Commit 4690bdc7 authored by Paul Mundt's avatar Paul Mundt

sh: Consolidate CPU features in Kconfig.cpu.

Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 114f1329
menu "Processor features"
choice
prompt "Endianess selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big
endian byte order. These modes require different kernels.
config CPU_LITTLE_ENDIAN
bool "Little Endian"
config CPU_BIG_ENDIAN
bool "Big Endian"
endchoice
config SH_FPU
bool "FPU support"
depends on CPU_HAS_FPU
default y
help
Selecting this option will enable support for SH processors that
have FPU units (ie, SH77xx).
This option must be set in order to enable the FPU.
config SH_FPU_EMU
bool "FPU emulation support"
depends on !SH_FPU && EXPERIMENTAL
default n
help
Selecting this option will enable support for software FPU emulation.
Most SH-3 users will want to say Y here, whereas most SH-4 users will
want to say N.
config SH_DSP
bool "DSP support"
depends on CPU_HAS_DSP
default y
help
Selecting this option will enable support for SH processors that
have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
This option must be set in order to enable the DSP.
config SH_ADC
bool "ADC support"
depends on CPU_SH3
default y
help
Selecting this option will allow the Linux kernel to use SH3 on-chip
ADC module.
If unsure, say N.
config SH_STORE_QUEUES
bool "Support for Store Queues"
depends on CPU_SH4
help
Selecting this option will enable an in-kernel API for manipulating
the store queues integrated in the SH-4 processors.
config SPECULATIVE_EXECUTION
bool "Speculative subroutine return"
depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
help
This enables support for a speculative instruction fetch for
subroutine return. There are various pitfalls associated with
this, as outlined in the SH7780 hardware manual.
If unsure, say N.
config CPU_HAS_INTEVT
bool
config CPU_HAS_MASKREG_IRQ
bool
config CPU_HAS_IPR_IRQ
bool
config CPU_HAS_SR_RB
bool
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
accomplishing what is taken care of by the banked registers.
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
config CPU_HAS_PTEA
bool
config CPU_HAS_DSP
bool
config CPU_HAS_FPU
bool
endmenu
...@@ -291,109 +291,7 @@ config CPU_SUBTYPE_SH7722 ...@@ -291,109 +291,7 @@ config CPU_SUBTYPE_SH7722
endchoice endchoice
source "arch/sh/mm/Kconfig" source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
menu "Processor features"
choice
prompt "Endianess selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big
endian byte order. These modes require different kernels.
config CPU_LITTLE_ENDIAN
bool "Little Endian"
config CPU_BIG_ENDIAN
bool "Big Endian"
endchoice
config SH_FPU
bool "FPU support"
depends on CPU_HAS_FPU
default y
help
Selecting this option will enable support for SH processors that
have FPU units (ie, SH77xx).
This option must be set in order to enable the FPU.
config SH_FPU_EMU
bool "FPU emulation support"
depends on !SH_FPU && EXPERIMENTAL
default n
help
Selecting this option will enable support for software FPU emulation.
Most SH-3 users will want to say Y here, whereas most SH-4 users will
want to say N.
config SH_DSP
bool "DSP support"
depends on CPU_HAS_DSP
default y
help
Selecting this option will enable support for SH processors that
have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
This option must be set in order to enable the DSP.
config SH_ADC
bool "ADC support"
depends on CPU_SH3
default y
help
Selecting this option will allow the Linux kernel to use SH3 on-chip
ADC module.
If unsure, say N.
config SH_STORE_QUEUES
bool "Support for Store Queues"
depends on CPU_SH4
help
Selecting this option will enable an in-kernel API for manipulating
the store queues integrated in the SH-4 processors.
config SPECULATIVE_EXECUTION
bool "Speculative subroutine return"
depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
help
This enables support for a speculative instruction fetch for
subroutine return. There are various pitfalls associated with
this, as outlined in the SH7780 hardware manual.
If unsure, say N.
config CPU_HAS_INTEVT
bool
config CPU_HAS_MASKREG_IRQ
bool
config CPU_HAS_IPR_IRQ
bool
config CPU_HAS_SR_RB
bool
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
accomplishing what is taken care of by the banked registers.
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
config CPU_HAS_PTEA
bool
config CPU_HAS_DSP
bool
config CPU_HAS_FPU
bool
endmenu
menu "Board support" menu "Board support"
......
...@@ -99,21 +99,7 @@ config CPU_SUBTYPE_SH5_103 ...@@ -99,21 +99,7 @@ config CPU_SUBTYPE_SH5_103
endchoice endchoice
choice source "arch/sh/Kconfig.cpu"
prompt "Endianness"
default LITTLE_ENDIAN
config LITTLE_ENDIAN
bool "Little-Endian"
config BIG_ENDIAN
bool "Big-Endian"
endchoice
config SH_FPU
bool "FPU support"
default y
config SH64_FPU_DENORM_FLUSH config SH64_FPU_DENORM_FLUSH
depends on SH_FPU depends on SH_FPU
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment