Skip to content

L
linux
Commit 46680fe9 authored by Yassine Oudjana's avatar Yassine Oudjana Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: msm8996: Add support for the Xiaomi MSM8996 platform 

There are 5 Xiaomi devices with the MSM8996 SoC:

 - Mi 5 (gemini): MSM8996 + PMI8994
 - Mi Note 2 (scorpio): MSM8996 Pro + PMI8996
 - Mi 5s (capricorn): MSM8996 Pro + PMI8996
 - Mi Mix (lithium): MSM8996 Pro + PMI8996
 - Mi 5s Plus (natrium): MSM8996 Pro + PMI8996

These devices share a common board design with only a few differences.
Add support for the common board, as well as support for the Mi Note 2.
Signed-off-by: default avatarYassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-4-y.oudjana@protonmail.com
parent 214faf07
Show whitespace changes
Inline Side-by-side
Showing with 1105 additions and 0 deletions
arch/arm64/boot/dts/qcom/Makefile
View file @ 46680fe9
......@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
......
arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi 0 → 100644
View file @ 46680fe9
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
*/
/dts-v1/;
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
clocks {
compatible = "simple-bus";
divclk1_cdc: divclk1 {
compatible = "gpio-gate-clock";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&divclk1_default>;
};
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "divclk4";
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
};
gpio_keys {
compatible = "gpio-keys";
vol_up {
label = "Volume Up";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
};
dome {
label = "Home";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
wakeup-source;
debounce-interval = <15>;
};
};
reserved-memory {
memory@88800000 {
reg = <0x0 0x88800000 0x0 0x1400000>;
no-map;
};
/* This platform has all PIL regions offset by 0x1400000 */
/delete-node/ mpss@88800000;
mpss_region: mpss@89c00000 {
reg = <0x0 0x89c00000 0x0 0x6200000>;
no-map;
};
/delete-node/ adsp@8ea00000;
adsp_region: adsp@8ea00000 {
reg = <0x0 0x8fe00000 0x0 0x1b00000>;
no-map;
};
/delete-node/ slpi@90b00000;
slpi_region: slpi@91900000 {
reg = <0x0 0x91900000 0x0 0xa00000>;
no-map;
};
/delete-node/ gpu@8f200000;
zap_shader_region: gpu@92300000 {
compatible = "shared-dma-pool";
reg = <0x0 0x92300000 0x0 0x2000>;
no-map;
};
/delete-node/ venus@91000000;
venus_region: venus@90400000 {
reg = <0x0 0x92400000 0x0 0x500000>;
no-map;
};
ramoops@92900000 {
compatible = "ramoops";
reg = <0x0 0x92900000 0x0 0x100000>;
no-map;
record-size = <0x8000>;
console-size = <0x80000>;
ftrace-size = <0x20000>;
pmsg-size = <0x40000>;
};
/delete-node/ rmtfs@86700000;
rmtfs@f6c00000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xf6c00000 0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
/delete-node/ mba@91500000;
mba_region: mba@f6f00000 {
reg = <0x0 0xf6f00000 0x0 0x100000>;
no-map;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v2_tp: vdd-3v2-tp {
compatible = "regulator-fixed";
regulator-name = "vdd_3v2_tp";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
startup-delay-us = <4000>;
vin-supply = <&vph_pwr>;
gpio = <&tlmm 73 0>;
enable-active-high;
};
vdd_3v3: rome-vreg {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <4000>;
vin-supply = <&vph_pwr_bbyp>;
gpio = <&pm8994_gpios 9 0>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&rome_enable_default>;
/* Required by QCA6174a - vddpe-3v3 */
regulator-always-on;
};
/* WL_EN pin defined as a fixed regulator */
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8994_gpios 8 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default>;
};
};
&adsp_pil {
status = "okay";
};
&blsp2_i2c2 {
status = "okay";
label = "NFC_I2C";
nfc: pn548@28 {
compatible = "nxp,nxp-nci-i2c";
reg = <0x28>;
clock-frequency = <400000>;
interrupt-parent = <&tlmm>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default>;
};
};
&blsp2_i2c3 {
status = "okay";
label = "TYPEC_I2C";
typec: tusb320@47 {
compatible = "ti,tusb320";
reg = <0x47>;
interrupt-parent = <&tlmm>;
interrupts = <63 IRQ_TYPE_EDGE_RISING>;
};
};
&blsp2_i2c6 {
status = "okay";
label = "MSM_TS_I2C";
};
&blsp1_uart2 {
status = "okay";
label = "QCA_UART";
bluetooth: qca6174a {
compatible = "qcom,qca6174-bt";
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
clocks = <&divclk4>;
};
};
&dsi0 {
status = "okay";
vdd-supply = <&vreg_l2a_1p25>;
vddio-supply = <&vreg_l14a_1p8>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
};
&dsi0_out {
status = "okay";
data-lanes = <0 1 2 3>;
};
&dsi0_phy {
status = "okay";
vcca-supply = <&vreg_l28a_0p925>;
};
&gpu {
status = "okay";
};
&mdss {
status = "okay";
};
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
&pcie0 {
status = "okay";
/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&usb3 {
status = "okay";
extcon = <&typec>;
qcom,select-utmi-as-pipe-clk;
dwc3@6a00000 {
extcon = <&typec>;
/* usb3-phy is not used on this device */
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
snps,is-utmi-l1-suspend;
snps,usb2-gadget-lpm-disable;
snps,hird-threshold = /bits/ 8 <0>;
};
};
&hsusb_phy1 {
status = "okay";
extcon = <&typec>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&ufshc {
status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l25a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
vddp-ref-clk-max-microamp = <100>;
vddp-ref-clk-always-on;
};
&venus {
status = "okay";
};
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&divclk1_cdc>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-vbat-supply = <&vph_pwr>;
vdd-micbias-supply = <&vph_pwr_bbyp>;
vdd-io-supply = <&vreg_s4a_1p8>;
};
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
vdd_s8-supply = <&vph_pwr>;
vdd_s9-supply = <&vph_pwr>;
vdd_s10-supply = <&vph_pwr>;
vdd_s11-supply = <&vph_pwr>;
vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&vreg_s1b_1p025>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
vdd_l25-supply = <&vreg_s3a_1p3>;
vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
/* Required by QCA6174a - vdd-core */
regulator-always-on;
};
vreg_s4a_1p8: s4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
/* Required by QCA6174a - vddio */
regulator-always-on;
};
vreg_s5a_2p15: s5 {
regulator-name = "vreg_s5a_2p15";
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
vreg_s7a_0p8: s7 {
regulator-name = "vreg_s7a_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
vreg_l1a_1p0: l1 {
regulator-name = "vreg_l1a_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l2a_1p25: l2 {
regulator-name = "vreg_l2a_1p25";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
vreg_l4a_1p225: l4 {
regulator-name = "vreg_l4a_1p225";
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
vreg_l6a_1p8: l6 {
regulator-name = "vreg_l6a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l8a_1p8: l8 {
regulator-name = "vreg_l8a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l9a_1p8: l9 {
regulator-name = "vreg_l9a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l10a_1p8: l10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l12a_1p8: l12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
vreg_l13a_2p95: l13 {
regulator-name = "vreg_l13a_2p95";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vreg_l14a_1p8: l14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l15a_1p8: l15 {
regulator-name = "vreg_l15a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l16a_2p7: l16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
vreg_l19a_3p3: l19 {
regulator-name = "vreg_l19a_3p3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
vreg_l20a_2p95: l20 {
regulator-name = "vreg_l20a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-name = "vreg_l21a_2p95";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vreg_l23a_2p8: l23 {
regulator-name = "vreg_l23a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l24a_3p075: l24 {
regulator-name = "vreg_l24a_3p075";
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
vreg_l25a_1p2: l25 {
regulator-name = "vreg_l25a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
vreg_l27a_1p2: l27 {
regulator-name = "vreg_l27a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vreg_l28a_0p925: l28 {
regulator-name = "vreg_l28a_0p925";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
vreg_l30a_1p8: l30 {
regulator-name = "vreg_l30a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* Required by QCA6174a - vddio-xtal */
regulator-always-on;
};
vreg_l32a_1p8: l32 {
regulator-name = "vreg_l32a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs2a_1p8: lvs2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
pmi8994-regulators {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_bst_byp-supply = <&vph_pwr>;
vreg_s1b_1p025: s1 {
regulator-name = "vreg_s1b_1p025";
regulator-min-microvolt = <1025000>;
regulator-max-microvolt = <1025000>;
};
vph_pwr_bbyp: boost-bypass {
regulator-name = "vph_pwr_bbyp";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3600000>;
};
};
};
&pm8994_spmi_regulators {
qcom,saw-reg = <&saw3>;
s8 {
qcom,saw-slave;
};
s9 {
qcom,saw-slave;
};
s10 {
qcom,saw-slave;
};
vreg_apc_0p8: s11 {
qcom,saw-leader;
regulator-name = "vreg_apc_0p8";
regulator-min-microvolt = <470000>;
regulator-max-microvolt = <1140000>;
regulator-max-step-microvolt = <150000>;
regulator-always-on;
};
};
&pmi8994_spmi_regulators {
vdd_gfx: s2 {
regulator-name = "vdd_gfx";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1015000>;
regulator-enable-ramp-delay = <500>;
};
};
&pm8994_gpios {
wlan_en_default: wlan-en-default {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
power-source = <PM8994_GPIO_S4>;
bias-disable;
};
rome_enable_default: rome-enable-default {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
power-source = <PM8994_GPIO_VPH>;
};
divclk1_default: divclk1_default {
pins = "gpio15";
function = PMIC_GPIO_FUNC_FUNC1;
bias-disable;
power-source = <PM8994_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
divclk4_pin_a: divclk4 {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
&tlmm {
mdss_dsi_default: mdss_dsi_default {
pins = "gpio8";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
mdss_dsi_sleep: mdss_dsi_sleep {
pins = "gpio8";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
mdss_te_default: mdss_te_default {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
mdss_te_sleep: mdss_te_sleep {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
nfc_default: nfc_default {
pins = "gpio12", "gpio21";
function = "gpio";
drive-strength = <16>;
bias-pull-up;
};
};
arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts 0 → 100644
View file @ 46680fe9
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
*/
/dts-v1/;
#include "msm8996-xiaomi-common.dtsi"
#include "pmi8996.dtsi"
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
/ {
model = "Xiaomi Mi Note 2";
compatible = "xiaomi,scorpio", "qcom,msm8996";
qcom,msm-id = <305 0x10000>;
qcom,board-id = <34 0>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer0: framebuffer@83401000 {
compatible = "simple-framebuffer";
reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>;
width = <1080>;
height = <1920>;
stride = <(1080 * 3)>;
format = "r8g8b8";
/* DSI0 and MDP SMMU clocks */
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MMSS_MMAGIC_AHB_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc SMMU_MDP_AHB_CLK>,
<&mmcc SMMU_MDP_AXI_CLK>;
/* MDSS power domain */
power-domains = <&mmcc MDSS_GDSC>;
};
};
reserved-memory {
cont_splash_mem: memory@83401000 {
reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>;
no-map;
};
};
};
&adsp_pil {
firmware-name = "qcom/msm8996/scorpio/adsp.mbn";
};
&blsp2_i2c6 {
touchscreen: atmel-mxt-ts@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupt-parent = <&tlmm>;
interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
vdda-supply = <&vreg_l6a_1p8>;
vdd-supply = <&vdd_3v2_tp>;
reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&touchscreen_default>;
pinctrl-1 = <&touchscreen_sleep>;
};
};
&gpu {
zap-shader {
firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
};
};
&mdp_smmu {
/*
* Probing this SMMU causes a crash due to writing to some secure
* registers. Disable it for now.
*/
status = "disabled";
};
&mdss {
/*
* MDSS depends on the MDP SMMU, and probing it alters the bootloader
* configured framebuffer used by simplefb. Disable it for now.
*/
status = "disabled";
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "scorpio";
audio-routing = "RX_BIAS", "MCLK";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_6_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 6>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 1>;
};
};
};
&venus {
firmware-name = "qcom/msm8996/scorpio/venus.mbn";
};
&rpm_requests {
pm8994-regulators {
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
};
vreg_l11a_1p1: l11 {
regulator-name = "vreg_l11a_1p1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l18a_2p8: l18 {
regulator-name = "vreg_l18a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l22a_3p0: l22 {
regulator-name = "vreg_l22a_3p0";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <3500000>;
};
vreg_l29a_2p7: l29 {
regulator-name = "vreg_l29a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
};
&vdd_gfx {
regulator-max-microvolt = <1065000>;
};
&pm8994_gpios {
gpio-line-names =
"NC", /* GPIO_1 */
"VOL_UP_N", /* GPIO_2 */
"SPKR_ID", /* GPIO_3 */
"PWM_HAPTICS", /* GPIO_4 */
"INFARED_DRV", /* GPIO_5 */
"NC", /* GPIO_6 */
"KEYPAD_LED_EN_A", /* GPIO_7 */
"WL_EN", /* GPIO_8 */
"3P3_ENABLE", /* GPIO_9 */
"KEYPAD_LED_EN_B", /* GPIO_10 */
"FP_ID", /* GPIO_11 */
"NC", /* GPIO_12 */
"NC", /* GPIO_13 */
"NC", /* GPIO_14 */
"DIVCLK1_CDC", /* GPIO_15 */
"DIVCLK2_HAPTICS", /* GPIO_16 */
"NC", /* GPIO_17 */
"32KHz_CLK_IN", /* GPIO_18 */
"BT_EN", /* GPIO_19 */
"PMIC_SLB", /* GPIO_20 */
"UIM_BATT_ALARM", /* GPIO_21 */
"NC"; /* GPIO_22 */
};
&pm8994_mpps {
gpio-line-names =
"VREF_SDC_UIM_APC", /* MPP_1 */
"NC", /* MPP_2 */
"VREF_DACX", /* MPP_3 */
"NC", /* MPP_4 */
"NC", /* MPP_5 */
"STAT_SMB1351", /* MPP_6 */
"NC", /* MPP_7 */
"NC"; /* MPP_8 */
};
&pmi8994_gpios {
gpio-line-names =
"NC", /* GPIO_1 */
"SPKR_PA_RST", /* GPIO_2 */
"NC", /* GPIO_3 */
"NC", /* GPIO_4 */
"NC", /* GPIO_5 */
"NC", /* GPIO_6 */
"NC", /* GPIO_7 */
"NC", /* GPIO_8 */
"NC", /* GPIO_9 */
"NC"; /* GPIO_10 */
};
&tlmm {
gpio-line-names =
"ESE_SPI_MOSI", /* GPIO_0 */
"ESE_SPI_MISO", /* GPIO_1 */
"NC", /* GPIO_2 */
"ESE_SPI_CLK", /* GPIO_3 */
"MSM_UART_TX", /* GPIO_4 */
"MSM_UART_RX", /* GPIO_5 */
"NFC_I2C_SDA", /* GPIO_6 */
"NFC_I2C_SCL", /* GPIO_7 */
"OLED_RESET_N", /* GPIO_8 */
"NFC_IRQ", /* GPIO_9 */
"OLED_TE", /* GPIO_10 */
"OLED_ID_DET1", /* GPIO_11 */
"NFC_DISABLE", /* GPIO_12 */
"CAM_MCLK0", /* GPIO_13 */
"OLED_ID_DET2", /* GPIO_14 */
"CAM_MCLK2", /* GPIO_15 */
"ESE_PWR_REQ", /* GPIO_16 */
"CCI_I2C_SDA0", /* GPIO_17 */
"CCI_I2C_SCL0", /* GPIO_18 */
"CCI_I2C_SDA1", /* GPIO_19 */
"CCI_I2C_SCL1", /* GPIO_20 */
"NFC_DWL_REQ", /* GPIO_21 */
"CCI_TIMER1", /* GPIO_22 */
"WEBCAM1_RESET_N", /* GPIO_23 */
"ESE_IRQ", /* GPIO_24 */
"NC", /* GPIO_25 */
"WEBCAM1_STANDBY", /* GPIO_26 */
"NC", /* GPIO_27 */
"NC", /* GPIO_28 */
"OLED_ERR_FG", /* GPIO_29 */
"CAM1_RST_N", /* GPIO_30 */
"HIFI_SW_MUTE", /* GPIO_31 */
"NC", /* GPIO_32 */
"NC", /* GPIO_33 */
"FP_DOME_SW", /* GPIO_34 */
"PCI_E0_RST_N", /* GPIO_35 */
"PCI_E0_CLKREQ_N", /* GPIO_36 */
"PCI_E0_WAKE", /* GPIO_37 */
"OV_PWDN", /* GPIO_38 */
"NC", /* GPIO_39 */
"VDDR_1P6_EN", /* GPIO_40 */
"QCA_UART_TXD", /* GPIO_41 */
"QCA_UART_RXD", /* GPIO_42 */
"QCA_UART_CTS", /* GPIO_43 */
"QCA_UART_RTS", /* GPIO_44 */
"MAWC_UART_TX", /* GPIO_45 */
"MAWC_UART_RX", /* GPIO_46 */
"NC", /* GPIO_47 */
"NC", /* GPIO_48 */
"AUDIO_SWITCH_EN", /* GPIO_49 */
"FP_SPI_RST", /* GPIO_50 */
"TYPEC_I2C_SDA", /* GPIO_51 */
"TYPEC_I2C_SCL", /* GPIO_52 */
"CODEC_INT2_N", /* GPIO_53 */
"CODEC_INT1_N", /* GPIO_54 */
"APPS_I2C7_SDA", /* GPIO_55 */
"APPS_I2C7_SCL", /* GPIO_56 */
"FORCE_USB_BOOT", /* GPIO_57 */
"SPKR_I2S_BCK", /* GPIO_58 */
"SPKR_I2S_WS", /* GPIO_59 */
"SPKR_I2S_DOUT", /* GPIO_60 */
"SPKR_I2S_DIN", /* GPIO_61 */
"ESE_RSTN", /* GPIO_62 */
"TYPEC_INT", /* GPIO_63 */
"CODEC_RESET_N", /* GPIO_64 */
"PCM_CLK", /* GPIO_65 */
"PCM_SYNC", /* GPIO_66 */
"PCM_DIN", /* GPIO_67 */
"PCM_DOUT", /* GPIO_68 */
"CDC_44K1_CLK", /* GPIO_69 */
"SLIMBUS_CLK", /* GPIO_70 */
"SLIMBUS_DATA0", /* GPIO_71 */
"SLIMBUS_DATA1", /* GPIO_72 */
"LDO_5V_IN_EN", /* GPIO_73 */
"NC", /* GPIO_74 */
"TSP_RST_N", /* GPIO_75 */
"NC", /* GPIO_76 */
"TOUCHKEY_INT", /* GPIO_77 */
"SPKR_I2S_MCLK", /* GPIO_78 */
"SPKR_PA_INT", /* GPIO_79 */
"SENSOR_RESET_N", /* GPIO_80 */
"FP_SPI_MOSI", /* GPIO_81 */
"FP_SPI_MISO", /* GPIO_82 */
"FP_SPI_CS_N", /* GPIO_83 */
"FP_SPI_CLK", /* GPIO_84 */
"HIFI_SD", /* GPIO_85 */
"CAM_VDD_1P05_EN", /* GPIO_86 */
"MSM_TS_I2C_SDA", /* GPIO_87 */
"MSM_TS_I2C_SCL", /* GPIO_88 */
"NC", /* GPIO_89 */
"ESE_SPI_CS_N", /* GPIO_90 */
"NC", /* GPIO_91 */
"NC", /* GPIO_92 */
"NC", /* GPIO_93 */
"NC", /* GPIO_94 */
"NC", /* GPIO_95 */
"NC", /* GPIO_96 */
"GRFC_0", /* GPIO_97 */
"GRFC_1", /* GPIO_98 */
"NC", /* GPIO_99 */
"GRFC_3", /* GPIO_100 */
"GRFC_4", /* GPIO_101 */
"NC", /* GPIO_102 */
"NC", /* GPIO_103 */
"GRFC_7", /* GPIO_104 */
"UIM2_DATA", /* GPIO_105 */
"UIM2_CLK", /* GPIO_106 */
"UIM2_RESET", /* GPIO_107 */
"UIM2_PRESENT", /* GPIO_108 */
"UIM1_DATA", /* GPIO_109 */
"UIM1_CLK", /* GPIO_110 */
"UIM1_RESET", /* GPIO_111 */
"UIM1_PRESENT", /* GPIO_112 */
"UIM_BATT_ALARM", /* GPIO_113 */
"GRFC_8", /* GPIO_114 */
"GRFC_9", /* GPIO_115 */
"TX_GTR_THRES", /* GPIO_116 */
"ACC_INT", /* GPIO_117 */
"GYRO_INT", /* GPIO_118 */
"COMPASS_INT", /* GPIO_119 */
"PROXIMITY_INT_N", /* GPIO_120 */
"FP_IRQ", /* GPIO_121 */
"TSP_TA", /* GPIO_122 */
"HALL_INTR2", /* GPIO_123 */
"HALL_INTR1", /* GPIO_124 */
"TS_INT_N", /* GPIO_125 */
"NC", /* GPIO_126 */
"GRFC_11", /* GPIO_127 */
"HIFI_PWR_EN", /* GPIO_128 */
"EXT_GPS_LNA_EN", /* GPIO_129 */
"NC", /* GPIO_130 */
"NC", /* GPIO_131 */
"NC", /* GPIO_132 */
"GRFC_14", /* GPIO_133 */
"GSM_TX2_PHASE_D", /* GPIO_134 */
"HIFI_SW_SEL", /* GPIO_135 */
"GRFC_15", /* GPIO_136 */
"RFFE3_DATA", /* GPIO_137 */
"RFFE3_CLK", /* GPIO_138 */
"NC", /* GPIO_139 */
"NC", /* GPIO_140 */
"RFFE5_DATA", /* GPIO_141 */
"RFFE5_CLK", /* GPIO_142 */
"NC", /* GPIO_143 */
"COEX_UART_TX", /* GPIO_144 */
"COEX_UART_RX", /* GPIO_145 */
"RFFE2_DATA", /* GPIO_146 */
"RFFE2_CLK", /* GPIO_147 */
"RFFE1_DATA", /* GPIO_148 */
"RFFE1_CLK"; /* GPIO_149 */
touchscreen_default: touchscreen_default {
pins = "gpio75", "gpio125";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
touchscreen_sleep: touchscreen_sleep {
pins = "gpio75", "gpio125";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7