USB: otg: twl4030: fix wrong assumption of starting state

The reset state of twl4030-usb is not sleeping, it starts
up awaken and we need to disable it if we have booted
with a disconnected cable to avoid over consumption on
the default state.

To avoid problems later, we read the current state of the
transceiver from the PHY_PWR_CTRL register. The bootloader
can, anyways, put the device to sleep before us.

Tested on a custom OMAP board.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/otg/twl4030-usb.c

@@ -550,6 +550,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 	struct twl4030_usb	*twl;
 	int			status, err;
+	u8			pwr;
 
 	if (!pdata) {
 		dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -568,7 +569,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	twl->otg.set_peripheral	= twl4030_set_peripheral;
 	twl->otg.set_suspend	= twl4030_set_suspend;
 	twl->usb_mode		= pdata->usb_mode;
-	twl->asleep		= 1;
+
+	pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+	twl->asleep		= (pwr & PHY_PWR_PHYPWD);
 
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);