Skip to content

L
linux
Commit 464c2572 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Mauro Carvalho Chehab
Browse files
Options

media: dt-bindings: samsung,fimc: convert to dtschema 

Convert the Samsung S5P/Exynos Camera Subsystem (FIMC) bindings to DT
schema.  Changes during conversion - adjust to existing DTS and Linux
driver: add iommus and power-domains.
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent 9f7d8d88
Hide whitespace changes
Inline Side-by-side
Showing with 433 additions and 210 deletions
Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml 0 → 100644
View file @ 464c2572
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
description:
Each FIMC device should have an alias in the aliases node, in the form of
fimc<n>, where <n> is an integer specifying the IP block instance.
properties:
compatible:
enum:
- samsung,exynos4210-fimc
- samsung,exynos4212-fimc
- samsung,s5pv210-fimc
reg:
maxItems: 1
clocks:
maxItems: 2
clock-names:
items:
- const: fimc
- const: sclk_fimc
clock-frequency:
description:
Maximum FIMC local clock (LCLK) frequency.
interrupts:
maxItems: 1
iommus:
maxItems: 1
power-domains:
maxItems: 1
samsung,cam-if:
type: boolean
description:
The FIMC IP block includes the camera input interface.
samsung,isp-wb:
type: boolean
description: |
The FIMC IP block has the ISP writeback input.
samsung,lcd-wb:
type: boolean
description: |
The FIMC IP block has the LCD writeback input.
samsung,mainscaler-ext:
type: boolean
description:
FIMC IP supports extended image size and has CIEXTEN register.
samsung,min-pix-alignment:
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: Minimum supported image height alignment.
- description: Horizontal image offset.
description:
The values are in pixels and default is <2 1>.
samsung,min-pix-sizes:
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description: |
An array specyfing minimum image size in pixels at the FIMC input and
output DMA, in the first and second cell respectively. Default value
is <16 16>.
samsung,pix-limits:
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 4
description: |
An array of maximum supported image sizes in pixels, for details refer to
Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as
follows:
0 - scaler input horizontal size
1 - input horizontal size for the scaler bypassed
2 - REAL_WIDTH without input rotation
3 - REAL_HEIGHT with input rotation
samsung,rotators:
$ref: /schemas/types.yaml#/definitions/uint32
default: 0x11
description: |
A bitmask specifying whether this IP has the input and the output
rotator. Bits 4 and 0 correspond to input and output rotator
respectively. If a rotator is present its corresponding bit should be
set.
samsung,sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
description:
System Registers (SYSREG) node.
required:
- compatible
- reg
- clocks
- clock-names
- samsung,pix-limits
allOf:
- if:
required:
- samsung,isp-wb
then:
required:
- samsung,sysreg
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
fimc@11800000 {
compatible = "samsung,exynos4212-fimc";
reg = <0x11800000 0x1000>;
clocks = <&clock CLK_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&sysmmu_fimc0>;
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,cam-if;
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
};
Documentation/devicetree/bindings/media/samsung,fimc.yaml 0 → 100644
View file @ 464c2572
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/samsung,fimc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
description: |
The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
represented by separate device tree nodes. Currently this includes: Fully
Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI
CSIS, FIMC-LITE and FIMC-IS (ISP).
properties:
compatible:
const: samsung,fimc
ranges: true
'#address-cells':
const: 1
'#size-cells':
const: 1
'#clock-cells':
const: 1
description: |
The clock specifier cell stores an index of a clock: 0, 1 for
CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
clocks:
minItems: 2
maxItems: 4
clock-names:
minItems: 2
items:
- const: sclk_cam0
- const: sclk_cam1
- const: pxl_async0
- const: pxl_async1
clock-output-names:
maxItems: 2
parallel-ports:
$ref: /schemas/graph.yaml#/properties/ports
description:
Active parallel video input ports.
patternProperties:
"^port@[01]$":
$ref: /schemas/graph.yaml#/$defs/port-base
description:
Camera A and camera B inputs.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
pinctrl-names:
minItems: 1
items:
- const: default
- const: idle
- const: active_a
- const: active_b
patternProperties:
"^csis@[0-9a-f]+$":
type: object
$ref: samsung,exynos4210-csis.yaml#
description: MIPI CSI-2 receiver.
"^fimc@[0-9a-f]+$":
type: object
$ref: samsung,exynos4210-fimc.yaml#
description: Fully Integrated Mobile Camera.
"^fimc-is@[0-9a-f]+$":
type: object
$ref: samsung,exynos4212-fimc-is.yaml#
description: Imaging Subsystem (FIMC-IS).
