Commit 470c3822 authored by LABBE Corentin's avatar LABBE Corentin Committed by David S. Miller

phy: remove documentation of removed members of phy_device structure

Commit e5a03bfd ("phy: Add an mdio_device structure") removed addr,
bus and dev member of the phy_device structure.
This patch remove the documentation about those members.
Signed-off-by: default avatarLABBE Corentin <clabbe.montjoie@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3c4ef851
...@@ -327,8 +327,6 @@ struct phy_c45_device_ids { ...@@ -327,8 +327,6 @@ struct phy_c45_device_ids {
/* phy_device: An instance of a PHY /* phy_device: An instance of a PHY
* *
* drv: Pointer to the driver for this PHY instance * drv: Pointer to the driver for this PHY instance
* bus: Pointer to the bus this PHY is on
* dev: driver model device structure for this PHY
* phy_id: UID for this device found during discovery * phy_id: UID for this device found during discovery
* c45_ids: 802.3-c45 Device Identifers if is_c45. * c45_ids: 802.3-c45 Device Identifers if is_c45.
* is_c45: Set to true if this phy uses clause 45 addressing. * is_c45: Set to true if this phy uses clause 45 addressing.
...@@ -338,7 +336,6 @@ struct phy_c45_device_ids { ...@@ -338,7 +336,6 @@ struct phy_c45_device_ids {
* suspended: Set to true if this phy has been suspended successfully. * suspended: Set to true if this phy has been suspended successfully.
* state: state of the PHY for management purposes * state: state of the PHY for management purposes
* dev_flags: Device-specific flags used by the PHY driver. * dev_flags: Device-specific flags used by the PHY driver.
* addr: Bus address of PHY
* link_timeout: The number of timer firings to wait before the * link_timeout: The number of timer firings to wait before the
* giving up on the current attempt at acquiring a link * giving up on the current attempt at acquiring a link
* irq: IRQ number of the PHY's interrupt (-1 if none) * irq: IRQ number of the PHY's interrupt (-1 if none)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment