Skip to content

L
linux
Commit 4670d610 authored by Rob Herring's avatar Rob Herring Committed by Bjorn Helgaas
Browse files
Options

PCI: Move OF-related PCI functions into PCI core 

Following what has been done for other subsystems, move the remaining PCI
related code out of drivers/of/ and into drivers/pci/of.c

With this, we can kill a few kconfig symbols.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
[bhelgaas: minor whitespace, comment cleanups]
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>
parent 1291a0d5
Show whitespace changes
Inline Side-by-side
Showing with 517 additions and 542 deletions
arch/arm/mach-mvebu/Kconfig
View file @ 4670d610
...@@ -10,7 +10,6 @@ menuconfig ARCH_MVEBU ...@@ -10,7 +10,6 @@ menuconfig ARCH_MVEBU
select ZONE_DMA if ARM_LPAE select ZONE_DMA if ARM_LPAE
select GPIOLIB select GPIOLIB
select PCI_QUIRKS if PCI select PCI_QUIRKS if PCI
select OF_ADDRESS_PCI
if ARCH_MVEBU if ARCH_MVEBU
......
drivers/of/Kconfig
View file @ 4670d610
...@@ -62,10 +62,6 @@ config OF_DYNAMIC ...@@ -62,10 +62,6 @@ config OF_DYNAMIC
config OF_ADDRESS config OF_ADDRESS
def_bool y def_bool y
depends on !SPARC && HAS_IOMEM depends on !SPARC && HAS_IOMEM
select OF_ADDRESS_PCI if PCI
config OF_ADDRESS_PCI
bool
config OF_IRQ config OF_IRQ
def_bool y def_bool y
...@@ -82,18 +78,6 @@ config OF_MDIO ...@@ -82,18 +78,6 @@ config OF_MDIO
help help
OpenFirmware MDIO bus (Ethernet PHY) accessors OpenFirmware MDIO bus (Ethernet PHY) accessors
config OF_PCI
def_tristate PCI
depends on PCI
help
OpenFirmware PCI bus accessors
config OF_PCI_IRQ
def_tristate PCI
depends on OF_PCI && OF_IRQ
help
OpenFirmware PCI IRQ routing helpers
config OF_RESERVED_MEM config OF_RESERVED_MEM
depends on OF_EARLY_FLATTREE depends on OF_EARLY_FLATTREE
bool bool
......
drivers/of/Makefile
View file @ 4670d610
...@@ -10,8 +10,6 @@ obj-$(CONFIG_OF_IRQ) += irq.o ...@@ -10,8 +10,6 @@ obj-$(CONFIG_OF_IRQ) += irq.o
obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_UNITTEST) += unittest.o obj-$(CONFIG_OF_UNITTEST) += unittest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
obj-$(CONFIG_OF_RESOLVE) += resolver.o obj-$(CONFIG_OF_RESOLVE) += resolver.o
obj-$(CONFIG_OF_OVERLAY) += overlay.o obj-$(CONFIG_OF_OVERLAY) += overlay.o
......
drivers/of/address.c
View file @ 4670d610
...@@ -96,7 +96,7 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr) ...@@ -96,7 +96,7 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
return IORESOURCE_MEM; return IORESOURCE_MEM;
} }
#ifdef CONFIG_OF_ADDRESS_PCI #ifdef CONFIG_PCI
/* /*
* PCI bus specific translator * PCI bus specific translator
*/ */
...@@ -171,9 +171,7 @@ static int of_bus_pci_translate(__be32 *addr, u64 offset, int na) ...@@ -171,9 +171,7 @@ static int of_bus_pci_translate(__be32 *addr, u64 offset, int na)
{ {
return of_bus_default_translate(addr + 1, offset, na - 1); return of_bus_default_translate(addr + 1, offset, na - 1);
} }
#endif /* CONFIG_OF_ADDRESS_PCI */
#ifdef CONFIG_PCI
const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
unsigned int *flags) unsigned int *flags)
{ {
...@@ -426,7 +424,7 @@ static unsigned int of_bus_isa_get_flags(const __be32 *addr) ...@@ -426,7 +424,7 @@ static unsigned int of_bus_isa_get_flags(const __be32 *addr)
*/ */
static struct of_bus of_busses[] = { static struct of_bus of_busses[] = {
#ifdef CONFIG_OF_ADDRESS_PCI #ifdef CONFIG_PCI
/* PCI */ /* PCI */
{ {
.name = "pci", .name = "pci",
...@@ -437,7 +435,7 @@ static struct of_bus of_busses[] = { ...@@ -437,7 +435,7 @@ static struct of_bus of_busses[] = {
.translate = of_bus_pci_translate, .translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags, .get_flags = of_bus_pci_get_flags,
}, },
#endif /* CONFIG_OF_ADDRESS_PCI */ #endif /* CONFIG_PCI */
/* ISA */ /* ISA */
{ {
.name = "isa", .name = "isa",
......
drivers/of/of_pci.c deleted 100644 → 0
View file @ 1291a0d5
#define pr_fmt(fmt) "OF: PCI: " fmt
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
static inline int __of_pci_pci_compare(struct device_node *node,
unsigned int data)
{
int devfn;
devfn = of_pci_get_devfn(node);
if (devfn < 0)
return 0;
return devfn == data;
}
struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn)
{
struct device_node *node, *node2;
for_each_child_of_node(parent, node) {
if (__of_pci_pci_compare(node, devfn))
return node;
/*
* Some OFs create a parent node "multifunc-device" as
* a fake root for all functions of a multi-function
* device we go down them as well.
*/
if (!strcmp(node->name, "multifunc-device")) {
for_each_child_of_node(node, node2) {
if (__of_pci_pci_compare(node2, devfn)) {
of_node_put(node);
return node2;
}
}
}
}
return NULL;
}
EXPORT_SYMBOL_GPL(of_pci_find_child_device);
/**
* of_pci_get_devfn() - Get device and function numbers for a device node
* @np: device node
*
* Parses a standard 5-cell PCI resource and returns an 8-bit value that can
* be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device
* and function numbers respectively. On error a negative error code is
* returned.
*/
int of_pci_get_devfn(struct device_node *np)
{
u32 reg[5];
int error;
error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
if (error)
return error;
return (reg[0] >> 8) & 0xff;
}
EXPORT_SYMBOL_GPL(of_pci_get_devfn);
/**
* of_pci_parse_bus_range() - parse the bus-range property of a PCI device
* @node: device node
* @res: address to a struct resource to return the bus-range
*
* Returns 0 on success or a negative error-code on failure.
*/
int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
{
u32 bus_range[2];
int error;
error = of_property_read_u32_array(node, "bus-range", bus_range,
ARRAY_SIZE(bus_range));
if (error)
return error;
res->name = node->name;
res->start = bus_range[0];
res->end = bus_range[1];
res->flags = IORESOURCE_BUS;
return 0;
}
EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
/**
* This function will try to obtain the host bridge domain number by
* finding a property called "linux,pci-domain" of the given device node.
*
* @node: device tree node with the domain information
*
* Returns the associated domain number from DT in the range [0-0xffff], or
* a negative value if the required property is not found.
*/
int of_get_pci_domain_nr(struct device_node *node)
{
u32 domain;
int error;
error = of_property_read_u32(node, "linux,pci-domain", &domain);
if (error)
return error;
return (u16)domain;
}
EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
/**
* This function will try to find the limitation of link speed by finding
* a property called "max-link-speed" of the given device node.
*
* @node: device tree node with the max link speed information
*
* Returns the associated max link speed from DT, or a negative value if the
* required property is not found or is invalid.
*/
int of_pci_get_max_link_speed(struct device_node *node)
{
u32 max_link_speed;
if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
max_link_speed > 4)
return -EINVAL;
return max_link_speed;
}
EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
/**
* of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
* is present and valid
*/
void of_pci_check_probe_only(void)
{
u32 val;
int ret;
ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val);
if (ret) {
if (ret == -ENODATA || ret == -EOVERFLOW)
pr_warn("linux,pci-probe-only without valid value, ignoring\n");
return;
}
if (val)
pci_add_flags(PCI_PROBE_ONLY);
else
pci_clear_flags(PCI_PROBE_ONLY);
pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
}
EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
#if defined(CONFIG_OF_ADDRESS)
/**
* of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
* @dev: device node of the host bridge having the range property
* @busno: bus number associated with the bridge root bus
* @bus_max: maximum number of buses for this bridge
* @resources: list where the range of resources will be added after DT parsing
* @io_base: pointer to a variable that will contain on return the physical
* address for the start of the I/O range. Can be NULL if the caller doesn't
* expect IO ranges to be present in the device tree.
*
* It is the caller's job to free the @resources list.
*
* This function will parse the "ranges" property of a PCI host bridge device
* node and setup the resource mapping based on its content. It is expected
* that the property conforms with the Power ePAPR document.
*
* It returns zero if the range parsing has been successful or a standard error
* value if it failed.
*/
int of_pci_get_host_bridge_resources(struct device_node *dev,
unsigned char busno, unsigned char bus_max,
struct list_head *resources, resource_size_t *io_base)
{
struct resource_entry *window;
struct resource *res;
struct resource *bus_range;
struct of_pci_range range;
struct of_pci_range_parser parser;
char range_type[4];
int err;
if (io_base)
*io_base = (resource_size_t)OF_BAD_ADDR;
bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
if (!bus_range)
return -ENOMEM;
pr_info("host bridge %pOF ranges:\n", dev);
err = of_pci_parse_bus_range(dev, bus_range);
if (err) {
bus_range->start = busno;
bus_range->end = bus_max;
bus_range->flags = IORESOURCE_BUS;
pr_info(" No bus range found for %pOF, using %pR\n",
dev, bus_range);
} else {
if (bus_range->end > bus_range->start + bus_max)
bus_range->end = bus_range->start + bus_max;
}
pci_add_resource(resources, bus_range);
/* Check for ranges property */
err = of_pci_range_parser_init(&parser, dev);
if (err)
goto parse_failed;
pr_debug("Parsing ranges property...\n");
for_each_of_pci_range(&parser, &range) {
/* Read next ranges element */
if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
snprintf(range_type, 4, " IO");
else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
snprintf(range_type, 4, "MEM");
else
snprintf(range_type, 4, "err");
pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type,
range.cpu_addr, range.cpu_addr + range.size - 1,
range.pci_addr);
/*
* If we failed translation or got a zero-sized region
* then skip this range
*/
if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res) {
err = -ENOMEM;
goto parse_failed;
}
err = of_pci_range_to_resource(&range, dev, res);
if (err) {
kfree(res);
continue;
}
if (resource_type(res) == IORESOURCE_IO) {
if (!io_base) {
pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
dev);
err = -EINVAL;
goto conversion_failed;
}
if (*io_base != (resource_size_t)OF_BAD_ADDR)
pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n",
dev);
*io_base = range.cpu_addr;
}
pci_add_resource_offset(resources, res, res->start - range.pci_addr);
}
return 0;
conversion_failed:
kfree(res);
parse_failed:
resource_list_for_each_entry(window, resources)
kfree(window->res);
pci_free_resource_list(resources);
return err;
}
EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
#endif /* CONFIG_OF_ADDRESS */
/**
* of_pci_map_rid - Translate a requester ID through a downstream mapping.
* @np: root complex device node.
* @rid: PCI requester ID to map.
* @map_name: property name of the map to use.
* @map_mask_name: optional property name of the mask to use.
* @target: optional pointer to a target device node.
* @id_out: optional pointer to receive the translated ID.
*
* Given a PCI requester ID, look up the appropriate implementation-defined
* platform ID and/or the target device which receives transactions on that
* ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
* @id_out may be NULL if only the other is required. If @target points to
* a non-NULL device node pointer, only entries targeting that node will be
* matched; if it points to a NULL value, it will receive the device node of
* the first matching target phandle, with a reference held.
*
* Return: 0 on success or a standard error code on failure.
*/
int of_pci_map_rid(struct device_node *np, u32 rid,
const char *map_name, const char *map_mask_name,
struct device_node **target, u32 *id_out)
{
u32 map_mask, masked_rid;
int map_len;
const __be32 *map = NULL;
if (!np || !map_name || (!target && !id_out))
return -EINVAL;
map = of_get_property(np, map_name, &map_len);
if (!map) {
if (target)
return -ENODEV;
/* Otherwise, no map implies no translation */
*id_out = rid;
return 0;
}
if (!map_len || map_len % (4 * sizeof(*map))) {
pr_err("%pOF: Error: Bad %s length: %d\n", np,
map_name, map_len);
return -EINVAL;
}
/* The default is to select all bits. */
map_mask = 0xffffffff;
/*
* Can be overridden by "{iommu,msi}-map-mask" property.
* If of_property_read_u32() fails, the default is used.
*/
if (map_mask_name)
of_property_read_u32(np, map_mask_name, &map_mask);
masked_rid = map_mask & rid;
for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
struct device_node *phandle_node;
u32 rid_base = be32_to_cpup(map + 0);
u32 phandle = be32_to_cpup(map + 1);
u32 out_base = be32_to_cpup(map + 2);
u32 rid_len = be32_to_cpup(map + 3);
if (rid_base & ~map_mask) {
pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
np, map_name, map_name,
map_mask, rid_base);
return -EFAULT;
}
if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
continue;
phandle_node = of_find_node_by_phandle(phandle);
if (!phandle_node)
return -ENODEV;
if (target) {
if (*target)
of_node_put(phandle_node);
else
*target = phandle_node;
if (*target != phandle_node)
continue;
}
if (id_out)
*id_out = masked_rid - rid_base + out_base;
pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
np, map_name, map_mask, rid_base, out_base,
rid_len, rid, masked_rid - rid_base + out_base);
return 0;
}
pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
np, map_name, rid, target && *target ? *target : NULL);
return -EFAULT;
}
drivers/of/of_pci_irq.c deleted 100644 → 0
View file @ 1291a0d5
#include <linux/kernel.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/export.h>
/**
* of_irq_parse_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
*
* This function resolves the PCI interrupt for a given PCI device. If a
* device-node exists for a given pci_dev, it will use normal OF tree
* walking. If not, it will implement standard swizzling and walk up the
* PCI tree until an device-node is found, at which point it will finish
* resolving using the OF tree walking.
*/
int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
{
struct device_node *dn, *ppnode;
struct pci_dev *ppdev;
__be32 laddr[3];
u8 pin;
int rc;
/* Check if we have a device node, if yes, fallback to standard
* device tree parsing
*/
dn = pci_device_to_OF_node(pdev);
if (dn) {
rc = of_irq_parse_one(dn, 0, out_irq);
if (!rc)
return rc;
}
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
* for PCI. If you do different, then don't use that routine.
*/
rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
if (rc != 0)
goto err;
/* No pin, exit with no error message. */
if (pin == 0)
return -ENODEV;
/* Now we walk up the PCI tree */
for (;;) {
/* Get the pci_dev of our parent */
ppdev = pdev->bus->self;
/* Ouch, it's a host bridge... */
if (ppdev == NULL) {
ppnode = pci_bus_to_OF_node(pdev->bus);
/* No node for host bridge ? give up */
if (ppnode == NULL) {
rc = -EINVAL;
goto err;
}
} else {
/* We found a P2P bridge, check if it has a node */
ppnode = pci_device_to_OF_node(ppdev);
}
/* Ok, we have found a parent with a device-node, hand over to
* the OF parsing code.
* We build a unit address from the linux device to be used for
* resolution. Note that we use the linux bus number which may
* not match your firmware bus numbering.
* Fortunately, in most cases, interrupt-map-mask doesn't
* include the bus number as part of the matching.
* You should still be careful about that though if you intend
* to rely on this function (you ship a firmware that doesn't
* create device nodes for all PCI devices).
*/
if (ppnode)
break;
/* We can only get here if we hit a P2P bridge with no node,
* let's do standard swizzling and try again
*/
pin = pci_swizzle_interrupt_pin(pdev, pin);
pdev = ppdev;
}
out_irq->np = ppnode;
out_irq->args_count = 1;
out_irq->args[0] = pin;
laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
laddr[1] = laddr[2] = cpu_to_be32(0);
rc = of_irq_parse_raw(laddr, out_irq);
if (rc)
goto err;
return 0;
err:
if (rc == -ENOENT) {
dev_warn(&pdev->dev,
"%s: no interrupt-map found, INTx interrupts not available\n",
__func__);
pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n",
__func__);
} else {
dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc);
}
return rc;
}
EXPORT_SYMBOL_GPL(of_irq_parse_pci);
/**
* of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq
* @dev: The pci device needing an irq
* @slot: PCI slot number; passed when used as map_irq callback. Unused
* @pin: PCI irq pin number; passed when used as map_irq callback. Unused
*
* @slot and @pin are unused, but included in the function so that this
* function can be used directly as the map_irq callback to
* pci_assign_irq() and struct pci_host_bridge.map_irq pointer
*/
int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct of_phandle_args oirq;
int ret;
ret = of_irq_parse_pci(dev, &oirq);
if (ret)
return 0; /* Proper return code 0 == NO_IRQ */
return irq_create_of_mapping(&oirq);
}
EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
drivers/pci/of.c
View file @ 4670d610
...@@ -8,12 +8,14 @@ ...@@ -8,12 +8,14 @@
* as published by the Free Software Foundation; either version * as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
*/ */
#define pr_fmt(fmt) "PCI: OF: " fmt
#include <linux/irqdomain.h> #include <linux/irqdomain.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_irq.h> #include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_pci.h> #include <linux/of_pci.h>
#include "pci.h" #include "pci.h"
...@@ -51,8 +53,9 @@ struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus) ...@@ -51,8 +53,9 @@ struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus)
if (WARN_ON(bus->self || bus->parent)) if (WARN_ON(bus->self || bus->parent))
return NULL; return NULL;
/* Look for a node pointer in either the intermediary device we /*
* create above the root bus or it's own parent. Normally only * Look for a node pointer in either the intermediary device we
* create above the root bus or its own parent. Normally only
* the later is populated. * the later is populated.
*/ */
if (bus->bridge->of_node) if (bus->bridge->of_node)
...@@ -88,3 +91,511 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus) ...@@ -88,3 +91,511 @@ struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus)
return NULL; return NULL;
#endif #endif
} }
static inline int __of_pci_pci_compare(struct device_node *node,
unsigned int data)
{
int devfn;
devfn = of_pci_get_devfn(node);
if (devfn < 0)
return 0;
return devfn == data;
}
struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn)
{
struct device_node *node, *node2;
for_each_child_of_node(parent, node) {
if (__of_pci_pci_compare(node, devfn))
return node;
/*
* Some OFs create a parent node "multifunc-device" as
* a fake root for all functions of a multi-function
* device we go down them as well.
*/
if (!strcmp(node->name, "multifunc-device")) {
for_each_child_of_node(node, node2) {
if (__of_pci_pci_compare(node2, devfn)) {
of_node_put(node);
return node2;
}
}
}
}
return NULL;
}
EXPORT_SYMBOL_GPL(of_pci_find_child_device);
/**
* of_pci_get_devfn() - Get device and function numbers for a device node
* @np: device node
*
* Parses a standard 5-cell PCI resource and returns an 8-bit value that can
* be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device
* and function numbers respectively. On error a negative error code is
* returned.
*/
int of_pci_get_devfn(struct device_node *np)
{
u32 reg[5];
int error;
error = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
if (error)
return error;
return (reg[0] >> 8) & 0xff;
}
EXPORT_SYMBOL_GPL(of_pci_get_devfn);
/**
* of_pci_parse_bus_range() - parse the bus-range property of a PCI device
* @node: device node
* @res: address to a struct resource to return the bus-range
*
* Returns 0 on success or a negative error-code on failure.
*/
int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
{
u32 bus_range[2];
int error;
error = of_property_read_u32_array(node, "bus-range", bus_range,
ARRAY_SIZE(bus_range));
if (error)
return error;
res->name = node->name;
res->start = bus_range[0];
res->end = bus_range[1];
res->flags = IORESOURCE_BUS;
return 0;
}
EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
/**
* This function will try to obtain the host bridge domain number by
* finding a property called "linux,pci-domain" of the given device node.
*
* @node: device tree node with the domain information
*
* Returns the associated domain number from DT in the range [0-0xffff], or
* a negative value if the required property is not found.
*/
int of_get_pci_domain_nr(struct device_node *node)
{
u32 domain;
int error;
error = of_property_read_u32(node, "linux,pci-domain", &domain);
if (error)
return error;
return (u16)domain;
}
EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
/**
* This function will try to find the limitation of link speed by finding
* a property called "max-link-speed" of the given device node.
*
* @node: device tree node with the max link speed information
*
* Returns the associated max link speed from DT, or a negative value if the
* required property is not found or is invalid.
*/
int of_pci_get_max_link_speed(struct device_node *node)
{
u32 max_link_speed;
if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
max_link_speed > 4)
return -EINVAL;
return max_link_speed;
}
EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
/**
* of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
* is present and valid
*/
void of_pci_check_probe_only(void)
{
u32 val;
int ret;
ret = of_property_read_u32(of_chosen, "linux,pci-probe-only", &val);
if (ret) {
if (ret == -ENODATA || ret == -EOVERFLOW)
pr_warn("linux,pci-probe-only without valid value, ignoring\n");
return;
}
if (val)
pci_add_flags(PCI_PROBE_ONLY);
else
pci_clear_flags(PCI_PROBE_ONLY);
pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
}
EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
#if defined(CONFIG_OF_ADDRESS)
/**
* of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
* @dev: device node of the host bridge having the range property
* @busno: bus number associated with the bridge root bus
* @bus_max: maximum number of buses for this bridge
* @resources: list where the range of resources will be added after DT parsing
* @io_base: pointer to a variable that will contain on return the physical
* address for the start of the I/O range. Can be NULL if the caller doesn't
* expect I/O ranges to be present in the device tree.
*
* It is the caller's job to free the @resources list.
*
* This function will parse the "ranges" property of a PCI host bridge device
* node and setup the resource mapping based on its content. It is expected
* that the property conforms with the Power ePAPR document.
*
* It returns zero if the range parsing has been successful or a standard error
* value if it failed.
*/
int of_pci_get_host_bridge_resources(struct device_node *dev,
unsigned char busno, unsigned char bus_max,
struct list_head *resources, resource_size_t *io_base)
{
struct resource_entry *window;
struct resource *res;
struct resource *bus_range;
struct of_pci_range range;
struct of_pci_range_parser parser;
char range_type[4];
int err;
if (io_base)
*io_base = (resource_size_t)OF_BAD_ADDR;
bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
if (!bus_range)
return -ENOMEM;
pr_info("host bridge %pOF ranges:\n", dev);
err = of_pci_parse_bus_range(dev, bus_range);
if (err) {
bus_range->start = busno;
bus_range->end = bus_max;
bus_range->flags = IORESOURCE_BUS;
pr_info(" No bus range found for %pOF, using %pR\n",
dev, bus_range);
} else {
if (bus_range->end > bus_range->start + bus_max)
bus_range->end = bus_range->start + bus_max;
}
pci_add_resource(resources, bus_range);
/* Check for ranges property */
err = of_pci_range_parser_init(&parser, dev);
if (err)
goto parse_failed;
pr_debug("Parsing ranges property...\n");
for_each_of_pci_range(&parser, &range) {
/* Read next ranges element */
if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
snprintf(range_type, 4, " IO");
else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
snprintf(range_type, 4, "MEM");
else
snprintf(range_type, 4, "err");
pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type,
range.cpu_addr, range.cpu_addr + range.size - 1,
range.pci_addr);
/*
* If we failed translation or got a zero-sized region
* then skip this range
*/
if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
continue;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res) {
err = -ENOMEM;
goto parse_failed;
}
err = of_pci_range_to_resource(&range, dev, res);
if (err) {
kfree(res);
continue;
}
if (resource_type(res) == IORESOURCE_IO) {
if (!io_base) {
pr_err("I/O range found for %pOF. Please provide an io_base pointer to save CPU base address\n",
dev);
err = -EINVAL;
goto conversion_failed;
}
if (*io_base != (resource_size_t)OF_BAD_ADDR)
pr_warn("More than one I/O resource converted for %pOF. CPU base address for old range lost!\n",
dev);
*io_base = range.cpu_addr;
}
pci_add_resource_offset(resources, res, res->start - range.pci_addr);
}
return 0;
conversion_failed:
kfree(res);
parse_failed:
resource_list_for_each_entry(window, resources)
kfree(window->res);
pci_free_resource_list(resources);
return err;
}
EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
#endif /* CONFIG_OF_ADDRESS */
/**
* of_pci_map_rid - Translate a requester ID through a downstream mapping.
* @np: root complex device node.
* @rid: PCI requester ID to map.
* @map_name: property name of the map to use.
* @map_mask_name: optional property name of the mask to use.
* @target: optional pointer to a target device node.
* @id_out: optional pointer to receive the translated ID.
*
* Given a PCI requester ID, look up the appropriate implementation-defined
* platform ID and/or the target device which receives transactions on that
* ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
* @id_out may be NULL if only the other is required. If @target points to
* a non-NULL device node pointer, only entries targeting that node will be
* matched; if it points to a NULL value, it will receive the device node of
* the first matching target phandle, with a reference held.
*
* Return: 0 on success or a standard error code on failure.
*/
int of_pci_map_rid(struct device_node *np, u32 rid,
const char *map_name, const char *map_mask_name,
struct device_node **target, u32 *id_out)
{
u32 map_mask, masked_rid;
int map_len;
const __be32 *map = NULL;
if (!np || !map_name || (!target && !id_out))
return -EINVAL;
map = of_get_property(np, map_name, &map_len);
if (!map) {
if (target)
return -ENODEV;
/* Otherwise, no map implies no translation */
*id_out = rid;
return 0;
}
if (!map_len || map_len % (4 * sizeof(*map))) {
pr_err("%pOF: Error: Bad %s length: %d\n", np,
map_name, map_len);
return -EINVAL;
}
/* The default is to select all bits. */
map_mask = 0xffffffff;
/*
* Can be overridden by "{iommu,msi}-map-mask" property.
* If of_property_read_u32() fails, the default is used.
*/
if (map_mask_name)
of_property_read_u32(np, map_mask_name, &map_mask);
masked_rid = map_mask & rid;
for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
struct device_node *phandle_node;
u32 rid_base = be32_to_cpup(map + 0);
u32 phandle = be32_to_cpup(map + 1);
u32 out_base = be32_to_cpup(map + 2);
u32 rid_len = be32_to_cpup(map + 3);
if (rid_base & ~map_mask) {
pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
np, map_name, map_name,
map_mask, rid_base);
return -EFAULT;
}
if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
continue;
phandle_node = of_find_node_by_phandle(phandle);
if (!phandle_node)
return -ENODEV;
if (target) {
if (*target)
of_node_put(phandle_node);
else
*target = phandle_node;
if (*target != phandle_node)
continue;
}
if (id_out)
*id_out = masked_rid - rid_base + out_base;
pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
np, map_name, map_mask, rid_base, out_base,
rid_len, rid, masked_rid - rid_base + out_base);
return 0;
}
pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
np, map_name, rid, target && *target ? *target : NULL);
return -EFAULT;
}
#if IS_ENABLED(CONFIG_OF_IRQ)
/**
* of_irq_parse_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
*
* This function resolves the PCI interrupt for a given PCI device. If a
* device-node exists for a given pci_dev, it will use normal OF tree
* walking. If not, it will implement standard swizzling and walk up the
* PCI tree until an device-node is found, at which point it will finish
* resolving using the OF tree walking.
*/
int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
{
struct device_node *dn, *ppnode;
struct pci_dev *ppdev;
__be32 laddr[3];
u8 pin;
int rc;
/*
* Check if we have a device node, if yes, fallback to standard
* device tree parsing
*/
dn = pci_device_to_OF_node(pdev);
if (dn) {
rc = of_irq_parse_one(dn, 0, out_irq);
if (!rc)
return rc;
}
/*
* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
* for PCI. If you do different, then don't use that routine.
*/
rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
if (rc != 0)
goto err;
/* No pin, exit with no error message. */
if (pin == 0)
return -ENODEV;
/* Now we walk up the PCI tree */
for (;;) {
/* Get the pci_dev of our parent */
ppdev = pdev->bus->self;
/* Ouch, it's a host bridge... */
if (ppdev == NULL) {
ppnode = pci_bus_to_OF_node(pdev->bus);
/* No node for host bridge ? give up */
if (ppnode == NULL) {
rc = -EINVAL;
goto err;
}
} else {
/* We found a P2P bridge, check if it has a node */
ppnode = pci_device_to_OF_node(ppdev);
}
/*
* Ok, we have found a parent with a device-node, hand over to
* the OF parsing code.
* We build a unit address from the linux device to be used for
* resolution. Note that we use the linux bus number which may
* not match your firmware bus numbering.
* Fortunately, in most cases, interrupt-map-mask doesn't
* include the bus number as part of the matching.
* You should still be careful about that though if you intend
* to rely on this function (you ship a firmware that doesn't
* create device nodes for all PCI devices).
*/
if (ppnode)
break;
/*
* We can only get here if we hit a P2P bridge with no node;
* let's do standard swizzling and try again
*/
pin = pci_swizzle_interrupt_pin(pdev, pin);
pdev = ppdev;
}
out_irq->np = ppnode;
out_irq->args_count = 1;
out_irq->args[0] = pin;
laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
laddr[1] = laddr[2] = cpu_to_be32(0);
rc = of_irq_parse_raw(laddr, out_irq);
if (rc)
goto err;
return 0;
err:
if (rc == -ENOENT) {
dev_warn(&pdev->dev,
"%s: no interrupt-map found, INTx interrupts not available\n",
__func__);
pr_warn_once("%s: possibly some PCI slots don't have level triggered interrupts capability\n",
__func__);
} else {
dev_err(&pdev->dev, "%s: failed with rc=%d\n", __func__, rc);
}
return rc;
}
EXPORT_SYMBOL_GPL(of_irq_parse_pci);
/**
* of_irq_parse_and_map_pci() - Decode a PCI IRQ from the device tree and map to a VIRQ
* @dev: The PCI device needing an IRQ
* @slot: PCI slot number; passed when used as map_irq callback. Unused
* @pin: PCI IRQ pin number; passed when used as map_irq callback. Unused
*
* @slot and @pin are unused, but included in the function so that this
* function can be used directly as the map_irq callback to
* pci_assign_irq() and struct pci_host_bridge.map_irq pointer
*/
int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct of_phandle_args oirq;
int ret;
ret = of_irq_parse_pci(dev, &oirq);
if (ret)
return 0; /* Proper return code 0 == NO_IRQ */
return irq_create_of_mapping(&oirq);
}
EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci);
#endif /* CONFIG_OF_IRQ */
include/linux/of_pci.h
View file @ 4670d610
...@@ -9,7 +9,7 @@ struct pci_dev; ...@@ -9,7 +9,7 @@ struct pci_dev;
struct of_phandle_args; struct of_phandle_args;
struct device_node; struct device_node;
#ifdef CONFIG_OF_PCI #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_PCI)
int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq); int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq);
struct device_node *of_pci_find_child_device(struct device_node *parent, struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn); unsigned int devfn);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7