"^fimc-lite@[0-9a-f]+$":
type: object
$ref: samsung,exynos4212-fimc-lite.yaml#
description: Camera host interface (FIMC-LITE).
required:
- compatible
- '#address-cells'
- '#clock-cells'
- clocks
- clock-names
- clock-output-names
- ranges
- '#size-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
camera@11800000 {
compatible = "samsung,fimc";
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x18000000>;
clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
clock-output-names = "cam_a_clkout", "cam_b_clkout";
assigned-clocks = <&clock CLK_MOUT_CAM0>,
<&clock CLK_MOUT_CAM1>;
assigned-clock-parents = <&clock CLK_XUSBXTI>,
<&clock CLK_XUSBXTI>;
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
fimc@11800000 {
compatible = "samsung,exynos4212-fimc";
reg = <0x11800000 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
iommus = <&sysmmu_fimc0>;
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,cam-if;
};
/* ... FIMC 1-3 */
csis@11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>,
<&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
assigned-clocks = <&clock CLK_MOUT_CSIS0>,
<&clock CLK_SCLK_CSIS0>;
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
assigned-clock-rates = <0>, <176000000>;
bus-width = <4>;
power-domains = <&pd_cam>;
phys = <&mipi_phy 0>;
phy-names = "csis";
#address-cells = <1>;
#size-cells = <0>;
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
/* Camera C (3) MIPI CSI-2 (CSIS0) */
port@3 {
reg = <3>;
endpoint {
remote-endpoint = <&s5c73m3_ep>;
data-lanes = <1 2 3 4>;
samsung,csis-hs-settle = <12>;
};
};
};
/* ... CSIS 1 */
fimc-lite@12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
clock-names = "flite";
iommus = <&sysmmu_fimc_lite0>;
};
/* ... FIMC-LITE 1 */
fimc-is@12000000 {
compatible = "samsung,exynos4212-fimc-is";
reg = <0x12000000 0x260000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
<&isp_clock CLK_ISP_FIMC_LITE1>,
<&isp_clock CLK_ISP_PPMUISPX>,
<&isp_clock CLK_ISP_PPMUISPMX>,
<&isp_clock CLK_ISP_FIMC_ISP>,
<&isp_clock CLK_ISP_FIMC_DRC>,
<&isp_clock CLK_ISP_FIMC_FD>,
<&isp_clock CLK_ISP_MCUISP>,
<&isp_clock CLK_ISP_GICISP>,
<&isp_clock CLK_ISP_MCUCTL_ISP>,
<&isp_clock CLK_ISP_PWM_ISP>,
<&isp_clock CLK_ISP_DIV_ISP0>,
<&isp_clock CLK_ISP_DIV_ISP1>,
<&isp_clock CLK_ISP_DIV_MCUISP0>,
<&isp_clock CLK_ISP_DIV_MCUISP1>,
<&clock CLK_MOUT_MPLL_USER_T>,
<&clock CLK_ACLK200>,
<&clock CLK_ACLK400_MCUISP>,
<&clock CLK_DIV_ACLK200>,
<&clock CLK_DIV_ACLK400_MCUISP>,
<&clock CLK_UART_ISP_SCLK>;
clock-names = "lite0", "lite1", "ppmuispx",
"ppmuispmx", "isp",
"drc", "fd", "mcuisp",
"gicisp", "mcuctl_isp", "pwm_isp",
"ispdiv0", "ispdiv1", "mcuispdiv0",
"mcuispdiv1", "mpll", "aclk200",
"aclk400mcuisp", "div_aclk200",
"div_aclk400mcuisp", "uart";
iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
<&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
iommu-names = "isp", "drc", "fd", "mcuctl";
power-domains = <&pd_isp>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pmu@10020000 {
reg = <0x10020000 0x3000>;
};
i2c-isp@12140000 {
compatible = "samsung,exynos4212-i2c-isp";
reg = <0x12140000 0x100>;
clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
clock-names = "i2c_isp";
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
image-sensor@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
svddio-supply = <&ldo19_reg>;
afvdd-supply = <&ldo19_reg>;
clock-frequency = <24000000>;
/* CAM_B_CLKOUT */
clocks = <&camera 1>;
clock-names = "extclk";
gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
port {
endpoint {
remote-endpoint = <&csis1_ep>;
data-lanes = <1>;
};
};
};
};
};
};
Documentation/devicetree/bindings/media/samsung-fimc.txt deleted 100644 → 0
View file @ 9f7d8d88
Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
----------------------------------------------
The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
represented by separate device tree nodes. Currently this includes: FIMC (in
the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
The sub-subdevices are defined as child nodes of the common 'camera' node which
also includes common properties of the whole subsystem not really specific to
any single sub-device, like common camera port pins or the CAMCLK clock outputs
for external image sensors attached to an SoC.
Common 'camera' node
--------------------
Required properties:
- compatible: must be "samsung,fimc"
- clocks: list of clock specifiers, corresponding to entries in
the clock-names property;
- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
"pxl_async1" entries, matching entries in the clocks property.
- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
must be 1. A clock provider is associated with the 'camera' node and it should
be referenced by external sensors that use clocks provided by the SoC on
CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
- clock-output-names: from the common clock bindings, should contain names of
clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
CAM_B_CLKOUT output clocks respectively.
The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
to define a required pinctrl state named "default" and optional pinctrl states:
"idle", "active-a", active-b". These optional states can be used to switch the
camera port pinmux at runtime. The "idle" state should configure both the camera
ports A and B into high impedance state, especially the CAMCLK clock output
should be inactive. For the "active-a" state the camera port A must be activated
and the port B deactivated and for the state "active-b" it should be the other
way around.
The 'camera' node must include at least one 'fimc' child node.
'fimc' device nodes
-------------------
Required properties:
- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
- reg: physical base address and length of the registers set for the device;
- interrupts: should contain FIMC interrupt;
- clocks: list of clock specifiers, must contain an entry for each required
entry in clock-names;
- clock-names: must contain "fimc", "sclk_fimc" entries.
- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
each cell is as follows:
0 - scaler input horizontal size,
1 - input horizontal size for the scaler bypassed,
2 - REAL_WIDTH without input rotation,
3 - REAL_HEIGHT with input rotation,
- samsung,sysreg: a phandle to the SYSREG node.
Each FIMC device should have an alias in the aliases node, in the form of
fimc<n>, where <n> is an integer specifying the IP block instance.
Optional properties:
- clock-frequency: maximum FIMC local clock (LCLK) frequency;
- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
the FIMC input and output DMA, in the first and second cell respectively.
Default value when this property is not present is <16 16>;
- samsung,min-pix-alignment: minimum supported image height alignment (first
cell) and the horizontal image offset (second cell). The values are in pixels
and default to <2 1> when this property is not present;
- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
supports extended image size and has CIEXTEN register;
- samsung,rotators: a bitmask specifying whether this IP has the input and
the output rotator. Bits 4 and 0 correspond to input and output rotator
respectively. If a rotator is present its corresponding bit should be set.
Default value when this property is not specified is 0x11.
- samsung,cam-if: a bolean property indicating whether the IP block includes
the camera input interface.
- samsung,isp-wb: this property must be present if the IP block has the ISP
writeback input.
- samsung,lcd-wb: this property must be present if the IP block has the LCD
writeback input.
'parallel-ports' node
---------------------
This node should contain child 'port' nodes specifying active parallel video
input ports. It includes camera A and camera B inputs. 'reg' property in the
port nodes specifies data input - 1, 2 indicates input A, B respectively.
Optional properties
- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
Image sensor nodes
------------------
The sensor device nodes should be added to their control bus controller (e.g.
I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
using the common video interfaces bindings, defined in video-interfaces.txt.
Example:
aliases {
fimc0 = &fimc_0;
};
/* Parallel bus IF sensor */
i2c_0: i2c@13860000 {
s5k6aa: sensor@3c {
compatible = "samsung,s5k6aafx";
reg = <0x3c>;
vddio-supply = <...>;
clock-frequency = <24000000>;
clocks = <&camera 1>;
clock-names = "mclk";
port {
s5k6aa_ep: endpoint {
remote-endpoint = <&fimc0_ep>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <1>;
pclk-sample = <1>;
};
};
};
/* MIPI CSI-2 bus IF sensor */
s5c73m3: sensor@1a {
compatible = "samsung,s5c73m3";
reg = <0x1a>;
vddio-supply = <...>;
clock-frequency = <24000000>;
clocks = <&camera 0>;
clock-names = "mclk";
port {
s5c73m3_1: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&csis0_ep>;
};
};
};
};
camera@11800000 {
compatible = "samsung,fimc";
clocks = <&clock 132>, <&clock 133>, <&clock 351>,
<&clock 352>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
"pxl_async1";
#clock-cells = <1>;
clock-output-names = "cam_a_clkout", "cam_b_clkout";
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
/* parallel camera ports */
parallel-ports {
/* camera A input */
port@1 {
reg = <1>;
fimc0_ep: endpoint {
remote-endpoint = <&s5k6aa_ep>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <1>;
pclk-sample = <1>;
};
};
};
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 85 0>;
};
csis_0: csis@11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x1000>;
interrupts = <0 78 0>;
/* camera C input */
port@3 {
reg = <3>;
csis0_ep: endpoint {
remote-endpoint = <&s5c73m3_ep>;
data-lanes = <1 2 3 4>;
samsung,csis-hs-settle = <12>;
};
};
};
};
The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
MAINTAINERS
View file @ 464c2572
......@@ -18523,8 +18523,10 @@ L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
F: Documentation/devicetree/bindings/media/samsung,fimc.yaml
F: drivers/media/platform/samsung/exynos4-is/
SAMSUNG SOC CLOCK DRIVERS
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7