Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/pat

arch/i386/defconfig

@@ -5,11 +5,12 @@ CONFIG_X86=y
 CONFIG_ISA=y
 # CONFIG_SBUS is not set
 CONFIG_UID16=y
+CONFIG_GENERIC_ISA_DMA=y
 
 #
 # Code maturity level options
 #
-# CONFIG_EXPERIMENTAL is not set
+CONFIG_EXPERIMENTAL=y
 
 #
 # General setup
@@ -57,6 +58,9 @@ CONFIG_X86_L1_CACHE_SHIFT=5
 CONFIG_X86_TSC=y
 CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_SMP=y
+# CONFIG_PREEMPT is not set
+# CONFIG_MULTIQUAD is not set
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_NONFATAL=y
 CONFIG_X86_MCE_P4THERMAL=y
@@ -70,19 +74,22 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_HIGHMEM64G is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_MTRR is not set
-CONFIG_SMP=y
-# CONFIG_PREEMPT is not set
-# CONFIG_MULTIQUAD is not set
 CONFIG_HAVE_DEC_LOCK=y
 
 #
-# General options
+# Power management options (ACPI, APM)
 #
 
 #
 # ACPI Support
 #
 # CONFIG_ACPI is not set
+CONFIG_PM=y
+# CONFIG_APM is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
 CONFIG_X86_IO_APIC=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_PCI=y
@@ -112,14 +119,15 @@ CONFIG_CARDBUS=y
 # CONFIG_HOTPLUG_PCI_COMPAQ is not set
 # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
 # CONFIG_HOTPLUG_PCI_IBM is not set
+
+#
+# Executable file formats
+#
 CONFIG_KCORE_ELF=y
 # CONFIG_KCORE_AOUT is not set
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-# CONFIG_APM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -133,6 +141,8 @@ CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_PC_PCMCIA is not set
 # CONFIG_PARPORT_AMIGA is not set
 # CONFIG_PARPORT_MFC3 is not set
@@ -147,6 +157,7 @@ CONFIG_PARPORT_PC_CML1=y
 #
 CONFIG_PNP=y
 CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
@@ -158,131 +169,97 @@ CONFIG_BLK_DEV_FD=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_BLK_DEV_INITRD is not set
 
 #
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_VLAN_8021Q is not set
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL device support
 #
 CONFIG_IDE=y
 
 #
-# ATA and ATAPI Block devices
+# IDE, ATA and ATAPI Block devices
 #
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
+# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
+# CONFIG_BLK_DEV_IDEDISK_IBM is not set
+# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
+# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
+# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
+# CONFIG_BLK_DEV_IDEDISK_WD is not set
+# CONFIG_BLK_DEV_COMMERIAL is not set
+# CONFIG_BLK_DEV_TIVO is not set
 # CONFIG_BLK_DEV_IDECS is not set
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
 
 #
-# IDE chipset support
+# IDE chipset support/bugfixes
 #
 CONFIG_BLK_DEV_CMD640=y
 # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
 # CONFIG_BLK_DEV_ISAPNP is not set
 CONFIG_BLK_DEV_RZ1000=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
 CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_PCI_WIP is not set
+# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
 # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_AEC62XX_TUNING is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_WDC_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_AMD74XX_OVERRIDE is not set
 # CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_CMD680 is not set
 # CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_HPT34X_AUTODMA is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 CONFIG_BLK_DEV_PIIX=y
+CONFIG_PIIX_TUNING=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_ADMA100 is not set
 # CONFIG_BLK_DEV_PDC202XX is not set
 # CONFIG_PDC202XX_BURST is not set
 # CONFIG_PDC202XX_FORCE is not set
+CONFIG_BLK_DEV_RZ1000=y
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_IVB is not set
 CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_DMA_NONPCI is not set
+CONFIG_BLK_DEV_IDE_MODES=y
 
 #
-# SCSI support
+# SCSI device support
 #
 CONFIG_SCSI=y
 
@@ -293,8 +270,10 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SD_EXTRA_DEVS=40
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SR_EXTRA_DEVS=2
+CONFIG_CHR_DEV_SG=y
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -312,7 +291,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_DPT_I2O is not set
@@ -346,6 +324,7 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
 # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
+# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PCI2000 is not set
 # CONFIG_SCSI_PCI2220I is not set
@@ -361,12 +340,30 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_DEBUG is not set
 
 #
 # PCMCIA SCSI adapter support
 #
 # CONFIG_SCSI_PCMCIA is not set
 
+#
+# Old non-SCSI/ATAPI CD-ROM drives
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
 #
 # Fusion MPT device support
 #
@@ -376,6 +373,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_FUSION_CTL is not set
 # CONFIG_FUSION_LAN is not set
 
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
 #
 # I2O device support
 #
@@ -386,6 +388,47 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_I2O_SCSI is not set
 # CONFIG_I2O_PROC is not set
 
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_IPV6 is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
 #
 # Network device support
 #
@@ -399,6 +442,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
 # CONFIG_NET_SB1000 is not set
 
 #
@@ -460,6 +504,7 @@ CONFIG_E100=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -474,6 +519,8 @@ CONFIG_E100=y
 #
 # CONFIG_TR is not set
 # CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
 
 #
 # Wan interfaces
@@ -481,7 +528,7 @@ CONFIG_E100=y
 # CONFIG_WAN is not set
 
 #
-# "Tulip" family network device support
+# Tulip family network device support
 #
 # CONFIG_NET_TULIP is not set
 
@@ -519,96 +566,98 @@ CONFIG_PCMCIA_RAYCS=y
 # CONFIG_ISDN_BOOL is not set
 
 #
-# Old CD-ROM drivers (not SCSI, not IDE)
+# Telephony Support
 #
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
-# CONFIG_INPUT_EMU10K1 is not set
-# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
 # CONFIG_GAMEPORT_CS461x is not set
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_I8042_REG_BASE=60
+CONFIG_I8042_KBD_IRQ=1
+CONFIG_I8042_AUX_IRQ=12
 # CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+# CONFIG_INPUT_JOYDUMP is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-# CONFIG_SERIAL_CONSOLE is not set
-# CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-CONFIG_MOUSE=y
-CONFIG_PSMOUSE=y
-# CONFIG_82C710_MOUSE is not set
-# CONFIG_PC110_PAD is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-CONFIG_AGP=y
-CONFIG_AGP_INTEL=y
-CONFIG_AGP_I810=y
-CONFIG_AGP_VIA=y
-# CONFIG_AGP_AMD is not set
-CONFIG_AGP_SIS=y
-CONFIG_AGP_ALI=y
-# CONFIG_AGP_SWORKS is not set
-CONFIG_DRM=y
-CONFIG_DRM_TDFX=y
-# CONFIG_DRM_GAMMA is not set
-# CONFIG_DRM_R128 is not set
-CONFIG_DRM_RADEON=y
-# CONFIG_DRM_I810 is not set
-# CONFIG_DRM_MGA is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
 
 #
 # Multimedia devices
@@ -619,6 +668,8 @@ CONFIG_DRM_RADEON=y
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_REISERFS_FS is not set
@@ -707,6 +758,12 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VIDEO_SELECT is not set
+# CONFIG_MDA_CONSOLE is not set
+
+#
+# Frame-buffer support
+#
+# CONFIG_FB is not set
 
 #
 # Sound
@@ -731,6 +788,8 @@ CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_RTCTIMER is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DEBUG_MEMORY is not set
+# CONFIG_SND_DEBUG_DETECT is not set
 
 #
 # Generic devices
@@ -776,12 +835,14 @@ CONFIG_SND_SEQUENCER_OSS=y
 #
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_ALS4000 is not set
@@ -817,14 +878,14 @@ CONFIG_USB=y
 #
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_ALT=y
-# CONFIG_USB_OHCI is not set
+# CONFIG_USB_UHCI_HCD_ALT is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_AUDIO is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 CONFIG_USB_STORAGE=y
@@ -835,21 +896,24 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_HP8200e is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 
 #
 # USB Human Interface Devices (HID)
 #
 # CONFIG_USB_HID is not set
-
-#
-#     Input core support is needed for USB HID input layer or HIDBP support
-#
 # CONFIG_USB_HIDINPUT is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
+# CONFIG_LOGITECH_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_XPAD is not set
 
 #
 # USB Imaging devices
@@ -905,6 +969,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
 # CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
@@ -934,12 +999,25 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
 
 #
 # Kernel hacking
 #
+# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_DEBUG_KERNEL is not set
 
+#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
 #
 # Library routines
 #

drivers/char/Config.in

@@ -57,7 +57,7 @@ if [ "$CONFIG_IT8712" = "y" ]; then
    bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
    if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
      define_bool CONFIG_IT8172_CIR y
-   else
+   fi
    bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
    bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
 fi

drivers/char/keyboard.c

@@ -40,7 +40,6 @@
 #include <linux/kbd_diacr.h>
 #include <linux/vt_kern.h>
 #include <linux/sysrq.h>
-#include <linux/pm.h>
 #include <linux/input.h>
 
 static void kbd_disconnect(struct input_handle *handle);
@@ -50,6 +49,22 @@ extern void ctrl_alt_del(void);
  * Exported functions/variables
  */
 
+#ifndef KBD_DEFMODE
+#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
+#endif
+
+#ifndef KBD_DEFLEDS
+/*
+ * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
+ * This seems a good reason to start with NumLock off.
+ */
+#define KBD_DEFLEDS 0
+#endif
+
+#ifndef KBD_DEFLOCK
+#define KBD_DEFLOCK 0
+#endif
+
 struct pt_regs *kbd_pt_regs;
 void compute_shiftstate(void);
 
@@ -94,6 +109,7 @@ const int NR_TYPES = ARRAY_SIZE(max_vals);
 
 struct kbd_struct kbd_table[MAX_NR_CONSOLES];
 static struct kbd_struct *kbd = kbd_table;
+static struct kbd_struct kbd0;
 
 int spawnpid, spawnsig;
 
@@ -124,6 +140,21 @@ static struct ledptr {
 	unsigned char valid:1;
 } ledptrs[3];
 
+/* Simple translation table for the SysRq keys */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned char kbd_sysrq_xlate[128] =
+        "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
+        "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
+        "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
+        "bnm,./\000*\000 \000\201\202\203\204\205"      /* 0x30 - 0x3f */
+        "\206\207\210\211\212\000\000789-456+1"         /* 0x40 - 0x4f */
+        "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
+        "\r\000/";                                      /* 0x60 - 0x6f */
+static int sysrq_down;
+#endif
+static int sysrq_alt;
+
 /*
  * Translation of scancodes to keycodes. We set them on only the first attached
  * keyboard - for per-keyboard setting, /dev/input/event is more useful.
@@ -314,7 +345,7 @@ void compute_shiftstate(void)
 		if (!key_down[i])
 			continue;
 
-		k = i*BITS_PER_LONG;
+		k = i * BITS_PER_LONG;
 
 		for (j = 0; j < BITS_PER_LONG; j++, k++) {
 
@@ -861,8 +892,6 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
 
 #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) || defined(CONFIG_MIPS) || defined(CONFIG_PPC)
 
-static int x86_sysrq_alt = 0;
-
 static unsigned short x86_keycodes[256] =
 	{ 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
 	 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
@@ -902,7 +931,7 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 		return 0;
 	} 
 
-	if (keycode == KEY_SYSRQ && x86_sysrq_alt) {
+	if (keycode == KEY_SYSRQ && sysrq_alt) {
 		put_queue(vc, 0x54 | up_flag);
 		return 0;
 	}
@@ -917,9 +946,6 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 		put_queue(vc, 0x37 | up_flag);
 	}
 
-	if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
-		x86_sysrq_alt = !up_flag;
-
 	return 0;
 }
 
@@ -957,10 +983,26 @@ void kbd_keycode(unsigned int keycode, int down)
 
 	kbd = kbd_table + fg_console;
 
+	if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
+		sysrq_alt = down;
+
+	rep = (down == 2);
+
 	if ((raw_mode = (kbd->kbdmode == VC_RAW)))
 		if (emulate_raw(vc, keycode, !down << 7))
 			printk(KERN_WARNING "keyboard.c: can't emulate rawmode for keycode %d\n", keycode);
 
+#ifdef CONFIG_MAGIC_SYSRQ	       /* Handle the SysRq Hack */
+	if (keycode == KEY_SYSRQ && !rep) {
+		sysrq_down = sysrq_alt && down;
+		return;
+	}
+	if (sysrq_down && down && !rep) {
+		handle_sysrq(kbd_sysrq_xlate[keycode], kbd_pt_regs, tty);
+		return;
+	}
+#endif
+
 	if (kbd->kbdmode == VC_MEDIUMRAW) {
 		/*
 		 * This is extended medium raw mode, with keys above 127
@@ -981,7 +1023,10 @@ void kbd_keycode(unsigned int keycode, int down)
 		raw_mode = 1;
 	}
 
-	rep = (down == 2);
+	if (down)
+		set_bit(keycode, key_down);
+	else
+		clear_bit(keycode, key_down);
 
 	if (rep && (!vc_kbd_mode(kbd, VC_REPEAT) || (tty && 
 		(!L_ECHO(tty) && tty->driver.chars_in_buffer(tty))))) {
@@ -1037,6 +1082,8 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
 		return;
 	kbd_keycode(keycode, down);
 	tasklet_schedule(&keyboard_tasklet);
+	do_poke_blanked_console = 1;
+	schedule_console_callback();
 }
 
 static char kbd_name[] = "kbd";
@@ -1105,6 +1152,18 @@ static struct input_handler kbd_handler = {
 
 int __init kbd_init(void)
 {
+	int i;
+
+        kbd0.ledflagstate = kbd0.default_ledflagstate = KBD_DEFLEDS;
+        kbd0.ledmode = LED_SHOW_FLAGS;
+        kbd0.lockstate = KBD_DEFLOCK;
+        kbd0.slockstate = 0;
+        kbd0.modeflags = KBD_DEFMODE;
+        kbd0.kbdmode = VC_XLATE;
+
+        for (i = 0 ; i < MAX_NR_CONSOLES ; i++)
+                kbd_table[i] = kbd0;
+
 	tasklet_enable(&keyboard_tasklet);
 	tasklet_schedule(&keyboard_tasklet);
 	input_register_handler(&kbd_handler);

drivers/input/Config.in

@@ -5,7 +5,7 @@
 mainmenu_option next_comment
 comment 'Input device support'
 
-tristate 'Input core support' CONFIG_INPUT
+define_tristate CONFIG_INPUT y
 
 comment 'Userland interfaces'
 dep_tristate '  Mouse interface' CONFIG_INPUT_MOUSEDEV $CONFIG_INPUT

drivers/input/serio/i8042.c

@@ -61,6 +61,8 @@ struct timer_list i8042_timer;
 static unsigned long i8042_start;
 #endif
 
+extern struct pt_regs *kbd_pt_regs;
+
 static unsigned long i8042_unxlate_seen[128 / BITS_PER_LONG];
 static unsigned char i8042_unxlate_table[128] = {
 	  0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
@@ -346,6 +348,10 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	unsigned char str, data;
 	unsigned int dfl;
 
+#ifdef CONFIG_VT
+	kbd_pt_regs = regs;
+#endif
+
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	while ((str = i8042_read_status()) & I8042_STR_OBF) {