i = 0; i < 4; i++)
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x11, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x12, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x13, val);
/* gamma bits [7:0] */
for (val = i = 0; i < 12; i++)
tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
}
static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
{
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
if (h)
reg4 &= ~TPO_R04_NFLIP_H;
if (v)
reg4 &= ~TPO_R04_NFLIP_V;
return tpo_td043_write(spi, 4, reg4);
}
static ssize_t tpo_td043_vmirror_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
}
static ssize_t tpo_td043_vmirror_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int val;
int ret;
ret = kstrtoint(buf, 0, &val);
if (ret < 0)
return ret;
val = !!val;
ret = tpo_td043_write_mirror(ddata->spi, false, val);
if (ret < 0)
return ret;
ddata->vmirror = val;
return count;
}
static ssize_t tpo_td043_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
}
static ssize_t tpo_td043_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
long val;
int ret;
ret = kstrtol(buf, 0, &val);
if (ret != 0 || val & ~7)
return -EINVAL;
ddata->mode = val;
val |= TPO_R02_NCLK_RISING;
tpo_td043_write(ddata->spi, 2, val);
return count;
}
static ssize_t tpo_td043_gamma_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
ssize_t len = 0;
int ret;
int i;
for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
ddata->gamma[i]);
if (ret < 0)
return ret;
len += ret;
}
buf[len - 1] = '\n';
return len;
}
static ssize_t tpo_td043_gamma_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
unsigned int g[12];
int ret;
int i;
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
if (ret != 12)
return -EINVAL;
for (i = 0; i < 12; i++)
ddata->gamma[i] = g[i];
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
return count;
}
static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
tpo_td043_vmirror_show, tpo_td043_vmirror_store);
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
tpo_td043_mode_show, tpo_td043_mode_store);
static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
tpo_td043_gamma_show, tpo_td043_gamma_store);
static struct attribute *tpo_td043_attrs[] = {
&dev_attr_vmirror.attr,
&dev_attr_mode.attr,
&dev_attr_gamma.attr,
NULL,
};
static const struct attribute_group tpo_td043_attr_group = {
.attrs = tpo_td043_attrs,
};
static int tpo_td043_power_on(struct panel_drv_data *ddata)
{
int r;
if (ddata->powered_on)
return 0;
r = regulator_enable(ddata->vcc_reg);
if (r != 0)
return r;
/* wait for panel to stabilize */
msleep(160);
gpiod_set_value(ddata->reset_gpio, 0);
tpo_td043_write(ddata->spi, 2,
TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
tpo_td043_write(ddata->spi, 0x20, 0xf0);
tpo_td043_write(ddata->spi, 0x21, 0xf0);
tpo_td043_write_mirror(ddata->spi, false, ddata->vmirror);
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
ddata->powered_on = 1;
return 0;
}
static void tpo_td043_power_off(struct panel_drv_data *ddata)
{
if (!ddata->powered_on)
return;
tpo_td043_write(ddata->spi, 3,
TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
gpiod_set_value(ddata->reset_gpio, 1);
/* wait for at least 2 vsyncs before cutting off power */
msleep(50);
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
regulator_disable(ddata->vcc_reg);
ddata->powered_on = 0;
}
static int tpo_td043_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void tpo_td043_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void tpo_td043_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
int r;
/*
* If we are resuming from system suspend, SPI clocks might not be
* enabled yet, so we'll program the LCD from SPI PM resume callback.
*/
if (!ddata->spi_suspended) {
r = tpo_td043_power_on(ddata);
if (r) {
dev_err(&ddata->spi->dev, "%s: power on failed (%d)\n",
__func__, r);
return;
}
}
}
static void tpo_td043_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
if (!ddata->spi_suspended)
tpo_td043_power_off(ddata);
}
static int tpo_td043_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops tpo_td043_ops = {
.connect = tpo_td043_connect,
.disconnect = tpo_td043_disconnect,
.enable = tpo_td043_enable,
.disable = tpo_td043_disable,
.get_modes = tpo_td043_get_modes,
};
static int tpo_td043_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct gpio_desc *gpio;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
ddata->mode = TPO_R02_MODE_800x480;
memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
if (IS_ERR(ddata->vcc_reg)) {
dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
return PTR_ERR(ddata->vcc_reg);
}
gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to get reset gpio\n");
return PTR_ERR(gpio);
}
ddata->reset_gpio = gpio;
r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
if (r) {
dev_err(&spi->dev, "failed to create sysfs files\n");
return r;
}
ddata->vm = tpo_td043_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &tpo_td043_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int tpo_td043_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
omapdss_device_unregister(dssdev);
if (omapdss_device_is_enabled(dssdev))
tpo_td043_disable(dssdev);
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tpo_td043_spi_suspend(struct device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
ddata->power_on_resume = ddata->powered_on;
tpo_td043_power_off(ddata);
ddata->spi_suspended = 1;
return 0;
}
static int tpo_td043_spi_resume(struct device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "tpo_td043_spi_resume\n");
if (ddata->power_on_resume) {
ret = tpo_td043_power_on(ddata);
if (ret)
return ret;
}
ddata->spi_suspended = 0;
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
tpo_td043_spi_suspend, tpo_td043_spi_resume);
static const struct of_device_id tpo_td043_of_match[] = {
{ .compatible = "omapdss,tpo,td043mtea1", },
{},
};
MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
static struct spi_driver tpo_td043_spi_driver = {
.driver = {
.name = "panel-tpo-td043mtea1",
.pm = &tpo_td043_spi_pm,
.of_match_table = tpo_td043_of_match,
.suppress_bind_attrs = true,
},
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
};
module_spi_driver(tpo_td043_spi_driver);
MODULE_ALIAS("spi:tpo,td043mtea1");
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
MODULE_LICENSE("GPL");
...@@ -176,17 +176,10 @@ static const struct of_device_id omapdss_of_match[] __initconst = { ...@@ -176,17 +176,10 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = { static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
{ .compatible = "composite-video-connector" }, { .compatible = "composite-video-connector" },
{ .compatible = "hdmi-connector" }, { .compatible = "hdmi-connector" },
{ .compatible = "lgphilips,lb035q02" },
{ .compatible = "nec,nl8048hl11" },
{ .compatible = "panel-dsi-cm" }, { .compatible = "panel-dsi-cm" },
{ .compatible = "sharp,ls037v7dw01" },
{ .compatible = "sony,acx565akm" },
{ .compatible = "svideo-connector" }, { .compatible = "svideo-connector" },
{ .compatible = "ti,opa362" }, { .compatible = "ti,opa362" },
{ .compatible = "ti,tpd12s015" }, { .compatible = "ti,tpd12s015" },
{ .compatible = "toppoly,td028ttec1" },
{ .compatible = "tpo,td028ttec1" },
{ .compatible = "tpo,td043mtea1" },
{}, {},
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment