Merge tag 'v5.10-rockchip-dtsfixes1' of...

Merge tag 'v5.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Fixed ordering for MMC devices on rk3399, due to a mmc change jumbling
all ordering, a fix to make the Odroig Go Advance actually power down
and using the correct clock name on the NanoPi R2S.

* tag 'v5.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name

Link: https://lore.kernel.org/r/11641389.O9o76ZdvQC@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts

@@ -243,7 +243,6 @@ rk817: pmic@20 {
 		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int>;
-		rockchip,system-power-controller;
 		wakeup-source;
 		#clock-cells = <1>;
 		clock-output-names = "rk808-clkout1", "xin32k";

arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts

@@ -20,7 +20,7 @@ chosen {
 	gmac_clk: gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
-		clock-output-names = "gmac_clk";
+		clock-output-names = "gmac_clkin";
 		#clock-cells = <0>;
 	};
 

arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi

@@ -74,14 +74,14 @@ diy_led: led-1 {
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc1";
+			linux,default-trigger = "mmc2";
 		};
 
 		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc0";
+			linux,default-trigger = "mmc1";
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -29,6 +29,9 @@ aliases {
 		i2c6 = &i2c6;
 		i2c7 = &i2c7;
 		i2c8 = &i2c8;
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;